From c6ab91c77edd3f831ae6ddabd4462bff983fd3fd Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 17 Sep 2022 20:28:29 -0300 Subject: usb: Kconfig: Fix typo in SPL_DM_USB text Change a typo in "USB host mode". Signed-off-by: Fabio Estevam --- drivers/usb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index fd13cf3..3afb45d 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -48,7 +48,7 @@ config DM_USB automatically probed when found on the bus. config SPL_DM_USB - bool "Enable driver model for USB host most in SPL" + bool "Enable driver model for USB host mode in SPL" depends on SPL_DM && DM_USB default n if ARCH_MVEBU default y -- cgit v1.1 From c34edb893aca45b81460fc6ce341b4304f08f0f3 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 23 Aug 2022 19:06:50 +0200 Subject: usb: gadget: designware-udc: Drop the driver This driver is not used by any system and is long unmaintained, drop it. There is a DWC2 OTG driver which is maintained, see CONFIG_USB_GADGET_DWC2_OTG . Signed-off-by: Marek Vasut Reviewed-by: Patrice Chotard --- drivers/serial/usbtty.h | 2 - drivers/usb/gadget/Makefile | 1 - drivers/usb/gadget/designware_udc.c | 1021 ----------------------------------- include/usb/designware_udc.h | 183 ------- 4 files changed, 1207 deletions(-) delete mode 100644 drivers/usb/gadget/designware_udc.c delete mode 100644 include/usb/designware_udc.h diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h index 0d89fc0..e27aa36 100644 --- a/drivers/serial/usbtty.h +++ b/drivers/serial/usbtty.h @@ -13,8 +13,6 @@ #include #if defined(CONFIG_PPC) #include -#elif defined(CONFIG_DW_UDC) -#include #elif defined(CONFIG_CI_UDC) #include #endif diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 306dd31..dd09ee0 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -42,6 +42,5 @@ else ifdef CONFIG_USB_DEVICE obj-y += core.o obj-y += ep0.o -obj-$(CONFIG_DW_UDC) += designware_udc.o endif endif diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c deleted file mode 100644 index 41a6e8c..0000000 --- a/drivers/usb/gadget/designware_udc.c +++ /dev/null @@ -1,1021 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Based on drivers/usb/gadget/omap1510_udc.c - * TI OMAP1510 USB bus interface driver - * - * (C) Copyright 2009 - * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. - */ - -#include -#include -#include -#include - -#include -#include -#include "ep0.h" -#include -#include -#include - -#define UDC_INIT_MDELAY 80 /* Device settle delay */ - -/* Some kind of debugging output... */ -#ifndef DEBUG_DWUSBTTY -#define UDCDBG(str) -#define UDCDBGA(fmt, args...) -#else -#define UDCDBG(str) serial_printf(str "\n") -#define UDCDBGA(fmt, args...) serial_printf(fmt "\n", ##args) -#endif - -static struct urb *ep0_urb; -static struct usb_device_instance *udc_device; - -static struct plug_regs *const plug_regs_p = - (struct plug_regs * const)CONFIG_SYS_PLUG_BASE; -static struct udc_regs *const udc_regs_p = - (struct udc_regs * const)CONFIG_SYS_USBD_BASE; -static struct udc_endp_regs *const outep_regs_p = - &((struct udc_regs * const)CONFIG_SYS_USBD_BASE)->out_regs[0]; -static struct udc_endp_regs *const inep_regs_p = - &((struct udc_regs * const)CONFIG_SYS_USBD_BASE)->in_regs[0]; - -/* - * udc_state_transition - Write the next packet to TxFIFO. - * @initial: Initial state. - * @final: Final state. - * - * Helper function to implement device state changes. The device states and - * the events that transition between them are: - * - * STATE_ATTACHED - * || /\ - * \/ || - * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET - * || /\ - * \/ || - * STATE_POWERED - * || /\ - * \/ || - * DEVICE_RESET DEVICE_POWER_INTERRUPTION - * || /\ - * \/ || - * STATE_DEFAULT - * || /\ - * \/ || - * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET - * || /\ - * \/ || - * STATE_ADDRESSED - * || /\ - * \/ || - * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED - * || /\ - * \/ || - * STATE_CONFIGURED - * - * udc_state_transition transitions up (in the direction from STATE_ATTACHED - * to STATE_CONFIGURED) from the specified initial state to the specified final - * state, passing through each intermediate state on the way. If the