aboutsummaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2018-07-10board: arm: Add support for Broadcom BCM7445Thomas Fitzsimmons1-0/+4
Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-07-09fdt: Add device tree memory bindingsMichael Pratt1-0/+109
Support a default memory bank, specified in reg, as well as board-specific memory banks in subtree board-id nodes. This allows memory information to be provided in the device tree, rather than hard-coded in, which will make it simpler to handle similar devices with different memory banks, as the board-id values or masks can be used to match devices. Signed-off-by: Michael Pratt <mpratt@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2018-07-02efi_loader: helloworld: Output ACPI configuration tableBin Meng1-0/+4
Output ACPI configuration table if it exists. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-07-02efi_loader: Install ACPI configuration tablesBin Meng2-0/+43
ACPI tables can be passed via EFI configuration table to an EFI application. This is only supported on x86 so far. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-02efi_loader: Increase number of configuration tables to 16Bin Meng1-1/+1
At present the number of configuration tables is set to 2. By looking at which tables the Linux EFI stub or iPXE can process, it looks 16 is a reasonable number. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-06-24efi: stub: Move the use_uart assignment immediately after ↵Bin Meng1-3/+3
exit_boot_services() call The use_uart assignment should follow immediately after the call to exit_boot_services(), in case we want some debug output after that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-24efi.h: Do not use config optionsAlexander Graf1-2/+2
Currently efi.h determines a few bits of its environment according to config options. This falls apart with the efi stub support which may result in efi.h getting pulled into the stub as well as real U-Boot code. In that case, one may be 32bit while the other one is 64bit. This patch changes the conditionals to use compiler provided defines instead. That way we always adhere to the build environment we're in and the definitions adjust automatically. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: added some comments to describe the __x86_64__ check] Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-21efi_loader: Fix GOP 32bpp exposureAlexander Graf1-1/+1
We store pixels as BGRA in memory, as can be seen from struct efi_gop_pixel. So we need to expose the same format to UEFI payloads to actually have them use the correct colors. Reported-by: Fabian Vogt <fvogt@suse.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-19libavb: Update SPDX tag styleTom Rini36-73/+36
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-19rsa: Fix missing memory leak on error in fdt_add_bignum()Simon Glass1-3/+10
Thsi function can fail without freeing all its memory. Fix it. Reported-by: Coverity (CID: 131217) Signed-off-by: Simon Glass <sjg@chromium.org>
2018-06-18avb2.0: integrate avb 2.0 into the build systemIgor Opaniuk3-0/+30
Integrate libavb into the build system. Introduce CONFIG_LIBAVB build option. Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-18avb2.0: add Android Verified Boot 2.0 libraryIgor Opaniuk35-0/+6698
Add libavb lib (3rd party library from AOSP), that implements support of AVB 2.0. This library is used for integrity checking of Android partitions on eMMC. libavb was added as it is and minimal changes were introduced to reduce maintenance cost, because it will be deviated from AOSP upstream in the future. Changes: - license headers changed to conform SPDX-style - avb_crc32.c dropped - updates in avb_sysdeps_posix.c/avb_sysdeps.h For additional details check [1] AVB 2.0 README. [1] https://android.googlesource.com/platform/external/avb/+/master/README.md Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-17efi: stub: Pass EFI GOP information to U-Boot payloadBin Meng1-0/+15
If UEFI BIOS has the graphics output protocol (GOP), let's pass its information to U-Boot payload so that U-Boot can utilize it (eg: an EFI framebuffer driver). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-17x86: use EFI calling convention for efi_main on x86_64Ivan Gorinov2-2/+4
UEFI specifies the calling convention used in Microsoft compilers; first arguments of a function are passed in (%rcx, %rdx, %r8, %r9). All other compilers use System V ABI by default, passing first integer arguments of a function in (%rdi, %rsi, %rdx, %rcx, %r8, %r9). These ABI also specify different sets of registers that must be preserved across function calls (callee-saved). GCC allows using the Microsoft calling convention by adding the ms_abi attribute to a function declaration. Current EFI implementation in U-Boot specifies EFIAPI for efi_main() in the test apps but uses default calling convention in lib/efi. Save efi_main() arguments in the startup code on x86_64; use EFI calling convention for _relocate() on x86_64; consistently use EFI calling convention for efi_main() everywhere. Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2018-06-14Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini2-0/+18
