From 375d79cdbb6bdeaa9bc10dd34c3b22dd6838d4f3 Mon Sep 17 00:00:00 2001 From: Beniamino Galvani Date: Sun, 18 Aug 2019 15:42:55 +0200 Subject: odroid-c2: enable USB host controller Enable the second USB controller, which is connected to a hub with 4 ports. The first controller is for the OTG port and is currently not supported. Signed-off-by: Beniamino Galvani [narmstrong: removed useless DWC2_UTMI_WIDTH in meson64.h] Signed-off-by: Neil Armstrong --- arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi | 8 ++++++++ configs/odroid-c2_defconfig | 7 +++++++ 2 files changed, 15 insertions(+) diff --git a/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi b/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi index c35158d..484b405 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi +++ b/arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi @@ -5,3 +5,11 @@ */ #include "meson-gx-u-boot.dtsi" + +&usb0 { + status = "disabled"; +}; + +&usb1 { + hnp-srp-disable; +}; diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index 39279b4..3fb6f2d 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y @@ -32,14 +33,20 @@ CONFIG_MMC_MESON_GX=y CONFIG_PHY_REALTEK=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y +CONFIG_PHY=y +CONFIG_MESON_GXBB_USB_PHY=y CONFIG_PINCTRL=y CONFIG_PINCTRL_MESON_GXBB=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_RESET=y CONFIG_DEBUG_UART_MESON=y CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_DWC2=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_SMBIOS_MANUFACTURER="Hardkernel Co., Ltd." -- cgit v1.1