initial - * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then - * no state transitions will take place. - * - * udc_state_transition also transitions down (in the direction from - * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the - * specified final state, passing through each intermediate state on the way. - * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final - * state, then no state transitions will take place. - * - * This function must only be called with interrupts disabled. - */ -static void udc_state_transition(usb_device_state_t initial, - usb_device_state_t final) -{ - if (initial < final) { - switch (initial) { - case STATE_ATTACHED: - usbd_device_event_irq(udc_device, - DEVICE_HUB_CONFIGURED, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq(udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq(udc_device, - DEVICE_ADDRESS_ASSIGNED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq(udc_device, DEVICE_CONFIGURED, 0); - case STATE_CONFIGURED: - break; - default: - break; - } - } else if (initial > final) { - switch (initial) { - case STATE_CONFIGURED: - usbd_device_event_irq(udc_device, - DEVICE_DE_CONFIGURED, 0); - if (final == STATE_ADDRESSED) - break; - case STATE_ADDRESSED: - usbd_device_event_irq(udc_device, DEVICE_RESET, 0); - if (final == STATE_DEFAULT) - break; - case STATE_DEFAULT: - usbd_device_event_irq(udc_device, - DEVICE_POWER_INTERRUPTION, 0); - if (final == STATE_POWERED) - break; - case STATE_POWERED: - usbd_device_event_irq(udc_device, DEVICE_HUB_RESET, 0); - case STATE_ATTACHED: - break; - default: - break; - } - } -} - -/* Stall endpoint */ -static void udc_stall_ep(u32 ep_num) -{ - writel(readl(&inep_regs_p[ep_num].endp_cntl) | ENDP_CNTL_STALL, - &inep_regs_p[ep_num].endp_cntl); - - writel(readl(&outep_regs_p[ep_num].endp_cntl) | ENDP_CNTL_STALL, - &outep_regs_p[ep_num].endp_cntl); -} - -static void *get_fifo(int ep_num, int in) -{ - u32 *fifo_ptr = (u32 *)CONFIG_SYS_FIFO_BASE; - - switch (ep_num) { - case UDC_EP3: - fifo_ptr += readl(&inep_regs_p[1].endp_bsorfn); - /* break intentionally left out */ - - case UDC_EP1: - fifo_ptr += readl(&inep_regs_p[0].endp_bsorfn); - /* break intentionally left out */ - - case UDC_EP0: - default: - if (in) { - fifo_ptr += - readl(&outep_regs_p[2].endp_maxpacksize) >> 16; - /* break intentionally left out */ - } else { - break; - } - - case UDC_EP2: - fifo_ptr += readl(&outep_regs_p[0].endp_maxpacksize) >> 16; - /* break intentionally left out */ - } - - return (void *)fifo_ptr; -} - -static int usbgetpckfromfifo(int epNum, u8 *bufp, u32 len) -{ - u8 *fifo_ptr = (u8 *)get_fifo(epNum, 0); - u32 i, nw, nb; - u32 *wrdp; - u8 *bytp; - u32 tmp[128]; - - if (readl(&udc_regs_p->dev_stat) & DEV_STAT_RXFIFO_EMPTY) - return -1; - - nw = len / sizeof(u32); - nb = len % sizeof(u32); - - /* use tmp buf if bufp is not word aligned */ - if ((int)bufp & 0x3) - wrdp = (u32 *)&tmp[0]; - else - wrdp = (u32 *)bufp; - - for (i = 0; i < nw; i++) { - writel(readl(fifo_ptr), wrdp); - wrdp++; - } - - bytp = (u8 *)wrdp; - for (i = 0; i < nb; i++) { - writeb(readb(fifo_ptr), bytp); - fifo_ptr++; - bytp++; - } - readl(&outep_regs_p[epNum].write_done); - - /* copy back tmp buffer to bufp if bufp is not word aligned */ - if ((int)bufp & 0x3) - memcpy(bufp, tmp, len); - - return 0; -} - -static void usbputpcktofifo(int epNum, u8 *bufp, u32 len) -{ - u32 i, nw, nb; - u32 *wrdp; - u8 *bytp; - u8 *fifo_ptr = get_fifo(epNum, 1); - - nw = len / sizeof(int); - nb = len % sizeof(int); - wrdp = (u32 *)bufp; - for (i = 0; i < nw; i++) { - writel(*wrdp, fifo_ptr); - wrdp++; - } - - bytp = (u8 *)wrdp; - for (i = 0; i < nb; i++) { - writeb(*bytp, fifo_ptr); - fifo_ptr++; - bytp++; - } -} - -/* - * dw_write_noniso_tx_fifo - Write the next packet to TxFIFO. - * @endpoint: Endpoint pointer. - * - * If the endpoint has an active tx_urb, then the next packet of data from the - * URB is written to the tx FIFO. The total amount of data in the urb is given - * by urb->actual_length. The maximum amount of data that can be sent in any - * one packet is given by endpoint->tx_packetSize. The number of data bytes - * from this URB that have already been transmitted is given