aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2017-05-08dm: Simple Watchdog uclassmaxims@google.com2-0/+108
This is a simple uclass for Watchdog Timers. It has four operations: start, restart, reset, stop. Drivers must implement start, restart and stop operations, while implementing reset is optional: It's default implementation expires watchdog timer in one clock tick. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08igep003x: Add netboot supportPau Pajuelo1-1/+12
netboot allows to boot an external image using TFTP and NFS protocols Signed-off-by: Pau Pajuelo <ppajuelo@iseebcn.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
2017-05-08igep003x: Add support for IGEP SMARC AM335xPau Pajuelo1-3/+12
The IGEP SMARC AM335x is an industrial processor module with following highlights: o AM3352 TI processor (Up to AM3359) o Cortex-A8 ARM CPU o SMARC form factor module o Up to 512 MB DDR3 SDRAM / 512 MB FLASH o WiFi a/b/g/n and Bluetooth v4.0 on-board o Ethernet 10/100/1000 Mbps and 10/100 Mbps controller on-board o JTAG debug connector available o Designed for industrial range purposes Signed-off-by: Pau Pajuelo <ppajuelo@iseebcn.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
2017-05-08igep003x: UBIizeLadislav Michl1-18/+27
Convert IGEP board to use UBI volumes for U-Boot, its environment and kernel. With exception of first four sectors read by SoC BootROM whole NAND is UBI managed. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Heiko Schocher<hs@denx.de> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
2017-05-08igep0033: Rename to igep003xLadislav Michl1-6/+3
Rename igep0033 to igep003x as IGEP SMARC AM335x module (igep0034) can use the same source files. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
2017-05-08stm32f7: remove not needed configuration from board configVikas Manocha1-3/+0
This patch removes: - CONFIG_CMD_MEM: enabled by default - CONFIG_DESIGNWARE_ETH : not being used anywhere. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: sdram: correct sdram configuration as per micron sdramVikas Manocha2-7/+9
Actually the sdram memory on stm32f746 discovery board is micron part MT48LC_4M32_B2B5_6A. This patch does the modification required in the device tree node & driver for the same. Also we are passing here all the timing parameters in terms of clock cycles, so no need to convert time(ns or ms) to cycles. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: enable board info read from device treeVikas Manocha1-0/+1
Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: stm32f746-disco: read memory info from device treeVikas Manocha1-5/+1
Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f746: to switch on user LED1 & read user buttonVikas Manocha1-0/+1
All discovery boards have one user button & one user LED. Here we are just reading the button status & switching ON the user LED. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08stm32f7: use stm32f7 gpio driver supporting driver modelVikas Manocha1-1/+0
With this gpio driver supporting DM, there is no need to enable clocks for different gpios (for pin muxing) in the board specific code. Need to increase the allocatable area required before relocation from 0x400 to 0xC00 becuase of 10 new gpio devices(& new gpio class) added in device tree. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08stm32f7: sdram: use sdram device tree node to configure sdram controllerVikas Manocha1-0/+34
Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
2017-05-08spl: make image arg or fdt blob address reconfigurableVikas Manocha1-3/+2
At present fdt blob or argument address being passed to kernel is fixed at compile time using macro CONFIG_SYS_SPL_ARGS_ADDR. FDT blob from different media like nand, nor flash are copied to the address pointed by the macro. The problem is, it makes args/fdt blob compulsory to copy which is not required in cases like for NOR Flash. This patch removes this limitation. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-05-08arm: am57xx: cl-som-am57x: fix USB scanUri Mashiach1-2/+2
