From 5da627a424b3ad2d38a81886ba4a18e5123a6788 Mon Sep 17 00:00:00 2001 From: wdenk Date: Thu, 9 Oct 2003 20:09:04 +0000 Subject: * Patch by Steven Scholz, 10 Oct 2003 - Add support for Altera FPGA ACEX1K * Patches by Thomas Lange, 09 Oct 2003: - Endian swap ATA identity for all big endian CPUs, not just PPC - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize args to linux - add support for dbau1x00 board (MIPS32) --- README | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'README') diff --git a/README b/README index 131d10f..617abb4 100644 --- a/README +++ b/README @@ -398,15 +398,16 @@ The following options need to be configured: - MPC824X Family Member (if CONFIG_MPC824X is defined) - Define exactly one of - CONFIG_MPC8240, CONFIG_MPC8245 + Define exactly one of + CONFIG_MPC8240, CONFIG_MPC8245 - 8xx CPU Options: (if using an 8xx cpu) Define one or more of - CONFIG_8xx_GCLK_FREQ - if get_gclk_freq() can not work e.g. - no 32KHz reference PIT/RTC clock + CONFIG_8xx_GCLK_FREQ - if get_gclk_freq() cannot work + e.g. if there is no 32KHz + reference PIT/RTC clock -- Clock Interface: +- Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ U-Boot stores all clock information in Hz @@ -416,11 +417,16 @@ The following options need to be configured: "clocks_in_mhz" can be defined so that U-Boot converts clock data to MHZ before passing it to the Linux kernel. - When CONFIG_CLOCKS_IN_MHZ is defined, a definition of "clocks_in_mhz=1" is automatically included in the default environment. + CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] + + When transfering memsize parameter to linux, some versions + expect it to be in bytes, others in MB. + Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. + - Console Interface: Depending on board, define exactly one serial port (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, -- cgit v1.1