From d8d3b77fc2c12cccf983f6f9e58cd0a0a326aa41 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 9 Feb 2021 21:42:47 -0500 Subject: arm: Remove dms-ba16 board This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Akshay Bhat Cc: Ken Lin Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 92fb4c4..537743e 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -111,12 +111,6 @@ choice prompt "MX6 board select" optional -config TARGET_ADVANTECH_DMS_BA16 - bool "Advantech dms-ba16" - depends on MX6Q - select BOARD_LATE_INIT - imply CMD_SATA - config TARGET_APALIS_IMX6 bool "Toradex Apalis iMX6 board" depends on MX6Q @@ -695,7 +689,6 @@ config SYS_SOC source "board/ge/bx50v3/Kconfig" source "board/ge/b1x5v2/Kconfig" -source "board/advantech/dms-ba16/Kconfig" source "board/aristainetos/Kconfig" source "board/armadeus/opos6uldev/Kconfig" source "board/bachmann/ot1200/Kconfig" -- cgit v1.1 From c861d21cba44fe068e9a47dfcf57f7e84c54d73e Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 9 Feb 2021 21:42:48 -0500 Subject: arm: Remove ot1200 board This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. In order to convert to using the DWC SATA driver under DM further migrations are required. Cc: Christian Gmeiner Signed-off-by: Tom Rini Acked-by: Christian Gmeiner --- arch/arm/mach-imx/mx6/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 537743e..e5e1ce3 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -470,11 +470,6 @@ config TARGET_OPOS6ULDEV depends on MX6UL select MX6UL_OPOS6UL -config TARGET_OT1200 - bool "Bachmann OT1200" - select SUPPORT_SPL - imply CMD_SATA - config TARGET_PICO_IMX6 bool "PICO-IMX6" depends on MX6QDL @@ -691,7 +686,6 @@ source "board/ge/bx50v3/Kconfig" source "board/ge/b1x5v2/Kconfig" source "board/aristainetos/Kconfig" source "board/armadeus/opos6uldev/Kconfig" -source "board/bachmann/ot1200/Kconfig" source "board/barco/platinum/Kconfig" source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" -- cgit v1.1 From 34af2da9ad6ba940e0a4ad0cffec26488042a34c Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 9 Feb 2021 21:42:50 -0500 Subject: ppc: Remove MPC8349ITX board This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc83xx/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 2bae08e..f34acf7 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -75,11 +75,6 @@ config TARGET_MPC8349EMDS_SDRAM select SYS_FSL_DDR_BE select SYS_FSL_HAS_DDR2 -config TARGET_MPC8349ITX - bool "Support MPC8349ITX" - select ARCH_MPC8349 - imply CMD_IRQ - config TARGET_MPC837XEMDS bool "Support MPC837XEMDS" select ARCH_MPC837X @@ -336,7 +331,6 @@ source "board/freescale/mpc8315erdb/Kconfig" source "board/freescale/mpc8323erdb/Kconfig" source "board/freescale/mpc832xemds/Kconfig" source "board/freescale/mpc8349emds/Kconfig" -source "board/freescale/mpc8349itx/Kconfig" source "board/freescale/mpc837xemds/Kconfig" source "board/freescale/mpc837xerdb/Kconfig" source "board/ids/ids8313/Kconfig" -- cgit v1.1 From a80e03683ba8c343b07e8e48253fe85b43fc50b8 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 9 Feb 2021 21:42:56 -0500 Subject: drivers: ata: Remove mvsata_ide driver The mvsata_ide driver was due for DM conversion by v2019.07. As that has long passed, remove the driver and disable it in the boards which had enabled it. Signed-off-by: Tom Rini --- arch/arm/mach-kirkwood/include/mach/config.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index 4794f7a..f5538f4 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -74,8 +74,6 @@ */ #ifdef CONFIG_IDE #define __io -#define CONFIG_IDE_PREINIT -#define CONFIG_MVSATA_IDE_USE_PORT1 /* Needs byte-swapping for ATA data register */ #define CONFIG_IDE_SWAP_IO /* Data, registers and alternate blocks are at the same offset */ -- cgit v1.1 From 539fba2c10e7e288dafe253e5fd8386cdeb1e736 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:38 -0500 Subject: arm: Remove xfi3 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Marek Vasut Signed-off-by: Tom Rini --- arch/arm/mach-imx/mxs/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index bcd8400..57e6992 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -30,7 +30,6 @@ config SYS_SOC source "board/olimex/mx23_olinuxino/Kconfig" source "board/freescale/mx23evk/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" -source "board/creative/xfi3/Kconfig" endif -- cgit v1.1 From b40186fc7e1ceb72027ce1ded0107597c82e80fc Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:40 -0500 Subject: arm: Remove SANSA_FUZE_PLUS board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Marek Vasut Signed-off-by: Tom Rini --- arch/arm/mach-imx/mxs/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index 57e6992..677fd14 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -16,9 +16,6 @@ config TARGET_MX23EVK bool "Support mx23evk" select BOARD_EARLY_INIT_F -config TARGET_SANSA_FUZE_PLUS - bool "Support sansa_fuze_plus" - config TARGET_XFI3 bool "Support xfi3" @@ -29,7 +26,6 @@ config SYS_SOC source "board/olimex/mx23_olinuxino/Kconfig" source "board/freescale/mx23evk/Kconfig" -source "board/sandisk/sansa_fuze_plus/Kconfig" endif -- cgit v1.1 From 0fa6bafa89dcf3a3fc85ac2fc9c83398f2189740 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:41 -0500 Subject: arm: Remove sc_sps_1 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Marek Vasut Signed-off-by: Tom Rini --- arch/arm/mach-imx/mxs/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index 677fd14..f15dfb9 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -46,9 +46,6 @@ config TARGET_MX28EVK bool "Support mx28evk" select BOARD_EARLY_INIT_F -config TARGET_SC_SPS_1 - bool "Support sc_sps_1" - config TARGET_TS4600 bool "Support TS4600" @@ -63,7 +60,6 @@ config SYS_SOC source "board/freescale/mx28evk/Kconfig" source "board/liebherr/xea/Kconfig" source "board/ppcag/bg0900/Kconfig" -source "board/schulercontrol/sc_sps_1/Kconfig" source "board/technologic/ts4600/Kconfig" endif -- cgit v1.1 From be3dec48b0e53e3b14a8fc742e4409cce3475421 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:42 -0500 Subject: arm: Remove ts4600 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Sebastien Bourdelin Signed-off-by: Tom Rini --- arch/arm/mach-imx/mxs/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index f15dfb9..9f48ffd 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -46,9 +46,6 @@ config TARGET_MX28EVK bool "Support mx28evk" select BOARD_EARLY_INIT_F -config TARGET_TS4600 - bool "Support TS4600" - config TARGET_XEA bool "Support XEA" @@ -60,6 +57,5 @@ config SYS_SOC source "board/freescale/mx28evk/Kconfig" source "board/liebherr/xea/Kconfig" source "board/ppcag/bg0900/Kconfig" -source "board/technologic/ts4600/Kconfig" endif -- cgit v1.1 From 4652bef1b60d2be38cfbfd87b0e2e92b8e324661 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:43 -0500 Subject: arm: Remove apf27 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Philippe Reynes Cc: Eric Jarrige Signed-off-by: Tom Rini --- arch/arm/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 76adf7f..25f4362 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -561,11 +561,6 @@ config ARCH_MVEBU select SPI imply CMD_DM -config TARGET_APF27 - bool "Support apf27" - select CPU_ARM926EJS - select SUPPORT_SPL - config ARCH_ORION5X bool "Marvell Orion" select CPU_ARM926EJS @@ -1969,7 +1964,6 @@ source "board/Marvell/aspenite/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/Marvell/octeontx/Kconfig" source "board/Marvell/octeontx2/Kconfig" -source "board/armadeus/apf27/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" -- cgit v1.1 From c6c26a05b89f25a06e7562f8c2071b60fd0c9eac Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:47 -0500 Subject: arm: Remove vexpress_ca15_tc2 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Linus Walleij Signed-off-by: Tom Rini --- arch/arm/Kconfig | 18 - arch/arm/dts/Makefile | 4 - arch/arm/dts/vexpress-v2m-rs1.dtsi | 437 ---------------------- arch/arm/dts/vexpress-v2m.dtsi | 451 ---------------------- arch/arm/dts/vexpress-v2p-ca15_a7.dts | 682 ---------------------------------- arch/arm/dts/vexpress-v2p-ca5s.dts | 280 -------------- arch/arm/dts/vexpress-v2p-ca9.dts | 368 ------------------ 7 files changed, 2240 deletions(-) delete mode 100644 arch/arm/dts/vexpress-v2m-rs1.dtsi delete mode 100644 arch/arm/dts/vexpress-v2m.dtsi delete mode 100644 arch/arm/dts/vexpress-v2p-ca15_a7.dts delete mode 100644 arch/arm/dts/vexpress-v2p-ca5s.dts delete mode 100644 arch/arm/dts/vexpress-v2p-ca9.dts (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 25f4362..962331c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -645,13 +645,6 @@ config ARCH_BCM6858 select OF_CONTROL imply CMD_DM -config TARGET_VEXPRESS_CA15_TC2 - bool "Support vexpress_ca15_tc2" - select CPU_V7A - select CPU_V7_HAS_NONSEC - select CPU_V7_HAS_VIRT - select PL011_SERIAL - config ARCH_BCMSTB bool "Broadcom BCM7XXX family" select CPU_V7A @@ -663,16 +656,6 @@ config ARCH_BCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. -config TARGET_VEXPRESS_CA5X2 - bool "Support vexpress_ca5x2" - select CPU_V7A - select PL011_SERIAL - -config TARGET_VEXPRESS_CA9X4 - bool "Support vexpress_ca9x4" - select CPU_V7A - select PL011_SERIAL - config TARGET_BCM23550_W1D bool "Support bcm23550_w1d" select CPU_V7A @@ -1964,7 +1947,6 @@ source "board/Marvell/aspenite/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/Marvell/octeontx/Kconfig" source "board/Marvell/octeontx2/Kconfig" -source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm23550_w1d/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c09ce8f..d290c44 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1071,10 +1071,6 @@ dtb-$(CONFIG_TARGET_GE_BX50V3) += \ dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb -dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb -dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb -dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb - dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb diff --git a/arch/arm/dts/vexpress-v2m-rs1.dtsi b/arch/arm/dts/vexpress-v2m-rs1.dtsi deleted file mode 100644 index d3963e9..0000000 --- a/arch/arm/dts/vexpress-v2m-rs1.dtsi +++ /dev/null @@ -1,437 +0,0 @@ -/* - * ARM Ltd. Versatile Express - * - * Motherboard Express uATX - * V2M-P1 - * - * HBI-0190D - * - * RS1 memory map ("ARM Cortex-A Series memory map" in the board's - * Technical Reference Manual) - * - * WARNING! The hardware described in this file is independent from the - * original variant (vexpress-v2m.dtsi), but there is a strong - * correspondence between the two configurations. - * - * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT - * CHANGES TO vexpress-v2m.dtsi! - */ - -/ { - smb@8000000 { - motherboard { - model = "V2M-P1"; - arm,hbi = <0x190>; - arm,vexpress,site = <0>; - arm,v2m-memory-map = "rs1"; - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - #interrupt-cells = <1>; - ranges; - - flash@0,00000000 { - compatible = "arm,vexpress-flash", "cfi-flash"; - reg = <0 0x00000000 0x04000000>, - <4 0x00000000 0x04000000>; - bank-width = <4>; - }; - - psram@1,00000000 { - compatible = "arm,vexpress-psram", "mtd-ram"; - reg = <1 0x00000000 0x02000000>; - bank-width = <4>; - }; - - ethernet@2,02000000 { - compatible = "smsc,lan9118", "smsc,lan9115"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&v2m_fixed_3v3>; - vddvario-supply = <&v2m_fixed_3v3>; - }; - - usb@2,03000000 { - compatible = "nxp,usb-isp1761"; - reg = <2 0x03000000 0x20000>; - interrupts = <16>; - port1-otg; - }; - - iofpga@3,00000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 3 0 0x200000>; - - v2m_sysreg: sysreg@10000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x10000 0x1000>; - - v2m_led_gpios: gpio@8 { - compatible = "arm,vexpress-sysreg,sys_led"; - reg = <0x008 4>; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_mmc_gpios: gpio@48 { - compatible = "arm,vexpress-sysreg,sys_mci"; - reg = <0x048 4>; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_flash_gpios: gpio@4c { - compatible = "arm,vexpress-sysreg,sys_flash"; - reg = <0x04c 4>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - - v2m_sysctl: sysctl@20000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x020000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; - assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; - }; - - /* PCI-E I2C bus */ - v2m_i2c_pcie: i2c@30000 { - compatible = "arm,versatile-i2c"; - reg = <0x030000 0x1000>; - - #address-cells = <1>; - #size-cells = <0>; - - pcie-switch@60 { - compatible = "idt,89hpes32h8"; - reg = <0x60>; - }; - }; - - aaci@40000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x040000 0x1000>; - interrupts = <11>; - clocks = <&smbclk>; - clock-names = "apb_pclk"; - }; - - mmci@50000 { - compatible = "arm,pl180", "arm,primecell"; - reg = <0x050000 0x1000>; - interrupts = <9>, <10>; - cd-gpios = <&v2m_mmc_gpios 0 0>; - wp-gpios = <&v2m_mmc_gpios 1 0>; - max-frequency = <12000000>; - vmmc-supply = <&v2m_fixed_3v3>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "mclk", "apb_pclk"; - }; - - kmi@60000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x060000 0x1000>; - interrupts = <12>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - kmi@70000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x070000 0x1000>; - interrupts = <13>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - v2m_serial0: uart@90000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial1: uart@a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial2: uart@b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial3: uart@c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - wdt@f0000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0f0000 0x1000>; - interrupts = <0>; - clocks = <&v2m_refclk32khz>, <&smbclk>; - clock-names = "wdogclk", "apb_pclk"; - }; - - v2m_timer01: timer@110000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x110000 0x1000>; - interrupts = <2>; - clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; - - v2m_timer23: timer@120000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <3>; - clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; - - /* DVI I2C bus */ - v2m_i2c_dvi: i2c@160000 { - compatible = "arm,versatile-i2c"; - reg = <0x160000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - dvi-transmitter@39 { - compatible = "sil,sii9022-tpi", "sil,sii9022"; - reg = <0x39>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dvi_bridge_in: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - }; - }; - - dvi-transmitter@60 { - compatible = "sil,sii9022-cpi", "sil,sii9022"; - reg = <0x60>; - }; - }; - - rtc@170000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x170000 0x1000>; - interrupts = <4>; - clocks = <&smbclk>; - clock-names = "apb_pclk"; - }; - - compact-flash@1a0000 { - compatible = "arm,vexpress-cf", "ata-generic"; - reg = <0x1a0000 0x100 - 0x1a0100 0xf00>; - reg-shift = <2>; - }; - - clcd@1f0000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x1f0000 0x1000>; - interrupt-names = "combined"; - interrupts = <14>; - clocks = <&v2m_oscclk1>, <&smbclk>; - clock-names = "clcdclk", "apb_pclk"; - /* 800x600 16bpp @36MHz works fine */ - max-memory-bandwidth = <54000000>; - memory-region = <&vram>; - - port { - clcd_pads: endpoint { - remote-endpoint = <&dvi_bridge_in>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; - }; - }; - }; - - v2m_fixed_3v3: fixed-regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - leds { - compatible = "gpio-leds"; - - user1 { - label = "v2m:green:user1"; - gpios = <&v2m_led_gpios 0 0>; - linux,default-trigger = "heartbeat"; - }; - - user2 { - label = "v2m:green:user2"; - gpios = <&v2m_led_gpios 1 0>; - linux,default-trigger = "mmc0"; - }; - - user3 { - label = "v2m:green:user3"; - gpios = <&v2m_led_gpios 2 0>; - linux,default-trigger = "cpu0"; - }; - - user4 { - label = "v2m:green:user4"; - gpios = <&v2m_led_gpios 3 0>; - linux,default-trigger = "cpu1"; - }; - - user5 { - label = "v2m:green:user5"; - gpios = <&v2m_led_gpios 4 0>; - linux,default-trigger = "cpu2"; - }; - - user6 { - label = "v2m:green:user6"; - gpios = <&v2m_led_gpios 5 0>; - linux,default-trigger = "cpu3"; - }; - - user7 { - label = "v2m:green:user7"; - gpios = <&v2m_led_gpios 6 0>; - linux,default-trigger = "cpu4"; - }; - - user8 { - label = "v2m:green:user8"; - gpios = <&v2m_led_gpios 7 0>; - linux,default-trigger = "cpu5"; - }; - }; - - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - oscclk0 { - /* MCC static memory clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <25000000 60000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk0"; - }; - - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 65000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; - - v2m_oscclk2: oscclk2 { - /* IO FPGA peripheral clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <24000000 24000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk2"; - }; - - volt-vio { - /* Logic level voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "VIO"; - regulator-always-on; - label = "VIO"; - }; - - temp-mcc { - /* MCC internal operating temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "MCC"; - }; - - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; - - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; - - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; - - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; - - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; - }; - }; - }; - }; -}; diff --git a/arch/arm/dts/vexpress-v2m.dtsi b/arch/arm/dts/vexpress-v2m.dtsi deleted file mode 100644 index 798c97a..0000000 --- a/arch/arm/dts/vexpress-v2m.dtsi +++ /dev/null @@ -1,451 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARM Ltd. Versatile Express - * - * Motherboard Express uATX - * V2M-P1 - * - * HBI-0190D - * - * Original memory map ("Legacy memory map" in the board's - * Technical Reference Manual) - * - * WARNING! The hardware described in this file is independent from the - * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong - * correspondence between the two configurations. - * - * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT - * CHANGES TO vexpress-v2m-rs1.dtsi! - */ - -/ { - smb@4000000 { - motherboard { - model = "V2M-P1"; - arm,hbi = <0x190>; - arm,vexpress,site = <0>; - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - #interrupt-cells = <1>; - ranges; - - flash@0,00000000 { - compatible = "arm,vexpress-flash", "cfi-flash"; - reg = <0 0x00000000 0x04000000>, - <1 0x00000000 0x04000000>; - bank-width = <4>; - }; - - psram@2,00000000 { - compatible = "arm,vexpress-psram", "mtd-ram"; - reg = <2 0x00000000 0x02000000>; - bank-width = <4>; - }; - - ethernet@3,02000000 { - compatible = "smsc,lan9118", "smsc,lan9115"; - reg = <3 0x02000000 0x10000>; - interrupts = <15>; - phy-mode = "mii"; - reg-io-width = <4>; - smsc,irq-active-high; - smsc,irq-push-pull; - vdd33a-supply = <&v2m_fixed_3v3>; - vddvario-supply = <&v2m_fixed_3v3>; - }; - - usb@3,03000000 { - compatible = "nxp,usb-isp1761"; - reg = <3 0x03000000 0x20000>; - interrupts = <16>; - port1-otg; - }; - - iofpga@7,00000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 7 0 0x20000>; - - v2m_sysreg: sysreg@0 { - compatible = "arm,vexpress-sysreg"; - reg = <0x00000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x1000>; - - v2m_led_gpios: gpio@8 { - compatible = "arm,vexpress-sysreg,sys_led"; - reg = <0x008 4>; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_mmc_gpios: gpio@48 { - compatible = "arm,vexpress-sysreg,sys_mci"; - reg = <0x048 4>; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_flash_gpios: gpio@4c { - compatible = "arm,vexpress-sysreg,sys_flash"; - reg = <0x04c 4>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - - v2m_sysctl: sysctl@1000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x01000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; - assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; - }; - - /* PCI-E I2C bus */ - v2m_i2c_pcie: i2c@2000 { - compatible = "arm,versatile-i2c"; - reg = <0x02000 0x1000>; - - #address-cells = <1>; - #size-cells = <0>; - - pcie-switch@60 { - compatible = "idt,89hpes32h8"; - reg = <0x60>; - }; - }; - - aaci@4000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x04000 0x1000>; - interrupts = <11>; - clocks = <&smbclk>; - clock-names = "apb_pclk"; - }; - - mmci@5000 { - compatible = "arm,pl180", "arm,primecell"; - reg = <0x05000 0x1000>; - interrupts = <9>, <10>; - cd-gpios = <&v2m_mmc_gpios 0 0>; - wp-gpios = <&v2m_mmc_gpios 1 0>; - max-frequency = <12000000>; - vmmc-supply = <&v2m_fixed_3v3>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "mclk", "apb_pclk"; - }; - - kmi@6000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x06000 0x1000>; - interrupts = <12>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - kmi@7000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x07000 0x1000>; - interrupts = <13>; - clocks = <&v2m_clk24mhz>, <&smbclk>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - v2m_serial0: uart@9000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x09000 0x1000>; - interrupts = <5>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial1: uart@a000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a000 0x1000>; - interrupts = <6>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial2: uart@b000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b000 0x1000>; - interrupts = <7>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial3: uart@c000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c000 0x1000>; - interrupts = <8>; - clocks = <&v2m_oscclk2>, <&smbclk>; - clock-names = "uartclk", "apb_pclk"; - }; - - wdt@f000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0f000 0x1000>; - interrupts = <0>; - clocks = <&v2m_refclk32khz>, <&smbclk>; - clock-names = "wdogclk", "apb_pclk"; - }; - - v2m_timer01: timer@11000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x11000 0x1000>; - interrupts = <2>; - clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; - - v2m_timer23: timer@12000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x12000 0x1000>; - interrupts = <3>; - clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; - - /* DVI I2C bus */ - v2m_i2c_dvi: i2c@16000 { - compatible = "arm,versatile-i2c"; - reg = <0x16000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - dvi-transmitter@39 { - compatible = "sil,sii9022-tpi", "sil,sii9022"; - reg = <0x39>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* - * Both the core tile and the motherboard routes their output - * pads to this transmitter. The motherboard system controller - * can select one of them as input using a mux register in - * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is - * the only platform with this specific set-up. - */ - port@0 { - reg = <0>; - dvi_bridge_in_ct: endpoint { - remote-endpoint = <&clcd_pads_ct>; - }; - }; - port@1 { - reg = <1>; - dvi_bridge_in_mb: endpoint { - remote-endpoint = <&clcd_pads_mb>; - }; - }; - }; - }; - - dvi-transmitter@60 { - compatible = "sil,sii9022-cpi", "sil,sii9022"; - reg = <0x60>; - }; - }; - - rtc@17000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x17000 0x1000>; - interrupts = <4>; - clocks = <&smbclk>; - clock-names = "apb_pclk"; - }; - - compact-flash@1a000 { - compatible = "arm,vexpress-cf", "ata-generic"; - reg = <0x1a000 0x100 - 0x1a100 0xf00>; - reg-shift = <2>; - }; - - - clcd@1f000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x1f000 0x1000>; - interrupt-names = "combined"; - interrupts = <14>; - clocks = <&v2m_oscclk1>, <&smbclk>; - clock-names = "clcdclk", "apb_pclk"; - /* 800x600 16bpp @36MHz works fine */ - max-memory-bandwidth = <54000000>; - memory-region = <&vram>; - - port { - clcd_pads_mb: endpoint { - remote-endpoint = <&dvi_bridge_in_mb>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; - }; - }; - }; - - v2m_fixed_3v3: fixed-regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - leds { - compatible = "gpio-leds"; - - user1 { - label = "v2m:green:user1"; - gpios = <&v2m_led_gpios 0 0>; - linux,default-trigger = "heartbeat"; - }; - - user2 { - label = "v2m:green:user2"; - gpios = <&v2m_led_gpios 1 0>; - linux,default-trigger = "mmc0"; - }; - - user3 { - label = "v2m:green:user3"; - gpios = <&v2m_led_gpios 2 0>; - linux,default-trigger = "cpu0"; - }; - - user4 { - label = "v2m:green:user4"; - gpios = <&v2m_led_gpios 3 0>; - linux,default-trigger = "cpu1"; - }; - - user5 { - label = "v2m:green:user5"; - gpios = <&v2m_led_gpios 4 0>; - linux,default-trigger = "cpu2"; - }; - - user6 { - label = "v2m:green:user6"; - gpios = <&v2m_led_gpios 5 0>; - linux,default-trigger = "cpu3"; - }; - - user7 { - label = "v2m:green:user7"; - gpios = <&v2m_led_gpios 6 0>; - linux,default-trigger = "cpu4"; - }; - - user8 { - label = "v2m:green:user8"; - gpios = <&v2m_led_gpios 7 0>; - linux,default-trigger = "cpu5"; - }; - }; - - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - oscclk0 { - /* MCC static memory clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <25000000 60000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk0"; - }; - - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 65000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; - - v2m_oscclk2: oscclk2 { - /* IO FPGA peripheral clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <24000000 24000000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk2"; - }; - - volt-vio { - /* Logic level voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "VIO"; - regulator-always-on; - label = "VIO"; - }; - - temp-mcc { - /* MCC internal operating temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "MCC"; - }; - - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; - - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; - - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; - - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; - - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; - }; - }; - }; - }; -}; \ No newline at end of file diff --git a/arch/arm/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/dts/vexpress-v2p-ca15_a7.dts deleted file mode 100644 index 00cd9f5..0000000 --- a/arch/arm/dts/vexpress-v2p-ca15_a7.dts +++ /dev/null @@ -1,682 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARM Ltd. Versatile Express - * - * CoreTile Express A15x2 A7x3 - * Cortex-A15_A7 MPCore (V2P-CA15_A7) - * - * HBI-0249A - */ - -/dts-v1/; -#include "vexpress-v2m-rs1.dtsi" - -/ { - model = "V2P-CA15_CA7"; - arm,hbi = <0x249>; - arm,vexpress,site = <0xf>; - compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - serial1 = &v2m_serial1; - serial2 = &v2m_serial2; - serial3 = &v2m_serial3; - i2c0 = &v2m_i2c_dvi; - i2c1 = &v2m_i2c_pcie; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - cci-control-port = <&cci_control1>; - cpu-idle-states = <&CLUSTER_SLEEP_BIG>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <990>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <1>; - cci-control-port = <&cci_control1>; - cpu-idle-states = <&CLUSTER_SLEEP_BIG>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <990>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x100>; - cci-control-port = <&cci_control2>; - cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; - capacity-dmips-mhz = <516>; - dynamic-power-coefficient = <133>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x101>; - cci-control-port = <&cci_control2>; - cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; - capacity-dmips-mhz = <516>; - dynamic-power-coefficient = <133>; - }; - - cpu4: cpu@4 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0x102>; - cci-control-port = <&cci_control2>; - cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; - capacity-dmips-mhz = <516>; - dynamic-power-coefficient = <133>; - }; - - idle-states { - CLUSTER_SLEEP_BIG: cluster-sleep-big { - compatible = "arm,idle-state"; - local-timer-stop; - entry-latency-us = <1000>; - exit-latency-us = <700>; - min-residency-us = <2000>; - }; - - CLUSTER_SLEEP_LITTLE: cluster-sleep-little { - compatible = "arm,idle-state"; - local-timer-stop; - entry-latency-us = <1000>; - exit-latency-us = <500>; - min-residency-us = <2500>; - }; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0 0x80000000 0 0x40000000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* Chipselect 2 is physically at 0x18000000 */ - vram: vram@18000000 { - /* 8 MB of designated video RAM */ - compatible = "shared-dma-pool"; - reg = <0 0x18000000 0 0x00800000>; - no-map; - }; - }; - - wdt@2a490000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0 0x2a490000 0 0x1000>; - interrupts = <0 98 4>; - clocks = <&oscclk6a>, <&oscclk6a>; - clock-names = "wdogclk", "apb_pclk"; - }; - - hdlcd@2b000000 { - compatible = "arm,hdlcd"; - reg = <0 0x2b000000 0 0x1000>; - interrupts = <0 85 4>; - clocks = <&hdlcd_clk>; - clock-names = "pxlclk"; - }; - - memory-controller@2b0a0000 { - compatible = "arm,pl341", "arm,primecell"; - reg = <0 0x2b0a0000 0 0x1000>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x2000>, - <0 0x2c004000 0 0x2000>, - <0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; - }; - - cci@2c090000 { - compatible = "arm,cci-400"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0 0x2c090000 0 0x1000>; - ranges = <0x0 0x0 0x2c090000 0x10000>; - - cci_control1: slave-if@4000 { - compatible = "arm,cci-400-ctrl-if"; - interface-type = "ace"; - reg = <0x4000 0x1000>; - }; - - cci_control2: slave-if@5000 { - compatible = "arm,cci-400-ctrl-if"; - interface-type = "ace"; - reg = <0x5000 0x1000>; - }; - - pmu@9000 { - compatible = "arm,cci-400-pmu,r0"; - reg = <0x9000 0x5000>; - interrupts = <0 105 4>, - <0 101 4>, - <0 102 4>, - <0 103 4>, - <0 104 4>; - }; - }; - - memory-controller@7ffd0000 { - compatible = "arm,pl354", "arm,primecell"; - reg = <0 0x7ffd0000 0 0x1000>; - interrupts = <0 86 4>, - <0 87 4>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - }; - - dma@7ff00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0 0x7ff00000 0 0x1000>; - interrupts = <0 92 4>, - <0 88 4>, - <0 89 4>, - <0 90 4>, - <0 91 4>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - }; - - scc@7fff0000 { - compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc"; - reg = <0 0x7fff0000 0 0x1000>; - interrupts = <0 95 4>; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - }; - - pmu-a15 { - compatible = "arm,cortex-a15-pmu"; - interrupts = <0 68 4>, - <0 69 4>; - interrupt-affinity = <&cpu0>, - <&cpu1>; - }; - - pmu-a7 { - compatible = "arm,cortex-a7-pmu"; - interrupts = <0 128 4>, - <0 129 4>, - <0 130 4>; - interrupt-affinity = <&cpu2>, - <&cpu3>, - <&cpu4>; - }; - - oscclk6a: oscclk6a { - /* Reference 24MHz clock */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "oscclk6a"; - }; - - dcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - oscclk0 { - /* A15 PLL 0 reference clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <17000000 50000000>; - #clock-cells = <0>; - clock-output-names = "oscclk0"; - }; - - oscclk1 { - /* A15 PLL 1 reference clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <17000000 50000000>; - #clock-cells = <0>; - clock-output-names = "oscclk1"; - }; - - oscclk2 { - /* A7 PLL 0 reference clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <17000000 50000000>; - #clock-cells = <0>; - clock-output-names = "oscclk2"; - }; - - oscclk3 { - /* A7 PLL 1 reference clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 3>; - freq-range = <17000000 50000000>; - #clock-cells = <0>; - clock-output-names = "oscclk3"; - }; - - oscclk4 { - /* External AXI master clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 4>; - freq-range = <20000000 40000000>; - #clock-cells = <0>; - clock-output-names = "oscclk4"; - }; - - hdlcd_clk: oscclk5 { - /* HDLCD PLL reference clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 5>; - freq-range = <23750000 165000000>; - #clock-cells = <0>; - clock-output-names = "oscclk5"; - }; - - smbclk: oscclk6 { - /* Static memory controller clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 6>; - freq-range = <20000000 40000000>; - #clock-cells = <0>; - clock-output-names = "oscclk6"; - }; - - oscclk7 { - /* SYS PLL reference clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 7>; - freq-range = <17000000 50000000>; - #clock-cells = <0>; - clock-output-names = "oscclk7"; - }; - - oscclk8 { - /* DDR2 PLL reference clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 8>; - freq-range = <20000000 50000000>; - #clock-cells = <0>; - clock-output-names = "oscclk8"; - }; - - volt-a15 { - /* A15 CPU core voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "A15 Vcore"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - label = "A15 Vcore"; - }; - - volt-a7 { - /* A7 CPU core voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 1>; - regulator-name = "A7 Vcore"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - label = "A7 Vcore"; - }; - - amp-a15 { - /* Total current for the two A15 cores */ - compatible = "arm,vexpress-amp"; - arm,vexpress-sysreg,func = <3 0>; - label = "A15 Icore"; - }; - - amp-a7 { - /* Total current for the three A7 cores */ - compatible = "arm,vexpress-amp"; - arm,vexpress-sysreg,func = <3 1>; - label = "A7 Icore"; - }; - - temp-dcc { - /* DCC internal temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "DCC"; - }; - - power-a15 { - /* Total power for the two A15 cores */ - compatible = "arm,vexpress-power"; - arm,vexpress-sysreg,func = <12 0>; - label = "A15 Pcore"; - }; - - power-a7 { - /* Total power for the three A7 cores */ - compatible = "arm,vexpress-power"; - arm,vexpress-sysreg,func = <12 1>; - label = "A7 Pcore"; - }; - - energy-a15 { - /* Total energy for the two A15 cores */ - compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 0>, <13 1>; - label = "A15 Jcore"; - }; - - energy-a7 { - /* Total energy for the three A7 cores */ - compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 2>, <13 3>; - label = "A7 Jcore"; - }; - }; - - etb@20010000 { - compatible = "arm,coresight-etb10", "arm,primecell"; - reg = <0 0x20010000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - in-ports { - port { - etb_in_port: endpoint { - remote-endpoint = <&replicator_out_port0>; - }; - }; - }; - }; - - tpiu@20030000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0 0x20030000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - in-ports { - port { - tpiu_in_port: endpoint { - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - }; - - replicator { - /* non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-replicator"; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&etb_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - }; - - in-ports { - port { - replicator_in_port0: endpoint { - remote-endpoint = <&funnel_out_port0>; - }; - }; - }; - }; - - funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; - reg = <0 0x20040000 0 0x1000>; - - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - funnel_out_port0: endpoint { - remote-endpoint = - <&replicator_in_port0>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - funnel_in_port0: endpoint { - remote-endpoint = <&ptm0_out_port>; - }; - }; - - port@1 { - reg = <1>; - funnel_in_port1: endpoint { - remote-endpoint = <&ptm1_out_port>; - }; - }; - - port@2 { - reg = <2>; - funnel_in_port2: endpoint { - remote-endpoint = <&etm0_out_port>; - }; - }; - - /* Input port #3 is for ITM, not supported here */ - - port@4 { - reg = <4>; - funnel_in_port4: endpoint { - remote-endpoint = <&etm1_out_port>; - }; - }; - - port@5 { - reg = <5>; - funnel_in_port5: endpoint { - remote-endpoint = <&etm2_out_port>; - }; - }; - }; - }; - - ptm@2201c000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2201c000 0 0x1000>; - - cpu = <&cpu0>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; - }; - }; - }; - }; - - ptm@2201d000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2201d000 0 0x1000>; - - cpu = <&cpu1>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; - }; - }; - }; - }; - - etm@2203c000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2203c000 0 0x1000>; - - cpu = <&cpu2>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - etm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port2>; - }; - }; - }; - }; - - etm@2203d000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2203d000 0 0x1000>; - - cpu = <&cpu3>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - etm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port4>; - }; - }; - }; - }; - - etm@2203e000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0 0x2203e000 0 0x1000>; - - cpu = <&cpu4>; - clocks = <&oscclk6a>; - clock-names = "apb_pclk"; - out-ports { - port { - etm2_out_port: endpoint { - remote-endpoint = <&funnel_in_port5>; - }; - }; - }; - }; - - smb: smb@8000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; - }; - - site2: hsb@40000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x40000000 0x3fef0000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 3>; - interrupt-map = <0 0 &gic 0 36 4>, - <0 1 &gic 0 37 4>, - <0 2 &gic 0 38 4>, - <0 3 &gic 0 39 4>; - }; -}; diff --git a/arch/arm/dts/vexpress-v2p-ca5s.dts b/arch/arm/dts/vexpress-v2p-ca5s.dts deleted file mode 100644 index d5b47d5..0000000 --- a/arch/arm/dts/vexpress-v2p-ca5s.dts +++ /dev/null @@ -1,280 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARM Ltd. Versatile Express - * - * CoreTile Express A5x2 - * Cortex-A5 MPCore (V2P-CA5s) - * - * HBI-0225B - */ - -/dts-v1/; -#include "vexpress-v2m-rs1.dtsi" - -/ { - model = "V2P-CA5s"; - arm,hbi = <0x225>; - arm,vexpress,site = <0xf>; - compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - serial1 = &v2m_serial1; - serial2 = &v2m_serial2; - serial3 = &v2m_serial3; - i2c0 = &v2m_i2c_dvi; - i2c1 = &v2m_i2c_pcie; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a5"; - reg = <0>; - next-level-cache = <&L2>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a5"; - reg = <1>; - next-level-cache = <&L2>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x40000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* Chipselect 2 is physically at 0x18000000 */ - vram: vram@18000000 { - /* 8 MB of designated video RAM */ - compatible = "shared-dma-pool"; - reg = <0x18000000 0x00800000>; - no-map; - }; - }; - - hdlcd@2a110000 { - compatible = "arm,hdlcd"; - reg = <0x2a110000 0x1000>; - interrupts = <0 85 4>; - clocks = <&hdlcd_clk>; - clock-names = "pxlclk"; - }; - - memory-controller@2a150000 { - compatible = "arm,pl341", "arm,primecell"; - reg = <0x2a150000 0x1000>; - clocks = <&axi_clk>; - clock-names = "apb_pclk"; - }; - - memory-controller@2a190000 { - compatible = "arm,pl354", "arm,primecell"; - reg = <0x2a190000 0x1000>; - interrupts = <0 86 4>, - <0 87 4>; - clocks = <&axi_clk>; - clock-names = "apb_pclk"; - }; - - scu@2c000000 { - compatible = "arm,cortex-a5-scu"; - reg = <0x2c000000 0x58>; - }; - - timer@2c000600 { - compatible = "arm,cortex-a5-twd-timer"; - reg = <0x2c000600 0x20>; - interrupts = <1 13 0x304>; - }; - - timer@2c000200 { - compatible = "arm,cortex-a5-global-timer", - "arm,cortex-a9-global-timer"; - reg = <0x2c000200 0x20>; - interrupts = <1 11 0x304>; - clocks = <&cpu_clk>; - }; - - watchdog@2c000620 { - compatible = "arm,cortex-a5-twd-wdt"; - reg = <0x2c000620 0x20>; - interrupts = <1 14 0x304>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c000100 0x100>; - }; - - L2: cache-controller@2c0f0000 { - compatible = "arm,pl310-cache"; - reg = <0x2c0f0000 0x1000>; - interrupts = <0 84 4>; - cache-level = <2>; - }; - - pmu { - compatible = "arm,cortex-a5-pmu"; - interrupts = <0 68 4>, - <0 69 4>; - }; - - dcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - cpu_clk: oscclk0 { - /* CPU and internal AXI reference clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <50000000 100000000>; - #clock-cells = <0>; - clock-output-names = "oscclk0"; - }; - - axi_clk: oscclk1 { - /* Multiplexed AXI master clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <5000000 50000000>; - #clock-cells = <0>; - clock-output-names = "oscclk1"; - }; - - oscclk2 { - /* DDR2 */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <80000000 120000000>; - #clock-cells = <0>; - clock-output-names = "oscclk2"; - }; - - hdlcd_clk: oscclk3 { - /* HDLCD */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 3>; - freq-range = <23750000 165000000>; - #clock-cells = <0>; - clock-output-names = "oscclk3"; - }; - - oscclk4 { - /* Test chip gate configuration */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 4>; - freq-range = <80000000 80000000>; - #clock-cells = <0>; - clock-output-names = "oscclk4"; - }; - - smbclk: oscclk5 { - /* SMB clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 5>; - freq-range = <25000000 