by endpoint->sent. - * endpoint->last is updated by this routine with the number of data bytes - * transmitted in this packet. - * - */ -static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance - *endpoint) -{ - struct urb *urb = endpoint->tx_urb; - int align; - - if (urb) { - u32 last; - - UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d", - urb->buffer, urb->buffer_length, urb->actual_length); - - last = min_t(u32, urb->actual_length - endpoint->sent, - endpoint->tx_packetSize); - - if (last) { - u8 *cp = urb->buffer + endpoint->sent; - - /* - * This ensures that USBD packet fifo is accessed - * - through word aligned pointer or - * - through non word aligned pointer but only - * with a max length to make the next packet - * word aligned - */ - - align = ((ulong)cp % sizeof(int)); - if (align) - last = min(last, sizeof(int) - align); - - UDCDBGA("endpoint->sent %d, tx_packetSize %d, last %d", - endpoint->sent, endpoint->tx_packetSize, last); - - usbputpcktofifo(endpoint->endpoint_address & - USB_ENDPOINT_NUMBER_MASK, cp, last); - } - endpoint->last = last; - } -} - -/* - * Handle SETUP USB interrupt. - * This function implements TRM Figure 14-14. - */ -static void dw_udc_setup(struct usb_endpoint_instance *endpoint) -{ - u8 *datap = (u8 *)&ep0_urb->device_request; - int ep_addr = endpoint->endpoint_address; - - UDCDBG("-> Entering device setup"); - usbgetpckfromfifo(ep_addr, datap, 8); - - /* Try to process setup packet */ - if (ep0_recv_setup(ep0_urb)) { - /* Not a setup packet, stall next EP0 transaction */ - udc_stall_ep(0); - UDCDBG("can't parse setup packet, still waiting for setup"); - return; - } - - /* Check direction */ - if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) - == USB_REQ_HOST2DEVICE) { - UDCDBG("control write on EP0"); - if (le16_to_cpu(ep0_urb->device_request.wLength)) { - /* Stall this request */ - UDCDBG("Stalling unsupported EP0 control write data " - "stage."); - udc_stall_ep(0); - } - } else { - - UDCDBG("control read on EP0"); - /* - * The ep0_recv_setup function has already placed our response - * packet data in ep0_urb->buffer and the packet length in - * ep0_urb->actual_length. - */ - endpoint->tx_urb = ep0_urb; - endpoint->sent = 0; - /* - * Write packet data to the FIFO. dw_write_noniso_tx_fifo - * will update endpoint->last with the number of bytes written - * to the FIFO. - */ - dw_write_noniso_tx_fifo(endpoint); - - writel(0x0, &inep_regs_p[ep_addr].write_done); - } - - udc_unset_nak(endpoint->endpoint_address); - - UDCDBG("<- Leaving device setup"); -} - -/* - * Handle endpoint 0 RX interrupt - */ -static void dw_udc_ep0_rx(struct usb_endpoint_instance *endpoint) -{ - u8 dummy[64]; - - UDCDBG("RX on EP0"); - - /* Check direction */ - if ((ep0_urb->device_request.bmRequestType - & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) { - /* - * This rx interrupt must be for a control write data - * stage packet. - * - * We don't support control write data stages. - * We should never end up here. - */ - - UDCDBG("Stalling unexpected EP0 control write " - "data stage packet"); - udc_stall_ep(0); - } else { - /* - * This rx interrupt must be for a control read status - * stage packet. - */ - UDCDBG("ACK on EP0 control read status stage packet"); - u32 len = (readl(&outep_regs_p[0].endp_status) >> 11) & 0xfff; - usbgetpckfromfifo(0, dummy, len); - } -} - -/* - * Handle endpoint 0 TX interrupt - */ -static void dw_udc_ep0_tx(struct usb_endpoint_instance *endpoint) -{ - struct usb_device_request *request = &ep0_urb->device_request; - int ep_addr; - - UDCDBG("TX on EP0"); - - /* Check direction */ - if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) == - USB_REQ_HOST2DEVICE) { - /* - * This tx interrupt must be for a control write status - * stage packet. - */ - UDCDBG("ACK on EP0 control write status stage packet"); - } else { - /* - * This tx interrupt must be for a control read data - * stage packet. - */ - int wLength = le16_to_cpu(request->wLength); - - /* - * Update our count of bytes sent so far in this - * transfer. - */ - endpoint->sent += endpoint->last; - - /* - * We are finished with this transfer if we have sent - * all of the bytes in our tx