Patch queue for efi - 2018-06-14 A few minor fixes for the release: - Compile fixes - HI20 relocations for RISC-V - Fix bootefi without load path - Fix Runtime Services with certain compilers
2018-06-14efi: Add a comment about duplicated ELF constantsSimon Glass1-0/+4
These constants are defined in arch-specific code but redefined here. Add a TODO to clean this up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-14riscv: Add support for HI20 PE relocationsAlexander Graf1-0/+14
The PE standard allows for HI20/LOW12 relocations. Within the efi_loader target we always know that our relocation target is 4k aligned, so we don't need to worry about the LOW12 part. This patch adds support for the respective relocations. With this and a few grub patches I have cooking in parallel I'm able to run grub on RISC-V. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-13Merge git://git.denx.de/u-boot-x86Tom Rini2-5/+9
2018-06-13lib: Add hexdumpAlexey Brodkin4-14/+255
Often during debugging session it's very interesting to see what data we were dealing with. For example what we write or read to/from memory or peripherals. This change introduces functions that allow to dump binary data with one simple function invocation like: ------------------->8---------------- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); ------------------->8---------------- which gives us the following: ------------------->8---------------- 00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35 ....baudrate=115 00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e 200.bootargs=con 00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30 sole=ttyS3,11520 00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00 0n8.bootdelay=3. 00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00 bootfile=uImage. 00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39 fdtcontroladdr=9 00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72 ffb1ba0.loadaddr 00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65 =0x82000000.stde 00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 rr=serial0@e0022 00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c 000.stdin=serial 000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75 0@e0022000.stdou 000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30 t=serial0@e00220 000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.............. ... ------------------->8---------------- Source of hexdump.c was copied from Linux kernel v4.7-rc2. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Mario Six <mario.six@gdsys.cc> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Stefan Roese <sr@denx.de>
2018-06-13x86: efi: payload: Minor clean up on error message outputBin Meng1-3/+5
If GetMemoryMap() fails, we really want to know EFI_BITS_PER_LONG instead of BITS_PER_LONG. A space and LF are added in places where error message is output to improve readability. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13x86: efi: payload: Enforce toolchain to generate 64-bit EFI payload stub codesBin Meng1-2/+4
Attempting to use a toolchain that is preconfigured to generate code for the 32-bit architecture (i386), for example, the i386-linux-gcc toolchain on kernel.org, to compile the 64-bit EFI payload does not build. This updates the makefile fragments to ensure '-m64' is passed to toolchain when building the 64-bit EFI payload stub codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-03SPDX: Fixup tags from latest EFI PRTom Rini1-2/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-03efi_loader: Fix warning in raw/cols queryAlexander Graf1-1/+1
The code to determine rows / cols on the screen could potentially run into a case where it doesn't know how big the screen is. In that case, assume 80x25. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: create handles from normal memoryHeinrich Schuchardt1-7/+6
Handles are not used at runtime. They are freed by the firmware when the last protocol interface is uninstalled. So there is no reason to use EFI memory when creating handles. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: efi_mem_carve_out should return s64Heinrich Schuchardt1-14/+18
efi_mem_carve_out() is used to remove memory pages from a mapping. As the number of pages to be removed is a 64bit type the return type should be 64bit too. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: avoid anonymous constants for AllocatePagesHeinrich Schuchardt1-3/+5
