From f4686c3d5b96dfdc5d6687845f1c7505fa26bca8 Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Fri, 23 Apr 2021 11:27:37 -0500 Subject: arm: mach-k3: am642: Use mmc start and stop callbacks To avoid any glitches on MMC clock line, make use of pm per and post callbacks when loading sysfw. Signed-off-by: Dave Gerlach --- arch/arm/mach-k3/am642_init.c | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-k3') diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c index b2c3774..d09fc59 100644 --- a/arch/arm/mach-k3/am642_init.c +++ b/arch/arm/mach-k3/am642_init.c @@ -19,6 +19,7 @@ #include #include #include +#include #if defined(CONFIG_SPL_BUILD) @@ -51,6 +52,36 @@ static void store_boot_info_from_rom(void) sizeof(struct rom_extended_boot_data)); } +#if defined(CONFIG_K3_LOAD_SYSFW) && CONFIG_IS_ENABLED(DM_MMC) +void k3_mmc_stop_clock(void) +{ + if (spl_boot_device() == BOOT_DEVICE_MMC1) { + struct mmc *mmc = find_mmc_device(0); + + if (!mmc) + return; + + mmc->saved_clock = mmc->clock; + mmc_set_clock(mmc, 0, true); + } +} + +void k3_mmc_restart_clock(void) +{ + if (spl_boot_device() == BOOT_DEVICE_MMC1) { + struct mmc *mmc = find_mmc_device(0); + + if (!mmc) + return; + + mmc_set_clock(mmc, mmc->saved_clock, false); + } +} +#else +void k3_mmc_stop_clock(void) {} +void k3_mmc_restart_clock(void) {} +#endif + void board_init_f(ulong dummy) { #if defined(CONFIG_K3_LOAD_SYSFW) @@ -94,7 +125,8 @@ void board_init_f(ulong dummy) * system firmware and if so, will only perform needed config * and not attempt to load firmware again. */ - k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata), NULL, NULL); + k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata), k3_mmc_stop_clock, + k3_mmc_restart_clock); #endif /* Output System Firmware version info */ -- cgit v1.1