From a6cc6c37188d85c25d167a4515da86f48d9a583e Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Sun, 30 Mar 2008 18:52:06 +0200 Subject: ppc4xx: Add ptm configuration variables for PMC440 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms environment variables. Cleanup pci_target_init. Signed-off-by: Matthias Fuchs --- board/esd/pmc440/pmc440.c | 86 +++++++++++++++++++++++++++++------------------ 1 file changed, 54 insertions(+), 32 deletions(-) (limited to 'board/esd/pmc440') diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index edf3a14..f1cfef2 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -512,55 +512,75 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. +/* + * pci_target_init * - ************************************************************************/ + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - /*--------------------------------------------------------------------------+ + char *ptmla_str, *ptmms_str; + + /* * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440EPX PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + */ + /* + * PowerPC440EPX PCI Master configuration. + * Map one 1Gig range of PLB/processor addresses to PCI memory space. + * PLB address 0x80000000-0xBFFFFFFF + * ==> PCI address 0x80000000-0xBFFFFFFF + * Use byte reversed out routines to handle endianess. + * Make this region non-prefetchable. + */ + out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ + /* - disabled b4 setting */ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, and enable region */ + out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */ + /* and enable region */ if (!is_monarch()) { - /* BAR1: top 64MB of RAM */ - out32r(PCIX0_PTM1MS, 0xfc000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0x0c000000); /* Local Addr. Reg */ + ptmla_str = getenv("ptm1la"); + ptmms_str = getenv("ptm1ms"); + if(NULL != ptmla_str && NULL != ptmms_str ) { + out32r(PCIX0_PTM1MS, + simple_strtoul(ptmms_str, NULL, 16)); + out32r(PCIX0_PTM1LA, + simple_strtoul(ptmla_str, NULL, 16)); + } else { + /* BAR1: default top 64MB of RAM */ + out32r(PCIX0_PTM1MS, 0xfc000001); + out32r(PCIX0_PTM1LA, 0x0c000000); + } } else { - /* BAR1: complete 256MB RAM (TODO: make dynamic) */ - out32r(PCIX0_PTM1MS, 0xf0000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0x00000000); /* Local Addr. Reg */ + /* BAR1: default: complete 256MB RAM */ + out32r(PCIX0_PTM1MS, 0xf0000001); + out32r(PCIX0_PTM1LA, 0x00000000); } - /* BAR2: 16 MB FPGA registers */ - out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ + ptmla_str = getenv("ptm2la"); /* Local Addr. Reg */ + ptmms_str = getenv("ptm2ms"); /* Memory Size/Attribute */ + if(NULL != ptmla_str && NULL != ptmms_str ) { + out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16)); + out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16)); + } else { + /* BAR2: default: 16 MB FPGA + registers */ + out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */ + out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ + } if (is_monarch()) { /* BAR2: map FPGA registers behind system memory at 1GB */ pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008); } - /*--------------------------------------------------------------------------+ + /* * Set up Configuration registers - *--------------------------------------------------------------------------*/ + */ /* Program the board's vendor id */ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, @@ -587,8 +607,10 @@ void pci_target_init(struct pci_controller *hose) CFG_PCI_CLASSCODE_NONMONARCH); /* PCI configuration done: release ERREADY */ - out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY); - out_be32((void*)GPIO1_TCR, in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY); + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY); + out_be32((void*)GPIO1_TCR, + in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY); } else { /* Program the board's subsystem id/classcode */ pci_write_config_word(0, PCI_SUBSYSTEM_ID, -- cgit v1.1