60000000>; - #clock-cells = <0>; - clock-output-names = "oscclk5"; - }; - - temp-dcc { - /* DCC internal operating temperature */ - compatible = "arm,vexpress-temp"; - arm,vexpress-sysreg,func = <4 0>; - label = "DCC"; - }; - }; - - smb: smb@8000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x08000000 0x04000000>, - <1 0 0x14000000 0x04000000>, - <2 0 0x18000000 0x04000000>, - <3 0 0x1c000000 0x04000000>, - <4 0 0x0c000000 0x04000000>, - <5 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; - }; - - site2: hsb@40000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x40000000 0x40000000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 3>; - interrupt-map = <0 0 &gic 0 36 4>, - <0 1 &gic 0 37 4>, - <0 2 &gic 0 38 4>, - <0 3 &gic 0 39 4>; - }; -}; diff --git a/arch/arm/dts/vexpress-v2p-ca9.dts b/arch/arm/dts/vexpress-v2p-ca9.dts deleted file mode 100644 index d796efa..0000000 --- a/arch/arm/dts/vexpress-v2p-ca9.dts +++ /dev/null @@ -1,368 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ARM Ltd. Versatile Express - * - * CoreTile Express A9x4 - * Cortex-A9 MPCore (V2P-CA9) - * - * HBI-0191B - */ - -/dts-v1/; -#include "vexpress-v2m.dtsi" - -/ { - model = "V2P-CA9"; - arm,hbi = <0x191>; - arm,vexpress,site = <0xf>; - compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - serial1 = &v2m_serial1; - serial2 = &v2m_serial2; - serial3 = &v2m_serial3; - i2c0 = &v2m_i2c_dvi; - i2c1 = &v2m_i2c_pcie; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - A9_0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - }; - - A9_1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - next-level-cache = <&L2>; - }; - - A9_2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <2>; - next-level-cache = <&L2>; - }; - - A9_3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <3>; - next-level-cache = <&L2>; - }; - }; - - memory@60000000 { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* Chipselect 3 is physically at 0x4c000000 */ - vram: vram@4c000000 { - /* 8 MB of designated video RAM */ - compatible = "shared-dma-pool"; - reg = <0x4c000000 0x00800000>; - no-map; - }; - }; - - clcd@10020000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x10020000 0x1000>; - interrupt-names = "combined"; - interrupts = <0 44 4>; - clocks = <&oscclk1>, <&oscclk2>; - clock-names = "clcdclk", "apb_pclk"; - /* 1024x768 16bpp @65MHz */ - max-memory-bandwidth = <95000000>; - - port { - clcd_pads_ct: endpoint { - remote-endpoint = <&dvi_bridge_in_ct>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; - }; - }; - - memory-controller@100e0000 { - compatible = "arm,pl341", "arm,primecell"; - reg = <0x100e0000 0x1000>; - clocks = <&oscclk2>; - clock-names = "apb_pclk"; - }; - - memory-controller@100e1000 { - compatible = "arm,pl354", "arm,primecell"; - reg = <0x100e1000 0x1000>; - interrupts = <0 45 4>, - <0 46 4>; - clocks = <&oscclk2>; - clock-names = "apb_pclk"; - }; - - timer@100e4000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x100e4000 0x1000>; - interrupts = <0 48 4>, - <0 49 4>; - clocks = <&oscclk2>, <&oscclk2>; - clock-names = "timclk", "apb_pclk"; - status = "disabled"; - }; - - watchdog@100e5000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x100e5000 0x1000>; - interrupts = <0 51 4>; - clocks = <&oscclk2>, <&oscclk2>; - clock-names = "wdogclk", "apb_pclk"; - }; - - scu@1e000000 { - compatible = "arm,cortex-a9-scu"; - reg = <0x1e000000 0x58>; - }; - - timer@1e000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x1e000600 0x20>; - interrupts = <1 13 0xf04>; - }; - - watchdog@1e000620 { - compatible = "arm,cortex-a9-twd-wdt"; - reg = <0x1e000620 0x20>; - interrupts = <1 14 0xf04>; - }; - - gic: interrupt-controller@1e001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1e001000 0x1000>, - <0x1e000100 0x100>; - }; - - L2: cache-controller@1e00a000 { - compatible = "arm,pl310-cache"; - reg = <0x1e00a000 0x1000>; - interrupts = <0 43 4>; - cache-unified; - cache-level = <2>; - arm,data-latency = <1 1 1>; - arm,tag-latency = <1 1 1>; - }; - - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; - interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>; - - }; - - dcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - oscclk0: extsaxiclk { - /* ACLK clock to the AXI master port on the test chip */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 0>; - freq-range = <30000000 50000000>; - #clock-cells = <0>; - clock-output-names = "extsaxiclk"; - }; - - oscclk1: clcdclk { - /* Reference clock for the CLCD */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <10000000 80000000>; - #clock-cells = <0>; - clock-output-names = "clcdclk"; - }; - - smbclk: oscclk2: tcrefclk { - /* Reference clock for the test chip internal PLLs */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 2>; - freq-range = <33000000 100000000>; - #clock-cells = <0>; - clock-output-names = "tcrefclk"; - }; - - volt-vd10 { - /* Test Chip internal logic voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 0>; - regulator-name = "VD10"; - regulator-always-on; - label = "VD10"; - }; - - volt-vd10-s2 { - /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 1>; - regulator-name = "VD10_S2"; - regulator-always-on; - label = "VD10_S2"; - }; - - volt-vd10-s3 { - /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 2>; - regulator-name = "VD10_S3"; - regulator-always-on; - label = "VD10_S3"; - }; - - volt-vcc1v8 { - /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 3>; - regulator-name = "VCC1V8"; - regulator-always-on; - label = "VCC1V8"; - }; - - volt-ddr2vtt { - /* DDR2 SDRAM VTT termination voltage */ - compatible = "arm,vexpress-volt"; - arm,vexpress-sysreg,func = <2 4>; - regulator-name = "DDR2VTT"; - regulator-always-on; - label = "DDR2VTT"; - }; - - volt-vcc3v3 { - /* Local board supply for miscellaneous logic external to the Test Chip */ - arm,vexpress-sysreg,func = <2 5>; - compatible = "arm,vexpress-volt"; - regulator-name = "VCC3V3"; - regulator-always-on; - label = "VCC3V3"; - }; - - amp-vd10-s2 { - /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ - compatible = "arm,vexpress-amp"; - arm,vexpress-sysreg,func = <3 0>; - label = "VD10_S2"; - }; - - amp-vd10-s3 { - /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ - compatible = "arm,vexpress-amp"; - arm,vexpress-sysreg,func = <3 1>; - label = "VD10_S3"; - }; - - power-vd10-s2 { - /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ - compatible = "arm,vexpress-power"; - arm,vexpress-sysreg,func = <12 0>; - label = "PVD10_S2"; - }; - - power-vd10-s3 { - /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ - compatible = "arm,vexpress-power"; - arm,vexpress-sysreg,func = <12 1>; - label = "PVD10_S3"; - }; - }; - - smb: smb@4000000 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x40000000 0x04000000>, - <1 0 0x44000000 0x04000000>, - <2 0 0x48000000 0x04000000>, - <3 0 0x4c000000 0x04000000>, - <7 0 0x10000000 0x00020000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; - }; - - site2: hsb@e0000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xe0000000 0x20000000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 3>; - interrupt-map = <0 0 &gic 0 36 4>, - <0 1 &gic 0 37 4>, - <0 2 &gic 0 38 4>, - <0 3 &gic 0 39 4>; - }; -}; -- cgit v1.1 From 56124508cec17cb493ef82d3ad5545077361f38a Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:48 -0500 Subject: arm: Remove secomx6quq7 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Boris Brezillon Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index e5e1ce3..cd71560 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -540,9 +540,6 @@ config TARGET_PCL063_ULL select DM_THERMAL select SUPPORT_SPL -config TARGET_SECOMX6 - bool "secomx6 boards" - config TARGET_SOMLABS_VISIONSOM_6ULL bool "visionsom-6ull" depends on MX6ULL @@ -718,7 +715,6 @@ source "board/softing/vining_2000/Kconfig" source "board/liebherr/display5/Kconfig" source "board/liebherr/mccmon6/Kconfig" source "board/logicpd/imx6/Kconfig" -source "board/seco/Kconfig" source "board/solidrun/mx6cuboxi/Kconfig" source "board/somlabs/visionsom-6ull/Kconfig" source "board/technexion/pico-imx6/Kconfig" -- cgit v1.1 From 9ac8368071c257394283c65fe3cf4d0feea3306a Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:49 -0500 Subject: arm: Remove s32v234evb board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Eddy Petrișor Signed-off-by: Tom Rini --- arch/arm/Kconfig | 6 - arch/arm/cpu/armv8/Kconfig | 2 +- arch/arm/cpu/armv8/s32v234/Makefile | 6 - arch/arm/cpu/armv8/s32v234/cpu.c | 102 ------- arch/arm/cpu/armv8/s32v234/cpu.h | 7 - arch/arm/cpu/armv8/s32v234/generic.c | 354 ------------------------ arch/arm/include/asm/arch-s32v234/clock.h | 31 --- arch/arm/include/asm/arch-s32v234/ddr.h | 156 ----------- arch/arm/include/asm/arch-s32v234/imx-regs.h | 328 ---------------------- arch/arm/include/asm/arch-s32v234/lpddr2.h | 74 ----- arch/arm/include/asm/arch-s32v234/mc_cgm_regs.h | 253 ----------------- arch/arm/include/asm/arch-s32v234/mc_me_regs.h | 198 ------------- arch/arm/include/asm/arch-s32v234/mc_rgm_regs.h | 30 -- arch/arm/include/asm/arch-s32v234/mmdc.h | 88 ------ arch/arm/include/asm/arch-s32v234/siul.h | 149 ---------- 15 files changed, 1 insertion(+), 1783 deletions(-) delete mode 100644 arch/arm/cpu/armv8/s32v234/Makefile delete mode 100644 arch/arm/cpu/armv8/s32v234/cpu.c delete mode 100644 arch/arm/cpu/armv8/s32v234/cpu.h delete mode 100644 arch/arm/cpu/armv8/s32v234/generic.c delete mode 100644 arch/arm/include/asm/arch-s32v234/clock.h delete mode 100644 arch/arm/include/asm/arch-s32v234/ddr.h delete mode 100644 arch/arm/include/asm/arch-s32v234/imx-regs.h delete mode 100644 arch/arm/include/asm/arch-s32v234/lpddr2.h delete mode 100644 arch/arm/include/asm/arch-s32v234/mc_cgm_regs.h delete mode 100644 arch/arm/include/asm/arch-s32v234/mc_me_regs.h delete mode 100644 arch/arm/include/asm/arch-s32v234/mc_rgm_regs.h delete mode 100644 arch/arm/include/asm/arch-s32v234/mmdc.h delete mode 100644 arch/arm/include/asm/arch-s32v234/siul.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 962331c..8d5332a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -932,11 +932,6 @@ config ARCH_RMOBILE imply SYS_THUMB_BUILD imply ARCH_MISC_INIT if DISPLAY_CPUINFO -config TARGET_S32V234EVB - bool "Support s32v234evb" - select ARM64 - select SYS_FSL_ERRATUM_ESDHC111 - config ARCH_SNAPDRAGON bool "Qualcomm Snapdragon SoCs" select ARM64 @@ -1979,7 +1974,6 @@ source "board/freescale/ls1012aqds/Kconfig" source "board/freescale/ls1012ardb/Kconfig" source "board/freescale/ls1012afrdm/Kconfig" source "board/freescale/lx2160a/Kconfig" -source "board/freescale/s32v234evb/Kconfig" source "board/grinn/chiliboard/Kconfig" source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/hikey960/Kconfig" diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 9cd6a8d..b7a10a8 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -116,7 +116,7 @@ config PSCI_RESET !TARGET_LS1046AFRWY && \ !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \ !TARGET_LX2160AQDS && !TARGET_LX2162AQDS && \ - !ARCH_UNIPHIER && !TARGET_S32V234EVB + !ARCH_UNIPHIER help Most armv8 systems have PSCI support enabled in EL3, either through ARM Trusted Firmware or other firmware. diff --git a/arch/arm/cpu/armv8/s32v234/Makefile b/arch/arm/cpu/armv8/s32v234/Makefile deleted file mode 100644 index 3bdb98d..0000000 --- a/arch/arm/cpu/armv8/s32v234/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2013-2016, Freescale Semiconductor, Inc. - -obj-y += generic.o -obj-y += cpu.o diff --git a/arch/arm/cpu/armv8/s32v234/cpu.c b/arch/arm/cpu/armv8/s32v234/cpu.c deleted file mode 100644 index 8ee3adc..0000000 --- a/arch/arm/cpu/armv8/s32v234/cpu.c +++ /dev/null @@ -1,102 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2014-2016, Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "cpu.h" - -u32 cpu_mask(void) -{ - return readl(MC_ME_CS); -} - -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) - -#define S32V234_IRAM_BASE 0x3e800000UL -#define S32V234_IRAM_SIZE 0x800000UL -#define S32V234_DRAM_BASE1 0x80000000UL -#define S32V234_DRAM_SIZE1 0x40000000UL -#define S32V234_DRAM_BASE2 0xC0000000UL -#define S32V234_DRAM_SIZE2 0x20000000UL -#define S32V234_PERIPH_BASE 0x40000000UL -#define S32V234_PERIPH_SIZE 0x40000000UL - -static struct mm_region s32v234_mem_map[] = { - { - .virt = S32V234_IRAM_BASE, - .phys = S32V234_IRAM_BASE, - .size = S32V234_IRAM_SIZE, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_OUTER_SHARE - }, { - .virt = S32V234_DRAM_BASE1, - .phys = S32V234_DRAM_BASE1, - .size = S32V234_DRAM_SIZE1, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_OUTER_SHARE - }, { - .virt = S32V234_PERIPH_BASE, - .phys = S32V234_PERIPH_BASE, - .size = S32V234_PERIPH_SIZE, - .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | - PTE_BLOCK_NON_SHARE - /* TODO: Do we need these? */ - /* | PTE_BLOCK_PXN | PTE_BLOCK_UXN */ - }, { - .virt = S32V234_DRAM_BASE2, - .phys = S32V234_DRAM_BASE2, - .size = S32V234_DRAM_SIZE2, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) | - PTE_BLOCK_OUTER_SHARE - }, { - /* List terminator */ - 0, - } -}; - -struct mm_region *mem_map = s32v234_mem_map; - -#endif - -/* - * Return the number of cores on this SOC. - */ -int cpu_numcores(void) -{ - int numcores; - u32 mask; - - mask = cpu_mask(); - numcores = hweight32(cpu_mask()); - - /* Verify if M4 is deactivated */ - if (mask & 0x1) - numcores--; - - return numcores; -} - -#if defined(CONFIG_ARCH_EARLY_INIT_R) -int arch_early_init_r(void) -{ - int rv; - asm volatile ("dsb sy"); - rv = fsl_s32v234_wake_seconday_cores(); - - if (rv) - printf("Did not wake secondary cores\n"); - - asm volatile ("sev"); - return 0; -} -#endif /* CONFIG_ARCH_EARLY_INIT_R */ diff --git a/arch/arm/cpu/armv8/s32v234/cpu.h b/arch/arm/cpu/armv8/s32v234/cpu.h deleted file mode 100644 index 11c3a6b..0000000 --- a/arch/arm/cpu/armv8/s32v234/cpu.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2014-2016, Freescale Semiconductor, Inc. - */ - -u32 cpu_mask(void); -int cpu_numcores(void); diff --git a/arch/arm/cpu/armv8/s32v234/generic.c b/arch/arm/cpu/armv8/s32v234/generic.c deleted file mode 100644 index d1ae10b..0000000 --- a/arch/arm/cpu/armv8/s32v234/generic.c +++ /dev/null @@ -1,354 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2013-2016, Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -u32 get_cpu_rev(void) -{ - struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_BASE_ADDR; - u32 cpu = readl(&mscmir->cpxtype); - - return cpu; -} - -DECLARE_GLOBAL_DATA_PTR; - -static uintptr_t get_pllfreq(u32 pll, u32 refclk_freq, u32 plldv, - u32 pllfd, u32 selected_output) -{ - u32 vco = 0, plldv_prediv = 0, plldv_mfd = 0, pllfd_mfn = 0; - u32 plldv_rfdphi_div = 0, fout = 0; - u32 dfs_portn = 0, dfs_mfn = 0, dfs_mfi = 0; - - if (selected_output > DFS_MAXNUMBER) { - return -1; - } - - plldv_prediv = - (plldv & PLLDIG_PLLDV_PREDIV_MASK) >> PLLDIG_PLLDV_PREDIV_OFFSET; - plldv_mfd = (plldv & PLLDIG_PLLDV_MFD_MASK); - - pllfd_mfn = (pllfd & PLLDIG_PLLFD_MFN_MASK); - - plldv_prediv = plldv_prediv == 0 ? 1 : plldv_prediv; - - /* The formula for VCO is from TR manual, rev. D */ - vco = refclk_freq / plldv_prediv * (plldv_mfd + pllfd_mfn / 20481); - - if (selected_output != 0) { - /* Determine the RFDPHI for PHI1 */ - plldv_rfdphi_div = - (plldv & PLLDIG_PLLDV_RFDPHI1_MASK) >> - PLLDIG_PLLDV_RFDPHI1_OFFSET; - plldv_rfdphi_div = plldv_rfdphi_div == 0 ? 1 : plldv_rfdphi_div; - if (pll == ARM_PLL || pll == ENET_PLL || pll == DDR_PLL) { - dfs_portn = - readl(DFS_DVPORTn(pll, selected_output - 1)); - dfs_mfi = - (dfs_portn & DFS_DVPORTn_MFI_MASK) >> - DFS_DVPORTn_MFI_OFFSET; - dfs_mfn = - (dfs_portn & DFS_DVPORTn_MFI_MASK) >> - DFS_DVPORTn_MFI_OFFSET; - fout = vco / (dfs_mfi + (dfs_mfn / 256)); - } else { - fout = vco / plldv_rfdphi_div; - } - - } else { - /* Determine the RFDPHI for PHI0 */ - plldv_rfdphi_div = - (plldv & PLLDIG_PLLDV_RFDPHI_MASK) >> - PLLDIG_PLLDV_RFDPHI_OFFSET; - fout = vco / plldv_rfdphi_div; - } - - return fout; - -} - -/* Implemented for ARMPLL, PERIPH_PLL, ENET_PLL, DDR_PLL, VIDEO_LL */ -static uintptr_t decode_pll(enum pll_type pll, u32 refclk_freq, - u32 selected_output) -{ - u32 plldv, pllfd; - - plldv = readl(PLLDIG_PLLDV(pll)); - pllfd = readl(PLLDIG_PLLFD(pll)); - - return get_pllfreq(pll, refclk_freq, plldv, pllfd, selected_output); -} - -static u32 get_mcu_main_clk(void) -{ - u32 coreclk_div; - u32 sysclk_sel; - u32 freq = 0; - - sysclk_sel = readl(CGM_SC_SS(MC_CGM1_BASE_ADDR)) & MC_CGM_SC_SEL_MASK; - sysclk_sel >>= MC_CGM_SC_SEL_OFFSET; - - coreclk_div = - readl(CGM_SC_DCn(MC_CGM1_BASE_ADDR, 0)) & MC_CGM_SC_DCn_PREDIV_MASK; - coreclk_div >>= MC_CGM_SC_DCn_PREDIV_OFFSET; - coreclk_div += 1; - - switch (sysclk_sel) { - case MC_CGM_SC_SEL_FIRC: - freq = FIRC_CLK_FREQ; - break; - case MC_CGM_SC_SEL_XOSC: - freq = XOSC_CLK_FREQ; - break; - case MC_CGM_SC_SEL_ARMPLL: - /* ARMPLL has as source XOSC and CORE_CLK has as input PHI0 */ - freq = decode_pll(ARM_PLL, XOSC_CLK_FREQ, 0); - break; - case MC_CGM_SC_SEL_CLKDISABLE: - printf("Sysclk is disabled\n"); - break; - default: - printf("unsupported system clock select\n"); - } - - return freq / coreclk_div; -} - -static u32 get_sys_clk(u32 number) -{ - u32 sysclk_div, sysclk_div_number; - u32 sysclk_sel; - u32 freq = 0; - - switch (number) { - case 3: - sysclk_div_number = 0; - break; - case 6: - sysclk_div_number = 1; - break; - default: - printf("unsupported system clock \n"); - return -1; - } - sysclk_sel = readl(CGM_SC_SS(MC_CGM0_BASE_ADDR)) & MC_CGM_SC_SEL_MASK; - sysclk_sel >>= MC_CGM_SC_SEL_OFFSET; - - sysclk_div = - readl(CGM_SC_DCn(MC_CGM1_BASE_ADDR, sysclk_div_number)) & - MC_CGM_SC_DCn_PREDIV_MASK; - sysclk_div >>= MC_CGM_SC_DCn_PREDIV_OFFSET; - sysclk_div += 1; - - switch (sysclk_sel) { - case MC_CGM_SC_SEL_FIRC: - freq = FIRC_CLK_FREQ; - break; - case MC_CGM_SC_SEL_XOSC: - freq = XOSC_CLK_FREQ; - break; - case MC_CGM_SC_SEL_ARMPLL: - /* ARMPLL has as source XOSC and SYSn_CLK has as input DFS1 */ - freq = decode_pll(ARM_PLL, XOSC_CLK_FREQ, 1); - break; - case MC_CGM_SC_SEL_CLKDISABLE: - printf("Sysclk is disabled\n"); - break; - default: - printf("unsupported system clock select\n"); - } - - return freq / sysclk_div; -} - -static u32 get_peripherals_clk(void) -{ - u32 aux5clk_div; - u32 freq = 0; - - aux5clk_div = - readl(CGM_ACn_DCm(MC_CGM0_BASE_ADDR, 5, 0)) & - MC_CGM_ACn_DCm_PREDIV_MASK; - aux5clk_div >>= MC_CGM_ACn_DCm_PREDIV_OFFSET; - aux5clk_div += 1; - - freq = decode_pll(PERIPH_PLL, XOSC_CLK_FREQ, 0); - - return freq / aux5clk_div; - -} - -static u32 get_uart_clk(void) -{ - u32 auxclk3_div, auxclk3_sel, freq = 0; - - auxclk3_sel = - readl(CGM_ACn_SS(MC_CGM0_BASE_ADDR, 3)) & MC_CGM_ACn_SEL_MASK; - auxclk3_sel >>= MC_CGM_ACn_SEL_OFFSET; - - auxclk3_div = - readl(CGM_ACn_DCm(MC_CGM0_BASE_ADDR, 3, 0)) & - MC_CGM_ACn_DCm_PREDIV_MASK; - auxclk3_div >>= MC_CGM_ACn_DCm_PREDIV_OFFSET; - auxclk3_div += 1; - - switch (auxclk3_sel) { - case MC_CGM_ACn_SEL_FIRC: - freq = FIRC_CLK_FREQ; - break; - case MC_CGM_ACn_SEL_XOSC: - freq = XOSC_CLK_FREQ; - break; - case MC_CGM_ACn_SEL_PERPLLDIVX: - freq = get_peripherals_clk() / 3; - break; - case MC_CGM_ACn_SEL_SYSCLK: - freq = get_sys_clk(6); - break; - default: - printf("unsupported system clock select\n"); - } - - return freq / auxclk3_div; -} - -static u32 get_fec_clk(void) -{ - u32 aux2clk_div; - u32 freq = 0; - - aux2clk_div = - readl(CGM_ACn_DCm(MC_CGM0_BASE_ADDR, 2, 0)) & - MC_CGM_ACn_DCm_PREDIV_MASK; - aux2clk_div >>= MC_CGM_ACn_DCm_PREDIV_OFFSET; - aux2clk_div += 1; - - freq = decode_pll(ENET_PLL, XOSC_CLK_FREQ, 0); - - return freq / aux2clk_div; -} - -static u32 get_usdhc_clk(void) -{ - u32 aux15clk_div; - u32 freq = 0; - - aux15clk_div = - readl(CGM_ACn_DCm(MC_CGM0_BASE_ADDR, 15, 0)) & - MC_CGM_ACn_DCm_PREDIV_MASK; - aux15clk_div >>= MC_CGM_ACn_DCm_PREDIV_OFFSET; - aux15clk_div += 1; - - freq = decode_pll(ENET_PLL, XOSC_CLK_FREQ, 4); - - return freq / aux15clk_div; -} - -static u32 get_i2c_clk(void) -{ - return get_peripherals_clk(); -} - -/* return clocks in Hz */ -unsigned int mxc_get_clock(enum mxc_clock clk) -{ - switch (clk) { - case MXC_ARM_CLK: - return get_mcu_main_clk(); - case MXC_PERIPHERALS_CLK: - return get_peripherals_clk(); - case MXC_UART_CLK: - return get_uart_clk(); - case MXC_FEC_CLK: - return get_fec_clk(); - case MXC_I2C_CLK: - return get_i2c_clk(); - case MXC_USDHC_CLK: - return get_usdhc_clk(); - default: - break; - } - printf("Error: Unsupported function to read the frequency! \ - Please define it correctly!"); - return -1; -} - -/* Not yet implemented - int soc_clk_dump(); */ - -#if defined(CONFIG_DISPLAY_CPUINFO) -static char *get_reset_cause(void) -{ - u32 cause = readl(MC_RGM_BASE_ADDR + 0x300); - - switch (cause) { - case F_SWT4: - return "WDOG"; - case F_JTAG: - return "JTAG"; - case F_FCCU_SOFT: - return "FCCU soft reaction"; - case F_FCCU_HARD: - return "FCCU hard reaction"; - case F_SOFT_FUNC: - return "Software Functional reset"; - case F_ST_DONE: - return "Self Test done reset"; - case F_EXT_RST: - return "External reset"; - default: - return "unknown reset"; - } - -} - -#define SRC_SCR_SW_RST (1<<12) - -void reset_cpu(void) -{ - printf("Feature not supported.