aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-03-25Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay126-390/+0
This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASEPatrick Delaunay1-1/+1
Replace CONFIG_ENV_SPI_BASE by the better CONFIG_SYS_SPI_BASE (it is not the location for environment but the location for U-Boot) and, as it is the only platform with use this define, remove it from whitelist. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25controlcenterdc: move some configuration in defconfig filePatrick Delaunay1-6/+0
Move some configurations in defconfig file - CONFIG_CMD_I2C - CONFIG_CMD_SPI This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25bcm7445: move some configuration in defconfig filePatrick Delaunay1-4/+0
Move some configurations in defconfig file - CONFIG_DM_SPI (removed by syncing defconfigs ) - CONFIG_CMD_SF - CONFIG_CMD_SPI - CONFIG_CMD_SF_TEST This allow correct dependency handling in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-22fs: ext4: do not write on filesystem with metadata_csum featureSébastien Szymanski1-0/+1
U-Boot doesn't support metadata_csum feature. Writing to filesystem with metadata_csum feature makes the filesystem corrupted and unbootable by Linux: [ 2.527495] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 0 failed (52188!=0) [ 2.537421] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 1 failed (5262!=0) ... [ 2.653308] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 14 failed (42611!=0) [ 2.662179] EXT4-fs (mmcblk0p2): ext4_check_descriptors: Checksum for group 15 failed (21527!=0) [ 2.687920] JBD2: journal checksum error [ 2.691982] EXT4-fs (mmcblk0p2): error loading journal [ 2.698292] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2): error -74 Don't write to filesystem with meatadata_csum feature to not corrupt the filesystem. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-03-22pci: Add comment to mention difference in DEVFN usage in U-Boot vs LinuxStefan Roese1-0/+11
This patch adds a comment to the header with the PCI_foo macros related to DEVFN to explain the difference in U-Boot vs Linux. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-22cmd: set CONFIG_SYS_HELP_CMD_WIDTH = 10Heinrich Schuchardt1-1/+1
CONFIG_SYS_HELP_CMD_WIDTH is used to format the output of help without any arguments. CONFIG_SYS_HELP_CMD_WIDTH = 8 is too narrow to fit all our commands. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-03-19Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini1-0/+2
2019-03-16arm: socfpga: make SPL_TEXT_BASE overridableSimon Goldschmidt1-0/+2
To boot from fpga on socfpga gen5, we need to set CONFIG_SPL_TEXT_BASE to 0xC0000000 (hps2fpgaslaves base address). Since converting CONFIG_SPL_TEXT_BASE to Kconfig hasn't been successful so far, let's make this value overridable in socfpga_common.h, so that we can have different board configs override this in socfpga_common.h. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-03-15Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini5-3/+7
- DPAA2 fixes and DDR errata workaround for LS1021A
2019-03-15armv7: ls102xa: Add workaround for DDR erratum A-008850Alison Wang2-0/+4
Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-15mc : Reduce MC memory size to 128MMeenakshi Aggarwal3-3/+3
ls2088, ls1088 : minimum MC Memory size is 128 MB lx2 : minimum MC memory size is 256 MB Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-14Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini5-11/+16
2019-03-13ARM: imx6_logic: Fix typo in FDT addressAdam Ford1-4/+4
A few scripts reference 'fdt_addr' when they should reference 'fdt_addr_r' so this patch fixes those broken references. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-03-13include: configs: imx6-engicam: Add recovery boot optionShyam Saini1-0/+11
Combined with watchdog board reset mechanism, this can be used as recovery boot option after bootlimit exceeds the configured value. Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
2019-03-13imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to KconfigFabio Estevam1-1/+0
Currently the command "saveenv" is not available. The CONFIG_ENV_IS_IN_MMC symbol has been converted to Kconfig, so fix the problem by moving it to the defconfig. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-03-13pico-imx6ul: Convert to DM_PMICFabio Estevam1-8/+0
Convert to use DM_PMIC for the PFUZE3000. Since this PMIC is under an I2C bus, conver to DM_I2C as well. Also, since I2C is not used in SPL, remove CONFIG_SPL_I2C_SUPPORT to avoid build warnings. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2019-03-11espresso7420: remove duplicated configMinkyu Kang1-2/+0