urb (urb->actual_length) - * unless we need a zero-length terminating packet. We - * need a zero-length terminating packet if we returned - * fewer bytes than were requested (wLength) by the host, - * and the number of bytes we returned is an exact - * multiple of the packet size endpoint->tx_packetSize. - */ - if ((endpoint->sent == ep0_urb->actual_length) && - ((ep0_urb->actual_length == wLength) || - (endpoint->last != endpoint->tx_packetSize))) { - /* Done with control read data stage. */ - UDCDBG("control read data stage complete"); - } else { - /* - * We still have another packet of data to send - * in this control read data stage or else we - * need a zero-length terminating packet. - */ - UDCDBG("ACK control read data stage packet"); - dw_write_noniso_tx_fifo(endpoint); - - ep_addr = endpoint->endpoint_address; - writel(0x0, &inep_regs_p[ep_addr].write_done); - } - } -} - -static struct usb_endpoint_instance *dw_find_ep(int ep) -{ - int i; - - for (i = 0; i < udc_device->bus->max_endpoints; i++) { - if ((udc_device->bus->endpoint_array[i].endpoint_address & - USB_ENDPOINT_NUMBER_MASK) == ep) - return &udc_device->bus->endpoint_array[i]; - } - return NULL; -} - -/* - * Handle RX transaction on non-ISO endpoint. - * The ep argument is a physical endpoint number for a non-ISO IN endpoint - * in the range 1 to 15. - */ -static void dw_udc_epn_rx(int ep) -{ - int nbytes = 0; - struct urb *urb; - struct usb_endpoint_instance *endpoint = dw_find_ep(ep); - - if (endpoint) { - urb = endpoint->rcv_urb; - - if (urb) { - u8 *cp = urb->buffer + urb->actual_length; - - nbytes = (readl(&outep_regs_p[ep].endp_status) >> 11) & - 0xfff; - usbgetpckfromfifo(ep, cp, nbytes); - usbd_rcv_complete(endpoint, nbytes, 0); - } - } -} - -/* - * Handle TX transaction on non-ISO endpoint. - * The ep argument is a physical endpoint number for a non-ISO IN endpoint - * in the range 16 to 30. - */ -static void dw_udc_epn_tx(int ep) -{ - struct usb_endpoint_instance *endpoint = dw_find_ep(ep); - - if (!endpoint) - return; - - /* - * We need to transmit a terminating zero-length packet now if - * we have sent all of the data in this URB and the transfer - * size was an exact multiple of the packet size. - */ - if (endpoint->tx_urb && - (endpoint->last == endpoint->tx_packetSize) && - (endpoint->tx_urb->actual_length - endpoint->sent - - endpoint->last == 0)) { - /* handle zero length packet here */ - writel(0x0, &inep_regs_p[ep].write_done); - - } - - if (endpoint->tx_urb && endpoint->tx_urb->actual_length) { - /* retire the data that was just sent */ - usbd_tx_complete(endpoint); - /* - * Check to see if we have more data ready to transmit - * now. - */ - if (endpoint->tx_urb && endpoint->tx_urb->actual_length) { - /* write data to FIFO */ - dw_write_noniso_tx_fifo(endpoint); - writel(0x0, &inep_regs_p[ep].write_done); - - } else if (endpoint->tx_urb - && (endpoint->tx_urb->actual_length == 0)) { - /* udc_set_nak(ep); */ - } - } -} - -/* - * Start of public functions. - */ - -/* Called to start packet transmission. */ -int udc_endpoint_write(struct usb_endpoint_instance *endpoint) -{ - udc_unset_nak(endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK); - return 0; -} - -/* Start to initialize h/w stuff */ -int udc_init(void) -{ - int i; - u32 plug_st; - - udc_device = NULL; - - UDCDBG("starting"); - - readl(&plug_regs_p->plug_pending); - - for (i = 0; i < UDC_INIT_MDELAY; i++) - udelay(1000); - - plug_st = readl(&plug_regs_p->plug_state); - writel(plug_st | PLUG_STATUS_EN, &plug_regs_p->plug_state); - - writel(~0x0, &udc_regs_p->endp_int); - writel(~0x0, &udc_regs_p->dev_int_mask); - writel(~0x0, &udc_regs_p->endp_int_mask); - -#ifndef CONFIG_USBD_HS - writel(DEV_CONF_FS_SPEED | DEV_CONF_REMWAKEUP | DEV_CONF_SELFPOW | - DEV_CONF_PHYINT_16, &udc_regs_p->dev_conf); -#else - writel(DEV_CONF_HS_SPEED | DEV_CONF_REMWAKEUP | DEV_CONF_SELFPOW | - DEV_CONF_PHYINT_16, &udc_regs_p->dev_conf); -#endif - - writel(DEV_CNTL_SOFTDISCONNECT, &udc_regs_p->dev_cntl); - - /* Clear all interrupts pending */ - writel(DEV_INT_MSK, &udc_regs_p->dev_int); - - return 0; -} - -int is_usbd_high_speed(void) -{ - return (readl(&udc_regs_p->dev_stat) & DEV_STAT_ENUM) ? 