\n"); -}; - -int print_cpuinfo(void) -{ - printf("CPU: Freescale Treerunner S32V234 at %d MHz\n", - mxc_get_clock(MXC_ARM_CLK) / 1000000); - printf("Reset cause: %s\n", get_reset_cause()); - - return 0; -} -#endif - -int cpu_eth_init(struct bd_info * bis) -{ - int rc = -ENODEV; - -#if defined(CONFIG_FEC_MXC) - rc = fecmxc_initialize(bis); -#endif - - return rc; -} - -int get_clocks(void) -{ -#ifdef CONFIG_FSL_ESDHC_IMX - gd->arch.sdhc_clk = mxc_get_clock(MXC_USDHC_CLK); -#endif - return 0; -} diff --git a/arch/arm/include/asm/arch-s32v234/clock.h b/arch/arm/include/asm/arch-s32v234/clock.h deleted file mode 100644 index 7084609..0000000 --- a/arch/arm/include/asm/arch-s32v234/clock.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015-2016, Freescale Semiconductor, Inc. - */ - -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H - -enum mxc_clock { - MXC_ARM_CLK = 0, - MXC_BUS_CLK, - MXC_PERIPHERALS_CLK, - MXC_UART_CLK, - MXC_USDHC_CLK, - MXC_FEC_CLK, - MXC_I2C_CLK, -}; -enum pll_type { - ARM_PLL = 0, - PERIPH_PLL, - ENET_PLL, - DDR_PLL, - VIDEO_PLL, -}; - -unsigned int mxc_get_clock(enum mxc_clock clk); -void clock_init(void); - -#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK) - -#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-s32v234/ddr.h b/arch/arm/include/asm/arch-s32v234/ddr.h deleted file mode 100644 index 8c709af..0000000 --- a/arch/arm/include/asm/arch-s32v234/ddr.h +++ /dev/null @@ -1,156 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015-2016, Freescale Semiconductor, Inc. - */ - -#ifndef __ARCH_ARM_MACH_S32V234_DDR_H__ -#define __ARCH_ARM_MACH_S32V234_DDR_H__ - -#define DDR0 0 -#define DDR1 1 - -/* DDR offset in MSCR register */ -#define _DDR0_RESET 168 -#define _DDR0_CLK0 169 -#define _DDR0_CAS 170 -#define _DDR0_RAS 171 -#define _DDR0_WE_B 172 -#define _DDR0_CKE0 173 -#define _DDR0_CKE1 174 -#define _DDR0_CS_B0 175 -#define _DDR0_CS_B1 176 -#define _DDR0_BA0 177 -#define _DDR0_BA1 178 -#define _DDR0_BA2 179 -#define _DDR0_A0 180 -#define _DDR0_A1 181 -#define _DDR0_A2 182 -#define _DDR0_A3 183 -#define _DDR0_A4 184 -#define _DDR0_A5 185 -#define _DDR0_A6 186 -#define _DDR0_A7 187 -#define _DDR0_A8 188 -#define _DDR0_A9 189 -#define _DDR0_A10 190 -#define _DDR0_A11 191 -#define _DDR0_A12 192 -#define _DDR0_A13 193 -#define _DDR0_A14 194 -#define _DDR0_A15 195 -#define _DDR0_DM0 196 -#define _DDR0_DM1 197 -#define _DDR0_DM2 198 -#define _DDR0_DM3 199 -#define _DDR0_DQS0 200 -#define _DDR0_DQS1 201 -#define _DDR0_DQS2 202 -#define _DDR0_DQS3 203 -#define _DDR0_D0 204 -#define _DDR0_D1 205 -#define _DDR0_D2 206 -#define _DDR0_D3 207 -#define _DDR0_D4 208 -#define _DDR0_D5 209 -#define _DDR0_D6 210 -#define _DDR0_D7 211 -#define _DDR0_D8 212 -#define _DDR0_D9 213 -#define _DDR0_D10 214 -#define _DDR0_D11 215 -#define _DDR0_D12 216 -#define _DDR0_D13 217 -#define _DDR0_D14 218 -#define _DDR0_D15 219 -#define _DDR0_D16 220 -#define _DDR0_D17 221 -#define _DDR0_D18 222 -#define _DDR0_D19 223 -#define _DDR0_D20 224 -#define _DDR0_D21 225 -#define _DDR0_D22 226 -#define _DDR0_D23 227 -#define _DDR0_D24 228 -#define _DDR0_D25 229 -#define _DDR0_D26 230 -#define _DDR0_D27 231 -#define _DDR0_D28 232 -#define _DDR0_D29 233 -#define _DDR0_D30 234 -#define _DDR0_D31 235 -#define _DDR0_ODT0 236 -#define _DDR0_ODT1 237 -#define _DDR0_ZQ 238 -#define _DDR1_RESET 239 -#define _DDR1_CLK0 240 -#define _DDR1_CAS 241 -#define _DDR1_RAS 242 -#define _DDR1_WE_B 243 -#define _DDR1_CKE0 244 -#define _DDR1_CKE1 245 -#define _DDR1_CS_B0 246 -#define _DDR1_CS_B1 247 -#define _DDR1_BA0 248 -#define _DDR1_BA1 249 -#define _DDR1_BA2 250 -#define _DDR1_A0 251 -#define _DDR1_A1 252 -#define _DDR1_A2 253 -#define _DDR1_A3 254 -#define _DDR1_A4 255 -#define _DDR1_A5 256 -#define _DDR1_A6 257 -#define _DDR1_A7 258 -#define _DDR1_A8 259 -#define _DDR1_A9 260 -#define _DDR1_A10 261 -#define _DDR1_A11 262 -#define _DDR1_A12 263 -#define _DDR1_A13 264 -#define _DDR1_A14 265 -#define _DDR1_A15 266 -#define _DDR1_DM0 267 -#define _DDR1_DM1 268 -#define _DDR1_DM2 269 -#define _DDR1_DM3 270 -#define _DDR1_DQS0 271 -#define _DDR1_DQS1 272 -#define _DDR1_DQS2 273 -#define _DDR1_DQS3 274 -#define _DDR1_D0 275 -#define _DDR1_D1 276 -#define _DDR1_D2 277 -#define _DDR1_D3 278 -#define _DDR1_D4 279 -#define _DDR1_D5 280 -#define _DDR1_D6 281 -#define _DDR1_D7 282 -#define _DDR1_D8 283 -#define _DDR1_D9 284 -#define _DDR1_D10 285 -#define _DDR1_D11 286 -#define _DDR1_D12 287 -#define _DDR1_D13 288 -#define _DDR1_D14 289 -#define _DDR1_D15 290 -#define _DDR1_D16 291 -#define _DDR1_D17 292 -#define _DDR1_D18 293 -#define _DDR1_D19 294 -#define _DDR1_D20 295 -#define _DDR1_D21 296 -#define _DDR1_D22 297 -#define _DDR1_D23 298 -#define _DDR1_D24 299 -#define _DDR1_D25 300 -#define _DDR1_D26 301 -#define _DDR1_D27 302 -#define _DDR1_D28 303 -#define _DDR1_D29 304 -#define _DDR1_D30 305 -#define _DDR1_D31 306 -#define _DDR1_ODT0 307 -#define _DDR1_ODT1 308 -#define _DDR1_ZQ 309 - -#endif diff --git a/arch/arm/include/asm/arch-s32v234/imx-regs.h b/arch/arm/include/asm/arch-s32v234/imx-regs.h deleted file mode 100644 index 1472a43..0000000 --- a/arch/arm/include/asm/arch-s32v234/imx-regs.h +++ /dev/null @@ -1,328 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2013-2016, Freescale Semiconductor, Inc. - */ - -#ifndef __ASM_ARCH_IMX_REGS_H__ -#define __ASM_ARCH_IMX_REGS_H__ - -#define ARCH_MXC - -#define IRAM_BASE_ADDR 0x3E800000 /* internal ram */ -#define IRAM_SIZE 0x00400000 /* 4MB */ - -#define AIPS0_BASE_ADDR (0x40000000UL) -#define AIPS1_BASE_ADDR (0x40080000UL) - -/* AIPS 0 */ -#define AXBS_BASE_ADDR (AIPS0_BASE_ADDR + 0x00000000) -#define CSE3_BASE_ADDR (AIPS0_BASE_ADDR + 0x00001000) -#define EDMA_BASE_ADDR (AIPS0_BASE_ADDR + 0x00002000) -#define XRDC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00004000) -#define SWT0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000A000) -#define SWT1_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000B000) -#define STM0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000D000) -#define NIC301_BASE_ADDR (AIPS0_BASE_ADDR + 0x00010000) -#define GC3000_BASE_ADDR (AIPS0_BASE_ADDR + 0x00020000) -#define DEC200_DECODER_BASE_ADDR (AIPS0_BASE_ADDR + 0x00026000) -#define DEC200_ENCODER_BASE_ADDR (AIPS0_BASE_ADDR + 0x00027000) -#define TWOD_ACE_BASE_ADDR (AIPS0_BASE_ADDR + 0x00028000) -#define MIPI_CSI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00030000) -#define DMAMUX0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00031000) -#define ENET_BASE_ADDR (AIPS0_BASE_ADDR + 0x00032000) -#define FLEXRAY_BASE_ADDR (AIPS0_BASE_ADDR + 0x00034000) -#define MMDC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00036000) -#define MEW0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00037000) -#define MONITOR_DDR0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00038000) -#define MONITOR_CCI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00039000) -#define PIT0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003A000) -#define MC_CGM0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003C000) -#define MC_CGM1_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003F000) -#define MC_CGM2_BASE_ADDR (AIPS0_BASE_ADDR + 0x00042000) -#define MC_CGM3_BASE_ADDR (AIPS0_BASE_ADDR + 0x00045000) -#define MC_RGM_BASE_ADDR (AIPS0_BASE_ADDR + 0x00048000) -#define MC_ME_BASE_ADDR (AIPS0_BASE_ADDR + 0x0004A000) -#define MC_PCU_BASE_ADDR (AIPS0_BASE_ADDR + 0x0004B000) -#define ADC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0004D000) -#define FLEXTIMER_BASE_ADDR (AIPS0_BASE_ADDR + 0x0004F000) -#define I2C0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00051000) -#define LINFLEXD0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00053000) -#define FLEXCAN0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00055000) -#define SPI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00057000) -#define SPI2_BASE_ADDR (AIPS0_BASE_ADDR + 0x00059000) -#define CRC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0005B000) -#define USDHC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0005D000) -#define OCOTP_CONTROLLER_BASE_ADDR (AIPS0_BASE_ADDR + 0x0005F000) -#define WKPU_BASE_ADDR (AIPS0_BASE_ADDR + 0x00063000) -#define VIU0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00064000) -#define HPSMI_SRAM_CONTROLLER_BASE_ADDR (AIPS0_BASE_ADDR + 0x00068000) -#define SIUL2_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006C000) -#define SIPI_BASE_ADDR (AIPS0_BASE_ADDR + 0x00074000) -#define LFAST_BASE_ADDR (AIPS0_BASE_ADDR + 0x00078000) -#define SSE_BASE_ADDR (AIPS0_BASE_ADDR + 0x00079000) -#define SRC_SOC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0007C000) - -/* AIPS 1 */ -#define ERM_BASE_ADDR (AIPS1_BASE_ADDR + 0X000000000) -#define MSCM_BASE_ADDR (AIPS1_BASE_ADDR + 0X000001000) -#define SEMA42_BASE_ADDR (AIPS1_BASE_ADDR + 0X000002000) -#define INTC_MON_BASE_ADDR (AIPS1_BASE_ADDR + 0X000003000) -#define SWT2_BASE_ADDR (AIPS1_BASE_ADDR + 0X000004000) -#define SWT3_BASE_ADDR (AIPS1_BASE_ADDR + 0X000005000) -#define SWT4_BASE_ADDR (AIPS1_BASE_ADDR + 0X000006000) -#define STM1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000007000) -#define EIM_BASE_ADDR (AIPS1_BASE_ADDR + 0X000008000) -#define APB_BASE_ADDR (AIPS1_BASE_ADDR + 0X000009000) -#define XBIC_BASE_ADDR (AIPS1_BASE_ADDR + 0X000012000) -#define MIPI_BASE_ADDR (AIPS1_BASE_ADDR + 0X000020000) -#define DMAMUX1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000021000) -#define MMDC1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000022000) -#define MEW1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000023000) -#define DDR1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000024000) -#define CCI1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000025000) -#define QUADSPI0_BASE_ADDR (AIPS1_BASE_ADDR + 0X000026000) -#define PIT1_BASE_ADDR (AIPS1_BASE_ADDR + 0X00002A000) -#define FCCU_BASE_ADDR (AIPS1_BASE_ADDR + 0X000030000) -#define FLEXTIMER_FTM1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000036000) -#define I2C1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000038000) -#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0X00003A000) -#define LINFLEXD1_BASE_ADDR (AIPS1_BASE_ADDR + 0X00003C000) -#define FLEXCAN1_BASE_ADDR (AIPS1_BASE_ADDR + 0X00003E000) -#define SPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000040000) -#define SPI3_BASE_ADDR (AIPS1_BASE_ADDR + 0X000042000) -#define IPL_BASE_ADDR (AIPS1_BASE_ADDR + 0X000043000) -#define CGM_CMU_BASE_ADDR (AIPS1_BASE_ADDR + 0X000044000) -#define PMC_BASE_ADDR (AIPS1_BASE_ADDR + 0X000048000) -#define CRC1_BASE_ADDR (AIPS1_BASE_ADDR + 0X00004C000) -#define TMU_BASE_ADDR (AIPS1_BASE_ADDR + 0X00004E000) -#define VIU1_BASE_ADDR (AIPS1_BASE_ADDR + 0X000050000) -#define JPEG_BASE_ADDR (AIPS1_BASE_ADDR + 0X000054000) -#define H264_DEC_BASE_ADDR (AIPS1_BASE_ADDR + 0X000058000) -#define H264_ENC_BASE_ADDR (AIPS1_BASE_ADDR + 0X00005C000) -#define MEMU_BASE_ADDR (AIPS1_BASE_ADDR + 0X000060000) -#define STCU_BASE_ADDR (AIPS1_BASE_ADDR + 0X000064000) -#define SLFTST_CTRL_BASE_ADDR (AIPS1_BASE_ADDR + 0X000066000) -#define MCT_BASE_ADDR (AIPS1_BASE_ADDR + 0X000068000) -#define REP_BASE_ADDR (AIPS1_BASE_ADDR + 0X00006A000) -#define MBIST_CONTROLLER_BASE_ADDR (AIPS1_BASE_ADDR + 0X00006C000) -#define BOOT_LOADER_BASE_ADDR (AIPS1_BASE_ADDR + 0X00006F000) - -/* TODO Remove this after the IOMUX framework is implemented */ -#define IOMUXC_BASE_ADDR SIUL2_BASE_ADDR - -/* MUX mode and PAD ctrl are in one register */ -#define CONFIG_IOMUX_SHARE_CONF_REG - -#define FEC_QUIRK_ENET_MAC -#define I2C_QUIRK_REG - -/* MSCM interrupt router */ -#define MSCM_IRSPRC_CPn_EN 3 -#define MSCM_IRSPRC_NUM 176 -#define MSCM_CPXTYPE_RYPZ_MASK 0xFF -#define MSCM_CPXTYPE_RYPZ_OFFSET 0 -#define MSCM_CPXTYPE_PERS_MASK 0xFFFFFF00 -#define MSCM_CPXTYPE_PERS_OFFSET 8 -#define MSCM_CPXTYPE_PERS_A53 0x413533 -#define MSCM_CPXTYPE_PERS_CM4 0x434d34 - -#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) -#include - -/* System Reset Controller (SRC) */ -struct src { - u32 bmr1; - u32 bmr2; - u32 gpr1_boot; - u32 reserved_0x00C[61]; - u32 gpr1; - u32 gpr2; - u32 gpr3; - u32 gpr4; - u32 gpr5; - u32 gpr6; - u32 gpr7; - u32 reserved_0x11C[1]; - u32 gpr9; - u32 gpr10; - u32 gpr11; - u32 gpr12; - u32 gpr13; - u32 gpr14; - u32 gpr15; - u32 gpr16; - u32 reserved_0x140[1]; - u32 gpr17; - u32 gpr18; - u32 gpr19; - u32 gpr20; - u32 gpr21; - u32 gpr22; - u32 gpr23; - u32 gpr24; - u32 gpr25; - u32 gpr26; - u32 gpr27; - u32 reserved_0x16C[5]; - u32 pcie_config1; - u32 ddr_self_ref_ctrl; - u32 pcie_config0; - u32 reserved_0x18C[4]; - u32 soc_misc_config2; -}; - -/* SRC registers definitions */ - -/* SRC_GPR1 */ -#define SRC_GPR1_PLL_SOURCE(pll,val)( ((val) & SRC_GPR1_PLL_SOURCE_MASK) << \ - (SRC_GPR1_PLL_OFFSET + (pll)) ) -#define SRC_GPR1_PLL_SOURCE_MASK (0x1) - -#define SRC_GPR1_PLL_OFFSET (27) -#define SRC_GPR1_FIRC_CLK_SOURCE (0x0) -#define SRC_GPR1_XOSC_CLK_SOURCE (0x1) - -/* Periodic Interrupt Timer (PIT) */ -struct pit_reg { - u32 mcr; - u32 recv0[55]; - u32 ltmr64h; - u32 ltmr64l; - u32 recv1[6]; - u32 ldval0; - u32 cval0; - u32 tctrl0; - u32 tflg0; - u32 ldval1; - u32 cval1; - u32 tctrl1; - u32 tflg1; - u32 ldval2; - u32 cval2; - u32 tctrl2; - u32 tflg2; - u32 ldval3; - u32 cval3; - u32 tctrl3; - u32 tflg3; - u32 ldval4; - u32 cval4; - u32 tctrl4; - u32 tflg4; - u32 ldval5; - u32 cval5; - u32 tctrl5; - u32 tflg5; -}; - -/* Watchdog Timer (WDOG) */ -struct wdog_regs { - u32 cr; - u32 ir; - u32 to; - u32 wn; - u32 sr; - u32 co; - u32 sk; -}; - -/* UART */ -struct linflex_fsl { - u32 lincr1; - u32 linier; - u32 linsr; - u32 linesr; - u32 uartcr; - u32 uartsr; - u32 lintcsr; - u32 linocr; - u32 lintocr; - u32 linfbrr; - u32 linibrr; - u32 lincfr; - u32 lincr2; - u32 bidr; - u32 bdrl; - u32 bdrm; - u32 ifer; - u32 ifmi; - u32 ifmr; - u32 ifcr0; - u32 ifcr1; - u32 ifcr2; - u32 ifcr3; - u32 ifcr4; - u32 ifcr5; - u32 ifcr6; - u32 ifcr7; - u32 ifcr8; - u32 ifcr9; - u32 ifcr10; - u32 ifcr11; - u32 ifcr12; - u32 ifcr13; - u32 ifcr14; - u32 ifcr15; - u32 gcr; - u32 uartpto; - u32 uartcto; - u32 dmatxe; - u32 dmarxe; -}; - -/* MSCM Interrupt Router */ -struct mscm_ir { - u32 cpxtype; /* Processor x Type Register */ - u32 cpxnum; /* Processor x Number Register */ - u32 cpxmaster; /* Processor x Master Number Register */ - u32 cpxcount; /* Processor x Count Register */ - u32 cpxcfg0; /* Processor x Configuration 0 Register */ - u32 cpxcfg1; /* Processor x Configuration 1 Register */ - u32 cpxcfg2; /* Processor x Configuration 2 Register */ - u32 cpxcfg3; /* Processor x Configuration 3 Register */ - u32 cp0type; /* Processor 0 Type Register */ - u32 cp0num; /* Processor 0 Number Register */ - u32 cp0master; /* Processor 0 Master Number Register */ - u32 cp0count; /* Processor 0 Count Register */ - u32 cp0cfg0; /* Processor 0 Configuration 0 Register */ - u32 cp0cfg1; /* Processor 0 Configuration 1 Register */ - u32 cp0cfg2; /* Processor 0 Configuration 2 Register */ - u32 cp0cfg3; /* Processor 0 Configuration 3 Register */ - u32 cp1type; /* Processor 1 Type Register */ - u32 cp1num; /* Processor 1 Number Register */ - u32 cp1master; /* Processor 1 Master Number Register */ - u32 cp1count; /* Processor 1 Count Register */ - u32 cp1cfg0; /* Processor 1 Configuration 0 Register */ - u32 cp1cfg1; /* Processor 1 Configuration 1 Register */ - u32 cp1cfg2; /* Processor 1 Configuration 2 Register */ - u32 cp1cfg3; /* Processor 1 Configuration 3 Register */ - u32 reserved_0x060[232]; - u32 ocmdr0; /* On-Chip Memory Descriptor Register */ - u32 reserved_0x404[2]; - u32 ocmdr3; /* On-Chip Memory Descriptor Register */ - u32 reserved_0x410[28]; - u32 tcmdr[4]; /* Generic Tightly Coupled Memory Descriptor Register */ - u32 reserved_0x490[28]; - u32 cpce0; /* Core Parity Checking Enable Register 0 */ - u32 reserved_0x504[191]; - u32 ircp0ir; /* Interrupt Router CP0 Interrupt Register */ - u32 ircp1ir; /* Interrupt Router CP1 Interrupt Register */ - u32 reserved_0x808[6]; - u32 ircpgir; /* Interrupt Router CPU Generate Interrupt Register */ - u32 reserved_0x824[23]; - u16 irsprc[176]; /* Interrupt Router Shared Peripheral Routing Control Register */ - u32 reserved_0x9e0[136]; - u32 iahbbe0; /* Gasket Burst Enable Register */ - u32 reserved_0xc04[63]; - u32 ipcge; /* Interconnect Parity Checking Global Enable Register */ - u32 reserved_0xd04[3]; - u32 ipce[4]; /* Interconnect Parity Checking Enable Register */ - u32 reserved_0xd20[8]; - u32 ipcgie; /* Interconnect Parity Checking Global Injection Enable Register */ - u32 reserved_0xd44[3]; - u32 ipcie[4]; /* Interconnect Parity Checking Injection Enable Register */ -}; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-s32v234/lpddr2.h b/arch/arm/include/asm/arch-s32v234/lpddr2.h deleted file mode 100644 index c5efee5..0000000 --- a/arch/arm/include/asm/arch-s32v234/lpddr2.h +++ /dev/null @@ -1,74 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015-2016, Freescale Semiconductor, Inc. - */ - -#ifndef __ARCH_ARM_MACH_S32V234_LPDDR2_H__ -#define __ARCH_ARM_MACH_S32V234_LPDDR2_H__ - -/* definitions for LPDDR2 PAD values */ -#define LPDDR2_CLK0_PAD \ - (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm |\ - SIUL2_MSCR_DSE_48ohm | SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_CRPOINT_TRIM_1 | \ - SIUL2_MSCR_DCYCLE_TRIM_NONE) -#define LPDDR2_CKEn_PAD \ - (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm |\ - SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_DSE_48ohm) -#define LPDDR2_CS_Bn_PAD \ - (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm |\ - SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_DSE_48ohm) -#define LPDDR2_DMn_PAD \ - (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm |\ - SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_DSE_48ohm) -#define LPDDR2_DQSn_PAD \ - (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm | \ - SIUL2_MSCR_DSE_48ohm | SIUL2_MSCR_PUE_EN | SIUL2_MSCR_PUS_100K_DOWN | \ - SIUL2_MSCR_PKE_EN | SIUL2_MSCR_CRPOINT_TRIM_1 | SIUL2_MSCR_DCYCLE_TRIM_NONE) -#define LPDDR2_An_PAD \ - (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm | \ - SIUL2_MSCR_DSE_48ohm | SIUL2_MSCR_DDR_DO_TRIM_50PS | SIUL2_MSCR_DCYCLE_TRIM_LEFT | \ - SIUL2_MSCR_PUS_100K_UP) -#define LPDDR2_Dn_PAD \ - (SIUL2_MSCR_DDR_SEL_LPDDR2 | SIUL2_MSCR_DDR_INPUT_DIFF_DDR | SIUL2_MSCR_DDR_ODT_120ohm | \ - SIUL2_MSCR_DSE_48ohm | SIUL2_MSCR_DDR_DO_TRIM_50PS | SIUL2_MSCR_DCYCLE_TRIM_LEFT | \ - SIUL2_MSCR_PUS_100K_UP) - -#define _MDCTL 0x03010000 - -#define MMDC_MDSCR_CFG_VALUE 0x00008000 /* Set MDSCR[CON_REQ] (configuration request) */ -#define MMDC_MDCFG0_VALUE 0x464F61A5 /* tRFCab=70 (=130ns),tXSR=80 (=tRFCab+10ns),tXP=4 (=7.5ns),tXPDLL=n/a,tFAW=27 (50 ns),tCL(RL)=8 */ -#define MMDC_MDCFG1_VALUE 0x00180E63 /* tRCD=n/a,tRPpb=n/a,tRC=n/a ,tRAS=25 (=47ns),tRPA=n/a,tWR=8 (=15.0ns),tMRD=3,tWL=4 */ -#define MMDC_MDCFG2_VALUE 0x000000DD /* tDLLK=n/a,tRTP=4 (=7.5ns),tWTR=4 (=7.5ns),tRRD=6 (=10ns) */ -#define MMDC_MDCFG3LP_VALUE 0x001F099B /* RC_LP=tRAS+tRPab=32 (>60ns), tRCD_LP=10 (18ns) , tRPpb_LP=10 (18ns), tRPab_LP=12 (21ns) */ -#define MMDC_MDOTC_VALUE 0x00000000 /* tAOFPD=n/a,tAONPD=n/a,tANPD=n/a,tAXPD=n/a,tODTLon=n/a,tODT_idle_off=n/a */ -#define MMDC_MDMISC_VALUE 0x00001688 /* WALAT=0, BI bank interleave on, LPDDR2_S2=0, MIF3=3, RALAT=2, 8 banks, LPDDR2 */ -#define MMDC_MDOR_VALUE 0x00000010 /* tXPR=n/a , SDE_to_RST=n/a, RST_to_CKE=14 */ -#define MMDC_MPMUR0_VALUE 0x00000800 /* Force delay line initialisation */ -#define MMDC_MDSCR_RST_VALUE 0x003F8030 /* Reset command CS0 */ -#define MMDC_MPZQLP2CTL_VALUE 0x1B5F0109 /* ZQ_LP2_HW_ZQCS=0x1B (90ns spec), ZQ_LP2_HW_ZQCL=0x5F (160ns spec), ZQ_LP2_HW_ZQINIT=0x109 (1us spec) */ -#define MMDC_MPZQHWCTRL_VALUE 0xA0010003 /* ZQ_EARLY_COMPARATOR_EN_TIMER=0x14, TZQ_CS=n/a, TZQ_OPER=n/a, TZQ_INIT=n/a, ZQ_HW_FOR=1, ZQ_HW_PER=0, ZQ_MODE=3 */ -#define MMDC_MDSCR_MR1_VALUE 0xC2018030 /* Configure MR1: BL 4, burst type interleaved, wrap control no wrap, tWR cycles 8 */ -#define MMDC_MDSCR_MR2_VALUE 0x06028030 /* Configure MR2: RL=8, WL=4 */ -#define MMDC_MDSCR_MR3_VALUE 0x01038030 /* Configure MR3: DS=34R */ -#define MMDC_MDSCR_MR10_VALUE 0xFF0A8030 /* Configure MR10: Calibration at init */ -#define MMDC_MDASP_MODULE0_VALUE 0x0000007F /* 2Gb, 256 MB memory so CS0 is 256 MB (0x90000000) */ -#define MMDC_MPRDDLCTL_MODULE0_VALUE 0x4D4B4F4B /* Read delay line offsets */ -#define MMDC_MPWRDLCTL_MODULE0_VALUE 0x38383737 /* Write delay line offsets */ -#define MMDC_MPDGCTRL0_MODULE0_VALUE 0x20000000 /* Read DQS gating control 0 (disabled) */ -#define MMDC_MPDGCTRL1_MODULE0_VALUE 0x00000000 /* Read DQS gating control 1 */ -#define MMDC_MDASP_MODULE1_VALUE 0x0000007F /* 2Gb, 256 MB memory so CS0 is 256 MB (0xD0000000) */ -#define MMDC_MPRDDLCTL_MODULE1_VALUE 0x4D4B4F4B /* Read delay line offsets */ -#define MMDC_MPWRDLCTL_MODULE1_VALUE 0x38383737 /* Write delay line offsets */ -#define MMDC_MPDGCTRL0_MODULE1_VALUE 0x20000000 /* Read DQS gating control 0 (disabled) */ -#define MMDC_MPDGCTRL1_MODULE1_VALUE 0x00000000 /* Read DQS gating control 1 */ -#define MMDC_MDRWD_VALUE 0x0F9F26D2 /* Read/write command delay - default used */ -#define MMDC_MDPDC_VALUE 0x00020024 /* Power down control */ -#define MMDC_MDREF_VALUE 0x30B01800 /* Refresh control */ -#define MMDC_MPODTCTRL_VALUE 0x00000000 /* No ODT */ -#define MMDC_MDSCR_DEASSERT_VALUE 0x00000000 /* Deassert the configuration request */ - -/* set I/O pads for DDR */ -void lpddr2_config_iomux(uint8_t module); -void config_mmdc(uint8_t module); - -#endif diff --git a/arch/arm/include/asm/arch-s32v234/mc_cgm_regs.h b/arch/arm/include/asm/arch-s32v234/mc_cgm_regs.h deleted file mode 100644 index 957d48f..0000000 --- a/arch/arm/include/asm/arch-s32v234/mc_cgm_regs.h +++ /dev/null @@ -1,253 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015, Freescale Semiconductor, Inc. - */ - -#ifndef __ARCH_ARM_MACH_S32V234_MCCGM_REGS_H__ -#define __ARCH_ARM_MACH_S32V234_MCCGM_REGS_H__ - -#ifndef __ASSEMBLY__ - -/* MC_CGM registers definitions */ -/* MC_CGM_SC_SS */ -#define CGM_SC_SS(cgm_addr) ( ((cgm_addr) + 0x000007E4) ) -#define MC_CGM_SC_SEL_FIRC (0x0) -#define MC_CGM_SC_SEL_XOSC (0x1) -#define MC_CGM_SC_SEL_ARMPLL (0x2) -#define MC_CGM_SC_SEL_CLKDISABLE (0xF) - -/* MC_CGM_SC_DCn */ -#define CGM_SC_DCn(cgm_addr,dc) ( ((cgm_addr) + 0x000007E8) + ((dc) * 0x4) ) -#define MC_CGM_SC_DCn_PREDIV(val) (MC_CGM_SC_DCn_PREDIV_MASK & ((val) << MC_CGM_SC_DCn_PREDIV_OFFSET)) -#define MC_CGM_SC_DCn_PREDIV_MASK (0x00070000) -#define MC_CGM_SC_DCn_PREDIV_OFFSET (16) -#define MC_CGM_SC_DCn_DE (1 << 31) -#define MC_CGM_SC_SEL_MASK (0x0F000000) -#define MC_CGM_SC_SEL_OFFSET (24) - -/* MC_CGM_ACn_DCm */ -#define CGM_ACn_DCm(cgm_addr,ac,dc) ( ((cgm_addr) + 0x00000808) + ((ac) * 0x20) + ((dc) * 0x4) ) -#define MC_CGM_ACn_DCm_PREDIV(val) (MC_CGM_ACn_DCm_PREDIV_MASK & ((val) << MC_CGM_ACn_DCm_PREDIV_OFFSET)) - -/* - * MC_CGM_ACn_DCm_PREDIV_MASK is on 5 bits because practical test has shown - * that the 5th bit is always ignored during writes if the current - * MC_CGM_ACn_DCm_PREDIV field has only 4 bits - * - * The manual states only selectors 1, 5 and 15 have DC0_PREDIV on 5 bits - * - * This should be changed if any problems occur. - */ -#define MC_CGM_ACn_DCm_PREDIV_MASK (0x001F0000) -#define MC_CGM_ACn_DCm_PREDIV_OFFSET (16) -#define MC_CGM_ACn_DCm_DE (1 << 31) - -/* - * MC_CGM_ACn_SC/MC_CGM_ACn_SS - */ -#define CGM_ACn_SC(cgm_addr,ac) ((cgm_addr + 0x00000800) + ((ac) * 0x20)) -#define CGM_ACn_SS(cgm_addr,ac) ((cgm_addr + 0x00000804) + ((ac) * 0x20)) -#define MC_CGM_ACn_SEL_MASK (0x07000000) -#define MC_CGM_ACn_SEL_SET(source) (MC_CGM_ACn_SEL_MASK & (((source) & 0x7) << MC_CGM_ACn_SEL_OFFSET)) -#define MC_CGM_ACn_SEL_OFFSET (24) - -#define MC_CGM_ACn_SEL_FIRC (0x0) -#define MC_CGM_ACn_SEL_XOSC (0x1) -#define MC_CGM_ACn_SEL_ARMPLL (0x2) -/* - * According to the manual some PLL can be divided by X (X={1,3,5}): - * PERPLLDIVX, VIDEOPLLDIVX. - */ -#define MC_CGM_ACn_SEL_PERPLLDIVX (0x3) -#define MC_CGM_ACn_SEL_ENETPLL (0x4) -#define MC_CGM_ACn_SEL_DDRPLL (0x5) -#define MC_CGM_ACn_SEL_EXTSRCPAD (0x7) -#define MC_CGM_ACn_SEL_SYSCLK (0x8) -#define MC_CGM_ACn_SEL_VIDEOPLLDIVX (0x9) -#define MC_CGM_ACn_SEL_PERCLK (0xA) - -/* PLLDIG PLL Divider Register (PLLDIG_PLLDV) */ -#define PLLDIG_PLLDV(pll) ((MC_CGM0_BASE_ADDR + 0x00000028) + ((pll) * 0x80)) -#define PLLDIG_PLLDV_MFD(div) (PLLDIG_PLLDV_MFD_MASK & (div)) -#define PLLDIG_PLLDV_MFD_MASK (0x000000FF) - -/* - * PLLDIG_PLLDV_RFDPHIB has a different format for /32 according to - * the reference manual. This other value respect the formula 2^[RFDPHIBY+1] - */ -#define PLLDIG_PLLDV_RFDPHI_SET(val) (PLLDIG_PLLDV_RFDPHI_MASK & (((val) & PLLDIG_PLLDV_RFDPHI_MAXVALUE) << PLLDIG_PLLDV_RFDPHI_OFFSET)) -#define PLLDIG_PLLDV_RFDPHI_MASK (0x003F0000) -#define PLLDIG_PLLDV_RFDPHI_MAXVALUE (0x3F) -#define PLLDIG_PLLDV_RFDPHI_OFFSET (16) - -#define PLLDIG_PLLDV_RFDPHI1_SET(val) (PLLDIG_PLLDV_RFDPHI1_MASK & (((val) & PLLDIG_PLLDV_RFDPHI1_MAXVALUE) << PLLDIG_PLLDV_RFDPHI1_OFFSET)) -#define PLLDIG_PLLDV_RFDPHI1_MASK (0x7E000000) -#define PLLDIG_PLLDV_RFDPHI1_MAXVALUE (0x3F) -#define PLLDIG_PLLDV_RFDPHI1_OFFSET (25) - -#define PLLDIG_PLLDV_PREDIV_SET(val) (PLLDIG_PLLDV_PREDIV_MASK & (((val) & PLLDIG_PLLDV_PREDIV_MAXVALUE) << PLLDIG_PLLDV_PREDIV_OFFSET)) -#define PLLDIG_PLLDV_PREDIV_MASK (0x00007000) -#define PLLDIG_PLLDV_PREDIV_MAXVALUE (0x7) -#define PLLDIG_PLLDV_PREDIV_OFFSET (12) - -/* PLLDIG PLL Fractional Divide Register (PLLDIG_PLLFD) */ -#define PLLDIG_PLLFD(pll) ((MC_CGM0_BASE_ADDR + 0x00000030) + ((pll) * 0x80)) -#define PLLDIG_PLLFD_MFN_SET(val) (PLLDIG_PLLFD_MFN_MASK & (val)) -#define PLLDIG_PLLFD_MFN_MASK (0x00007FFF) -#define PLLDIG_PLLFD_SMDEN (1 << 30) - -/* PLL Calibration Register 1 (PLLDIG_PLLCAL1) */ -#define PLLDIG_PLLCAL1(pll) ((MC_CGM0_BASE_ADDR + 0x00000038) + ((pll) * 0x80)) -#define PLLDIG_PLLCAL1_NDAC1_SET(val) (PLLDIG_PLLCAL1_NDAC1_MASK & ((val) << PLLDIG_PLLCAL1_NDAC1_OFFSET)) -#define PLLDIG_PLLCAL1_NDAC1_OFFSET (24) -#define PLLDIG_PLLCAL1_NDAC1_MASK (0x7F000000) - -/* Digital Frequency Synthesizer (DFS) */ -/* According to the manual there are 3 DFS modules only for ARM_PLL, DDR_PLL, ENET_PLL */ -#define DFS0_BASE_ADDR (MC_CGM0_BASE_ADDR + 0x00000040) - -/* DFS DLL Program Register 1 */ -#define DFS_DLLPRG1(pll) (DFS0_BASE_ADDR + 0x00000000 + ((pll) * 0x80)) - -#define DFS_DLLPRG1_V2IGC_SET(val) (DFS_DLLPRG1_V2IGC_MASK & ((val) << DFS_DLLPRG1_V2IGC_OFFSET)) -#define DFS_DLLPRG1_V2IGC_OFFSET (0) -#define DFS_DLLPRG1_V2IGC_MASK (0x00000007) - -#define DFS_DLLPRG1_LCKWT_SET(val) (DFS_DLLPRG1_LCKWT_MASK & ((val) << DFS_DLLPRG1_LCKWT_OFFSET)) -#define DFS_DLLPRG1_LCKWT_OFFSET (4) -#define DFS_DLLPRG1_LCKWT_MASK (0x00000030) - -#define DFS_DLLPRG1_DACIN_SET(val) (DFS_DLLPRG1_DACIN_MASK & ((val) << DFS_DLLPRG1_DACIN_OFFSET)) -#define DFS_DLLPRG1_DACIN_OFFSET (6) -#define DFS_DLLPRG1_DACIN_MASK (0x000001C0) - -#define DFS_DLLPRG1_CALBYPEN_SET(val) (DFS_DLLPRG1_CALBYPEN_MASK & ((val) << DFS_DLLPRG1_CALBYPEN_OFFSET)) -#define DFS_DLLPRG1_CALBYPEN_OFFSET (9) -#define DFS_DLLPRG1_CALBYPEN_MASK (0x00000200) - -#define DFS_DLLPRG1_VSETTLCTRL_SET(val) (DFS_DLLPRG1_VSETTLCTRL_MASK & ((val) << DFS_DLLPRG1_VSETTLCTRL_OFFSET)) -#define DFS_DLLPRG1_VSETTLCTRL_OFFSET (10) -#define DFS_DLLPRG1_VSETTLCTRL_MASK (0x00000C00) - -#define DFS_DLLPRG1_CPICTRL_SET(val) (DFS_DLLPRG1_CPICTRL_MASK & ((val) << DFS_DLLPRG1_CPICTRL_OFFSET)) -#define DFS_DLLPRG1_CPICTRL_OFFSET (12) -#define DFS_DLLPRG1_CPICTRL_MASK (0x00007000) - -/* DFS Control Register (DFS_CTRL) */ -#define DFS_CTRL(pll) (DFS0_BASE_ADDR + 0x00000018 + ((pll) * 0x80)) -#define DFS_CTRL_DLL_LOLIE (1 << 0) -#define DFS_CTRL_DLL_RESET (1 << 1) - -/* DFS Port Status Register (DFS_PORTSR) */ -#define DFS_PORTSR(pll) (DFS0_BASE_ADDR + 0x0000000C +((pll) * 0x80)) -/* DFS Port Reset Register (DFS_PORTRESET) */ -#define DFS_PORTRESET(pll) (DFS0_BASE_ADDR + 0x00000014 + ((pll) * 0x80)) -#define DFS_PORTRESET_PORTRESET_SET(val) (DFS_PORTRESET_PORTRESET_MASK | (((val) & DFS_PORTRESET_PORTRESET_MAXVAL) << DFS_PORTRESET_PORTRESET_OFFSET)) -#define DFS_PORTRESET_PORTRESET_MAXVAL (0xF) -#define DFS_PORTRESET_PORTRESET_MASK (0x0000000F) -#define DFS_PORTRESET_PORTRESET_OFFSET (0) - -/* DFS Divide Register Portn (DFS_DVPORTn) */ -#define DFS_DVPORTn(pll,n) (DFS0_BASE_ADDR + ((pll) * 0x80) + (0x0000001C + ((n) * 0x4))) - -/* - * The mathematical formula for fdfs_clockout is the following: - * fdfs_clckout = fdfs_clkin / ( DFS_DVPORTn[MFI] + (DFS_DVPORTn[MFN]/256) ) - */ -#define DFS_DVPORTn_MFI_SET(val) (DFS_DVPORTn_MFI_MASK & (((val) & DFS_DVPORTn_MFI_MAXVAL) << DFS_DVPORTn_MFI_OFFSET) ) -#define DFS_DVPORTn_MFN_SET(val) (DFS_DVPORTn_MFN_MASK & (((val) & DFS_DVPORTn_MFN_MAXVAL) << DFS_DVPORTn_MFN_OFFSET) ) -#define DFS_DVPORTn_MFI_MASK (0x0000FF00) -#define DFS_DVPORTn_MFN_MASK (0x000000FF) -#define DFS_DVPORTn_MFI_MAXVAL (0xFF) -#define DFS_DVPORTn_MFN_MAXVAL (0xFF) -#define DFS_DVPORTn_MFI_OFFSET (8) -#define DFS_DVPORTn_MFN_OFFSET (0) -#define DFS_MAXNUMBER (4) - -#define DFS_PARAMS_Nr (3) - -/* Frequencies are in Hz */ -#define FIRC_CLK_FREQ (48000000) -#define XOSC_CLK_FREQ (40000000) - -#define PLL_MIN_FREQ (650000000) -#define PLL_MAX_FREQ (1300000000) - -#define ARM_PLL_PHI0_FREQ (1000000000) -#define ARM_PLL_PHI1_FREQ (1000000000) -/* ARM_PLL_PHI1_DFS1_FREQ - 266 Mhz */ -#define ARM_PLL_PHI1_DFS1_EN (1) -#define ARM_PLL_PHI1_DFS1_MFI (3) -#define ARM_PLL_PHI1_DFS1_MFN (194) -/* ARM_PLL_PHI1_DFS2_REQ - 600 Mhz */ -#define ARM_PLL_PHI1_DFS2_EN (1) -#define ARM_PLL_PHI1_DFS2_MFI (1) -#define ARM_PLL_PHI1_DFS2_MFN (170) -/* ARM_PLL_PHI1_DFS3_FREQ - 600 Mhz */ -#define ARM_PLL_PHI1_DFS3_EN (1) -#define ARM_PLL_PHI1_DFS3_MFI (1) -#define ARM_PLL_PHI1_DFS3_MFN (170) -#define ARM_PLL_PHI1_DFS_Nr (3) -#define ARM_PLL_PLLDV_PREDIV (2) -#define ARM_PLL_PLLDV_MFD (50) -#define ARM_PLL_PLLDV_MFN (0) - -#define PERIPH_PLL_PHI0_FREQ (400000000) -#define PERIPH_PLL_PHI1_FREQ (100000000) -#define PERIPH_PLL_PHI1_DFS_Nr (0) -#define PERIPH_PLL_PLLDV_PREDIV (1) -#define PERIPH_PLL_PLLDV_MFD (30) -#define PERIPH_PLL_PLLDV_MFN (0) - -#define ENET_PLL_PHI0_FREQ (500000000) -#define ENET_PLL_PHI1_FREQ (1000000000) -/* ENET_PLL_PHI1_DFS1_FREQ - 350 Mhz*/ -#define ENET_PLL_PHI1_DFS1_EN (1) -#define ENET_PLL_PHI1_DFS1_MFI (2) -#define ENET_PLL_PHI1_DFS1_MFN (219) -/* ENET_PLL_PHI1_DFS2_FREQ - 350 Mhz*/ -#define ENET_PLL_PHI1_DFS2_EN (1) -#define ENET_PLL_PHI1_DFS2_MFI (2) -#define ENET_PLL_PHI1_DFS2_MFN (219) -/* ENET_PLL_PHI1_DFS3_FREQ - 320 Mhz*/ -#define ENET_PLL_PHI1_DFS3_EN (1) -#define ENET_PLL_PHI1_DFS3_MFI (3) -#define ENET_PLL_PHI1_DFS3_MFN (32) -/* ENET_PLL_PHI1_DFS1_FREQ - 50 Mhz*/ -#define ENET_PLL_PHI1_DFS4_EN (1) -#define ENET_PLL_PHI1_DFS4_MFI (2) -#define ENET_PLL_PHI1_DFS4_MFN (0) -#define ENET_PLL_PHI1_DFS_Nr (4) -#define ENET_PLL_PLLDV_PREDIV (2) -#define ENET_PLL_PLLDV_MFD (50) -#define ENET_PLL_PLLDV_MFN (0) - -#define DDR_PLL_PHI0_FREQ (533000000) -#define DDR_PLL_PHI1_FREQ (1066000000) -/* DDR_PLL_PHI1_DFS1_FREQ - 500 Mhz */ -#define DDR_PLL_PHI1_DFS1_EN (1) -#define DDR_PLL_PHI1_DFS1_MFI (2) -#define DDR_PLL_PHI1_DFS1_MFN (33) -/* DDR_PLL_PHI1_DFS2_REQ - 500 Mhz */ -#define DDR_PLL_PHI1_DFS2_EN (1) -#define DDR_PLL_PHI1_DFS2_MFI (2) -#define DDR_PLL_PHI1_DFS2_MFN (33) -/* DDR_PLL_PHI1_DFS3_FREQ - 350 Mhz */ -#define DDR_PLL_PHI1_DFS3_EN (1) -#define DDR_PLL_PHI1_DFS3_MFI (3) -#define DDR_PLL_PHI1_DFS3_MFN (11) -#define DDR_PLL_PHI1_DFS_Nr (3) -#define DDR_PLL_PLLDV_PREDIV (2) -#define DDR_PLL_PLLDV_MFD (53) -#define DDR_PLL_PLLDV_MFN (6144) - -#define VIDEO_PLL_PHI0_FREQ (600000000) -#define VIDEO_PLL_PHI1_FREQ (0) -#define VIDEO_PLL_PHI1_DFS_Nr (0) -#define VIDEO_PLL_PLLDV_PREDIV (1) -#define VIDEO_PLL_PLLDV_MFD (30) -#define VIDEO_PLL_PLLDV_MFN (0) - -#endif - -#endif /*__ARCH_ARM_MACH_S32V234_MCCGM_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-s32v234/mc_me_regs.h b/arch/arm/include/asm/arch-s32v234/mc_me_regs.h deleted file mode 100644 index 1671af4..0000000 --- a/arch/arm/include/asm/arch-s32v234/mc_me_regs.h +++ /dev/null @@ -1,198 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015, Freescale Semiconductor, Inc. - */ - -#ifndef __ARCH_ARM_MACH_S32V234_MCME_REGS_H__ -#define __ARCH_ARM_MACH_S32V234_MCME_REGS_H__ - -#ifndef __ASSEMBLY__ - -/* MC_ME registers definitions */ - -/* MC_ME_GS */ -#define MC_ME_GS (MC_ME_BASE_ADDR + 0x00000000) - -#define MC_ME_GS_S_SYSCLK_FIRC (0x0 << 0) -#define MC_ME_GS_S_SYSCLK_FXOSC (0x1 << 0) -#define MC_ME_GS_S_SYSCLK_ARMPLL (0x2 << 0) -#define MC_ME_GS_S_STSCLK_DISABLE (0xF << 0) -#define MC_ME_GS_S_FIRC (1 << 4) -#define MC_ME_GS_S_XOSC (1 << 5) -#define MC_ME_GS_S_ARMPLL (1 << 6) -#define MC_ME_GS_S_PERPLL (1 << 7) -#define MC_ME_GS_S_ENETPLL (1 << 8) -#define MC_ME_GS_S_DDRPLL (1 << 9) -#define MC_ME_GS_S_VIDEOPLL (1 << 10) -#define MC_ME_GS_S_MVR (1 << 20) -#define MC_ME_GS_S_PDO (1 << 23) -#define MC_ME_GS_S_MTRANS (1 << 27) -#define MC_ME_GS_S_CRT_MODE_RESET (0x0 << 28) -#define MC_ME_GS_S_CRT_MODE_TEST (0x1 << 28) -#define MC_ME_GS_S_CRT_MODE_DRUN (0x3 << 28) -#define MC_ME_GS_S_CRT_MODE_RUN0 (0x4 << 28) -#define MC_ME_GS_S_CRT_MODE_RUN1 (0x5 << 28) -#define MC_ME_GS_S_CRT_MODE_RUN2 (0x6 << 28) -#define MC_ME_GS_S_CRT_MODE_RUN3 (0x7 << 28) - -/* MC_ME_MCTL */ -#define MC_ME_MCTL (MC_ME_BASE_ADDR + 0x00000004) - -#define MC_ME_MCTL_KEY (0x00005AF0) -#define MC_ME_MCTL_INVERTEDKEY (0x0000A50F) -#define MC_ME_MCTL_RESET (0x0 << 28) -#define MC_ME_MCTL_TEST (0x1 << 28) -#define MC_ME_MCTL_DRUN (0x3 << 28) -#define MC_ME_MCTL_RUN0 (0x4 << 28) -#define MC_ME_MCTL_RUN1 (0x5 << 28) -#define MC_ME_MCTL_RUN2 (0x6 << 28) -#define MC_ME_MCTL_RUN3 (0x7 << 28) - -/* MC_ME_ME */ -#define MC_ME_ME (MC_ME_BASE_ADDR + 0x00000008) - -#define MC_ME_ME_RESET_FUNC (1 << 0) -#define MC_ME_ME_TEST (1 << 1) -#define MC_ME_ME_DRUN (1 << 3) -#define MC_ME_ME_RUN0 (1 << 4) -#define MC_ME_ME_RUN1 (1 << 5) -#define MC_ME_ME_RUN2 (1 << 6) -#define MC_ME_ME_RUN3 (1 << 7) - -/* MC_ME_RUN_PCn */ -#define MC_ME_RUN_PCn(n) (MC_ME_BASE_ADDR + 0x00000080 + 0x4 * (n)) - -#define MC_ME_RUN_PCn_RESET (1 << 0) -#define MC_ME_RUN_PCn_TEST (1 << 1) -#define MC_ME_RUN_PCn_DRUN (1 << 3) -#define MC_ME_RUN_PCn_RUN0 (1 << 4) -#define MC_ME_RUN_PCn_RUN1 (1 << 5) -#define MC_ME_RUN_PCn_RUN2 (1 << 6) -#define MC_ME_RUN_PCn_RUN3 (1 << 7) - -/* - * MC_ME_RESET_MC/MC_ME_TEST_MC - * MC_ME_DRUN_MC - * MC_ME_RUNn_MC - */ -#define MC_ME_RESET_MC (MC_ME_BASE_ADDR + 0x00000020) -#define MC_ME_TEST_MC (MC_ME_BASE_ADDR + 0x00000024) -#define MC_ME_DRUN_MC (MC_ME_BASE_ADDR + 0x0000002C) -#define MC_ME_RUNn_MC(n) (MC_ME_BASE_ADDR + 0x00000030 + 0x4 * (n)) - -#define MC_ME_RUNMODE_MC_SYSCLK(val) (MC_ME_RUNMODE_MC_SYSCLK_MASK & (val)) -#define MC_ME_RUNMODE_MC_SYSCLK_MASK (0x0000000F) -#define MC_ME_RUNMODE_MC_FIRCON (1 << 4) -#define MC_ME_RUNMODE_MC_XOSCON (1 << 5) -#define MC_ME_RUNMODE_MC_PLL(pll) (1 << (6 + (pll))) -#define MC_ME_RUNMODE_MC_MVRON (1 << 20) -#define MC_ME_RUNMODE_MC_PDO (1 << 23) -#define MC_ME_RUNMODE_MC_PWRLVL0 (1 << 28) -#define MC_ME_RUNMODE_MC_PWRLVL1 (1 << 29) -#define MC_ME_RUNMODE_MC_PWRLVL2 (1 << 30) - -/* MC_ME_DRUN_SEC_CC_I */ -#define MC_ME_DRUN_SEC_CC_I (MC_ME_BASE_ADDR + 0x260) -/* MC_ME_RUNn_SEC_CC_I */ -#define MC_ME_RUNn_SEC_CC_I(n) (MC_ME_BASE_ADDR + 0x270 + (n) * 0x10) -#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK(val,offset) ((MC_ME_RUNMODE_SEC_CC_I_SYSCLK_MASK & (val)) << offset) -#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK1_OFFSET (4) -#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK2_OFFSET (8) -#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK3_OFFSET (12) -#define MC_ME_RUNMODE_SEC_CC_I_SYSCLK_MASK (0x3) - -/* - * ME_PCTLn - * Please note that these registers are 8 bits width, so - * the operations over them should be done using 8 bits operations. - */ -#define MC_ME_PCTLn_RUNPCm(n) ( (n) & MC_ME_PCTLn_RUNPCm_MASK ) -#define MC_ME_PCTLn_RUNPCm_MASK (0x7) - -/* DEC200 Peripheral Control Register */ -#define MC_ME_PCTL39 (MC_ME_BASE_ADDR + 0x000000E4) -/* 2D-ACE Peripheral Control Register */ -#define MC_ME_PCTL40 (MC_ME_BASE_ADDR + 0x000000EB) -/* ENET Peripheral Control Register */ -#define MC_ME_PCTL50 (MC_ME_BASE_ADDR + 0x000000F1) -/* DMACHMUX0 Peripheral Control Register */ -#define MC_ME_PCTL49 (MC_ME_BASE_ADDR + 0x000000F2) -/* CSI0 Peripheral Control Register */ -#define MC_ME_PCTL48 (MC_ME_BASE_ADDR + 0x000000F3) -/* MMDC0 Peripheral Control Register */ -#define MC_ME_PCTL54 (MC_ME_BASE_ADDR + 0x000000F5) -/* FRAY Peripheral Control Register */ -#define MC_ME_PCTL52 (MC_ME_BASE_ADDR + 0x000000F7) -/* PIT0 Peripheral Control Register */ -#define MC_ME_PCTL58 (MC_ME_BASE_ADDR + 0x000000F9) -/* FlexTIMER0 Peripheral Control Register */ -#define MC_ME_PCTL79 (MC_ME_BASE_ADDR + 0x0000010C) -/* SARADC0 Peripheral Control Register */ -#define MC_ME_PCTL77 (MC_ME_BASE_ADDR + 0x0000010E) -/* LINFLEX0 Peripheral Control Register */ -#define MC_ME_PCTL83 (MC_ME_BASE_ADDR + 0x00000110) -/* IIC0 Peripheral Control Register */ -#define MC_ME_PCTL81 (MC_ME_BASE_ADDR + 0x00000112) -/* DSPI0 Peripheral Control Register */ -#define MC_ME_PCTL87 (MC_ME_BASE_ADDR + 0x00000114) -/* CANFD0 Peripheral Control Register */ -#define MC_ME_PCTL85 (MC_ME_BASE_ADDR + 0x00000116) -/* CRC0 Peripheral Control Register */ -#define MC_ME_PCTL91 (MC_ME_BASE_ADDR + 0x00000118) -/* DSPI2 Peripheral Control Register */ -#define MC_ME_PCTL89 (MC_ME_BASE_ADDR + 0x0000011A) -/* SDHC Peripheral Control Register */ -#define MC_ME_PCTL93 (MC_ME_BASE_ADDR + 0x0000011E) -/* VIU0 Peripheral Control Register */ -#define MC_ME_PCTL100 (MC_ME_BASE_ADDR + 0x00000127) -/* HPSMI Peripheral Control Register */ -#define MC_ME_PCTL104 (MC_ME_BASE_ADDR + 0x0000012B) -/* SIPI Peripheral Control Register */ -#define MC_ME_PCTL116 (MC_ME_BASE_ADDR + 0x00000137) -/* LFAST Peripheral Control Register */ -#define MC_ME_PCTL120 (MC_ME_BASE_ADDR + 0x0000013B) -/* MMDC1 Peripheral Control Register */ -#define MC_ME_PCTL162 (MC_ME_BASE_ADDR + 0x00000161) -/* DMACHMUX1 Peripheral Control Register */ -#define MC_ME_PCTL161 (MC_ME_BASE_ADDR + 0x00000162) -/* CSI1 Peripheral Control Register */ -#define MC_ME_PCTL160 (MC_ME_BASE_ADDR + 0x00000163) -/* QUADSPI0 Peripheral Control Register */ -#define MC_ME_PCTL166 (MC_ME_BASE_ADDR + 0x00000165) -/* PIT1 Peripheral Control Register */ -#define MC_ME_PCTL170 (MC_ME_BASE_ADDR + 0x00000169) -/* FlexTIMER1 Peripheral Control Register */ -#define MC_ME_PCTL182 (MC_ME_BASE_ADDR + 0x00000175) -/* IIC2 Peripheral Control Register */ -#define MC_ME_PCTL186 (MC_ME_BASE_ADDR + 0x00000179) -/* IIC1 Peripheral Control Register */ -#define MC_ME_PCTL184 (MC_ME_BASE_ADDR + 0x0000017B) -/* CANFD1 Peripheral Control Register */ -#define MC_ME_PCTL190 (MC_ME_BASE_ADDR + 0x0000017D) -/* LINFLEX1 Peripheral Control Register */ -#define MC_ME_PCTL188 (MC_ME_BASE_ADDR + 0x0000017F) -/* DSPI3 Peripheral Control Register */ -#define MC_ME_PCTL194 (MC_ME_BASE_ADDR + 0x00000181) -/* DSPI1 Peripheral Control Register */ -#define MC_ME_PCTL192 (MC_ME_BASE_ADDR + 0x00000183) -/* TSENS Peripheral Control Register */ -#define MC_ME_PCTL206 (MC_ME_BASE_ADDR + 0x0000018D) -/* CRC1 Peripheral Control Register */ -#define MC_ME_PCTL204 (MC_ME_BASE_ADDR + 0x0000018F) -/* VIU1 Peripheral Control Register */ -#define MC_ME_PCTL208 (MC_ME_BASE_ADDR + 0x00000193) -/* JPEG Peripheral Control Register */ -#define MC_ME_PCTL212 (MC_ME_BASE_ADDR + 0x00000197) -/* H264_DEC Peripheral Control Register */ -#define MC_ME_PCTL216 (MC_ME_BASE_ADDR + 0x0000019B) -/* H264_ENC Peripheral Control Register */ -#define MC_ME_PCTL220 (MC_ME_BASE_ADDR + 0x0000019F) -/* MBIST Peripheral Control Register */ -#define MC_ME_PCTL236 (MC_ME_BASE_ADDR + 0x000001A9) - -/* Core status register */ -#define MC_ME_CS (MC_ME_BASE_ADDR + 0x000001C0) - -#endif - -#endif /*__ARCH_ARM_MACH_S32V234_MCME_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-s32v234/mc_rgm_regs.h