Do not use anonymous constants when calling efi_allocage_pages. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_selftest: check for buffer overflow in efi_get_variableIvan Gorinov1-1/+17
Allocate a buffer on the stack instead of an array of uninitialized pointers; check if GetVariable writes past the end of the buffer. Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_selftest: imply FAT, FAT_WRITEHeinrich Schuchardt1-0/+2
efi_selftest_block_device accesses a FAT file system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: DocBook comments for boot servicesHeinrich Schuchardt1-396/+436
With 'make htmldocs' we can generate a documentation if the function comments follow the DocBook conventions. This patch adjusts the comments for EFI boot services and provides the DocBook template for the EFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi: Update some comments related to smbios tablesSimon Glass1-1/+6
Clarify the operation of this code with some additional comments. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_selftest: test unaligned memory accessHeinrich Schuchardt2-0/+71
According to the UEFI spec unaligned memory access should be enabled on CPUs supporting it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_selftest: test ReinstallProtocolInterfaceHeinrich Schuchardt1-3/+32
Add a test for ReinstallProtocolInterface to the controller selftest. As ReinstallProtocolInterface has to connect controllers to the new interface is does not fit to the manage protocols selftest. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: implement ReinstallProtocolInterfaceHeinrich Schuchardt1-23/+43
The ReinstallProtocolInterface boot time service is implemented. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: check interface when uninstalling protocolHeinrich Schuchardt1-0/+2
The interface has to be checked in UninstallProtocolInterface. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_selftest: correct efi_selftest_manageprotocolsHeinrich Schuchardt1-1/+1
Pass the correct interface when uninstalling a protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: fix off-by-one bug in efi_get_variableIvan Gorinov1-24/+16
efi_get_variable() always stores an extra zero byte after the output data. When the returned data size matches the output buffer size, the extra zero byte is stored past the end of the output buffer. Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: avoid using unitialized values as console sizeHeinrich Schuchardt1-2/+12
If a request for the console size would be answered with a response with less then three values, uninitialized stack memory would be copied to the number of rows and columns of the terminal. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_selftest: unit test for variable servicesHeinrich Schuchardt2-0/+181
Provide a unit test for variable services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: adjust definitions of variable servicesHeinrich Schuchardt3-22/+22
The definitons of the variable services are adjusted: - use efi_uintn_t instead of unsigned long - use u16 * instead of s16 * for Unicode strings - correct definition of QueryVariableInfo - rename efi_get_next_variable to efi_get_next_variable_name Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: always check parameters in efi_cout_query_mode()Heinrich Schuchardt1-42/+48
If we cannot determine the size of the serial terminal we still have to check the parameters of efi_cout_query_mode(). Querying the size of the serial terminal drains the keyboard buffer. So make sure we do this during the initialization and not in the midst of an EFI application. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_selftest: updating the cursor positionHeinrich Schuchardt1-0/+78
The test case for text output is updated to check correct updating of the cursor position. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: updating the cursor positionHeinrich Schuchardt1-8/+19
The current coding advances the column by the number of UTF-8 bytes. The column should be increased by one per unicode character. The UEFI spec provides advance rules for U+0000, U+0008, U+000A, and U000D. All other characters, including control characters U+0007 (bel) and U+0009 (tab), have to increase the column by one. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: remove unnecessary includeHeinrich Schuchardt4-4/+0
asm/global_data.h is already included via common.h. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: if EFI_LOADER is enabled, enable CFB_CONSOLE_ANSIHeinrich Schuchardt1-0/+1
