aboutsummaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2021-01-05Makefile: Use common args for dtocSimon Glass1-2/+5
At present the dtoc commmand line is repeated twice in the Makefile. Use a variable to avoid this, so it is easier to add more conditional arguments. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05Makefile: Tidy up SPL dtb productionSimon Glass1-3/+4
Use the SPL_NAME variable to simplify the rules. Drop the SPL targets clean-files since the SPL and TPL dts/ directories are removed by existing rules. Move the SPL rules into a new spl_dtbs to avoid the complicated $(if) construct. Also drop unused pieces from the 'targets' variable. With this, SPL and TPL have separate dtbs which respect the various u-boot,dm-spl / u-boot,dm-tpl tags. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05Makefile: Build SPL dtbs in the spl/ directorySimon Glass1-1/+1
Rather than putting these in the top-level dts/ directory (which is intended for U-Boot proper), put them in the correct subdirectory for SPL (either spl/ or tpl/). This is where other SPL targets are kept, so this is more consistent. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05Makefile: Build a separate .dtb for TPLSimon Glass1-1/+3
At present both SPL and TPL use the same devicetree binary. While there is logic to run fdtgrep separately on each one, it does not actually happen. Add a new TPL rule and use that instead. Make this rule conditional on there actually being a TPL. Do the same for SPL for consistency. Note that the SPL and TPL dtbs are build by a Makefule rule used for U-Boot proper. This is the 'dtbs' target in dts/Makefile. So the check for CONFIG_TPL_BUILD in cmd_fdtgrep never actually works at present. We don't support CONFIG_OF_EMBED for TPL at present. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13checkpatch: Add warnings for unexpected struct namesSimon Glass1-0/+38
As a way of keeping the driver declarations more consistent, add a warning if the struct used does not end with _priv or _plat. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2Patrick Delaunay1-1/+0
Move CONFIG_SYS_PROMPT_HUSH_PS2 in Kconfig, depending on CONFIG_HUSH_PARSER, and remove the default value defined in cli_hush.c under __U_BOOT__. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-20microblaze: Remove CONFIG_SYS_FDT_SIZEMichal Simek1-1/+0
CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-10libfdt: Fix signedness comparison warningsWIP/10Nov2020Andre Przywara6-29/+42
This is a combination of upstream libfdt commits to fix warnings about comparing signed and unsigned integers: ========== scripts/dtc/libfdt/fdt.c: In function ‘fdt_offset_ptr’: scripts/dtc/libfdt/fdt.c:137:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if ((absoffset < offset) ... ========== For a detailed description of the fixes, see the dtc repo: https://git.kernel.org/pub/scm/utils/dtc/dtc.git/log/?id=73e0f143b73d808 For this patch the commits between 73e0f143b73d8088 and ca19c3db2bf62000 have been combined and adjusted for the slight differences in U-Boot's libfdt code base. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2020-11-04arch: Move NEEDS_MANUAL_RELOC symbol to KconfigWIP/04Nov2020Michal Simek1-1/+0
CONFIG_NEEDS_MANUAL_RELOC macro was out of Kconfig. Move it there to be able to use compile-time checks to reduce the number of build paths. Fixes: f9a882438966 ("dm: core: Convert #ifdef to if() in root.c") for Microblaze Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-29Makefile: Generate a symbol file for u-boot-splSimon Glass1-1/+6
Add a rule to generate u-boot-spl.sym so that pytest can discover the available unit tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29dm: test: Build tests for SPLSimon Glass1-0/+1
We want to run unit tests in SPL. Add a new Kconfig to control this and enable it for sandbox_spl Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-26eb_cpu5282: fix CONFIG_DM_VIDEO build warningsAnatolij Gustschin1-1/+0
Remove CONFIG_VIDEO dependency to fix board removal warnings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Jens Scharsig <esw@bus-elektronik.de>
2020-10-23Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsungWIP/23Oct2020Tom Rini1-1/+0
2020-10-22rtc: move pcf8563 to KconfigHeiko Schocher1-1/+0
add Kconfig option for pcf8563 driver and run tools/moveconfig.py Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-18configs: migrate CONFIG_BMP_16/24/32BPP to defconfigsPatrick Delaunay1-3/+0
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay1-1/+0
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigsPatrick Delaunay1-1/+0
Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-15Remove whitelist entry CONFIG_DEFAULT_CONSOLEAndre Heider1-1/+0
There're no users left. Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-14checkpatch.pl: Make CONFIG_IS_ENABLED(CONFIG_*) an errorAlper Nebi Yasak1-0/+6
CONFIG_IS_ENABLED() takes the kconfig name without the CONFIG_ prefix, e.g. CONFIG_IS_ENABLED(CLK) for CONFIG_CLK. Make including the prefix an error in checkpatch.pl so calls in the wrong format aren't accidentally reintroduced. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-05configs: Resync with savedefconfigTom Rini1-7/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-22libfdt: Detected out-of-space with fdt_finish()Simon Glass1-1/+2
At present the Python sequential-write interface can produce an error when it calls fdt_finish(), since this needs to add a terminating tag to the end of the struct section. Fix this by automatically expanding the buffer if needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-27scripts/setlocalversion: sync with linux 5.8Rasmus Villemoes1-17/+26
The linux changes since v3.16 are 78283edf2c01 kbuild: setlocalversion: print error to STDERR b24413180f56 License cleanup: add SPDX GPL-2.0 license identifier to files with no license 6147b1cf1965 scripts/setlocalversion: git: Make -dirty check more robust 8ef14c2c41d9 Revert "scripts/setlocalversion: git: Make -dirty check more robust" ff64dd485730 scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks 7a82e3fa28f1 scripts/setlocalversion: clear local variable to make it work for sh 991b78fbd223 scripts: setlocalversion: fix a bashism 3c96bdd0ebfa scripts: setlocalversion: replace backquote to dollar parenthesis and it's ff64dd485730 that is the motivation for this sync. It fixes false positive "-dirty" added to the version string when building with Yocto (https://lists.openembedded.org/g/openembedded-core/message/137702). There has been one U-Boot specific patch since this was synced with linux 3.16: 81630a3b38c2 (scripts: setlocalversion: safely extract variables from auto.conf using awk). Keep these changes applied. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> [trini: Re-add 81630a3b38c2 and reword message] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-27checkpatch.pl: Make fdt / initrd relocation disabling an errorTom Rini1-0/+6