b/arch/arm/include/asm/arch-s32v234/mc_rgm_regs.h deleted file mode 100644 index 34501b2..0000000 --- a/arch/arm/include/asm/arch-s32v234/mc_rgm_regs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015, Freescale Semiconductor, Inc. - */ - -#ifndef __ARCH_ARM_MACH_S32V234_MCRGM_REGS_H__ -#define __ARCH_ARM_MACH_S32V234_MCRGM_REGS_H__ - -#define MC_RGM_DES (MC_RGM_BASE_ADDR) -#define MC_RGM_FES (MC_RGM_BASE_ADDR + 0x300) -#define MC_RGM_FERD (MC_RGM_BASE_ADDR + 0x310) -#define MC_RGM_FBRE (MC_RGM_BASE_ADDR + 0x330) -#define MC_RGM_FESS (MC_RGM_BASE_ADDR + 0x340) -#define MC_RGM_DDR_HE (MC_RGM_BASE_ADDR + 0x350) -#define MC_RGM_DDR_HS (MC_RGM_BASE_ADDR + 0x354) -#define MC_RGM_FRHE (MC_RGM_BASE_ADDR + 0x358) -#define MC_RGM_FREC (MC_RGM_BASE_ADDR + 0x600) -#define MC_RGM_FRET (MC_RGM_BASE_ADDR + 0x607) -#define MC_RGM_DRET (MC_RGM_BASE_ADDR + 0x60B) - -/* function reset sources mask */ -#define F_SWT4 0x8000 -#define F_JTAG 0x400 -#define F_FCCU_SOFT 0x40 -#define F_FCCU_HARD 0x20 -#define F_SOFT_FUNC 0x8 -#define F_ST_DONE 0x4 -#define F_EXT_RST 0x1 - -#endif /* __ARCH_ARM_MACH_S32V234_MCRGM_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-s32v234/mmdc.h b/arch/arm/include/asm/arch-s32v234/mmdc.h deleted file mode 100644 index 8d74ae0..0000000 --- a/arch/arm/include/asm/arch-s32v234/mmdc.h +++ /dev/null @@ -1,88 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015, Freescale Semiconductor, Inc. - */ - -#ifndef __ARCH_ARM_MACH_S32V234_MMDC_H__ -#define __ARCH_ARM_MACH_S32V234_MMDC_H__ - -#define MMDC0 0 -#define MMDC1 1 - -#define MMDC_MDCTL 0x0 -#define MMDC_MDPDC 0x4 -#define MMDC_MDOTC 0x8 -#define MMDC_MDCFG0 0xC -#define MMDC_MDCFG1 0x10 -#define MMDC_MDCFG2 0x14 -#define MMDC_MDMISC 0x18 -#define MMDC_MDSCR 0x1C -#define MMDC_MDREF 0x20 -#define MMDC_MDRWD 0x2C -#define MMDC_MDOR 0x30 -#define MMDC_MDMRR 0x34 -#define MMDC_MDCFG3LP 0x38 -#define MMDC_MDMR4 0x3C -#define MMDC_MDASP 0x40 -#define MMDC_MAARCR 0x400 -#define MMDC_MAPSR 0x404 -#define MMDC_MAEXIDR0 0x408 -#define MMDC_MAEXIDR1 0x40C -#define MMDC_MADPCR0 0x410 -#define MMDC_MADPCR1 0x414 -#define MMDC_MADPSR0 0x418 -#define MMDC_MADPSR1 0x41C -#define MMDC_MADPSR2 0x420 -#define MMDC_MADPSR3 0x424 -#define MMDC_MADPSR4 0x428 -#define MMDC_MADPSR5 0x42C -#define MMDC_MASBS0 0x430 -#define MMDC_MASBS1 0x434 -#define MMDC_MAGENP 0x440 -#define MMDC_MPZQHWCTRL 0x800 -#define MMDC_MPWLGCR 0x808 -#define MMDC_MPWLDECTRL0 0x80C -#define MMDC_MPWLDECTRL1 0x810 -#define MMDC_MPWLDLST 0x814 -#define MMDC_MPODTCTRL 0x818 -#define MMDC_MPRDDQBY0DL 0x81C -#define MMDC_MPRDDQBY1DL 0x820 -#define MMDC_MPRDDQBY2DL 0x824 -#define MMDC_MPRDDQBY3DL 0x828 -#define MMDC_MPDGCTRL0 0x83C -#define MMDC_MPDGCTRL1 0x840 -#define MMDC_MPDGDLST0 0x844 -#define MMDC_MPRDDLCTL 0x848 -#define MMDC_MPRDDLST 0x84C -#define MMDC_MPWRDLCTL 0x850 -#define MMDC_MPWRDLST 0x854 -#define MMDC_MPZQLP2CTL 0x85C -#define MMDC_MPRDDLHWCTL 0x860 -#define MMDC_MPWRDLHWCTL 0x864 -#define MMDC_MPRDDLHWST0 0x868 -#define MMDC_MPRDDLHWST1 0x86C -#define MMDC_MPWRDLHWST1 0x870 -#define MMDC_MPWRDLHWST2 0x874 -#define MMDC_MPWLHWERR 0x878 -#define MMDC_MPDGHWST0 0x87C -#define MMDC_MPDGHWST1 0x880 -#define MMDC_MPDGHWST2 0x884 -#define MMDC_MPDGHWST3 0x888 -#define MMDC_MPPDCMPR1 0x88C -#define MMDC_MPPDCMPR2 0x890 -#define MMDC_MPSWDAR0 0x894 -#define MMDC_MPSWDRDR0 0x898 -#define MMDC_MPSWDRDR1 0x89C -#define MMDC_MPSWDRDR2 0x8A0 -#define MMDC_MPSWDRDR3 0x8A4 -#define MMDC_MPSWDRDR4 0x8A8 -#define MMDC_MPSWDRDR5 0x8AC -#define MMDC_MPSWDRDR6 0x8B0 -#define MMDC_MPSWDRDR7 0x8B4 -#define MMDC_MPMUR0 0x8B8 -#define MMDC_MPDCCR 0x8C0 - -#define MMDC_MPMUR0_FRC_MSR (1 << 11) -#define MMDC_MPZQHWCTRL_ZQ_HW_FOR (1 << 16) - -#endif diff --git a/arch/arm/include/asm/arch-s32v234/siul.h b/arch/arm/include/asm/arch-s32v234/siul.h deleted file mode 100644 index 7572581..0000000 --- a/arch/arm/include/asm/arch-s32v234/siul.h +++ /dev/null @@ -1,149 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015, Freescale Semiconductor, Inc. - */ - -#ifndef __ARCH_ARM_MACH_S32V234_SIUL_H__ -#define __ARCH_ARM_MACH_S32V234_SIUL_H__ - -#include "ddr.h" - -#define SIUL2_MIDR1 (SIUL2_BASE_ADDR + 0x00000004) -#define SIUL2_MIDR2 (SIUL2_BASE_ADDR + 0x00000008) -#define SIUL2_DISR0 (SIUL2_BASE_ADDR + 0x00000010) -#define SIUL2_DIRER0 (SIUL2_BASE_ADDR + 0x00000018) -#define SIUL2_DIRSR0 (SIUL2_BASE_ADDR + 0x00000020) -#define SIUL2_IREER0 (SIUL2_BASE_ADDR + 0x00000028) -#define SIUL2_IFEER0 (SIUL2_BASE_ADDR + 0x00000030) -#define SIUL2_IFER0 (SIUL2_BASE_ADDR + 0x00000038) - -#define SIUL2_IFMCR_BASE (SIUL2_BASE_ADDR + 0x00000040) -#define SIUL2_IFMCRn(i) (SIUL2_IFMCR_BASE + 4 * (i)) - -#define SIUL2_IFCPR (SIUL2_BASE_ADDR + 0x000000C0) - -/* SIUL2_MSCR specifications as stated in Reference Manual: - * 0 - 359 Output Multiplexed Signal Configuration Registers - * 512- 1023 Input Multiplexed Signal Configuration Registers */ -#define SIUL2_MSCR_BASE (SIUL2_BASE_ADDR + 0x00000240) -#define SIUL2_MSCRn(i) (SIUL2_MSCR_BASE + 4 * (i)) - -#define SIUL2_IMCR_BASE (SIUL2_BASE_ADDR + 0x00000A40) -#define SIUL2_IMCRn(i) (SIUL2_IMCR_BASE + 4 * (i)) - -#define SIUL2_GPDO_BASE (SIUL2_BASE_ADDR + 0x00001300) -#define SIUL2_GPDOn(i) (SIUL2_GPDO_BASE + 4 * (i)) - -#define SIUL2_GPDI_BASE (SIUL2_BASE_ADDR + 0x00001500) -#define SIUL2_GPDIn(i) (SIUL2_GPDI_BASE + 4 * (i)) - -#define SIUL2_PGPDO_BASE (SIUL2_BASE_ADDR + 0x00001700) -#define SIUL2_PGPDOn(i) (SIUL2_PGPDO_BASE + 2 * (i)) - -#define SIUL2_PGPDI_BASE (SIUL2_BASE_ADDR + 0x00001740) -#define SIUL2_PGPDIn(i) (SIUL2_PGPDI_BASE + 2 * (i)) - -#define SIUL2_MPGPDO_BASE (SIUL2_BASE_ADDR + 0x00001780) -#define SIUL2_MPGPDOn(i) (SIUL2_MPGPDO_BASE + 4 * (i)) - -/* SIUL2_MSCR masks */ -#define SIUL2_MSCR_DDR_DO_TRIM(v) ((v) & 0xC0000000) -#define SIUL2_MSCR_DDR_DO_TRIM_MIN (0 << 30) -#define SIUL2_MSCR_DDR_DO_TRIM_50PS (1 << 30) -#define SIUL2_MSCR_DDR_DO_TRIM_100PS (2 << 30) -#define SIUL2_MSCR_DDR_DO_TRIM_150PS (3 << 30) - -#define SIUL2_MSCR_DDR_INPUT(v) ((v) & 0x20000000) -#define SIUL2_MSCR_DDR_INPUT_CMOS (0 << 29) -#define SIUL2_MSCR_DDR_INPUT_DIFF_DDR (1 << 29) - -#define SIUL2_MSCR_DDR_SEL(v) ((v) & 0x18000000) -#define SIUL2_MSCR_DDR_SEL_DDR3 (0 << 27) -#define SIUL2_MSCR_DDR_SEL_LPDDR2 (2 << 27) - -#define SIUL2_MSCR_DDR_ODT(v) ((v) & 0x07000000) -#define SIUL2_MSCR_DDR_ODT_120ohm (1 << 24) -#define SIUL2_MSCR_DDR_ODT_60ohm (2 << 24) -#define SIUL2_MSCR_DDR_ODT_40ohm (3 << 24) -#define SIUL2_MSCR_DDR_ODT_30ohm (4 << 24) -#define SIUL2_MSCR_DDR_ODT_24ohm (5 << 24) -#define SIUL2_MSCR_DDR_ODT_20ohm (6 << 24) -#define SIUL2_MSCR_DDR_ODT_17ohm (7 << 24) - -#define SIUL2_MSCR_DCYCLE_TRIM(v) ((v) & 0x00C00000) -#define SIUL2_MSCR_DCYCLE_TRIM_NONE (0 << 22) -#define SIUL2_MSCR_DCYCLE_TRIM_LEFT (1 << 22) -#define SIUL2_MSCR_DCYCLE_TRIM_RIGHT (2 << 22) - -#define SIUL2_MSCR_OBE(v) ((v) & 0x00200000) -#define SIUL2_MSCR_OBE_EN (1 << 21) - -#define SIUL2_MSCR_ODE(v) ((v) & 0x00100000) -#define SIUL2_MSCR_ODE_EN (1 << 20) - -#define SIUL2_MSCR_IBE(v) ((v) & 0x00010000) -#define SIUL2_MSCR_IBE_EN (1 << 19) - -#define SIUL2_MSCR_HYS(v) ((v) & 0x00400000) -#define SIUL2_MSCR_HYS_EN (1 << 18) - -#define SIUL2_MSCR_INV(v) ((v) & 0x00020000) -#define SIUL2_MSCR_INV_EN (1 << 17) - -#define SIUL2_MSCR_PKE(v) ((v) & 0x00010000) -#define SIUL2_MSCR_PKE_EN (1 << 16) - -#define SIUL2_MSCR_SRE(v) ((v) & 0x0000C000) -#define SIUL2_MSCR_SRE_SPEED_LOW_50 (0 << 14) -#define SIUL2_MSCR_SRE_SPEED_LOW_100 (1 << 14) -#define SIUL2_MSCR_SRE_SPEED_HIGH_100 (2 << 14) -#define SIUL2_MSCR_SRE_SPEED_HIGH_200 (3 << 14) - -#define SIUL2_MSCR_PUE(v) ((v) & 0x00002000) -#define SIUL2_MSCR_PUE_EN (1 << 13) - -#define SIUL2_MSCR_PUS(v) ((v) & 0x00001800) -#define SIUL2_MSCR_PUS_100K_DOWN (0 << 11) -#define SIUL2_MSCR_PUS_50K_DOWN (1 << 11) -#define SIUL2_MSCR_PUS_100K_UP (2 << 11) -#define SIUL2_MSCR_PUS_33K_UP (3 << 11) - -#define SIUL2_MSCR_DSE(v) ((v) & 0x00000700) -#define SIUL2_MSCR_DSE_240ohm (1 << 8) -#define SIUL2_MSCR_DSE_120ohm (2 << 8) -#define SIUL2_MSCR_DSE_80ohm (3 << 8) -#define SIUL2_MSCR_DSE_60ohm (4 << 8) -#define SIUL2_MSCR_DSE_48ohm (5 << 8) -#define SIUL2_MSCR_DSE_40ohm (6 << 8) -#define SIUL2_MSCR_DSE_34ohm (7 << 8) - -#define SIUL2_MSCR_CRPOINT_TRIM(v) ((v) & 0x000000C0) -#define SIUL2_MSCR_CRPOINT_TRIM_1 (1 << 6) - -#define SIUL2_MSCR_SMC(v) ((v) & 0x00000020) -#define SIUL2_MSCR_MUX_MODE(v) ((v) & 0x0000000f) -#define SIUL2_MSCR_MUX_MODE_ALT1 (0x1) -#define SIUL2_MSCR_MUX_MODE_ALT2 (0x2) -#define SIUL2_MSCR_MUX_MODE_ALT3 (0x3) - -/* UART settings */ -#define SIUL2_UART0_TXD_PAD 12 -#define SIUL2_UART_TXD (SIUL2_MSCR_OBE_EN | SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_DSE_60ohm | \ - SIUL2_MSCR_SRE_SPEED_LOW_100 | SIUL2_MSCR_MUX_MODE_ALT1) - -#define SIUL2_UART0_MSCR_RXD_PAD 11 -#define SIUL2_UART0_IMCR_RXD_PAD 200 - -#define SIUL2_UART_MSCR_RXD (SIUL2_MSCR_PUE_EN | SIUL2_MSCR_IBE_EN | SIUL2_MSCR_DCYCLE_TRIM_RIGHT) -#define SIUL2_UART_IMCR_RXD (SIUL2_MSCR_MUX_MODE_ALT2) - -/* uSDHC settings */ -#define SIUL2_USDHC_PAD_CTRL_BASE (SIUL2_MSCR_SRE_SPEED_HIGH_200 | SIUL2_MSCR_OBE_EN | \ - SIUL2_MSCR_DSE_34ohm | SIUL2_MSCR_PKE_EN | SIUL2_MSCR_IBE_EN | \ - SIUL2_MSCR_PUS_100K_UP | SIUL2_MSCR_PUE_EN ) -#define SIUL2_USDHC_PAD_CTRL_CMD (SIUL2_USDHC_PAD_CTRL_BASE | SIUL2_MSCR_MUX_MODE_ALT1) -#define SIUL2_USDHC_PAD_CTRL_CLK (SIUL2_USDHC_PAD_CTRL_BASE | SIUL2_MSCR_MUX_MODE_ALT2) -#define SIUL2_USDHC_PAD_CTRL_DAT0_3 (SIUL2_USDHC_PAD_CTRL_BASE | SIUL2_MSCR_MUX_MODE_ALT2) -#define SIUL2_USDHC_PAD_CTRL_DAT4_7 (SIUL2_USDHC_PAD_CTRL_BASE | SIUL2_MSCR_MUX_MODE_ALT3) - -#endif /*__ARCH_ARM_MACH_S32V234_SIUL_H__ */ -- cgit v1.1 From d59bc09d829ca61c6a2a0722ad761c5975ffd837 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:50 -0500 Subject: arm: Remove bcm958712k board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jon Mason Signed-off-by: Tom Rini --- arch/arm/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8d5332a..4314391 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1951,7 +1951,6 @@ source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" -source "board/broadcom/bcmns2/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/cirrus/edb93xx/Kconfig" -- cgit v1.1 From 3cb80c73a86a365d6920ec6266de33f57dd7d58b Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:51 -0500 Subject: arm: Remove wb45n board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Ben Whitten Signed-off-by: Tom Rini --- arch/arm/mach-at91/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c78a308..5880e65 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -303,11 +303,6 @@ config TARGET_VINCO select SUPPORT_SPL imply CMD_DM -config TARGET_WB45N - bool "Support Laird WB45N" - select CPU_ARM926EJS - select SUPPORT_SPL - config TARGET_WB50N bool "Support Laird WB50N" select BOARD_EARLY_INIT_F @@ -358,7 +353,6 @@ source "board/ronetix/pm9g45/Kconfig" source "board/siemens/corvus/Kconfig" source "board/siemens/taurus/Kconfig" source "board/siemens/smartweb/Kconfig" -source "board/laird/wb45n/Kconfig" source "board/laird/wb50n/Kconfig" config SPL_LDSCRIPT -- cgit v1.1 From 80c642f16d81c3c74622d6220eeec8de6d41bc8a Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:52 -0500 Subject: arm: Remove wb50n board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Ben Whitten Signed-off-by: Tom Rini --- arch/arm/mach-at91/Kconfig | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 5880e65..22f6e41 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -303,14 +303,6 @@ config TARGET_VINCO select SUPPORT_SPL imply CMD_DM -config TARGET_WB50N - bool "Support Laird WB50N" - select BOARD_EARLY_INIT_F - select BOARD_LATE_INIT - select CPU_V7A - select SUPPORT_SPL - select ATMEL_SFR - endchoice config ATMEL_SFR @@ -353,7 +345,6 @@ source "board/ronetix/pm9g45/Kconfig" source "board/siemens/corvus/Kconfig" source "board/siemens/taurus/Kconfig" source "board/siemens/smartweb/Kconfig" -source "board/laird/wb50n/Kconfig" config SPL_LDSCRIPT default "arch/arm/mach-at91/arm926ejs/u-boot-spl.lds" if CPU_ARM926EJS -- cgit v1.1 From 65a591f6395ab9481e0110e590973deac2031f76 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:53 -0500 Subject: arm: Remove picosam9g45 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Erik van Luijk Signed-off-by: Tom Rini --- arch/arm/mach-at91/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 22f6e41..1adf09b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -134,11 +134,6 @@ config TARGET_PM9G45 bool "Ronetix pm9g45 board" select AT91SAM9G45 -config TARGET_PICOSAM9G45 - bool "Mini-box picosam9g45 board" - select AT91SAM9M10G45 - select SUPPORT_SPL - config TARGET_AT91SAM9N12EK bool "Atmel AT91SAM9N12-EK board" select AT91SAM9N12 @@ -338,7 +333,6 @@ source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" source "board/gardena/smart-gateway-at91sam/Kconfig" source "board/l+g/vinco/Kconfig" -source "board/mini-box/picosam9g45/Kconfig" source "board/ronetix/pm9261/Kconfig" source "board/ronetix/pm9263/Kconfig" source "board/ronetix/pm9g45/Kconfig" -- cgit v1.1 From 0f6807e77b076673c0fbaa31283cfa89e752083d Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:54 -0500 Subject: arm: Remove bcm28155_ap board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Steve Rae Signed-off-by: Tom Rini --- arch/arm/Kconfig | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4314391..779e8ca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -662,12 +662,6 @@ config TARGET_BCM23550_W1D imply CRC32_VERIFY imply FAT_WRITE -config TARGET_BCM28155_AP - bool "Support bcm28155_ap" - select CPU_V7A - imply CRC32_VERIFY - imply FAT_WRITE - config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7A @@ -1945,7 +1939,6 @@ source "board/Marvell/octeontx2/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm23550_w1d/Kconfig" -source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcm963158/Kconfig" source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" -- cgit v1.1 From 938c1747383de6c1269d1cf838d05758b7a43a18 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:55 -0500 Subject: arm: Remove bcm23550_w1d board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Steve Rae Signed-off-by: Tom Rini --- arch/arm/Kconfig | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 779e8ca..1442ee3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -656,12 +656,6 @@ config ARCH_BCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. -config TARGET_BCM23550_W1D - bool "Support bcm23550_w1d" - select CPU_V7A - imply CRC32_VERIFY - imply FAT_WRITE - config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7A @@ -1938,7 +1932,6 @@ source "board/Marvell/octeontx/Kconfig" source "board/Marvell/octeontx2/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" -source "board/broadcom/bcm23550_w1d/Kconfig" source "board/broadcom/bcm963158/Kconfig" source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" -- cgit v1.1 From da42646bf4007d501562e342a4b1af1ce2a41297 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:57 -0500 Subject: arm: Remove Broadcom Cygnus boards These boards have not been converted to CONFIG_DM by the deadline. Remove them. Cc: Steve Rae Signed-off-by: Tom Rini --- arch/arm/Kconfig | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1442ee3..01b5ba5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -346,7 +346,7 @@ config SYS_CACHELINE_SIZE choice prompt "Select the ARM data write cache policy" default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || \ - TARGET_BCMNSP || CPU_PXA || RZA1 + CPU_PXA || RZA1 default SYS_ARM_CACHE_WRITEBACK config SYS_ARM_CACHE_WRITEBACK @@ -667,10 +667,6 @@ config TARGET_BCMCYGNUS imply HASH_VERIFY imply NETDEVICES -config TARGET_BCMNSP - bool "Support bcmnsp" - select CPU_V7A - config TARGET_BCMNS2 bool "Support Broadcom Northstar2" select ARM64 @@ -1935,8 +1931,6 @@ source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm963158/Kconfig" source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" -source "board/broadcom/bcmcygnus/Kconfig" -source "board/broadcom/bcmnsp/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/cirrus/edb93xx/Kconfig" -- cgit v1.1 From 96f599009a5b3bf6cd92007204e06fa53f9a1dfb Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:05:58 -0500 Subject: arm: Remove platinum_picon board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index cd71560..1b2340d 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -493,14 +493,6 @@ config TARGET_LITEBOARD select BOARD_LATE_INIT select MX6UL_LITESOM -config TARGET_PLATINUM_PICON - bool "platinum-picon" - select SUPPORT_SPL - -config TARGET_PLATINUM_TITANIUM - bool "platinum-titanium" - select SUPPORT_SPL - config TARGET_PCM058 bool "Phytec PCM058 i.MX6 Quad" depends on MX6Q @@ -683,7 +675,6 @@ source "board/ge/bx50v3/Kconfig" source "board/ge/b1x5v2/Kconfig" source "board/aristainetos/Kconfig" source "board/armadeus/opos6uldev/Kconfig" -source "board/barco/platinum/Kconfig" source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" source "board/bticino/mamoj/Kconfig" -- cgit v1.1 From d137604c20a448cab66590268dc56f255976ee18 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:01 -0500 Subject: arm: Remove tricorder board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Thomas Weber Signed-off-by: Tom Rini --- arch/arm/mach-omap2/omap3/Kconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 0a6eb4c..16e449c 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -97,10 +97,6 @@ config TARGET_OMAP3_PANDORA select OMAP3_GPIO_4 select OMAP3_GPIO_6 -config TARGET_TRICORDER - bool "Tricorder" - select OMAP3_GPIO_2 - config TARGET_OMAP3_LOGIC bool "OMAP3 Logic" select BOARD_LATE_INIT @@ -167,7 +163,6 @@ source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig" source "board/ti/am3517crane/Kconfig" -source "board/corscience/tricorder/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" -- cgit v1.1 From 7db3958f0724b5e9ae99a5c15c5cecf2ed4dfa5f Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:02 -0500 Subject: arm: Remove omap3_ha board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese Cc: Tapani Utriainen Signed-off-by: Tom Rini --- arch/arm/mach-omap2/omap3/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 16e449c..8bf42aa 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -165,7 +165,6 @@ source "board/isee/igep00x0/Kconfig" source "board/ti/am3517crane/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" -source "board/technexion/tao3530/Kconfig" source "board/lg/sniper/Kconfig" endif -- cgit v1.1 From 6d426bb173d7fdde102c3709bfad02d3bd6c6b7a Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:03 -0500 Subject: arm: Remove am3517_crane board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Nagendra T S Signed-off-by: Tom Rini --- arch/arm/mach-omap2/omap3/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 8bf42aa..81c898b 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -89,9 +89,6 @@ config TARGET_OMAP3_OVERO select OMAP3_GPIO_6 imply CMD_DM -config TARGET_AM3517_CRANE - bool "am3517_crane" - config TARGET_OMAP3_PANDORA bool "OMAP3 Pandora" select OMAP3_GPIO_4 @@ -162,7 +159,6 @@ source "board/ti/beagle/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig" -source "board/ti/am3517crane/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" source "board/lg/sniper/Kconfig" -- cgit v1.1 From b3b0680ec386599ea48ce090999fcbb69ba5eb74 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:04 -0500 Subject: arm: Remove kc1 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Paul Kocialkowski Signed-off-by: Tom Rini --- arch/arm/mach-omap2/omap4/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig index 899289b..cdac11c 100644 --- a/arch/arm/mach-omap2/omap4/Kconfig +++ b/arch/arm/mach-omap2/omap4/Kconfig @@ -10,9 +10,6 @@ config TARGET_OMAP4_PANDA config TARGET_OMAP4_SDP4430 bool "TI OMAP4 SDP4430" -config TARGET_KC1 - bool "Amazon Kindle Fire (first generation)" - endchoice config SYS_SOC @@ -20,6 +17,5 @@ config SYS_SOC source "board/ti/panda/Kconfig" source "board/ti/sdp4430/Kconfig" -source "board/amazon/kc1/Kconfig" endif -- cgit v1.1 From ddfc00400965b787f53b0d50f1ca1c7f1b28ce92 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:06 -0500 Subject: arm: Remove xpress board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 1b2340d..4a9ae52 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -623,15 +623,6 @@ config