EFI applications like GRUB issue ANSI sequences for setting colors and for positioning. So if the EFI subsystem is enabled, we should also enable ANSI control sequences by default. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-03efi_loader: correctly apply relocations from the .reloc sectionIvan Gorinov1-3/+11
Instead of difference between preferred and actual image base, the actual base is added to the fields specified in the .reloc section. Use ImageBase from PE optional header to compute the delta, exit early if the image is loaded at the preferred address. Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-06-01Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini3-0/+273
2018-05-31scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987Rob Herring1-9/+9
This adds the following commits from upstream: aadd0b65c987 checks: centralize printing of property names in failure messages 88960e398907 checks: centralize printing of node path in check_msg f1879e1a50eb Add limited read-only support for older (V2 and V3) device tree to libfdt. 37dea76e9700 srcpos: drop special handling of tab 65893da4aee0 libfdt: overlay: Add missing license 962a45ca034d Avoid installing pylibfdt when dependencies are missing cd6ea1b2bea6 Makefile: Split INSTALL out into INSTALL_{PROGRAM,LIB,DATA,SCRIPT} 51b3a16338df Makefile.tests: Add LIBDL make(1) variable for portability sake 333d533a8f4d Attempt to auto-detect stat(1) being used if not given proper invocation e54388015af1 dtc: Bump version to v1.4.6 a1fe86f380cb fdtoverlay: Switch from using alloca to malloc c8d5472de3ff tests: Improve compatibility with other platforms c81d389a10cc checks: add chosen node checks e671852042a7 checks: add aliases node checks d0c44ebe3f42 checks: check for #{size,address}-cells without child nodes 18a3d84bb802 checks: add string list check for *-names properties 8fe94fd6f19f checks: add string list check 6c5730819604 checks: add a string check for 'label' property a384191eba09 checks: fix sound-dai phandle with arg property check b260c4f610c0 Fix ambiguous grammar for devicetree rule fe667e382bac tests: Add some basic tests for the pci_bridge checks 7975f6422260 Fix widespread incorrect use of strneq(), replace with new strprefixeq() fca296445eab Add strstarts() helper function cc392f089007 tests: Check non-matching cases for fdt_node_check_compatible() bba26a5291c8 livetree: avoid assertion of orphan phandles with overlays c8f8194d76cc implement strnlen for systems that need it c8b38f65fdec libfdt: Remove leading underscores from identifiers 3b62fdaebfe5 Remove leading underscores from identifiers 2d45d1c5c65e Replace FDT_VERSION() with stringify() 2e6fe5a107b5 Fix some errors in comments b0ae9e4b0ceb tests: Correct warning in sw_tree1.c Commit c8b38f65fdec upstream ("libfdt: Remove leading underscores from identifiers") changed the multiple inclusion define protection, so the kernel's libfdt_env.h needs the corresponding update. Signed-off-by: Rob Herring <robh@kernel.org> [ Linux commit: 9130ba884640328bb78aaa4840e5ddf06ccafb1c ] [erosca: - Fixup conflicts in include/linux/libfdt_env.h caused by v2018.03-rc4 commit b08c8c487083 ("libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>") - Fix build errors in lib/libfdt/fdt_ro.c, tools/libfdt/fdt_rw.c by: - s/_fdt_mem_rsv/fdt_mem_rsv_/ - s/_fdt_offset_ptr/fdt_offset_ptr_/ - s/_fdt_check_node_offset/fdt_check_node_offset_/ - s/_fdt_check_prop_offset/fdt_check_prop_offset_/ - s/_fdt_find_add_string/fdt_find_add_string_/] Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-30mmc: Separate "mmc swrite" from fastbootAlex Kiernan3-0/+273
Introduce CONFIG_IMAGE_SPARSE and CONFIG_CMD_MMC_SWRITE so the "mmc swrite" command is separated from the fastboot code. Move image-sparse from common to lib so it's clear it's library code. Rename CONFIG_FASTBOOT_FLASH_FILLBUF_SIZE to CONFIG_IMAGE_SPARSE_FILLBUF_SIZE and migrate it to Kconfig. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-29efi_loader: Enable RISC-V supportRick Chen2-4/+35
We have almost all pieces needed to support RISC-V UEFI binaries in place already. The only missing piece are ELF relocations for runtime code and data. This patch adds respective support in the linker script and the runtime relocation code. It also allows users to enable the EFI_LOADER configuration switch on RISC-V platforms. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-29efi_loader: Use EFI_CACHELINE_SIZE in the image loader tooAlexander Graf2-8/+1
We were using our EFI_CACHELINE_SIZE define only in the runtime service code, but left the image loader to use plain CONFIG_SYS_CACHELINE_SIZE. This patch moves EFI_CACHELINE_SIZE into efi_loader.h and converts the image loader to use it. Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.1 at 2024-09-16 12:13:04 +0000