Entirely disabling relocation of the device tree or initrd is almost never the right answer. Doing this by default leads to hard to diagnose run-time failures. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-26configs: Resync with savedefconfigTom Rini1-1/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-23Convert CONFIG_SYS_DEVICE_NULLDEV to KconfigSimon Glass1-1/+0
This converts the following to Kconfig: CONFIG_SYS_DEVICE_NULLDEV Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass1-4/+0
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini1-2/+0
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06Kconfig: Remove CONFIG_SYS_SRAM_STARTOvidiu Panait1-1/+0
Remove ad-hoc CONFIG_SYS_SRAM_START and use CONFIG_SYS_SRAM_BASE instead. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Convert CONFIG_SYS_SRAM_SIZE to KconfigOvidiu Panait1-1/+0
This converts ad-hoc CONFIG_SYS_SRAM_SIZE to Kconfig. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06Kconfig: Convert CONFIG_SYS_SRAM_BASE to KconfigOvidiu Panait1-1/+0
This converts ad-hoc CONFIG_SYS_SRAM_BASE to Kconfig. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-04Makefile.lib: Build all DTS with -@ if OF_LIBFDT_OVERLAY is enabledMichal Simek1-1/+1
The commit 47818e23a228 ("Makefile.lib: include /__symbols__ in dtb if SPL_LOAD_FIT_APPLY_OVERLAY is enabled") enables DT building as overlays based on symbols which depends on SPL. But there is already an option to apply overlays in full U-Boot too. And there are platforms which are not using SPL and there is no option to build DTs with -@ parameter. That's why change dependency on OF_LIBFDT_OVERLAY which is already symbol which is selected when SPL_LOAD_FIT_APPLY_OVERLAY is enabled but also adding support for platforms which don't enable SPL and want to work with overlays on U-Boot prompt. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-04fixdep: fix coding style in previous fixStephen Warren1-1/+1
Remove a double space introduced by my previous fixdep fix. Fixes: 76ae74d348a0 ("fixdep: fix CONFIG_IS_ENABLED etc. handling") Signed-off-by: Stephen Warren <swarren@nvidia.com>
2020-08-03checkpatch: Don't allow common.h and dm.h in headersSimon Glass1-2/+8
These headers should not be included in other header files. Add a checkpatch rule and test for this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-28Makefile: Rename ALL-y to INPUTS-ySimon Glass1-12/+12
When binman is in use, most of the targets built by the Makefile are inputs to binman. We then need a final rule to run binman to produce the final outputs. Rename the variable to indicate this, and add a new 'inputs' target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-28configs: migrate CONFIG_SPL_LOAD_FIT_ADDRESS to defconfigsPeng Fan1-1/+0
Done with: ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS ./tools/moveconfig.py -S SPL_LOAD_FIT_ADDRESS -H Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: A few more migrations] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28configs: Remove dead CONFIG optionsAdam Ford1-1/+0
BOOTP_DEFAULT is defined in several boards, but this config option is never checked or used. This patch removes this config option from config files and the whitelist.txt Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_BOOTP_SEND_HOSTNAME to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford1-2/+0
This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford1-2/+0
This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28configs: Resync with savedefconfigTom Rini1-69/+0
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini1-1/+0
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27Merge tag 'dm-pull-20jul20-take2a' of ↵Tom Rini1-0/+3
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-27Move eSDHC adapter card identification to board filesYangbo Lu1-1/+0
The eSDHC adapter card identification and multiplexing configuration through FPGA had been implemented in both common mmc driver and fsl_esdhc driver. However it is proper to move these code to board files and do it during board initialization. The FPGA registers are also board specific. This patch is to move eSDHC adapter card identification and multiplexing configuration from mmc driver to specific board files. And the option CONFIG_FSL_ESDHC_ADAPTER_IDENT is no longer needed. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [Rebased, Removed T1040QDS change as board does not exist] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-25net: dc2114x: Add Kconfig entriesMarek Vasut1-1/+0
Add Kconfig entries for the dc2114x driver and convert various boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2020-07-24binman: Adjust pylibfdt for incremental buildSimon Glass1-0/+3
If the pylibfdt shared-object file is detected, then Python assumes that the libfdt.py file exists also. Sometimes when an incremental build aborts, the shared-object file is built but the libfdt.py is not. The only way out at this point is to use 'make mkproper', or similar. Fix this by removing the .so file before it is built. This seems to make Python rebuild everything. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini1-3/+0
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-20binman: Adjust pylibfdt for incremental buildSimon Glass1-0/+3
If the pylibfdt shared-object file is detected, then Python assumes that the libfdt.py file exists also. Sometimes when an incremental build aborts, the shared-object file is built but the libfdt.py is not. The only way out at this point is to use 'make mkproper', or similar. Fix this by removing the .so file before it is built. This seems to make Python rebuild everything. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-07-14 12:55:33 +0000