0 : 1; -} - -/* - * udc_setup_ep - setup endpoint - * Associate a physical endpoint with endpoint_instance - */ -void udc_setup_ep(struct usb_device_instance *device, - u32 ep, struct usb_endpoint_instance *endpoint) -{ - UDCDBGA("setting up endpoint addr %x", endpoint->endpoint_address); - int ep_addr; - int ep_num, ep_type; - int packet_size; - int buffer_size; - int attributes; - char *tt; - u32 endp_intmask; - - if ((ep != 0) && (udc_device->device_state < STATE_ADDRESSED)) - return; - - tt = env_get("usbtty"); - if (!tt) - tt = "generic"; - - ep_addr = endpoint->endpoint_address; - ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK; - - if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* IN endpoint */ - packet_size = endpoint->tx_packetSize; - buffer_size = packet_size * 2; - attributes = endpoint->tx_attributes; - } else { - /* OUT endpoint */ - packet_size = endpoint->rcv_packetSize; - buffer_size = packet_size * 2; - attributes = endpoint->rcv_attributes; - } - - switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) { - case USB_ENDPOINT_XFER_CONTROL: - ep_type = ENDP_EPTYPE_CNTL; - break; - case USB_ENDPOINT_XFER_BULK: - default: - ep_type = ENDP_EPTYPE_BULK; - break; - case USB_ENDPOINT_XFER_INT: - ep_type = ENDP_EPTYPE_INT; - break; - case USB_ENDPOINT_XFER_ISOC: - ep_type = ENDP_EPTYPE_ISO; - break; - } - - struct udc_endp_regs *out_p = &outep_regs_p[ep_num]; - struct udc_endp_regs *in_p = &inep_regs_p[ep_num]; - - if (!ep_addr) { - /* Setup endpoint 0 */ - buffer_size = packet_size; - - writel(readl(&in_p->endp_cntl) | ENDP_CNTL_CNAK, - &in_p->endp_cntl); - - writel(readl(&out_p->endp_cntl) | ENDP_CNTL_CNAK, - &out_p->endp_cntl); - - writel(ENDP_CNTL_CONTROL | ENDP_CNTL_FLUSH, &in_p->endp_cntl); - - writel(buffer_size / sizeof(int), &in_p->endp_bsorfn); - - writel(packet_size, &in_p->endp_maxpacksize); - - writel(ENDP_CNTL_CONTROL | ENDP_CNTL_RRDY, &out_p->endp_cntl); - - writel(packet_size | ((buffer_size / sizeof(int)) << 16), - &out_p->endp_maxpacksize); - - } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { - /* Setup the IN endpoint */ - writel(0x0, &in_p->endp_status); - writel((ep_type << 4) | ENDP_CNTL_RRDY, &in_p->endp_cntl); - writel(buffer_size / sizeof(int), &in_p->endp_bsorfn); - writel(packet_size, &in_p->endp_maxpacksize); - - if (!strcmp(tt, "cdc_acm")) { - if (ep_type == ENDP_EPTYPE_INT) { - /* Conf no. 1 Interface no. 0 */ - writel((packet_size << 19) | - ENDP_EPDIR_IN | (1 << 7) | - (0 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } else { - /* Conf no. 1 Interface no. 1 */ - writel((packet_size << 19) | - ENDP_EPDIR_IN | (1 << 7) | - (1 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } - } else { - /* Conf no. 1 Interface no. 0 */ - writel((packet_size << 19) | - ENDP_EPDIR_IN | (1 << 7) | - (0 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } - - } else { - /* Setup the OUT endpoint */ - writel(0x0, &out_p->endp_status); - writel((ep_type << 4) | ENDP_CNTL_RRDY, &out_p->endp_cntl); - writel(packet_size | ((buffer_size / sizeof(int)) << 16), - &out_p->endp_maxpacksize); - - if (!strcmp(tt, "cdc_acm")) { - writel((packet_size << 19) | - ENDP_EPDIR_OUT | (1 << 7) | - (1 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } else { - writel((packet_size << 19) | - ENDP_EPDIR_OUT | (1 << 7) | - (0 << 11) | (ep_type << 5) | ep_num, - &udc_regs_p->udc_endp_reg[ep_num]); - } - - } - - endp_intmask = readl(&udc_regs_p->endp_int_mask); - endp_intmask &= ~((1 << ep_num) | 0x10000 << ep_num); - writel(endp_intmask, &udc_regs_p->endp_int_mask); -} - -/* Turn on the USB connection by enabling the pullup resistor */ -void udc_connect(void) -{ - u32 plug_st, dev_cntl; - - dev_cntl = readl(&udc_regs_p->dev_cntl); - dev_cntl |= DEV_CNTL_SOFTDISCONNECT; - writel(dev_cntl, &udc_regs_p->dev_cntl); - - udelay(1000); - - dev_cntl = readl(&udc_regs_p->dev_cntl); - dev_cntl &= ~DEV_CNTL_SOFTDISCONNECT; - writel(dev_cntl, &udc_regs_p->dev_cntl); - - plug_st = readl(&plug_regs_p->plug_state); - plug_st &= ~(PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE); - writel(plug_st, &plug_regs_p->plug_state); -} - -/* Turn off the USB connection by disabling the pullup