From e54882aefb5c906e460cb7c84bb072f360b29680 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@denx.de>
Date: Thu, 16 Feb 2023 07:08:49 -0300
Subject: mx6sabresd: Convert to DM_PMIC

The usage of DM_PMIC is preferred, so convert to it.

This also brings the benefit of causing a significant amount
of code removal.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
 board/freescale/mx6sabresd/mx6sabresd.c | 63 +++++++--------------------------
 1 file changed, 13 insertions(+), 50 deletions(-)

(limited to 'board/freescale')

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 8c35230..96a76b0 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -17,7 +17,6 @@
 #include <env.h>
 #include <linux/errno.h>
 #include <asm/gpio.h>
-#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
@@ -28,7 +27,6 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
-#include <i2c.h>
 #include <input.h>
 #include <power/pmic.h>
 #include <power/pfuze100_pmic.h>
@@ -49,14 +47,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
 		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
-#define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
-	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define I2C_PMIC	1
-
-#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
-
 #define DISP0_PWR_EN	IMX_GPIO_NR(1, 21)
 
 #define KEY_VOL_UP	IMX_GPIO_NR(1, 4)
@@ -174,32 +164,6 @@ static void enable_lvds(struct display_info_t const *dev)
 	enable_backlight();
 }
 
-static struct i2c_pads_info mx6q_i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
-		.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
-		.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 13)
-	}
-};
-
-static struct i2c_pads_info mx6dl_i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
-		.gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		.i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
-		.gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
-		.gp = IMX_GPIO_NR(4, 13)
-	}
-};
-
 static void setup_spi(void)
 {
 	SETUP_IOMUX_PADS(ecspi1_pads);
@@ -495,10 +459,7 @@ int board_init(void)
 #ifdef CONFIG_MXC_SPI
 	setup_spi();
 #endif
-	if (is_mx6dq() || is_mx6dqp())
-		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
-	else
-		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
+
 #if defined(CONFIG_VIDEO_IPUV3)
 	setup_display();
 #endif
@@ -511,29 +472,32 @@ int board_init(void)
 
 int power_init_board(void)
 {
-	struct pmic *p;
+	struct udevice *dev;
 	unsigned int reg;
 	int ret;
 
-	p = pfuze_common_init(I2C_PMIC);
-	if (!p)
-		return -ENODEV;
+	ret = pmic_get("pfuze100@8", &dev);
+	if (ret == -ENODEV)
+		return 0;
+
+	if (ret != 0)
+		return ret;
 
-	ret = pfuze_mode_init(p, APS_PFM);
+	ret = pfuze_mode_init(dev, APS_PFM);
 	if (ret < 0)
 		return ret;
 
 	/* Increase VGEN3 from 2.5 to 2.8V */
-	pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
+	reg = pmic_reg_read(dev, PFUZE100_VGEN3VOL);
 	reg &= ~LDO_VOL_MASK;
 	reg |= LDOB_2_80V;
-	pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
+	pmic_reg_write(dev, PFUZE100_VGEN3VOL, reg);
 
 	/* Increase VGEN5 from 2.8 to 3V */
-	pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
+	reg = pmic_reg_read(dev, PFUZE100_VGEN5VOL);
 	reg &= ~LDO_VOL_MASK;
 	reg |= LDOB_3_00V;
-	pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
+	pmic_reg_write(dev, PFUZE100_VGEN5VOL, reg);
 
 	return 0;
 }
@@ -902,7 +866,6 @@ void board_init_f(ulong dummy)
 	ccgr_init();
 	gpr_init();
 
-	/* iomux and setup of i2c */
 	board_early_init_f();
 
 	/* setup GP timer */
-- 
cgit v1.1