aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2023-03-24tools: kwboot: Document information about NOR XIPPali Rohár1-1/+3
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-03-24tools: kwboot: Workaround A38x BootROM bug for images with a gapPali Rohár1-0/+23
A38x BootROM has a bug which cause that BootROM loads data part of UART image into RAM target address increased by one byte when source address and header size stored in the image header are not same. Workaround this bug by completely removing a gap between header and data part of the UART image. Without gap, this BootROM bug is not triggered. This gap can be present in SDIO or SATA image types which have aligned start of the data part to the media sector size. With this workaround kwboot should be able to convert and send SDIO or SATA images for UART booting. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-03-24tools: kwboot: Fix sending very small imagesPali Rohár1-0/+2
Sending of very small images (smaller than 128 bytes = xmodem block size) cause out-of-bound memory read access. Fix this issue by ensuring that hdrsz when sending image is not larger than total size of the image. Issue was introduced in commit f8017c37799c ("tools: kwboot: Fix sending Kirkwood v0 images"). Special case when total image is smaller than header size aligned to multiply of xmodem size is already handled since that commit. Fixes: f8017c37799c ("tools: kwboot: Fix sending Kirkwood v0 images") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-03-24tools: kwboot: Fix inserting UART data checksum without -B optionPali Rohár1-0/+2
Commit 7665ed2fa04e ("tools: kwboot: Fix parsing UART image without data checksum") added fixup code to insert place for data checksum if UART image does not have it. Together with option -B (change baudrate), kwboot calculates this checksum. Without option -B, it inserts only place for checksum but does not calculate it. This commit fix above logic and calculate data checksum also when kwboot is used without -B option. Fixes: 7665ed2fa04e ("tools: kwboot: Fix parsing UART image without data checksum") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-03-24tools: kwboot: Fix invalid UART kwbimage v1 headerszPali Rohár1-0/+11
Ensure that UART aligned header size is always stored into kwbimage v1 header. It is needed for proper UART booting. Calculation of headersz field was broken in commit d656f5a0ee22 ("tools: kwboot: Calculate real used space in kwbimage header when calling kwboot_img_grow_hdr()") which introduced optimization of kwboot_img_grow_hdr() function. Fixes: d656f5a0ee22 ("tools: kwboot: Calculate real used space in kwbimage header when calling kwboot_img_grow_hdr()") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-03-24tools: kwbimage: Fix invalid UART kwbimage v1 headerszPali Rohár1-0/+10
Armada 385 BootROM ignores low 7 bits of headersz when parsing kwbimage header of UART type, which effectively means that headersz is rounded down to multiply of 128 bytes. For all other image types BootROM reads and use all bits of headersz. Therefore fill into UART type of kwbimage v1 headersz aligned to 128 bytes. Fixes: 2b0980c24027 ("tools: kwbimage: Fill the real header size into the main header") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-03-22proftool: Remove unused variables in make_flame_treeTom Rini1-14/+1
With clang-15 we now get reported that in the make_flame_tree function, neither the missing_count nor depth variables are used, only incremenete/decremented. Remove these. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-22imx8image: Remove unused cont_img_count variableTom Rini1-5/+0
With clang-15, it is now reported that cont_img_count is unused. This is true as the code will increment / reset this counter, but never functionally use it. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-03-21Dockerfile: Update to latest "Jammy" tagTom Rini1-1/+1
Update to using the latest "Jammy" tag as our base. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-21Dockerfile: Add m68k-softmmu to qemuTom Rini1-1/+1
Given efforts to add an m68k target to CI, build qemu for it. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-03-16Merge tag 'xilinx-for-v2023.07-rc1' of ↵WIP/16Mar2023-nextTom Rini1-16/+36
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2023.07-rc1 cmd: - Print results in hex instead of dec in smc command firmware: - Cover missing ZYNQMP_FIRMWARE dependencies fpga: - fix loads for unencrypted use case relocation - Add support for BE systems spi: - Fix xilinx_spi init reset sequence arasan nand: - Remove hardcoded bbt option - Set ofnode value xilinx: - Enable SMC command - Fix some sparse issues zynqmp: - Remove cdns,zynq-gem compatible string - Add optee node - Some DT cleanups zynq: - Some DT cleanups microblaze - Remove MANUAL_RELOC option
2023-03-16Merge tag 'dm-next-12mar23a' of git://git.denx.de/u-boot-dm into nextTom Rini12-2/+474
More tests and fixes for fdt command binman signing feature fix buildman -A bug introduced recently Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-14buildman: Fix CROSS_COMPILE output for sandboxSimon Glass1-2/+3
The previous attempt at fixing this broke the normal usage of the -A flag. At present, 'buildman -A sandbox' adds the path containing the toolchain. We can assume that this is in the path and we don't want to set CROSS_COMPILE=/bin/ Change this to align with what MakeEnvironment() does, but only for sandbox boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14Revert "buildman: Correct CROSS_COMPILE output for sandbox"Simon Glass1-1/+2
This reverts commit bd0a548ad4a155fec29473d4cc8e135832926973. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14tools: add fdt_add_pubkeyRoman Kopytin3-0/+142
