From 3f20321ad8bdd7e84c3cfd2592b16ff65d05d04c Mon Sep 17 00:00:00 2001 From: Thomas Fitzsimmons Date: Wed, 22 Aug 2018 18:37:55 -0400 Subject: board: arm: Add support for Broadcom BCM7260 Add support for loading U-Boot on the Broadcom 7260 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons Reviewed-by: Florian Fainelli Cc: Florian Fainelli --- arch/arm/mach-bcmstb/Kconfig | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'arch/arm/mach-bcmstb') diff --git a/arch/arm/mach-bcmstb/Kconfig b/arch/arm/mach-bcmstb/Kconfig index 6c7952f..0a56c3c 100644 --- a/arch/arm/mach-bcmstb/Kconfig +++ b/arch/arm/mach-bcmstb/Kconfig @@ -7,8 +7,14 @@ config TARGET_BCM7445 Support for the Broadcom 7445 SoC. This port assumes BOLT is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader (TSBL), loaded by BOLT. - This port may work on other BCM7xxx boards with - configuration changes. + +config TARGET_BCM7260 + bool "Broadcom 7260 TSBL" + depends on ARCH_BCMSTB + help + Support for the Broadcom 7260 SoC. This port assumes BOLT + is acting as the second stage bootloader, and U-Boot is + acting as the third stage bootloader (TSBL), loaded by BOLT. config SYS_CPU default "armv7" @@ -23,7 +29,8 @@ config SYS_SOC default "bcmstb" config SYS_CONFIG_NAME - default "bcm7445" + default "bcm7445" if TARGET_BCM7445 + default "bcm7260" if TARGET_BCM7260 config SYS_FDT_SAVE_ADDRESS hex "Address to which the prior stage provided DTB will be copied" -- cgit v1.1