From d718bf2c9e4970745e2acaf88d1cf3192eec2bd8 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 21 Dec 2015 12:36:40 +0100 Subject: arm: mvebu: Print CPU and SDRAM frequency upon startup With this patch, the CPU and the DDR frequencies will get printed in the U-Boot startup messages. Resulting in such a log: U-Boot 2016.01-rc2-00188-gb8eeaec-dirty (Dec 21 2015 - 12:32:35 +0100) SoC: MV78460-B0 at 1600 MHz I2C: ready DRAM: 4 GiB (800 MHz, ECC not enabled) ... Signed-off-by: Stefan Roese Cc: Luka Perkov --- arch/arm/mach-mvebu/cpu.c | 100 +++++++++++++++++++++++++++++++-- arch/arm/mach-mvebu/dram.c | 11 +++- arch/arm/mach-mvebu/include/mach/cpu.h | 10 ++++ 3 files changed, 113 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index c9b9c77..6ea558c 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -60,10 +60,95 @@ int mvebu_soc_family(void) } #if defined(CONFIG_DISPLAY_CPUINFO) + +#if defined(CONFIG_ARMADA_38X) +/* SAR values for Armada 38x */ +#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18600)) +#define SAR_CPU_FREQ_OFFS 10 +#define SAR_CPU_FREQ_MASK (0x1f << SAR_CPU_FREQ_OFFS) + +struct sar_freq_modes sar_freq_tab[] = { + { 0x0, 0x0, 666, 333, 333 }, + { 0x2, 0x0, 800, 400, 400 }, + { 0x4, 0x0, 1066, 533, 533 }, + { 0x6, 0x0, 1200, 600, 600 }, + { 0x8, 0x0, 1332, 666, 666 }, + { 0xc, 0x0, 1600, 800, 800 }, + { 0xff, 0xff, 0, 0, 0 } /* 0xff marks end of array */ +}; +#else +/* SAR values for Armada XP */ +#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18230)) +#define CONFIG_SAR2_REG (MVEBU_REGISTER(0x18234)) +#define SAR_CPU_FREQ_OFFS 21 +#define SAR_CPU_FREQ_MASK (0x7 << SAR_CPU_FREQ_OFFS) +#define SAR_FFC_FREQ_OFFS 24 +#define SAR_FFC_FREQ_MASK (0xf << SAR_FFC_FREQ_OFFS) +#define SAR2_CPU_FREQ_OFFS 20 +#define SAR2_CPU_FREQ_MASK (0x1 << SAR2_CPU_FREQ_OFFS) + +struct sar_freq_modes sar_freq_tab[] = { + { 0xa, 0x5, 800, 400, 400 }, + { 0x1, 0x5, 1066, 533, 533 }, + { 0x2, 0x5, 1200, 600, 600 }, + { 0x2, 0x9, 1200, 600, 400 }, + { 0x3, 0x5, 1333, 667, 667 }, + { 0x4, 0x5, 1500, 750, 750 }, + { 0x4, 0x9, 1500, 750, 500 }, + { 0xb, 0x9, 1600, 800, 533 }, + { 0xb, 0xa, 1600, 800, 640 }, + { 0xb, 0x5, 1600, 800, 800 }, + { 0xff, 0xff, 0, 0, 0 } /* 0xff marks end of array */ +}; +#endif + +void get_sar_freq(struct sar_freq_modes *sar_freq) +{ + u32 val; + u32 freq; + int i; + + val = readl(CONFIG_SAR_REG); /* SAR - Sample At Reset */ + freq = (val & SAR_CPU_FREQ_MASK) >> SAR_CPU_FREQ_OFFS; +#if !defined(CONFIG_ARMADA_38X) + /* + * Shift CPU0 clock frequency select bit from SAR2 register + * into correct position + */ + freq |= ((readl(CONFIG_SAR2_REG) & SAR2_CPU_FREQ_MASK) + >> SAR2_CPU_FREQ_OFFS) << 3; +#endif + for (i = 0; sar_freq_tab[i].val != 0xff; i++) { + if (sar_freq_tab[i].val == freq) { +#if defined(CONFIG_ARMADA_38X) + *sar_freq = sar_freq_tab[i]; + return; +#else + int k; + u8 ffc; + + ffc = (val & SAR_FFC_FREQ_MASK) >> + SAR_FFC_FREQ_OFFS; + for (k = i; sar_freq_tab[k].ffc != 0xff; k++) { + if (sar_freq_tab[k].ffc == ffc) { + *sar_freq = sar_freq_tab[k]; + return; + } + } + i = k; +#endif + } + } + + /* SAR value not found, return 0 for frequencies */ + *sar_freq = sar_freq_tab[i - 1]; +} + int print_cpuinfo(void) { u16 devid = (readl(MVEBU_REG_PCIE_DEVID) >> 16) & 0xffff; u8 revid = readl(MVEBU_REG_PCIE_REVID) & 0xff; + struct sar_freq_modes sar_freq; puts("SoC: "); @@ -91,13 +176,13 @@ int print_cpuinfo(void) if (mvebu_soc_family() == MVEBU_SOC_AXP) { switch (revid) { case 1: - puts("A0\n"); + puts("A0"); break; case 2: - puts("B0\n"); + puts("B0"); break; default: - printf("?? (%x)\n", revid); + printf("?? (%x)", revid); break; } } @@ -105,17 +190,20 @@ int print_cpuinfo(void) if (mvebu_soc_family() == MVEBU_SOC_A38X) { switch (revid) { case MV_88F68XX_Z1_ID: - puts("Z1\n"); + puts("Z1"); break; case MV_88F68XX_A0_ID: - puts("A0\n"); + puts("A0"); break; default: - printf("?? (%x)\n", revid); + printf("?? (%x)", revid); break; } } + get_sar_freq(&sar_freq); + printf(" at %d MHz\n", sar_freq.p_clk); + return 0; } #endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/mach-mvebu/dram.c b/arch/arm/mach-mvebu/dram.c index ddc5b7e..059151a 100644 --- a/arch/arm/mach-mvebu/dram.c +++ b/arch/arm/mach-mvebu/dram.c @@ -292,11 +292,18 @@ void dram_init_banksize(void) } } +#if defined(CONFIG_ARMADA_XP) void board_add_ram_info(int use_default) { + struct sar_freq_modes sar_freq; + + get_sar_freq(&sar_freq); + printf(" (%d MHz, ", sar_freq.d_clk); + if (ecc_enabled()) - printf(" (ECC"); + printf("ECC"); else - printf(" (ECC not"); + printf("ECC not"); printf(" enabled)"); } +#endif diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index 5e8bf0c..47f45c1 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -106,6 +106,14 @@ struct kwgpio_registers { u32 irq_level; }; +struct sar_freq_modes { + u8 val; + u8 ffc; /* Fabric Frequency Configuration */ + u32 p_clk; + u32 nb_clk; + u32 d_clk; +}; + /* Needed for dynamic (board-specific) mbus configuration */ extern struct mvebu_mbus_state mbus_state; @@ -123,6 +131,8 @@ void return_to_bootrom(void); int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks); +void get_sar_freq(struct sar_freq_modes *sar_freq); + /* * Highspeed SERDES PHY config init, ported from bin_hdr * to mainline U-Boot -- cgit v1.1