resistor */ -void udc_disconnect(void) -{ - u32 plug_st; - - writel(DEV_CNTL_SOFTDISCONNECT, &udc_regs_p->dev_cntl); - - plug_st = readl(&plug_regs_p->plug_state); - plug_st |= (PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE); - writel(plug_st, &plug_regs_p->plug_state); -} - -/* Switch on the UDC */ -void udc_enable(struct usb_device_instance *device) -{ - UDCDBGA("enable device %p, status %d", device, device->status); - - /* Save the device structure pointer */ - udc_device = device; - - /* Setup ep0 urb */ - if (!ep0_urb) { - ep0_urb = - usbd_alloc_urb(udc_device, udc_device->bus->endpoint_array); - } else { - serial_printf("udc_enable: ep0_urb already allocated %p\n", - ep0_urb); - } - - writel(DEV_INT_SOF, &udc_regs_p->dev_int_mask); -} - -/** - * udc_startup - allow udc code to do any additional startup - */ -void udc_startup_events(struct usb_device_instance *device) -{ - /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ - usbd_device_event_irq(device, DEVICE_INIT, 0); - - /* - * The DEVICE_CREATE event puts the USB device in the state - * STATE_ATTACHED. - */ - usbd_device_event_irq(device, DEVICE_CREATE, 0); - - /* - * Some USB controller driver implementations signal - * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. - * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, - * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. - * The DW USB client controller has the capability to detect when the - * USB cable is connected to a powered USB bus, so we will defer the - * DEVICE_HUB_CONFIGURED and DEVICE_RESET events until later. - */ - - udc_enable(device); -} - -/* - * Plug detection interrupt handling - */ -static void dw_udc_plug_irq(void) -{ - if (readl(&plug_regs_p->plug_state) & PLUG_STATUS_ATTACHED) { - /* - * USB cable attached - * Turn off PHY reset bit (PLUG detect). - * Switch PHY opmode to normal operation (PLUG detect). - */ - udc_connect(); - writel(DEV_INT_SOF, &udc_regs_p->dev_int_mask); - - UDCDBG("device attached and powered"); - udc_state_transition(udc_device->device_state, STATE_POWERED); - } else { - writel(~0x0, &udc_regs_p->dev_int_mask); - - UDCDBG("device detached or unpowered"); - udc_state_transition(udc_device->device_state, STATE_ATTACHED); - } -} - -/* - * Device interrupt handling - */ -static void dw_udc_dev_irq(void) -{ - if (readl(&udc_regs_p->dev_int) & DEV_INT_USBRESET) { - writel(~0x0, &udc_regs_p->endp_int_mask); - - writel(readl(&inep_regs_p[0].endp_cntl) | ENDP_CNTL_FLUSH, - &inep_regs_p[0].endp_cntl); - - writel(DEV_INT_USBRESET, &udc_regs_p->dev_int); - - /* - * This endpoint0 specific register can be programmed only - * after the phy clock is initialized - */ - writel((EP0_MAX_PACKET_SIZE << 19) | ENDP_EPTYPE_CNTL, - &udc_regs_p->udc_endp_reg[0]); - - UDCDBG("device reset in progess"); - udc_state_transition(udc_device->device_state, STATE_DEFAULT); - } - - /* Device Enumeration completed */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_ENUM) { - writel(DEV_INT_ENUM, &udc_regs_p->dev_int); - - /* Endpoint interrupt enabled for Ctrl IN & Ctrl OUT */ - writel(readl(&udc_regs_p->endp_int_mask) & ~0x10001, - &udc_regs_p->endp_int_mask); - - UDCDBG("default -> addressed"); - udc_state_transition(udc_device->device_state, STATE_ADDRESSED); - } - - /* The USB will be in SUSPEND in 3 ms */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_INACTIVE) { - writel(DEV_INT_INACTIVE, &udc_regs_p->dev_int); - - UDCDBG("entering inactive state"); - /* usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0); */ - } - - /* SetConfiguration command received */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_SETCFG) { - writel(DEV_INT_SETCFG, &udc_regs_p->dev_int); - - UDCDBG("entering configured state"); - udc_state_transition(udc_device->device_state, - STATE_CONFIGURED); - } - - /* SetInterface command received */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_SETINTF) - writel(DEV_INT_SETINTF, &udc_regs_p->dev_int); - - /* USB Suspend detected on cable */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_SUSPUSB) { - writel(DEV_INT_SUSPUSB, &udc_regs_p->dev_int); - - UDCDBG("entering suspended