USB bus scan attempt: ----------------------------------cut---------------------------------- => usb start starting USB... USB0: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus 0 for devices... data abort pc : [<fff6240e>] lr : [<fff623b3>] reloc pc : [<8081b40e>] lr : [<8081b3b3>] sp : fdf42930 ip : fdf42960 fp : 00000000 r10: 00000001 r9 : fdf42ef0 r8 : 48890020 r7 : 00000002 r6 : fffa5840 r5 : fff8b140 r4 : fdf429c0 r3 : 00000000 r2 : 00000004 r1 : 00000000 r0 : 00000000 Flags: nZcv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... ----------------------------------cut---------------------------------- Fix by enabling USB configuration in the SPL. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Grinberg <grinberg@compulab.co.il>
2017-05-08arm: usb: dra7xx: xHCI registers based on USB port indexUri Mashiach1-2/+4
Modify the determination of the base address of xHCI registers of DRA7XX targets. Before the commit: by the target. After the commit: by the USB port index. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2017-05-08arm: dra7xx: move CONFIG_DRA7XX to KconfigUri Mashiach3-6/+0
The symbol CONFIG_DRA7XX is needed for Kconfig conditions. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-05meson: gxbb: increase CONFIG_SYS_BOOTM_LENxypron.glpk@gmx.de1-0/+2
A feature rich Linux kernel needs more than 8 MiB. Hence enlarge CONFIG_SYS_BOOTM_LEN to 64 MiB for the GXBB systems. As all known GXBB systems have at least 512 MiB of RAM this poses no problem. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-05-01meson: gxbb: change ramdisk_addr_rxypron.glpk@gmx.de1-1/+1
0x10000000 is the start of a 2 MiB area used by the ARM Trusted Firmware (BL31). See https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/arch/arm64/boot/dts/amlogic/meson-gx.dtsi?id=refs/tags/v4.10.10 So we should not load the ramdisk here. The legacy Ubuntu image for the Odroid C2 comes with the following line in boot.ini: setenv initrd_loadaddr "0x13000000" See http://odroid.in/ubuntu_16.04lts/ubuntu64-16.04-minimal-odroid-c2-20160815.img.xz http://deb.odroid.in/c2/pool/main/u/u-boot/u-boot_20170226-752a100-8_arm64.deb So let's use the same address. With the patch booting Linux with booti succeeds on an Odroid C2, without the patch Linux hangs. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Vagrant Cascadian <vagrant@debian.org>
2017-05-01meson: gxbb: enable MMC as boot targetxypron.glpk@gmx.de1-0/+3
To enable automatic booting from SD card or eMMC the MMC devices 0, 1, and 2 are added to the BOOT_TARGET_DEVICES. Booting from SD card, eMMC, and DHCP are tried in sequence. A missing or failing device is gracefully handled. Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Andreas Färber <afaerber@suse.de>
2017-05-01cmd: add Kconfig option for 'date' commandChris Packham110-129/+0
Signed-off-by: Chris Packham <judge.packham@gmail.com> [trini: default y if DM_RTC, re-sync] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30powerpc: Drop configs/manrolandSimon Glass2-311/+0
This is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30Convert CONFIG_CMD_DISPLAY to KconfigSimon Glass3-3/+0
This converts the following to Kconfig: CONFIG_CMD_DISPLAY Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30Convert CONFIG_CMD_DIAG to KconfigSimon Glass26-33/+0
This converts the following to Kconfig: CONFIG_CMD_DIAG Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_DIAG on some keymile configs] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30Kconfig: Drop CONFIG_CMD_DFLSimon Glass5-5/+0
This option is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30Convert CONFIG_CMD_DEKBLOB to KconfigSimon Glass2-2/+0
This converts the following to Kconfig: CONFIG_CMD_DEKBLOB Note: This option does not seem to actually be enabled by any board. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply under SECURE_BOOT for mx5/6/7] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30Kconfig: Drop CONFIG_CMD_DEFAULTENV_VARSSimon Glass1-1/+0
This option does not exist in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30fs: Convert CONFIG_CMD_CRAMFS to KconfigSimon Glass3-4/+0
This converts the following to Kconfig: CONFIG_CMD_CRAMFS Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CRAMFS for keymile] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30Convert CONFIG_CMD_CLK to KconfigSimon Glass3-3/+0
This converts the following to Kconfig: CONFIG_CMD_CLK Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CLK on ARCH_ZYNQ] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30Drop CONFIG_CMD_CLEARSimon Glass1-2/+0
