From 7f08bfb74f0417c5791787c8adb7c7d2217d8492 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Thu, 14 Nov 2019 11:23:17 +0800 Subject: doc: rockchip: Add documentation for rk3308 based boards Add build documentation for rk3308 based boards. Signed-off-by: Andy Yan Reviewed-by: Kever Yang --- doc/README.rockchip | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 91 insertions(+), 1 deletion(-) diff --git a/doc/README.rockchip b/doc/README.rockchip index d17afea..67c1400 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -47,6 +47,11 @@ Two RK3036 boards are supported: - EVB RK3036 - use evb-rk3036 configuration - Kylin - use kylin_rk3036 configuration +Two RK3308 boards are supported: + + - EVB RK3308 - use evb-rk3308 configuration + - ROC-CC-RK3308 - use roc-rk3308-cc configuration + Two RK3328 board are supported: - EVB RK3328 - use evb-rk3328_defconfig @@ -94,7 +99,20 @@ For example: (or you can use another cross compiler if you prefer) -2. To build RK3399 board: +2. To build RK3308 board: + - Get the rkbin + => git clone https://github.com/rockchip-linux/rkbin.git + + - Compile U-Boot + => cd /path/to/u-boot + => export BL31=/path/to/rkbin/bin/rk33/rk3308_bl31_v2.22.elf + => make roc-rk3308-cc_defconfig + => make CROSS_COMPILE=aarch64-linux-gnu- all + => make CROSS_COMPILE=aarch64-linux-gnu- u-boot.itb + => ./tools/mkimage -n rk3308 -T rksd -d /path/to/rkbin/bin/rk33/rk3308_ddr_589MHz_uart2_m0_v1.26.bin idbloader.img + => cat spl/u-boot-spl.bin >> idbloader.img + +3. To build RK3399 board: Option 1: Package the image with Rockchip miniloader: @@ -203,6 +221,78 @@ as several other platforms do. However it does not seem to be possible to use the existing boot ROM code from SPL. +Writing to the eMMC with USB on ROC-RK3308-CC +============================================= +For USB to work you must get your board into Bootrom mode, +either by erasing the eMMC or short circuit the GND and D0 +on core board. + +Connect the board to your computer via tyepc. +=> rkdeveloptool db rk3308_loader_v1.26.117.bin +=> rkdeveloptool wl 0x40 idbloader.img +=> rkdeveloptool wl 0x4000 u-boot.itb +=> rkdeveloptool rd + +Then you will see the boot log from Debug UART at baud rate 1500000: +DDR Version V1.26 +REGFB: 0x00000032, 0x00000032 +In +589MHz +DDR3 + Col=10 Bank=8 Row=14 Size=256MB +msch:1 +Returning to boot ROM... + +U-Boot SPL 2020.01-rc1-00225-g34b681327f (Nov 14 2019 - 10:58:04 +0800) +Trying to boot from MMC1 +INFO: Preloader serial: 2 +NOTICE: BL31: v1.3(release):30f1405 +NOTICE: BL31: Built : 17:08:28, Sep 23 2019 +INFO: Lastlog: last=0x100000, realtime=0x102000, size=0x2000 +INFO: ARM GICv2 driver initialized +INFO: Using opteed sec cpu_context! +INFO: boot cpu mask: 1 +INFO: plat_rockchip_pmu_init: pd status 0xe b +INFO: BL31: Initializing runtime services +WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will rK +ERROR: Error initializing runtime service opteed_fast +INFO: BL31: Preparing for EL3 exit to normal world +INFO: Entry point address = 0x600000 +INFO: SPSR = 0x3c9 + + +U-Boot 2020.01-rc1-00225-g34b681327f (Nov 14 2019 - 10:58:47 +0800) + +Model: Firefly ROC-RK3308-CC board +DRAM: 254 MiB +MMC: dwmmc@ff480000: 0, dwmmc@ff490000: 1 +rockchip_dnl_key_pressed read adc key val failed +Net: No ethernet found. +Hit any key to stop autoboot: 0 +Card did not respond to voltage select! +switch to partitions #0, OK +mmc1(part 0) is current device +Scanning mmc 1:4... +Found /extlinux/extlinux.conf +Retrieving file: /extlinux/extlinux.conf +151 bytes read in 3 ms (48.8 KiB/s) +1: kernel-mainline +Retrieving file: /Image +14737920 bytes read in 377 ms (37.3 MiB/s) +append: earlycon=uart8250,mmio32,0xff0c0000 console=ttyS2,1500000n8 +Retrieving file: /rk3308-roc-cc.dtb +28954 bytes read in 4 ms (6.9 MiB/s) +Flattened Device Tree blob at 01f00000 +Booting using the fdt blob at 0x1f00000 +## Loading Device Tree to 000000000df3a000, end 000000000df44119 ... OK + +Starting kernel ... +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd042] +[ 0.000000] Linux version 5.4.0-rc1-00040-g4dc2d508fa47-dirty (andy@B150) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-209 +[ 0.000000] Machine model: Firefly ROC-RK3308-CC board +[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff0c0000 (options '') +[ 0.000000] printk: bootconsole [uart8250] enabled + Booting from an SD card ======================= -- cgit v1.1