state"); - usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0); - } - - /* USB Start-Of-Frame detected on cable */ - if (readl(&udc_regs_p->dev_int) & DEV_INT_SOF) - writel(DEV_INT_SOF, &udc_regs_p->dev_int); -} - -/* - * Endpoint interrupt handling - */ -static void dw_udc_endpoint_irq(void) -{ - while (readl(&udc_regs_p->endp_int) & ENDP0_INT_CTRLOUT) { - - writel(ENDP0_INT_CTRLOUT, &udc_regs_p->endp_int); - - if ((readl(&outep_regs_p[0].endp_status) & ENDP_STATUS_OUTMSK) - == ENDP_STATUS_OUT_SETUP) { - dw_udc_setup(udc_device->bus->endpoint_array + 0); - writel(ENDP_STATUS_OUT_SETUP, - &outep_regs_p[0].endp_status); - - } else if ((readl(&outep_regs_p[0].endp_status) & - ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_DATA) { - dw_udc_ep0_rx(udc_device->bus->endpoint_array + 0); - writel(ENDP_STATUS_OUT_DATA, - &outep_regs_p[0].endp_status); - - } else if ((readl(&outep_regs_p[0].endp_status) & - ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_NONE) { - /* NONE received */ - } - - writel(0x0, &outep_regs_p[0].endp_status); - } - - if (readl(&udc_regs_p->endp_int) & ENDP0_INT_CTRLIN) { - dw_udc_ep0_tx(udc_device->bus->endpoint_array + 0); - - writel(ENDP_STATUS_IN, &inep_regs_p[0].endp_status); - writel(ENDP0_INT_CTRLIN, &udc_regs_p->endp_int); - } - - if (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOOUT_MSK) { - u32 epnum = 0; - u32 ep_int = readl(&udc_regs_p->endp_int) & - ENDP_INT_NONISOOUT_MSK; - - ep_int >>= 16; - while (0x0 == (ep_int & 0x1)) { - ep_int >>= 1; - epnum++; - } - - writel((1 << 16) << epnum, &udc_regs_p->endp_int); - - if ((readl(&outep_regs_p[epnum].endp_status) & - ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_DATA) { - - dw_udc_epn_rx(epnum); - writel(ENDP_STATUS_OUT_DATA, - &outep_regs_p[epnum].endp_status); - } else if ((readl(&outep_regs_p[epnum].endp_status) & - ENDP_STATUS_OUTMSK) == ENDP_STATUS_OUT_NONE) { - writel(0x0, &outep_regs_p[epnum].endp_status); - } - } - - if (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOIN_MSK) { - u32 epnum = 0; - u32 ep_int = readl(&udc_regs_p->endp_int) & - ENDP_INT_NONISOIN_MSK; - - while (0x0 == (ep_int & 0x1)) { - ep_int >>= 1; - epnum++; - } - - if (readl(&inep_regs_p[epnum].endp_status) & ENDP_STATUS_IN) { - writel(ENDP_STATUS_IN, - &outep_regs_p[epnum].endp_status); - dw_udc_epn_tx(epnum); - - writel(ENDP_STATUS_IN, - &outep_regs_p[epnum].endp_status); - } - - writel((1 << epnum), &udc_regs_p->endp_int); - } -} - -/* - * UDC interrupts - */ -void udc_irq(void) -{ - /* - * Loop while we have interrupts. - * If we don't do this, the input chain - * polling delay is likely to miss - * host requests. - */ - while (readl(&plug_regs_p->plug_pending)) - dw_udc_plug_irq(); - - while (readl(&udc_regs_p->dev_int)) - dw_udc_dev_irq(); - - if (readl(&udc_regs_p->endp_int)) - dw_udc_endpoint_irq(); -} - -/* Flow control */ -void udc_set_nak(int epid) -{ - writel(readl(&inep_regs_p[epid].endp_cntl) | ENDP_CNTL_SNAK, - &inep_regs_p[epid].endp_cntl); - - writel(readl(&outep_regs_p[epid].endp_cntl) | ENDP_CNTL_SNAK, - &outep_regs_p[epid].endp_cntl); -} - -void udc_unset_nak(int epid) -{ - u32 val; - - val = readl(&inep_regs_p[epid].endp_cntl); - val &= ~ENDP_CNTL_SNAK; - val |= ENDP_CNTL_CNAK; - writel(val, &inep_regs_p[epid].endp_cntl); - - val = readl(&outep_regs_p[epid].endp_cntl); - val &= ~ENDP_CNTL_SNAK; - val |= ENDP_CNTL_CNAK; - writel(val, &outep_regs_p[epid].endp_cntl); -} diff --git a/include/usb/designware_udc.h b/include/usb/designware_udc.h deleted file mode 100644 index f716f07..0000000 --- a/include/usb/designware_udc.h +++ /dev/null @@ -1,183 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Vipin Kumar, STMicroelectronics, vipin.kumar@st.com. - */ - -#ifndef __DW_UDC_H -#define __DW_UDC_H - -/* - * Defines for USBD - * - * The udc_ahb controller has three AHB slaves: - * - * 1. THe UDC registers - * 2. The plug detect - * 3. The RX/TX FIFO - */ - -#define MAX_ENDPOINTS 16 - -struct udc_endp_regs { - u32 endp_cntl; - u32 endp_status; - u32 endp_bsorfn; - u32 endp_maxpacksize; - u32 reserved_1; - u32 endp_desc_point; - u32 reserved_2; - u32 write_done; -}; - -/* Endpoint Control Register definitions */ - -#define ENDP_CNTL_STALL 0x00000001 -#define ENDP_CNTL_FLUSH 0x00000002 -#define ENDP_CNTL_SNOOP 0x00000004 -#define ENDP_CNTL_POLL 0x00000008 -#define ENDP_CNTL_CONTROL 0x00000000 -#define ENDP_CNTL_ISO 0x00000010 -#define ENDP_CNTL_BULK 0x00000020 -#define ENDP_CNTL_INT 0x00000030 -#define ENDP_CNTL_NAK 0x00000040 -#define ENDP_CNTL_SNAK 0x00000080 -#define ENDP_CNTL_CNAK 0x00000100 -#define ENDP_CNTL_RRDY 0x00000200 - -/* Endpoint Satus Register definitions */ - -#define ENDP_STATUS_PIDMSK 0x0000000f -#define ENDP_STATUS_OUTMSK 0x00000030 -#define ENDP_STATUS_OUT_NONE 0x00000000 -#define ENDP_STATUS_OUT_DATA 0x00000010 -#define ENDP_STATUS_OUT_SETUP 0x00000020 -#define ENDP_STATUS_IN 0x00000040 -#define ENDP_STATUS_BUFFNAV 0x00000080 -#define ENDP_STATUS_FATERR 0x00000100 -#define ENDP_STATUS_HOSTBUSERR 0x00000200 -#define ENDP_STATUS_TDC 0x00000400 -#define ENDP_STATUS_RXPKTMSK 0x003ff800 - -struct udc_regs { - struct udc_endp_regs in_regs[MAX_ENDPOINTS]; - struct udc_endp_regs out_regs[MAX_ENDPOINTS]; - u32 dev_conf; - u32 dev_cntl; - u32 dev_stat; - u32 dev_int; - u32 dev_int_mask; - u32 endp_int; - u32 endp_int_mask; - u32 reserved_3[0x39]; - u32 reserved_4; /* offset 0x500 */ - u32 udc_endp_reg[MAX_ENDPOINTS]; -}; - -/* Device Configuration Register definitions */ - -#define DEV_CONF_HS_SPEED 0x00000000 -#define DEV_CONF_LS_SPEED 0x00000002 -#define DEV_CONF_FS_SPEED 0x00000003 -#define DEV_CONF_REMWAKEUP 0x00000004 -#define DEV_CONF_SELFPOW 0x00000008 -#define DEV_CONF_SYNCFRAME 0x00000010 -#define DEV_CONF_PHYINT_8 0x00000020 -#define DEV_CONF_PHYINT_16 0x00000000 -#define DEV_CONF_UTMI_BIDIR 0x00000040 -#define DEV_CONF_STATUS_STALL 0x00000080 - -/* Device Control Register definitions */ - -#define DEV_CNTL_RESUME 0x00000001 -#define DEV_CNTL_TFFLUSH 0x00000002 -#define DEV_CNTL_RXDMAEN 0x00000004 -#define DEV_CNTL_TXDMAEN 0x00000008 -#define DEV_CNTL_DESCRUPD 0x00000010 -#define DEV_CNTL_BIGEND 0x00000020 -#define DEV_CNTL_BUFFILL 0x00000040 -#define DEV_CNTL_TSHLDEN 0x00000080 -#define DEV_CNTL_BURSTEN 0x00000100 -#define DEV_CNTL_DMAMODE 0x00000200 -#define DEV_CNTL_SOFTDISCONNECT 0x00000400 -#define DEV_CNTL_SCALEDOWN 0x00000800 -#define DEV_CNTL_BURSTLENU 0x00010000 -#define DEV_CNTL_BURSTLENMSK 0x00ff0000 -#define DEV_CNTL_TSHLDLENU 0x01000000 -#define DEV_CNTL_TSHLDLENMSK 0xff000000 - -/* Device Status Register definitions */ - -#define DEV_STAT_CFG 0x0000000f -#define DEV_STAT_INTF 0x000000f0 -#define DEV_STAT_ALT 0x00000f00 -#define DEV_STAT_SUSP 0x00001000 -#define DEV_STAT_ENUM 0x00006000 -#define DEV_STAT_ENUM_SPEED_HS 0x00000000 -#define DEV_STAT_ENUM_SPEED_FS 0x00002000 -#define DEV_STAT_ENUM_SPEED_LS 0x00004000 -#define DEV_STAT_RXFIFO_EMPTY 0x00008000 -#define DEV_STAT_PHY_ERR 0x00010000 -#define DEV_STAT_TS 0xf0000000 - -/* Device Interrupt Register definitions */ - -#define DEV_INT_MSK 0x0000007f -#define DEV_INT_SETCFG 0x00000001 -#define DEV_INT_SETINTF 0x00000002 -#define DEV_INT_INACTIVE 0x00000004 -#define DEV_INT_USBRESET 0x00000008 -#define DEV_INT_SUSPUSB 0x00000010 -#define DEV_INT_SOF 0x00000020 -#define DEV_INT_ENUM 0x00000040 - -/* Endpoint Interrupt Register definitions */ - -#define ENDP0_INT_CTRLIN 0x00000001 -#define ENDP1_INT_BULKIN 0x00000002 -#define ENDP_INT_NONISOIN_MSK 0x0000AAAA -#define ENDP2_INT_BULKIN 0x00000004 -#define ENDP0_INT_CTRLOUT 0x00010000 -#define ENDP1_INT_BULKOUT 0x00020000 -#define ENDP2_INT_BULKOUT 0x00040000 -#define ENDP_INT_NONISOOUT_MSK 0x55540000 - -/* Endpoint Register definitions */ -#define ENDP_EPDIR_OUT 0x00000000 -#define ENDP_EPDIR_IN 0x00000010 -#define ENDP_EPTYPE_CNTL 0x0 -#define ENDP_EPTYPE_ISO 0x1 -#define ENDP_EPTYPE_BULK 0x2 -#define ENDP_EPTYPE_INT 0x3 - -/* - * Defines for Plug Detect - */ - -struct plug_regs { - u32 plug_state; - u32 plug_pending; -}; - -/* Plug State Register definitions */ -#define PLUG_STATUS_EN 0x1 -#define PLUG_STATUS_ATTACHED 0x2 -#define PLUG_STATUS_PHY_RESET 0x4 -#define PLUG_STATUS_PHY_MODE 0x8 - -/* - * Defines for UDC FIFO (Slave Mode) - */ -struct udcfifo_regs { - u32 *fifo_p; -}; - -/* - * UDC endpoint definitions - */ -#define UDC_EP0 0 -#define UDC_EP1 1 -#define UDC_EP2 2 -#define UDC_EP3 3 - -#endif /* __DW_UDC_H */ -- cgit v1.1