Having to use the -K option to mkimage to populate U-Boot's .dtb with the public key while signing the kernel FIT image is often a little awkward. In particular, when using a meta-build system such as bitbake/Yocto, having the tasks of the kernel and U-Boot recipes intertwined, modifying deployed artifacts and rebuilding U-Boot with an updated .dtb is quite cumbersome. Also, in some scenarios one may wish to build U-Boot complete with the public key(s) embedded in the .dtb without the corresponding private keys being present on the same build host. So this adds a simple tool that allows one to disentangle the kernel and U-Boot builds, by simply copy-pasting just enough of the mkimage code to allow one to add a public key to a .dtb. When using mkimage, some of the information is taken from the .its used to build the kernel (algorithm and key name), so that of course needs to be supplied on the command line. Signed-off-by: Roman Kopytin <Roman.Kopytin@kaspersky.com> Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2023-03-14binman: add tests for sign optionIvan Mikhaylov7-6/+227
Add the test which provides sequence of actions: 1. create the image from binman dts 2. create public and private keys 3. add public key into dtb with fdt_add_pubkey 4. 1. sign FIT container with new sign option with extracting from image 2. sign exact FIT container with replacing of it in image 5. check with fit_check_sign Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Renumber test file from 277 to 280; Move UpdateSignatures() to Entry base class; Don't allow missing mkimage as it doesn't make sense; Propagate --toolpath for CI; Call mark_build_done() to avoid regenerating FIT: Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14binman: add sign option for binmanIvan Mikhaylov4-1/+61
Introduce proof of concept for binman's new option which provides sign and replace FIT containers in binary images. Usage as example: from: mkimage -G privateky -r -o sha256,rsa4096 -F fit binman replace -i flash.bin -f fit.fit fit to: binman sign -i flash.bin -k privatekey -a sha256,rsa4096 -f fit.fit fit and to this one if it's need to be extracted, signed with key and put it back in image: binman sign -i flash.bin -k privatekey -a sha256,rsa4096 fit Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
2023-03-14binman: add documentation for binman sign optionIvan Mikhaylov1-0/+47
Add the documentation about binman sign option and providing an example. Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Add a section about 'binman sign' at the bottom: Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-14Merge tag 'v2023.04-rc4' into nextTom Rini9-5/+120
Prepare v2023.04-rc4 Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-13tools: relocate-rela: add support for handling 32-bit big endian filesOvidiu Panait1-16/+16
Currently, a microblaze build with CONFIG_SYS_BIG_ENDIAN=y and CONFIG_STATIC_RELA=y fails with: tools/relocate-rela: Not supported machine type ELF decoding failed make[2]: *** [u-boot/Makefile:1306: u-boot-nodtb.bin] Error 1 To fix this, convert the 32-bit codepath to use the previously added elf{16,32}_to_cpu() functions. The aarch64 codepath is left untouched. This commit ensures that CI doesn't fail for the next patches which enable runtime relocation by default for microblaze. Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Link: https://lore.kernel.org/r/20230311173838.521804-3-ovpanait@gmail.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-13tools: relocate-rela: introduce elf16_to_cpu() and elf32_to_cpu()Ovidiu Panait1-0/+20
Add elf16_to_cpu() and elf32_to_cpu() functions that allow to read data in both big-endian and little-endian formats. Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Link: https://lore.kernel.org/r/20230311173838.521804-2-ovpanait@gmail.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-13tools: relocate-rela: adjust le64_to_cpu -> le32_to_cpu in decode_elf32()Ovidiu Panait1-3/+3
The sh_addr/sh_offset/sh_size fields in Elf32_Shdr are 32-bits wide, so use le32_to_cpu() instead of the 64-bit variant. Fixes: 5e0e1a86d327 ("tools: relocate-rela: Fix ELF decoding on big-endian hosts") Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ovidiu Panait <ovpanait@gmail.com> Link: https://lore.kernel.org/r/20230311173838.521804-1-ovpanait@gmail.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-03-08binman: Support generation of x509 certificatesSimon Glass7-0/+333
And a new entry type which supports generation of x509 certificates. This uses a new 'openssl' btool with just one operation so far. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08binman: Support updating section contentsSimon Glass10-15/+287
Implement this feature since it is useful for updating FITs within an image. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08binman: Handle missing bintools correctly in fitSimon Glass2-1/+11
At present these are handled as if they are allowed to be missing, but this is only true if the -M flag is provided. Fix this and add a test. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08binman: Allow preserving the output dir when replacingSimon Glass3-7/+20
Add these flags for the 'replace' subcommand too, to aid debugging. Signed-off-by: Simon Glass <sjg@chromium.org> 44 2023 -0700
2023-03-08buildman: Correct CROSS_COMPILE output for sandboxSimon Glass1-2/+1
At present, 'buildman -A sandbox' adds the path containing the toolchain at present. We can assume that this is in the path and we don't want to set CROSS_COMPILE=/bin/ so change this to align with what MakeEnvironment() does. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08patman: Check patches in parallelSimon Glass1-20/+26
For large series this can take a while. Run checkpatch in parallel to try to reduce the time. The checkpatch information is still reported in sequential order, so a very slow patch at the start can still slow things down. But overall this gives good results. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2023-03-08patman: Run get_maintainer.pl in parallelSimon Glass2-3/+32