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: exynos: Remove duplicated "boardname" env settingKrzysztof Kozlowski2-3/+7
Various places in the code set "boardname" env property. It was used for booting from ITB images and choosing proper DTB file name. Instead of duplicating it, use existing U-Boot wide - "board_name". Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11configs: odroid_xu3: Unify indentationKrzysztof Kozlowski1-5/+5
File mixed space and tab indentation. Unify it. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11configs: odroid_xu3: Use consistent syntax for #includeKrzysztof Kozlowski1-1/+1
When including other header from configs, use consistent <> syntax. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11regulator: Add support for ramp delayKrzysztof Kozlowski1-0/+2
Changing voltage and enabling regulator might require delays so the regulator stabilizes at expected level. Add support for "regulator-ramp-delay" binding which can introduce required time to both enabling the regulator and to changing the voltage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-11arm: exynos: Detect revision later, when all resources are readyKrzysztof Kozlowski1-0/+1
Detection of board revision is done early - before power setup. In case of Odroid XU3/XU4/HC1 family, the detection is done using ADC which is supplied by LDO4/VDD_ADC regulator. This regulator could be turned off (e.g. by kernel before reboot). If ADC is used early, the regulators are not yet available and the detection won't work. Split the revision detection out of set_board_type() into separate function called later - either when displaying board info (in late mode) or during misc_init_r. The idea is that set_board_type() will be called early so its method of detection are limited to flattened device tree (exynos5-dt-types.c for Exynos5) or GPIO (odroid.c for Exynos4412). The newly added set_board_revision() can be called only later, when resources like regulator are available. This is necessary to fix the detection of Odroid HC1 after reboot, if kernel turned off the LDO4 regulator. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-10Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2-3/+8
- Arria10 DRAM fixes and Gen5 cache fixes
2019-03-09ARM: socfpga: Fix Arria10 SPI and NAND U-Boot offsetMarek Vasut1-0/+8
The SPL size on Gen5 is 4*64kiB, but on A10 it is 4*256kiB. Handle the difference. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ARM: socfpga: Drop CONFIG_SYS_NAND_BAD_BLOCK_POSMarek Vasut1-1/+0
This is not used anywhere, so drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ARM: socfpga: Disable D cache in SPLMarek Vasut1-2/+0
The bootrom seems to leave the D-cache in messed up state, make sure the SPL disables it so it can not interfere with operation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ARM: rmobile: rcar-gen3: Activate bootm_sizeEugeniu Rosca1-1/+0
v2019.01 commit 07a8060a1277 ("ARM: rmobile: Convert to bootm_size") attempted converting to bootm_size of 256 MiB below targets: - include/configs/alt.h - include/configs/gose.h - include/configs/koelsch.h - include/configs/lager.h - include/configs/porter.h - include/configs/rcar-gen3-common.h - include/configs/silk.h - include/configs/stout.h The update didn't fully work on R-Car3 due to the CONFIG_SYS_BOOTMAPSZ=8MiB definition left by v2016.09 commit e525d34b476e ("ARM: rmobile: Add support salvator-x board"), which is explained in below README excerpt: ----8<---- CONFIG_SYS_BOOTMAPSZ: [..] If CONFIG_SYS_BOOTMAPSZ is undefined, then the value in "bootm_size" will be used instead. ----8<---- Allow the original commit to accomplish its purpose on R-Car3 targets by removing the CONFIG_SYS_BOOTMAPSZ definition. Fixes: 07a8060a1277 ("ARM: rmobile: Convert to bootm_size") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-03-09ARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{,_FLASH}Marek Vasut1-0/+2
Enable DM_SPI and DM_SPI_FLASH in U-Boot on H2 Stout, M2W Porter and E3 Silk. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-03-08ARM: qemu-arm: enable USB boot in distro boot with UEFIAKASHI Takahiro1-0/+1
With this patch which adds a removable USB mass storage to a list of bootable devices, USB boot is supported in distro boot if UEFI is configured. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-03-03board: Enable DHCP distro boot for LS1012a, LS1021aYunfeng Ding2-3/+5
Enable DHCP distro boot for Layerscape LS1012A and LS1021A. Signed-off-by: Yunfeng Ding <yunfeng.ding@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03fsl_sec: fix register layout on Layerscape architecturesLaurentiu Tudor1-0/+8
