From 8717b81aa219b0d568b2c10de436735fc4e2447c Mon Sep 17 00:00:00 2001 From: Jesse Taube Date: Wed, 23 Aug 2023 22:30:52 -0400 Subject: Convert CFG_SYS_UBOOT_START to Kconfig Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE. This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE. Suggested-by: Marek Vasut Suggested-by: Tom Rini Signed-off-by: Jesse Taube --- Makefile | 16 ++++------------ arch/arm/mach-k3/config_secure.mk | 2 +- arch/arm/mach-omap2/config_secure.mk | 2 +- boot/Kconfig | 16 ++++++++++++++++ common/spl/spl.c | 6 +----- common/spl/spl_fit.c | 2 +- configs/imxrt1020-evk_defconfig | 2 ++ configs/imxrt1050-evk_defconfig | 2 ++ configs/imxrt1170-evk_defconfig | 2 ++ include/configs/gardena-smart-gateway-mt7688.h | 4 ---- include/configs/imxrt1020-evk.h | 6 ------ include/configs/imxrt1050-evk.h | 6 ------ include/configs/imxrt1170-evk.h | 3 --- include/configs/linkit-smart-7688.h | 4 ---- include/configs/mt7620.h | 3 --- include/configs/mt7628.h | 3 --- include/configs/mt8512.h | 2 -- include/configs/vocore2.h | 4 ---- include/spl.h | 2 +- 19 files changed, 31 insertions(+), 56 deletions(-) diff --git a/Makefile b/Makefile index 9b90204..13d4c63 100644 --- a/Makefile +++ b/Makefile @@ -1364,14 +1364,6 @@ OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE $(call if_changed,objcopy) -# -# U-Boot entry point, needed for booting of full-blown U-Boot -# from the SPL U-Boot version. -# -ifndef CFG_SYS_UBOOT_START -CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE) -endif - # Boards with more complex image requirements can provide an .its source file # or a generator script # NOTE: Please do not use this. We are migrating away from Makefile rules to use @@ -1391,7 +1383,7 @@ endif ifdef CONFIG_SPL_LOAD_FIT MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ -p $(CONFIG_FIT_EXTERNAL_OFFSET) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \ @@ -1399,10 +1391,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST))) else MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log endif @@ -1433,7 +1425,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ UBOOT_BIN := u-boot.bin MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" u-boot.bin.lzma: u-boot.bin FORCE diff --git a/arch/arm/mach-k3/config_secure.mk b/arch/arm/mach-k3/config_secure.mk index 7bc8af8..9cc1f9e 100644 --- a/arch/arm/mach-k3/config_secure.mk +++ b/arch/arm/mach-k3/config_secure.mk @@ -30,7 +30,7 @@ tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$( $(call if_changed,mkfitimage) MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST))) diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk index 24ddcdb..f76262b 100644 --- a/arch/arm/mach-omap2/config_secure.mk +++ b/arch/arm/mach-omap2/config_secure.mk @@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE ifdef CONFIG_SPL_LOAD_FIT MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST))) diff --git a/boot/Kconfig b/boot/Kconfig index e8fb03b..f785f03 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -738,6 +738,22 @@ config TEXT_BASE default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64 hex "Text Base" help + The address in memory that U-Boot will be copied from, initially. + +config HAVE_SYS_UBOOT_START + bool + depends on HAVE_TEXT_BASE + prompt "Use custom U-Boot Start" + help + By default, the address in memory that U-Boot will be copied from(TEXT_BASE) and the + entry point are the same. Select this to set a different U-Boot start address. + +config SYS_UBOOT_START + hex + depends on HAVE_TEXT_BASE + default TEXT_BASE + prompt "U-Boot entry" if HAVE_SYS_UBOOT_START + help The address in memory that U-Boot will be running from, initially. config HAVE_SYS_MONITOR_BASE diff --git a/common/spl/spl.c b/common/spl/spl.c index 0062f3f..f4b30b3 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -45,10 +45,6 @@ DECLARE_GLOBAL_DATA_PTR; DECLARE_BINMAN_MAGIC_SYM; -#ifndef CFG_SYS_UBOOT_START -#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE -#endif - u32 *boot_params_ptr = NULL; #if CONFIG_IS_ENABLED(BINMAN_UBOOT_SYMBOLS) @@ -252,7 +248,7 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image) spl_image->entry_point = u_boot_pos; spl_image->load_addr = u_boot_pos; } else { - spl_image->entry_point = CFG_SYS_UBOOT_START; + spl_image->entry_point = CONFIG_SYS_UBOOT_START; spl_image->load_addr = CONFIG_TEXT_BASE; } spl_image->os = IH_OS_U_BOOT; diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 730639f..3d39e70 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -816,7 +816,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, } /* - * If a platform does not provide CFG_SYS_UBOOT_START, U-Boot's + * If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's * Makefile will set it to 0 and it will end up as the entry point * here. What it actually means is: use the load address. */ diff --git