TARGET_WARP depends on MX6SL select BOARD_LATE_INIT -config TARGET_XPRESS - bool "CCV xPress" - depends on MX6UL - select BOARD_LATE_INIT - select DM - select DM_THERMAL - select SUPPORT_SPL - imply CMD_DM - config TARGET_ZC5202 bool "zc5202" select BOARD_LATE_INIT @@ -678,7 +669,6 @@ source "board/armadeus/opos6uldev/Kconfig" source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" source "board/bticino/mamoj/Kconfig" -source "board/ccv/xpress/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" source "board/dhelectronics/dh_imx6/Kconfig" -- cgit v1.1 From a0cacddcafe531fa71189cf0bed1d77d456ad947 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:08 -0500 Subject: arm: Remove zc5202 and zc5601 boards These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. Cc: Stefano Babic Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 4a9ae52..7d22acd 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -623,22 +623,6 @@ config TARGET_WARP depends on MX6SL select BOARD_LATE_INIT -config TARGET_ZC5202 - bool "zc5202" - select BOARD_LATE_INIT - select DM - select DM_THERMAL - select SUPPORT_SPL - imply CMD_DM - -config TARGET_ZC5601 - bool "zc5601" - select BOARD_LATE_INIT - select DM - select DM_THERMAL - select SUPPORT_SPL - imply CMD_DM - config TARGET_BRPPT2 bool "brppt2" depends on MX6QDL @@ -672,7 +656,6 @@ source "board/bticino/mamoj/Kconfig" source "board/compulab/cm_fx6/Kconfig" source "board/congatec/cgtqmx6eval/Kconfig" source "board/dhelectronics/dh_imx6/Kconfig" -source "board/el/el6x/Kconfig" source "board/embest/mx6boards/Kconfig" source "board/engicam/imx6q/Kconfig" source "board/engicam/imx6ul/Kconfig" -- cgit v1.1 From 397a43dc563b469389f07faba1a90ca7b159e694 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:09 -0500 Subject: arm: Remove pfla02 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefano Babic Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 7d22acd..2a522f8 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -502,12 +502,6 @@ config TARGET_PCM058 select OF_CONTROL imply CMD_DM -config TARGET_PFLA02 - bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad" - depends on MX6QDL - select BOARD_LATE_INIT - select SUPPORT_SPL - config TARGET_PCL063 bool "PHYTEC PCL063 (phyCORE-i.MX6UL)" depends on MX6UL @@ -671,7 +665,6 @@ source "board/freescale/mx6ul_14x14_evk/Kconfig" source "board/freescale/mx6ullevk/Kconfig" source "board/grinn/liteboard/Kconfig" source "board/phytec/pcm058/Kconfig" -source "board/phytec/pfla02/Kconfig" source "board/phytec/pcl063/Kconfig" source "board/gateworks/gw_ventana/Kconfig" source "board/kosagi/novena/Kconfig" -- cgit v1.1 From 4d248628480fd3991ff462b114806d5648f284e0 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:11 -0500 Subject: arm: Remove mx53evk board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jason Liu Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx5/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig index 4ee7f6b..4bbda4b 100644 --- a/arch/arm/mach-imx/mx5/Kconfig +++ b/arch/arm/mach-imx/mx5/Kconfig @@ -52,11 +52,6 @@ config TARGET_MX53CX9020 select MX53 imply CMD_DM -config TARGET_MX53EVK - bool "Support mx53evk" - select BOARD_LATE_INIT - select MX53 - config TARGET_MX53LOCO bool "Support mx53loco" select BOARD_LATE_INIT @@ -83,7 +78,6 @@ config SYS_SOC source "board/beckhoff/mx53cx9020/Kconfig" source "board/freescale/mx51evk/Kconfig" -source "board/freescale/mx53evk/Kconfig" source "board/freescale/mx53loco/Kconfig" source "board/ge/mx53ppd/Kconfig" source "board/inversepath/usbarmory/Kconfig" -- cgit v1.1 From 80b386abe3072352896a3d84a679432205aa511e Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:13 -0500 Subject: arm: Remove ts4800 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Lucile Quirion Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx5/Kconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig index 4bbda4b..580b458 100644 --- a/arch/arm/mach-imx/mx5/Kconfig +++ b/arch/arm/mach-imx/mx5/Kconfig @@ -63,10 +63,6 @@ config TARGET_MX53PPD help Enable support for the GE Healthcare PPD. -config TARGET_TS4800 - bool "Support TS4800" - select MX51 - config TARGET_USBARMORY bool "Support USB armory" select MX53 @@ -83,6 +79,5 @@ source "board/ge/mx53ppd/Kconfig" source "board/inversepath/usbarmory/Kconfig" source "board/k+p/kp_imx53/Kconfig" source "board/menlo/m53menlo/Kconfig" -source "board/technologic/ts4800/Kconfig" endif -- cgit v1.1 From defd0dcfb9de21f11259ffbaf49728d12eba86e0 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:14 -0500 Subject: arm: Remove titanium board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 2a522f8..1d849b6 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -542,10 +542,6 @@ config TARGET_TBS2910 bool "TBS2910 Matrix ARM mini PC" depends on MX6Q -config TARGET_TITANIUM - bool "titanium" - depends on MX6Q - config TARGET_KP_IMX6Q_TPC bool "K+P KP_IMX6Q_TPC i.MX6 Quad" depends on MX6QDL @@ -644,7 +640,6 @@ source "board/ge/bx50v3/Kconfig" source "board/ge/b1x5v2/Kconfig" source "board/aristainetos/Kconfig" source "board/armadeus/opos6uldev/Kconfig" -source "board/barco/titanium/Kconfig" source "board/boundary/nitrogen6x/Kconfig" source "board/bticino/mamoj/Kconfig" source "board/compulab/cm_fx6/Kconfig" -- cgit v1.1 From 178d70b5b3362cfeeebc75f7066e85a6cc3293bf Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:15 -0500 Subject: arm: Remove cgtqmx6eval board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Otavio Salvador Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 1d849b6..accabc8 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -144,15 +144,6 @@ config TARGET_ARISTAINETOS2CCSLB imply CMD_SATA imply CMD_DM -config TARGET_CGTQMX6EVAL - bool "cgtqmx6eval" - depends on MX6QDL - select BOARD_LATE_INIT - select DM - select DM_THERMAL - select SUPPORT_SPL - imply CMD_DM - config TARGET_CM_FX6 bool "CM-FX6" depends on MX6QDL @@ -643,7 +634,6 @@ source "board/armadeus/opos6uldev/Kconfig" source "board/boundary/nitrogen6x/Kconfig" source "board/bticino/mamoj/Kconfig" source "board/compulab/cm_fx6/Kconfig" -source "board/congatec/cgtqmx6eval/Kconfig" source "board/dhelectronics/dh_imx6/Kconfig" source "board/embest/mx6boards/Kconfig" source "board/engicam/imx6q/Kconfig" -- cgit v1.1 From 4bbcec08ebecbad4952dd6d22f1e261f2680589d Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:16 -0500 Subject: arm: Remove mx6dlarm2 board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jason Liu Cc: Ye Li Signed-off-by: Tom Rini --- arch/arm/mach-imx/mx6/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index accabc8..9450e6a 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -287,9 +287,6 @@ config TARGET_MX6MEMCAL and characterize the memory layout of a new design during the initial development and pre-production stages. -config TARGET_MX6QARM2 - bool "mx6qarm2" - config TARGET_MX6DL_MAMOJ bool "Support BTicino Mamoj" depends on MX6QDL @@ -638,7 +635,6 @@ source "board/dhelectronics/dh_imx6/Kconfig" source "board/embest/mx6boards/Kconfig" source "board/engicam/imx6q/Kconfig" source "board/engicam/imx6ul/Kconfig" -source "board/freescale/mx6qarm2/Kconfig" source "board/freescale/mx6memcal/Kconfig" source "board/freescale/mx6sabreauto/Kconfig" source "board/freescale/mx6sabresd/Kconfig" -- cgit v1.1 From bf85995a25b65746b3b585a86227e868ca454bd4 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:20 -0500 Subject: ppc: Remove TARGET_T1040QDS references The TARGET_T1040QDS platforms have been removed already, drop some remaining references in the code. Signed-off-by: Tom Rini --- arch/powerpc/include/asm/fsl_secure_boot.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 035bf12..25db9f2 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -25,7 +25,6 @@ defined(CONFIG_TARGET_T4240QDS) || \ defined(CONFIG_TARGET_T2080QDS) || \ defined(CONFIG_TARGET_T2080RDB) || \ - defined(CONFIG_TARGET_T1040QDS) || \ defined(CONFIG_TARGET_T1040RDB) || \ defined(CONFIG_TARGET_T1040D4RDB) || \ defined(CONFIG_TARGET_T1042RDB) || \ -- cgit v1.1 From 2322b9568f9e091becf8dd56c907e30e6b5166b1 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:21 -0500 Subject: ppc: Remove T2081QDS board and ARCH_T2081 support This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. It is also the only ARCH_T2081 board so remove that support as well. Cc: Shengzhou Liu Cc: Ruchika Gupta Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc85xx/Kconfig | 36 +------------------------------ arch/powerpc/cpu/mpc85xx/Makefile | 2 -- arch/powerpc/cpu/mpc85xx/speed.c | 4 ++-- arch/powerpc/cpu/mpc85xx/t2080_serdes.c | 4 ---- arch/powerpc/include/asm/config_mpc85xx.h | 5 +---- arch/powerpc/include/asm/immap_85xx.h | 4 ++-- 6 files changed, 6 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 124c22f..f7679f7 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -210,14 +210,6 @@ config TARGET_T2080RDB imply CMD_SATA imply PANIC_HANG -config TARGET_T2081QDS - bool "Support T2081QDS" - select ARCH_T2081 - select SUPPORT_SPL - select PHYS_64BIT - select FSL_DDR_FIRST_SLOT_QUAD_CAPABLE - select FSL_DDR_INTERACTIVE - config TARGET_T4160RDB bool "Support T4160RDB" select ARCH_T4160 @@ -928,29 +920,6 @@ config ARCH_T2080 imply CMD_REGINFO imply FSL_SATA -config ARCH_T2081 - bool - select E500MC - select E6500 - select FSL_LAW - select SYS_FSL_DDR_VER_47 - select SYS_FSL_ERRATUM_A006379 - select SYS_FSL_ERRATUM_A006593 - select SYS_FSL_ERRATUM_A007186 - select SYS_FSL_ERRATUM_A007212 - select SYS_FSL_ERRATUM_A009942 - select SYS_FSL_ERRATUM_ESDHC111 - select FSL_PCIE_RESET - select SYS_FSL_HAS_DDR3 - select SYS_FSL_HAS_SEC - select SYS_FSL_QORIQ_CHASSIS2 - select SYS_FSL_SEC_BE - select SYS_FSL_SEC_COMPAT_4 - select SYS_PPC64 - select FSL_IFC - imply CMD_NAND - imply CMD_REGINFO - config ARCH_T4160 bool select E500MC @@ -1052,8 +1021,7 @@ config MAX_CPUS ARCH_P5040 || \ ARCH_T1040 || \ ARCH_T1042 || \ - ARCH_T2080 || \ - ARCH_T2081 + ARCH_T2080 default 2 if ARCH_B4420 || \ ARCH_BSC9132 || \ ARCH_MPC8572 || \ @@ -1110,7 +1078,6 @@ config SYS_CCSRBAR_DEFAULT ARCH_T1040 || \ ARCH_T1042 || \ ARCH_T2080 || \ - ARCH_T2081 || \ ARCH_T4160 || \ ARCH_T4240 default 0xe0000000 if ARCH_QEMU_E500 @@ -1297,7 +1264,6 @@ config SYS_FSL_NUM_LAWS ARCH_P5020 || \ ARCH_P5040 || \ ARCH_T2080 || \ - ARCH_T2081 || \ ARCH_T4160 || \ ARCH_T4240 default 16 if ARCH_T1023 || \ diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 14e4662..30dd1b4 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -51,7 +51,6 @@ obj-$(CONFIG_ARCH_T1042) += t1040_ids.o obj-$(CONFIG_ARCH_T1023) += t1024_ids.o obj-$(CONFIG_ARCH_T1024) += t1024_ids.o obj-$(CONFIG_ARCH_T2080) += t2080_ids.o -obj-$(CONFIG_ARCH_T2081) += t2080_ids.o obj-$(CONFIG_QE) += qe_io.o @@ -90,7 +89,6 @@ obj-$(CONFIG_ARCH_T1042) += t1040_serdes.o obj-$(CONFIG_ARCH_T1023) += t1024_serdes.o obj-$(CONFIG_ARCH_T1024) += t1024_serdes.o obj-$(CONFIG_ARCH_T2080) += t2080_serdes.o -obj-$(CONFIG_ARCH_T2081) += t2080_serdes.o obj-y += cpu.o obj-y += cpu_init.o diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 9c89ce5..59a007b 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -127,7 +127,7 @@ void get_sys_info(sys_info_t *sys_info) * T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0 */ #if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160) || \ - defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081) + defined(CONFIG_ARCH_T2080) svr = get_svr(); switch (SVR_SOC_VER(svr)) { case SVR_T4240: @@ -198,7 +198,7 @@ void get_sys_info(sys_info_t *sys_info) #endif #if defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) || \ - defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081) + defined(CONFIG_ARCH_T2080) #define FM1_CLK_SEL 0xe0000000 #define FM1_CLK_SHIFT 29 #elif defined(CONFIG_ARCH_T1024) || defined(CONFIG_ARCH_T1023) diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c index 32cfcc0..5f34aab 100644 --- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c @@ -160,7 +160,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = { {} }; -#ifndef CONFIG_ARCH_T2081 static const struct serdes_config serdes2_cfg_tbl[] = { /* SerDes 2 */ {0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, @@ -176,13 +175,10 @@ static const struct serdes_config serdes2_cfg_tbl[] = { {0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2} }, {} }; -#endif static const struct serdes_config *serdes_cfg_tbl[] = { serdes1_cfg_tbl, -#ifndef CONFIG_ARCH_T2081 serdes2_cfg_tbl, -#endif }; enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 4d70259..f7ab5e3 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -364,7 +364,7 @@ #define QE_NUM_OF_SNUM 28 #define CONFIG_SYS_FSL_SFP_VER_3_0 -#elif defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081) +#elif defined(CONFIG_ARCH_T2080) #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 @@ -381,9 +381,6 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#elif defined(CONFIG_ARCH_T2081) -#define CONFIG_SYS_NUM_FM1_DTSEC 6 -#define CONFIG_SYS_NUM_FM1_10GEC 2 #endif #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_PME_PLAT_CLK_DIV 1 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 905613f..3fc56ef 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1808,7 +1808,7 @@ typedef struct ccsr_gur { #define PXCKEN_MASK 0x80000000 #define PXCK_MASK 0x00FF0000 #define PXCK_BITS_START 16 -#elif defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081) +#elif defined(CONFIG_ARCH_T2080) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000 @@ -1880,7 +1880,7 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000 #define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 #endif -#if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081) +#if defined(CONFIG_ARCH_T2080) #define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ #define FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII 0x00000000 #define FSL_CORENET_RCWSR13_EC1_GPIO 0x40000000 -- cgit v1.1 From ddfb9aef65d5f109a62895f001cc1a6d70251361 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:22 -0500 Subject: ppc: Remove MPC8308RDB board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Ilya Yanok Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc83xx/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index f34acf7..4b4fae4 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -28,11 +28,6 @@ config TARGET_CADDY2 bool "Support caddy2" select ARCH_MPC8349 -config TARGET_MPC8308RDB - bool "Support MPC8308RDB" - select ARCH_MPC8308 - select SYS_FSL_ERRATUM_ESDHC111 - config TARGET_MPC8313ERDB_NOR bool "Support MPC8313ERDB_NOR" select ARCH_MPC8313 @@ -325,7 +320,6 @@ config FSL_ELBC bool source "board/esd/vme8349/Kconfig" -source "board/freescale/mpc8308rdb/Kconfig" source "board/freescale/mpc8313erdb/Kconfig" source "board/freescale/mpc8315erdb/Kconfig" source "board/freescale/mpc8323erdb/Kconfig" -- cgit v1.1 From ce4ca2b7399f11b45ca3f8e1e856e5fa23c6f290 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:23 -0500 Subject: ppc: Remove gdsys strider boards These boards have not been converted to CONFIG_DM_MMC, along with other DM conversions, by the deadline. Remove them. Cc: Dirk Eibach Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc83xx/Kconfig | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 4b4fae4..d25fbf8 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -137,12 +137,6 @@ config TARGET_HRCON select ARCH_MPC8308 select SYS_FSL_ERRATUM_ESDHC111 -config TARGET_STRIDER - bool "Support strider" - select ARCH_MPC8308 - select SYS_FSL_ERRATUM_ESDHC111 - imply CMD_PCA953X - config TARGET_GAZERBEAM bool "Support gazerbeam" select ARCH_MPC8308 -- cgit v1.1 From 7c964c3b93671dbc27eebc876ec592db7ac88ec6 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:24 -0500 Subject: ppc: Remove gdsys hrcon boards These boards have not been converted to CONFIG_DM_MMC, along with other DM conversions, by the deadline. Remove them. Cc: Dirk Eibach Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc83xx/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index d25fbf8..7b64cef 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -132,10 +132,6 @@ config TARGET_TQM834X bool "Support TQM834x" select ARCH_MPC8349 -config TARGET_HRCON - bool "Support hrcon" - select ARCH_MPC8308 - select SYS_FSL_ERRATUM_ESDHC111 config TARGET_GAZERBEAM bool "Support gazerbeam" -- cgit v1.1 From a84ea228bcedfd169fe3f6a59abf0f76ab1eae57 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:25 -0500 Subject: ppc: Remove controlcenterd boards These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. Cc: Mario Six Cc: Dirk Eibach Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc85xx/Kconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index f7679f7..090840e 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -226,10 +226,6 @@ config TARGET_T4240RDB imply CMD_SATA imply PANIC_HANG -config TARGET_CONTROLCENTERD - bool "Support controlcenterd" - select ARCH_P1022 - config TARGET_KMP204X bool "Support kmp204x" select VENDOR_KM @@ -1395,7 +1391,6 @@ source "board/freescale/t104xrdb/Kconfig" source "board/freescale/t208xqds/Kconfig" source "board/freescale/t208xrdb/Kconfig" source "board/freescale/t4rdb/Kconfig" -source "board/gdsys/p1022/Kconfig" source "board/keymile/Kconfig" source "board/sbc8548/Kconfig" source "board/socrates/Kconfig" -- cgit v1.1 From 3238d9340e1eafd261d075fcde17bb7bfe269e7c Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:26 -0500 Subject: ppc: Remove ARCH_P1022 support With the last of the ARCH_P1022 platforms removed, finish removing the rest of the platform support. Cc: Priyanka Jain Signed-off-by: Tom Rini Reviewed-by: Priyanka Jain --- arch/powerpc/cpu/mpc85xx/Kconfig | 21 ----- arch/powerpc/cpu/mpc85xx/Makefile | 1 - arch/powerpc/cpu/mpc85xx/p1022_serdes.c | 129 ------------------------------ arch/powerpc/cpu/mpc85xx/speed.c | 3 +- arch/powerpc/include/asm/config_mpc85xx.h | 4 - arch/powerpc/include/asm/immap_85xx.h | 15 +--- 6 files changed, 2 insertions(+), 171 deletions(-) delete mode 100644 arch/powerpc/cpu/mpc85xx/p1022_serdes.c (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 090840e..4f6915e 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -564,23 +564,6 @@ config ARCH_P1021 imply CMD_REGINFO imply SATA_SIL -config ARCH_P1022 - bool - select FSL_LAW - select SYS_FSL_ERRATUM_A004477 - select SYS_FSL_ERRATUM_A004508 - select SYS_FSL_ERRATUM_A005125 - select SYS_FSL_ERRATUM_ELBC_A001 - select SYS_FSL_ERRATUM_ESDHC111 - select SYS_FSL_ERRATUM_SATA_A001 - select FSL_PCIE_RESET - select SYS_FSL_HAS_DDR3 - select SYS_FSL_HAS_SEC - select SYS_FSL_SEC_BE - select SYS_FSL_SEC_COMPAT_2 - select SYS_PPC_E500_USE_DEBUG_TLB - select FSL_ELBC - config ARCH_P1023 bool select FSL_LAW @@ -1023,7 +1006,6 @@ config MAX_CPUS ARCH_MPC8572 || \ ARCH_P1020 || \ ARCH_P1021 || \ - ARCH_P1022 || \ ARCH_P1023 || \ ARCH_P1024 || \ ARCH_P1025 || \ @@ -1057,7 +1039,6 @@ config SYS_CCSRBAR_DEFAULT ARCH_P1011 || \ ARCH_P1020 || \ ARCH_P1021 || \ - ARCH_P1022 || \ ARCH_P1024 || \ ARCH_P1025 || \ ARCH_P2020 @@ -1275,7 +1256,6 @@ config SYS_FSL_NUM_LAWS ARCH_P1011 || \ ARCH_P1020 || \ ARCH_P1021 || \ - ARCH_P1022 || \ ARCH_P1023 || \ ARCH_P1024 || \ ARCH_P1025 || \ @@ -1325,7 +1305,6 @@ config SYS_PPC_E500_DEBUG_TLB ARCH_P1011 || \ ARCH_P1020 || \ ARCH_P1021 || \ - ARCH_P1022 || \ ARCH_P1024 || \ ARCH_P1025 || \ ARCH_P2020 diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 30dd1b4..ed13d5c 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -69,7 +69,6 @@ obj-$(CONFIG_ARCH_P1010) += p1010_serdes.o obj-$(CONFIG_ARCH_P1011) += p1021_serdes.o obj-$(CONFIG_ARCH_P1020) += p1021_serdes.o obj-$(CONFIG_ARCH_P1021) += p1021_serdes.o -obj-$(CONFIG_ARCH_P1022) += p1022_serdes.o obj-$(CONFIG_ARCH_P1023) += p1023_serdes.o obj-$(CONFIG_ARCH_P1024) += p1021_serdes.o obj-$(CONFIG_ARCH_P1025) += p1021_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c deleted file mode 100644 index 719cb4f..0000000 --- a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c +++ /dev/null @@ -1,129 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - * Author: Timur Tabi - */ - -#include -#include -#include -#include -#include -#include - -#define SRDS1_MAX_LANES 4 -#define SRDS2_MAX_LANES 2 - -static u32 serdes1_prtcl_map, serdes2_prtcl_map; - -static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { - [0x00] = {NONE, NONE, NONE, NONE}, - [0x01] = {NONE, NONE, NONE, NONE}, - [0x02] = {NONE, NONE, NONE, NONE}, - [0x03] = {NONE, NONE, NONE, NONE}, - [0x04] = {NONE, NONE, NONE, NONE}, - [0x06] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2}, - [0x07] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2}, - [0x09] = {PCIE1, NONE, NONE, NONE}, - [0x0a] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2}, - [0x0b] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2}, - [0x0d] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, - [0x0e] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, - [0x0f] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, - [0x15] = {PCIE1, PCIE3, PCIE2, PCIE2}, - [0x16] = {PCIE1, PCIE3, PCIE2, PCIE2}, - [0x17] = {PCIE1, PCIE3, PCIE2, PCIE2}, - [0x18] = {PCIE1, PCIE1, PCIE2, PCIE2}, - [0x19] = {PCIE1, PCIE1, PCIE2, PCIE2}, - [0x1a] = {PCIE1, PCIE1, PCIE2, PCIE2}, - [0x1b] = {PCIE1, PCIE1, PCIE2, PCIE2}, - [0x1c] = {PCIE1, PCIE1, PCIE1, PCIE1}, - [0x1d] = {PCIE1, PCIE1, PCIE2, PCIE2}, - [0x1e] = {PCIE1, PCIE1, PCIE2, PCIE2}, - [0x1f] = {PCIE1, PCIE1, PCIE2, PCIE2}, -}; - -static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { - [0x00] = {PCIE3, PCIE3}, - [0x01] = {PCIE2, PCIE3}, - [0x02] = {SATA1, SATA2}, - [0x03] = {SGMII_TSEC1, SGMII_TSEC2}, - [0x04] = {NONE, NONE}, - [0x06] = {SATA1, SATA2}, - [0x07] = {NONE, NONE}, - [0x09] = {PCIE3, PCIE2}, - [0x0a] = {SATA1, SATA2}, - [0x0b] = {NONE, NONE}, - [0x0d] = {PCIE3, PCIE2}, - [0x0e] = {SATA1, SATA2}, - [0x0f] = {NONE, NONE}, - [0x15] = {SGMII_TSEC1, SGMII_TSEC2}, - [0x16] = {SATA1, SATA2}, - [0x17] = {NONE, NONE}, - [0x18] = {PCIE3, PCIE3}, - [0x19] = {SGMII_TSEC1, SGMII_TSEC2}, - [0x1a] = {SATA1, SATA2}, - [0x1b] = {NONE, NONE}, - [0x1c] = {PCIE3, PCIE3}, - [0x1d] = {SGMII_TSEC1, SGMII_TSEC2}, - [0x1e] = {SATA1, SATA2}, - [0x1f] = {NONE, NONE}, -}; - -int is_serdes_configured(enum srds_prtcl device) -{ - int ret; - - if (!