From f4db6c976cf8f414c555ccbd355de787b2706be3 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 7 Jan 2016 14:12:04 +0100 Subject: arm: mvebu: Add runtime detection of UART (xmodem) boot-mode This patch adds runtime detection of the Marvell UART boot-mode (xmodem protocol). If this boot-mode is detected, SPL will return to the BootROM to continue the UART booting. With this patch its now possible, to generate a U-Boot image that can be booted either from the strapped boot-device (e.g. SPI NOR, MMC, etc) or via the xmodem protocol from the UART. In the UART case, the kwboot tool will dynamically insert the UART boot-device type into the image. And also patch the load address in the header, so that the mkimage header will be skipped (as its not expected by the Marvell BootROM). This simplifies the development for Armada XP / 38x based boards. As no special images need to be generated by selecting the MVEBU_BOOTROM_UARTBOOT Kconfig option. Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any more, its now completely removed. Signed-off-by: Stefan Roese Cc: Luka Perkov Cc: Dirk Eibach Cc: Phil Sutter Cc: Kevin Smith --- Makefile | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 100de92..5882c30 100644 --- a/Makefile +++ b/Makefile @@ -915,18 +915,8 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE $(call if_changed,mkimage) -# If the kwboot xmodem protocol is used, to boot U-Boot on the MVEBU -# SoC's, the SPL U-Boot returns to the BootROM after it completes -# the SDRAM setup. The BootROM expects no U-Boot header in the main -# U-Boot image. So we need to combine SPL and u-boot.bin instead of -# u-boot.img in this case. -ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT -u-boot-spl.kwb: u-boot-dtb.bin spl/u-boot-spl.bin FORCE - $(call if_changed,mkimage) -else u-boot-spl.kwb: u-boot-dtb.img spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) -endif MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) -- cgit v1.1