a/configs/imxrt1020-evk_defconfig b/configs/imxrt1020-evk_defconfig index 40210a5..6b63b80 100644 --- a/configs/imxrt1020-evk_defconfig +++ b/configs/imxrt1020-evk_defconfig @@ -19,6 +19,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_SIZE_LIMIT=0x20000 CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x20209000 +CONFIG_HAVE_SYS_UBOOT_START=y +CONFIG_SYS_UBOOT_START=0x800023FD CONFIG_DISTRO_DEFAULTS=y CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig index 8f7a36f..cbf9469 100644 --- a/configs/imxrt1050-evk_defconfig +++ b/configs/imxrt1050-evk_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_SIZE_LIMIT=0x20000 CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x20209000 +CONFIG_HAVE_SYS_UBOOT_START=y +CONFIG_SYS_UBOOT_START=0x800023FD CONFIG_DISTRO_DEFAULTS=y CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set diff --git a/configs/imxrt1170-evk_defconfig b/configs/imxrt1170-evk_defconfig index 8320c09..83825da 100644 --- a/configs/imxrt1170-evk_defconfig +++ b/configs/imxrt1170-evk_defconfig @@ -21,6 +21,8 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_SIZE_LIMIT=0x20000 CONFIG_SPL=y CONFIG_SYS_LOAD_ADDR=0x202C0000 +CONFIG_HAVE_SYS_UBOOT_START=y +CONFIG_SYS_UBOOT_START=0x202403FD CONFIG_DISTRO_DEFAULTS=y CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index 0ba4efe..1b97ae2 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -11,10 +11,6 @@ #define CFG_SYS_INIT_SP_OFFSET 0x400000 -/* SPL */ - -#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE - /* Dummy value */ #define CFG_SYS_UBOOT_BASE 0 diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h index e180387..cd6af93 100644 --- a/include/configs/imxrt1020-evk.h +++ b/include/configs/imxrt1020-evk.h @@ -18,10 +18,4 @@ #define DMAMEM_BASE (PHYS_SDRAM + PHYS_SDRAM_SIZE - \ DMAMEM_SZ_ALL) -/* - * Configuration of the external SDRAM memory - */ - -#define CFG_SYS_UBOOT_START 0x800023FD - #endif /* __IMXRT1020_EVK_H */ diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index 7688464..2af2dde 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -25,10 +25,4 @@ "stderr=serial,vidconsole\0" #endif -/* - * Configuration of the external SDRAM memory - */ - -#define CFG_SYS_UBOOT_START 0x800023FD - #endif /* __IMXRT1050_EVK_H */ diff --git a/include/configs/imxrt1170-evk.h b/include/configs/imxrt1170-evk.h index f834290..1ccaa15 100644 --- a/include/configs/imxrt1170-evk.h +++ b/include/configs/imxrt1170-evk.h @@ -22,8 +22,5 @@ #define DMAMEM_SZ_ALL (1 * 1024 * 1024) #define DMAMEM_BASE (PHYS_SDRAM + PHYS_SDRAM_SIZE - \ DMAMEM_SZ_ALL) -/* For SPL */ -#define CFG_SYS_UBOOT_START 0x202403FD -/* For SPL ends */ #endif /* __IMXRT1170_EVK_H */ diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index f16c7e9..e8f7a59 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -11,10 +11,6 @@ #define CFG_SYS_INIT_SP_OFFSET 0x400000 -/* SPL */ - -#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE - /* Dummy value */ #define CFG_SYS_UBOOT_BASE 0 diff --git a/include/configs/mt7620.h b/include/configs/mt7620.h index d69d35f..3bc0c18 100644 --- a/include/configs/mt7620.h +++ b/include/configs/mt7620.h @@ -12,9 +12,6 @@ #define CFG_SYS_INIT_SP_OFFSET 0x400000 -/* SPL */ -#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE - /* Dummy value */ #define CFG_SYS_UBOOT_BASE 0 diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h index 0ac376d..1df0681 100644 --- a/include/configs/mt7628.h +++ b/include/configs/mt7628.h @@ -22,9 +22,6 @@ #define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 921600 } -/* SPL */ -#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE - /* Dummy value */ #define CFG_SYS_UBOOT_BASE 0 diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h index c0fc868..4e70291 100644 --- a/include/configs/mt8512.h +++ b/include/configs/mt8512.h @@ -10,8 +10,6 @@ #define __MT8512_H /* Uboot definition */ -#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE - #define ENV_BOOT_READ_IMAGE \ "boot_rd_img=mmc dev 0" \ ";mmc read ${loadaddr} 0x27000 0x8000" \ diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index 43050d6..eb87633 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -11,10 +11,6 @@ #define CFG_SYS_INIT_SP_OFFSET 0x400000 -/* SPL */ - -#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE - /* Dummy value */ #define CFG_SYS_UBOOT_BASE 0 diff --git a/include/spl.h b/include/spl.h index 92bcaa9..57da148 100644 --- a/include/spl.h +++ b/include/spl.h @@ -484,7 +484,7 @@ unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc, * spl_set_header_raw_uboot() - Set up a standard SPL image structure * * This sets up the given spl_image which the standard values obtained from - * config options: CONFIG_SYS_MONITOR_LEN, CFG_SYS_UBOOT_START, + * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START, * CONFIG_TEXT_BASE. * * @spl_image: Image description to set up -- cgit v1.1