On Layerscape architectures the SEC memory map is 1MB and the register blocks contained in it are 64KB aligned, not 4KB as the ccsr_sec structure currently assumes. Fix the layout of the structure for these architectures. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Reviewed-by: Bharat Bhushan <bharat.bhushan@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03configs: fsl: move DDR specific defines to KconfigRajesh Bhagat38-60/+0
Moves below DDR specific defines to Kconfig: CONFIG_FSL_DDR_BIST CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE CONFIG_FSL_DDR_INTERACTIVE CONFIG_FSL_DDR_SYNC_REFRESH Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1043a: use default scan_dev_for_bootMian Yousaf Kaukab1-6/+0
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1043a: enable dhcp bootMian Yousaf Kaukab1-1/+2
dhcp boot is a useful feature and works out-of-the-box on these platforms. Enable it as a boot source. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1046a: use default scan_dev_for_bootMian Yousaf Kaukab1-7/+0
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1046a: enable dhcp bootMian Yousaf Kaukab1-1/+2
dhcp boot is a useful feature and works out-of-the-box on these platforms. Enable it as a boot source. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls2080ardb: use default scan_dev_for_bootMian Yousaf Kaukab1-12/+0
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03Revert "ls2080ardb: remove dhcp function from env as boot source"Mian Yousaf Kaukab1-1/+2
dhcp boot is a useful feature and works out-of-the-box for ls2088a platforms. Moreover, no solid reason is given for disabling it. Revert the patch to re-enable it. This reverts commit aea5cd75e63c20de4c00ce24a93eeee8542f923e. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03board: ls1088ardb: use default scan_dev_for_bootMian Yousaf Kaukab1-12/+0
Default environment variable is more complete. Also scans for efi binaries for example. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-03-03Revert "ls1088a: remove dhcp function from u-boot env as boot source"Mian Yousaf Kaukab1-1/+2
dhcp boot is a useful feature and works out-of-the-box for ls1088a platforms. Moreover, no solid reason is given for disabling it. Revert the patch to re-enable it. This reverts commit 863e42e8b1f9e97d87919e20e34a7b98089f7522. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-27riscv: Add SiFive FU540 board supportAnup Patel1-0/+43
This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-27clk: Add SiFive FU540 PRCI clock driverAnup Patel1-0/+29
Add driver code for the SiFive FU540 PRCI IP block. This IP block handles reset and clock control for the SiFive FU540 device and implements SoC-level clock tree controls and dividers. Based on code written by Wesley Terpstra <wesley@sifive.com> found in commit 999529edf517ed75b56659d456d221b2ee56bb60 of: https://github.com/riscv/riscv-linux Boot and PLL rate change were tested on a SiFive HiFive Unleashed board. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de>
2019-02-25efi_loader: define load option attributesAKASHI Takahiro1-0/+9
See UEFI specification v2.7a, section 3.1.3, "Load Option Processing." Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-25cmd: env: add "-e" option for handling UEFI variablesAKASHI Takahiro1-0/+8
"env [print|set] -e" allows for handling uefi variables without knowing details about mapping to corresponding u-boot variables. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-02-22preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOTMasahiro Yamada1-2/+0
This is the same migration path as commit b6251db8c3f0 ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). I also moved the description in README to the Kconfig help. I ripped off the sentence about 'LWMON' since it is gone already. I only let my boards migrate, leaving the rest to platform maintainers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-20Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini31-277/+29
2019-02-20Merge git://git.denx.de/u-boot-x86Tom Rini7-11/+255
- Add support for sound. Albeit the big changeset, changes are pretty limited to x86 only and a few new sound drivers used by x86 so I think it would be good to have this in the next release.
2019-02-20Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini8-7/+547
- Support of NXP's LX2160RDB and LX2160QDS platform - Enable SATA DM model for NXP's ARM SoCs
2019-02-20nyan-big: drop CONFIG_KEYBOARDPeter Robinson1-2/+0
The CONFIG_KEYBOARD does nothing as it's legacy and unused so just drop it from the config. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v1.1 at 2024-10-12 17:28:55 +0000