(serdes1_prtcl_map & (1 << NONE))) - fsl_serdes_init(); - - ret = (1 << device) & serdes1_prtcl_map; - - if (ret) - return ret; - - if (!(serdes2_prtcl_map & (1 << NONE))) - fsl_serdes_init(); - - return (1 << device) & serdes2_prtcl_map; -} - -void fsl_serdes_init(void) -{ - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - u32 pordevsr = in_be32(&gur->pordevsr); - u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; - int lane; - - if (serdes1_prtcl_map & (1 << NONE) && - serdes2_prtcl_map & (1 << NONE)) - return; - - debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); - - if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) { - printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); - return; - } - for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { - enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; - serdes1_prtcl_map |= (1 << lane_prtcl); - } - - /* Set the first bit to indicate serdes has been initialized */ - serdes1_prtcl_map |= (1 << NONE); - - if (srds_cfg >= ARRAY_SIZE(serdes2_cfg_tbl)) { - printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); - return; - } - - for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { - enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane]; - serdes2_prtcl_map |= (1 << lane_prtcl); - } - - /* Set the first bit to indicate serdes has been initialized */ - serdes2_prtcl_map |= (1 << NONE); -} diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 59a007b..864c53c 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -608,8 +608,7 @@ int get_clocks(void) * AN2919. */ #if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8541) || \ - defined(CONFIG_ARCH_MPC8560) || defined(CONFIG_ARCH_MPC8555) || \ - defined(CONFIG_ARCH_P1022) + defined(CONFIG_ARCH_MPC8560) || defined(CONFIG_ARCH_MPC8555) gd->arch.i2c1_clk = sys_info.freq_systembus; #elif defined(CONFIG_ARCH_MPC8544) /* diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index f7ab5e3..8487d1a 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -66,10 +66,6 @@ #define QE_NUM_OF_SNUM 28 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#elif defined(CONFIG_ARCH_P1022) -#define CONFIG_TSECV2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 - #elif defined(CONFIG_ARCH_P1023) #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 2 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 3fc56ef..4549d04 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2157,10 +2157,7 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000 #define MPC85xx_PORDEVSR_PCI1 0x00800000 -#if defined(CONFIG_ARCH_P1022) -#define MPC85xx_PORDEVSR_IO_SEL 0x007c0000 -#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 18 -#elif defined(CONFIG_ARCH_P1023) +#if defined(CONFIG_ARCH_P1023) #define MPC85xx_PORDEVSR_IO_SEL 0x00600000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else @@ -2278,12 +2275,6 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR_QE11 0x00000010 #define MPC85xx_PMUXCR_QE12 0x00000008 #endif -#if defined(CONFIG_ARCH_P1022) -#define MPC85xx_PMUXCR_TDM_MASK 0x0001cc00 -#define MPC85xx_PMUXCR_TDM 0x00014800 -#define MPC85xx_PMUXCR_SPI_MASK 0x00600000 -#define MPC85xx_PMUXCR_SPI 0x00000000 -#endif #if defined(CONFIG_ARCH_BSC9131) #define MPC85xx_PMUXCR_TSEC2_DMA_GPIO_IRQ 0x40000000 #define MPC85xx_PMUXCR_TSEC2_USB 0xC0000000 @@ -2363,10 +2354,6 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR2_DEBUG_MUX_SEL_USBPHY 0x00002000 #define MPC85xx_PMUXCR2_PLL_LKDT_EXPOSE 0x00001000 #endif -#if defined(CONFIG_ARCH_P1022) -#define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f8000 -#define MPC85xx_PMUXCR2_USB 0x00150000 -#endif #if defined(CONFIG_ARCH_BSC9131) || defined(CONFIG_ARCH_BSC9132) #if defined(CONFIG_ARCH_BSC9131) #define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD 0X40000000 -- cgit v1.1 From a99dab1d335f6dbaac7ac2cffba9b22a41c97dad Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 20 Feb 2021 20:06:30 -0500 Subject: ppc: Remove Cyrus_P5020 and P5040 boards These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. As the P5020 is the last ARCH_P5020 platform, remove that support as well. Cc: Andy Fleming Cc: Priyanka Jain Signed-off-by: Tom Rini Reviewed-by: Priyanka Jain --- arch/powerpc/cpu/mpc85xx/Kconfig | 44 +--------- arch/powerpc/cpu/mpc85xx/Makefile | 2 - arch/powerpc/cpu/mpc85xx/p5020_ids.c | 124 -------------------------- arch/powerpc/cpu/mpc85xx/p5020_serdes.c | 134 ----------------------------- arch/powerpc/include/asm/config_mpc85xx.h | 18 ---- arch/powerpc/include/asm/fsl_secure_boot.h | 1 - arch/powerpc/include/asm/immap_85xx.h | 2 +- 7 files changed, 2 insertions(+), 323 deletions(-) delete mode 100644 arch/powerpc/cpu/mpc85xx/p5020_ids.c delete mode 100644 arch/powerpc/cpu/mpc85xx/p5020_serdes.c (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 4f6915e..06a20c8 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -254,18 +254,6 @@ config TARGET_UCP1020 imply CMD_SATA imply PANIC_HANG -config TARGET_CYRUS_P5020 - bool "Support Varisys Cyrus P5020" - select ARCH_P5020 - select PHYS_64BIT - imply PANIC_HANG - -config TARGET_CYRUS_P5040 - bool "Support Varisys Cyrus P5040" - select ARCH_P5040 - select PHYS_64BIT - imply PANIC_HANG - endchoice config ARCH_B4420 @@ -727,31 +715,6 @@ config ARCH_P4080 imply CMD_REGINFO imply SATA_SIL -config ARCH_P5020 - bool - select E500MC - select FSL_LAW - select SYS_FSL_DDR_VER_44 - select SYS_FSL_ERRATUM_A004510 - select SYS_FSL_ERRATUM_A005275 - select SYS_FSL_ERRATUM_A006261 - select SYS_FSL_ERRATUM_DDR_A003 - select SYS_FSL_ERRATUM_DDR_A003474 - select SYS_FSL_ERRATUM_ESDHC111 - select SYS_FSL_ERRATUM_I2C_A004447 - select SYS_FSL_ERRATUM_SRIO_A004034 - select SYS_FSL_ERRATUM_USB14 - select SYS_FSL_HAS_DDR3 - select SYS_FSL_HAS_SEC - select SYS_FSL_QORIQ_CHASSIS1 - select SYS_FSL_SEC_BE - select SYS_FSL_SEC_COMPAT_4 - select SYS_PPC64 - select FSL_ELBC - imply CMD_SATA - imply CMD_REGINFO - imply FSL_SATA - config ARCH_P5040 bool select E500MC @@ -1010,7 +973,6 @@ config MAX_CPUS ARCH_P1024 || \ ARCH_P1025 || \ ARCH_P2020 || \ - ARCH_P5020 || \ ARCH_T1023 || \ ARCH_T1024 default 1 @@ -1048,7 +1010,6 @@ config SYS_CCSRBAR_DEFAULT ARCH_P2041 || \ ARCH_P3041 || \ ARCH_P4080 || \ - ARCH_P5020 || \ ARCH_P5040 || \ ARCH_T1023 || \ ARCH_T1024 || \ @@ -1168,7 +1129,7 @@ config SYS_FSL_A004447_SVR_REV default 0x00 if ARCH_MPC8548 default 0x10 if ARCH_P1010 default 0x11 if ARCH_P1023 || ARCH_P2041 || ARCH_BSC9132 - default 0x20 if ARCH_P3041 || ARCH_P4080 || ARCH_P5020 + default 0x20 if ARCH_P3041 || ARCH_P4080 config SYS_FSL_ERRATUM_IFC_A002769 bool @@ -1238,7 +1199,6 @@ config SYS_FSL_NUM_LAWS ARCH_P2041 || \ ARCH_P3041 || \ ARCH_P4080 || \ - ARCH_P5020 || \ ARCH_P5040 || \ ARCH_T2080 || \ ARCH_T4160 || \ @@ -1345,7 +1305,6 @@ config SYS_FSL_LBC_CLK_DIV default 2 if ARCH_P2041 || \ ARCH_P3041 || \ ARCH_P4080 || \ - ARCH_P5020 || \ ARCH_P5040 default 1 @@ -1373,7 +1332,6 @@ source "board/freescale/t4rdb/Kconfig" source "board/keymile/Kconfig" source "board/sbc8548/Kconfig" source "board/socrates/Kconfig" -source "board/varisys/cyrus/Kconfig" source "board/xes/xpedite520x/Kconfig" source "board/xes/xpedite537x/Kconfig" source "board/xes/xpedite550x/Kconfig" diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index ed13d5c..b9d87dd 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -40,7 +40,6 @@ obj-$(CONFIG_SYS_DPAA_QBMAN) += portals.o obj-$(CONFIG_ARCH_P2041) += p2041_ids.o obj-$(CONFIG_ARCH_P3041) += p3041_ids.o obj-$(CONFIG_ARCH_P4080) += p4080_ids.o -obj-$(CONFIG_ARCH_P5020) += p5020_ids.o obj-$(CONFIG_ARCH_P5040) += p5040_ids.o obj-$(CONFIG_ARCH_T4240) += t4240_ids.o obj-$(CONFIG_ARCH_T4160) += t4240_ids.o @@ -76,7 +75,6 @@ obj-$(CONFIG_ARCH_P2020) += p2020_serdes.o obj-$(CONFIG_ARCH_P2041) += p2041_serdes.o obj-$(CONFIG_ARCH_P3041) += p3041_serdes.o obj-$(CONFIG_ARCH_P4080) += p4080_serdes.o -obj-$(CONFIG_ARCH_P5020) += p5020_serdes.o obj-$(CONFIG_ARCH_P5040) += p5040_serdes.o obj-$(CONFIG_ARCH_T4240) += t4240_serdes.o obj-$(CONFIG_ARCH_T4160) += t4240_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c deleted file mode 100644 index 575b604..0000000 --- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include - -#ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { - /* dqrr liodn, frame data liodn, liodn off, sdest */ - SET_QP_INFO(1, 2, 1, 0), - SET_QP_INFO(3, 4, 2, 1), - SET_QP_INFO(5, 6, 3, 0), - SET_QP_INFO(7, 8, 4, 1), - SET_QP_INFO(9, 10, 5, 0), - SET_QP_INFO(11, 12, 6, 1), - SET_QP_INFO(13, 14, 7, 0), - SET_QP_INFO(15, 16, 8, 1), - SET_QP_INFO(17, 18, 9, 0), - SET_QP_INFO(19, 20, 10, 1), -}; -#endif - -struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_2(1, 199, 200), - SET_SRIO_LIODN_2(2, 201, 202), -}; -int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); - -struct liodn_id_table liodn_tbl[] = { -#ifdef CONFIG_SYS_DPAA_QBMAN - SET_QMAN_LIODN(31), - SET_BMAN_LIODN(32), -#endif - - SET_SDHC_LIODN(1, 64), - - SET_PME_LIODN(117), - - SET_USB_LIODN(1, "fsl-usb2-mph", 125), - SET_USB_LIODN(2, "fsl-usb2-dr", 126), - - SET_SATA_LIODN(1, 127), - SET_SATA_LIODN(2, 128), - - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 193), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 194), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 196), - - SET_DMA_LIODN(1, "fsl,eloplus-dma", 197), - SET_DMA_LIODN(2, "fsl,eloplus-dma", 198), - - SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), - SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), - SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), - SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), -}; -int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); - -#ifdef CONFIG_SYS_DPAA_FMAN -struct fman_liodn_id_table fman1_liodn_tbl[] = { - SET_FMAN_RX_1G_LIODN(1, 0, 10), - SET_FMAN_RX_1G_LIODN(1, 1, 11), - SET_FMAN_RX_1G_LIODN(1, 2, 12), - SET_FMAN_RX_1G_LIODN(1, 3, 13), - SET_FMAN_RX_1G_LIODN(1, 4, 14), - SET_FMAN_RX_10G_LIODN(1, 0, 15), -}; -int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); -#endif - -struct liodn_id_table sec_liodn_tbl[] = { - SET_SEC_JR_LIODN_ENTRY(0, 129, 130), - SET_SEC_JR_LIODN_ENTRY(1, 131, 132), - SET_SEC_JR_LIODN_ENTRY(2, 133, 134), - SET_SEC_JR_LIODN_ENTRY(3, 135, 136), - SET_SEC_RTIC_LIODN_ENTRY(a, 154), - SET_SEC_RTIC_LIODN_ENTRY(b, 155), - SET_SEC_RTIC_LIODN_ENTRY(c, 156), - SET_SEC_RTIC_LIODN_ENTRY(d, 157), - SET_SEC_DECO_LIODN_ENTRY(0, 97, 98), - SET_SEC_DECO_LIODN_ENTRY(1, 99, 100), -}; -int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); - -#ifdef CONFIG_SYS_FSL_RAID_ENGINE -struct liodn_id_table raide_liodn_tbl[] = { - SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60), - SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61), - SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62), - SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63), -}; -int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl); -#endif - -#ifdef CONFIG_SYS_DPAA_RMAN -struct liodn_id_table rman_liodn_tbl[] = { - /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 6), - SET_RMAN_LIODN(1, 7), - SET_RMAN_LIODN(2, 8), - SET_RMAN_LIODN(3, 9), -}; -int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); -#endif - -struct liodn_id_table liodn_bases[] = { - [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 100), -#ifdef CONFIG_SYS_DPAA_FMAN - [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32), -#endif -#ifdef CONFIG_SYS_DPAA_PME - [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(136, 172), -#endif -#ifdef CONFIG_SYS_FSL_RAID_ENGINE - [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(47), -#endif -#ifdef CONFIG_SYS_DPAA_RMAN - [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(80), -#endif -}; diff --git a/arch/powerpc/cpu/mpc85xx/p5020_serdes.c b/arch/powerpc/cpu/mpc85xx/p5020_serdes.c deleted file mode 100644 index ec8234c..0000000 --- a/arch/powerpc/cpu/mpc85xx/p5020_serdes.c +++ /dev/null @@ -1,134 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include "fsl_corenet_serdes.h" - -static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { - [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - PCIE4, AURORA, PCIE3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x4] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - PCIE2, AURORA, PCIE3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, }, - [0xb] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO2, SRIO2, SRIO1, SRIO1, - PCIE2, AURORA, PCIE3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x10] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x13] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM1, XAUI_FM1, - XAUI_FM1, XAUI_FM1, }, - [0x14] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, PCIE3, PCIE3, PCIE3, PCIE3, - SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, }, - [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x16] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SRIO1, SRIO1, SRIO1, - SRIO1, }, - [0x17] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x18] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, NONE, - NONE, NONE, }, - [0x1b] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x1d] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, PCIE3, PCIE3, PCIE3, PCIE3, NONE, NONE, - SATA1, SATA2, }, - [0x20] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM1, XAUI_FM1, - XAUI_FM1, XAUI_FM1, }, - [0x21] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, PCIE3, PCIE3, PCIE3, PCIE3, - SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, - SGMII_FM1_DTSEC4, }, - [0x22] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x23] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO2, SRIO2, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x24] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO2, SRIO2, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, NONE, - NONE, NONE, }, - [0x28] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, }, - [0x29] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, NONE, - NONE, NONE, }, - [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM1, XAUI_FM1, - XAUI_FM1, XAUI_FM1, }, - [0x2b] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x2f] = {PCIE1, PCIE1, PCIE3, PCIE3, SRIO2, SRIO2, SRIO1, SRIO1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x31] = {PCIE1, PCIE1, PCIE3, PCIE3, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, NONE, - NONE, NONE, }, - [0x33] = {PCIE1, PCIE1, PCIE3, PCIE3, SRIO1, SRIO1, SRIO1, SRIO1, - AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, - NONE, NONE, SATA1, SATA2, }, - [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1, - SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, - AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, - NONE, SATA1, SATA2, }, - [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1, - XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2, }, - [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1, - SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, - AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, - NONE, SATA1, SATA2, }, - [0x37] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, - SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1, - XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2, }, -}; - -enum srds_prtcl serdes_get_prtcl(int cfg, int lane) -{ - if (!serdes_lane_enabled(lane)) - return NONE; - - return serdes_cfg_tbl[cfg][lane]; -} - -int is_serdes_prtcl_valid(u32 prtcl) { - int i; - - if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl)) - return 0; - - for (i = 0; i < SRDS_MAX_LANES; i++) { - if (serdes_cfg_tbl[prtcl][i] != NONE) - return 1; - } - - return 0; -} diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 8487d1a..2053548 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -153,24 +153,6 @@ #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000 -#elif defined(CONFIG_ARCH_P5020) /* also supports P5010 */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ -#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 -#define CONFIG_SYS_NUM_FMAN 1 -#define CONFIG_SYS_NUM_FM1_DTSEC 5 -#define CONFIG_SYS_NUM_FM1_10GEC 1 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 -#define CONFIG_SYS_FSL_TBCLK_DIV 32 -#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE -#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 -#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 -#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000 - #elif defined(CONFIG_ARCH_P5040) #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 25db9f2..6499e10 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -57,7 +57,6 @@ #if defined(CONFIG_ARCH_P3041) || \ defined(CONFIG_ARCH_P4080) || \ - defined(CONFIG_ARCH_P5020) || \ defined(CONFIG_ARCH_P5040) || \ defined(CONFIG_ARCH_P2041) #define CONFIG_FSL_TRUST_ARCH_v1 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 4549d04..59bc32f 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1853,7 +1853,7 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR11_EC2_USB2 0x00100000 #endif #if defined(CONFIG_ARCH_P2041) || \ - defined(CONFIG_ARCH_P3041) || defined(CONFIG_ARCH_P5020) + defined(CONFIG_ARCH_P3041) #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_RGMII 0x00000000 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_MII 0x00800000 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_NONE 0x00c00000 -- cgit v1.1 From d3cfc474b764fc9d8fca6dc1dfe56f42e564f0f5 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Sat, 10 Apr 2021 10:58:56 -0400 Subject: ppc: Remove MPC837XEMDS board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Priyanka Jain Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc83xx/Kconfig | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 7b64cef..ff85834 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -70,13 +70,6 @@ config TARGET_MPC8349EMDS_SDRAM select SYS_FSL_DDR_BE select SYS_FSL_HAS_DDR2 -config TARGET_MPC837XEMDS - bool "Support MPC837XEMDS" - select ARCH_MPC837X - select BOARD_EARLY_INIT_F - imply CMD_SATA - imply FSL_SATA - config TARGET_MPC837XERDB bool "Support MPC837XERDB" select ARCH_MPC837X @@ -315,7 +308,6 @@ source "board/freescale/mpc8315erdb/Kconfig" source "board/freescale/mpc8323erdb/Kconfig" source "board/freescale/mpc832xemds/Kconfig" source "board/freescale/mpc8349emds/Kconfig" -source "board/freescale/mpc837xemds/Kconfig" source "board/freescale/mpc837xerdb/Kconfig" source "board/ids/ids8313/Kconfig" source "board/keymile/Kconfig" -- cgit v1.1