This option is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30Convert CONFIG_CMD_CHIP_CONFIG to KconfigSimon Glass9-9/+0
This converts the following to Kconfig: CONFIG_CMD_CHIP_CONFIG Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30fs: Convert CONFIG_CMD_CBFS to KconfigSimon Glass2-5/+0
This converts the following to Kconfig: CONFIG_CMD_CBFS Signed-off-by: Simon Glass <sjg@chromium.org> [trini: imply CMD_CBFS on SYS_COREBOOT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30Convert CONFIG_SYS_WHITE_ON_BLACK to KconfigSimon Glass41-82/+0
This converts the following to Kconfig: CONFIG_SYS_WHITE_ON_BLACK Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Make this default y on various SoCs] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30Convert CONFIG_CMD_BSP to KconfigSimon Glass15-15/+0
This converts the following to Kconfig: CONFIG_CMD_BSP Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30Convert CONFIG_CMD_BMP to KconfigSimon Glass56-83/+0
This converts the following to Kconfig: CONFIG_CMD_BMP Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add depends on LCD || DM_VIDEO || VIDEO] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30Convert CONFIG_CMD_BMODE to KconfigSimon Glass28-65/+0
This converts the following to Kconfig: CONFIG_CMD_BMODE Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Make this default y and depend on mx5/6/7] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30Convert CONFIG_CMD_BEDBUG to KconfigSimon Glass5-5/+0
This converts the following to Kconfig: CONFIG_CMD_BEDBUG Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30Convert CONFIG_CMD_BAT to KconfigSimon Glass1-5/+0
This converts the following to Kconfig: CONFIG_CMD_BAT Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30ti816x_evm: Change CONFIG_CMD_ASKEN to CONFIG_CMD_ASKENVSimon Glass1-1/+1
This looks like a typo. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30Convert CONFIG_CMD_AES et al to KconfigSimon Glass3-3/+0
This converts the following to Kconfig: CONFIG_CMD_AES CONFIG_AES Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add select AES to CMD_AES] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30power: Drop CONFIG_PMICSimon Glass1-1/+0
This option is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30power: Drop CONFIG_I2C_PMICSimon Glass1-1/+0
This is only used by one board and should not be a CONFIG option. Instead it should use the driver model pmic framework. For now, just move the setting into the only board that uses it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30power: Convert CONFIG_PMIC_AS3722 to KconfigSimon Glass4-10/+0
This converts the following to Kconfig: CONFIG_PMIC_AS3722 Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30power: Rename CONFIG_AS3722_POWER to CONFIG_PMIC_AS3722Simon Glass4-4/+4
Before converting this to Kconfig, rename it to match the other PMICs. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-30arm: Re-sync ARCH_MX5 / MX51 / MX53 CONFIG optionsTom Rini8-13/+0
A few boards had not been fully re-synced with CONFIG_ARCH_MX5 / CONFIG_MX51 / CONFIG_MX53 being in Kconfig. Do so now. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate KconfigMasahiro Yamada1-1/+1
In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-27clean-up: Remove uselsess mentions of CONFIG_COMMAND_HISTORYAlexey Brodkin8-9/+2
These were reminders that somehow slipped through the cracks or were erroneously introduced after previous clean-ups. Getting rid of then once again. Hopefully for good now :) Where missing and appropriate replace with CONFIG_CMDLINE_EDITING which really enables shell history as of now. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Peter Griffin <peter.griffin@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Steve Rae <steve.rae@raedomain.com> Cc: Jon Mason <jon.mason@broadcom.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-25Merge git://git.denx.de/u-boot-sunxiTom Rini4-7/+221
2017-04-25Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini1-0/+33
2017-04-25arm: socfpga: add cyclone5 based de10-nano boardDalon Westergreen1-0/+33
Add support for the Terasic DE10-Nano board. The board is based on the DE0-Nano-Soc board but adds a larger FPGA and an HDMI output. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2017-04-24Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2-6/+4
generated by cgit v1.1 at 2024-10-09 22:02:58 +0000