This script can take ages on some series. Try to limit the time by using threads. If a few stubborn patches remain, show progress so the user has some idea what is going on. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2023-03-08patman: Refactor MakeCcFile() into two functionsSimon Glass1-24/+57
This function is quite long. Moving the handling of a commit into a separate function. This will make it easier to do the work in parallel. Update function comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2023-03-08patman: Drop an incorrect comment about git amSimon Glass1-1/+1
Patman does not do this anymore, as of this commit: 7428dc14b0f ("patman: Remove the -a option") Drop the comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2023-03-08doc: Add notes on how to install patman and binmanSimon Glass2-0/+25
These can be installed with 'pip' now. Add the details for those who are interested. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08binman: Add support for building a binmanu PyPi packageSimon Glass1-0/+29
Create the necessary files to build this new package. It is not actually clear whether this is useful, since buildman has no purpose outside U-Boot. Move the main program into a function so that it can easily be called by the PyPi-created script. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08binman: Use importlib to find the helpSimon Glass1-3/+3
Use this function so that the help can be found even when binman is running from a package. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08binman: Hide the 'test' command unless test code is availableSimon Glass1-13/+21
It doesn't make much sense to expose tests when dtoc is running outside of the U-Boot git checkout. Hide the option in this case. Fix a long line while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08binman: Move the main code into a functionSimon Glass1-4/+8
Put this code into a function so it is easy for it be run when packaged. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08dtoc: Add support for building a dtoc PyPi packageSimon Glass2-0/+41
Create the necessary files to build this new package. This is needed for binman. Move the main program into a function so that it can easily be called by the PyPi-created script. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08dtoc: Use pathlib to find the test directorySimon Glass1-2/+4
Update this so that the directory being used is declared at the top of the file. Use pathlib as it seems to be more modern. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08dtoc: Move the main code into a functionSimon Glass1-48/+52
Put this code into a function so it is easy for it be run when packaged. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08dtoc: Hide the test options unless test code is availableSimon Glass1-6/+13
It doesn't make much sense to expose tests when dtoc is running outside of the U-Boot git checkout. Hide the option in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08buildman: Add support for building a buildman PyPi packageSimon Glass1-0/+29
Create the necessary files to build this new package. It is not actually clear whether this is useful, since buildman has no purpose outside U-Boot. It is included for completeness, since adding this later would be more trouble. Move the main program into a function so that it can easily be called by the PyPi-created script. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08buildman: Use importlib to find the helpSimon Glass1-3/+3
Use this function so that the help can be found even when buildman is running from a package. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08buildman: Fix use of a type as a variableSimon Glass1-2/+2
Using 'str' as a variable makes it impossible to use it as a type in the same function. Fix this by using a different name. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08buildman: Hide the test options unless test code is availableSimon Glass1-4/+10
It doesn't make much sense to expose tests when buildman is running outside of the U-Boot git checkout. Hide the option in this case Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08buildman: Move the main code into a functionSimon Glass1-11/+16
Put this code into a function so it is easy for it be run when packaged. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08patman: Add support for building a patman PyPi packageSimon Glass1-0/+29
Create the necessary files to build this new package. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08patman: Avoid importing test_checkpatch before it is neededSimon Glass1-1/+1
Tests are not packaged with patman so this file will not be accessible when installing with pip. Move the import later in the file, when we know the file is present. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08patman: Add support for building a u_boot_tools PyPi packageSimon Glass3-0/+376
Create the necessary files to build this new package. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08patman: Move library functions into a library directorySimon Glass85-150/+180
The patman directory has a number of modules which are used by other tools in U-Boot. This makes it hard to package the tools using pypi since the common files must be copied along with the tool that uses them. To address this, move these files into a new u_boot_pylib library. This can be packaged separately and listed as a dependency of each tool. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08Remove concurrencytestSimon Glass5-221/+2
While our version is better, it is tricky to use it when we are trying to package things with pip. Drop it. Somewhat reduced functionality is provided by the upstream version[1], along with a rather annoying message each time it is used[2] [3]. [1] pip install concurrencytest [2] https://github.com/cgoldberg/concurrencytest/issues/12 [3] https://github.com/cgoldberg/concurrencytest/pull/14 Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-10-10 10:09:20 +0000