aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29Merge tag 'xilinx-for-v2021.01-v2' of ↵Tom Rini11-18/+262
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.01-v2 common: - Add support for 64bit loadables from SPL xilinx: - Update documentation and record ownership - Enable eeprom board detection based legacy and fru formats - Add support for FRU format microblaze: - Optimize low level ASM code - Enable SPI/I2C - Enable distro boot zynq: - Add support for Zturn V5 zynqmp: - Improve silicon detection code - Enable several kconfig options - Align DT with the latest state - Enabling security commands - Enable and support FPGA loading from SPL - Optimize xilinx_pm_request() calling versal: - Some DTs/Kconfig/defconfig alignments - Add binding header for clock and power zynq-sdhci: - Add support for tap delay programming zynq-spi/zynq-qspi: - Use clock framework for getting clocks xilinx-spi: - Fix some code issues (unused variables) serial: - Check return value from clock functions in pl01x
2020-10-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini2-0/+114
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape platforms. - Add optee_rpmb support for LX2 & Kontron sl28 support
2020-10-29mmc: zynq_sdhci: Add common function to set input/output tapdelaysAshok Reddy Soma1-2/+3
Remove setting tapdelays for different speeds separately. Instead use the ITAP and OTAP delay values which are read from the device tree. If the DT does not contain tap delay values, the predefined values will be used for the same. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-28dm: board: complete the initialization of the muxes in initr_dm()Jean-Jacques Hiblot1-0/+12
This will probe the multiplexer devices that have a "u-boot,mux-autoprobe" property. As a consequence they will be put in their idle state. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
2020-10-28drivers: Add a new framework for multiplexer devicesJean-Jacques Hiblot4-0/+274
Add a new subsystem that handles multiplexer controllers. The API is the same as in Linux. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> [trini: Update some error calls to use different functions or pass correct arguments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-27log: allow for message continuationHeinrich Schuchardt2-0/+14
Some drivers use macro pr_cont() for continuing a message sent via printk. Hence if we want to convert printk messaging to using the logging system, we must support continuation of log messages too. As pr_cont() does not provide a message level we need a means of remembering the last log level. With the patch a pseudo log level LOGL_CONT as well as a pseudo log category LOGC_CONT are introduced. Using these results in the application of the same log level and category as in the previous log message. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27log: move processing_msg to global dataHeinrich Schuchardt1-0/+8
Replace the static variable processing_msg by a field in the global data. Make the field bool at it can only be true or false. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27mmc: Define timing macro'sAshok Reddy Soma1-0/+13
Define timing macro's for all the available speeds of mmc. This is done similar to linux. Replace speed macro's used with these new timing macro's wherever applicable. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-27Revert "mmc: zynq: parse dt when probing"Ashok Reddy Soma1-0/+1
This reverts commit 942b5fc03218d1c94468fc658e7dec65dabcc830. This is partial revert of the above commit. mmc_of_parse() is reading no-1-8-v from device tree and if set, it is clearing the UHS speed capabilities of cfg->host_caps. cfg->host_caps &= ~(UHS_CAPS | MMC_MODE_HS200 | MMC_MODE_HS400 | MMC_MODE_HS400_ES); This is still missing to clear UHS speeds like SDHCI_SUPPORT_SDR104, SDHCI_SUPPORT_SDR50 and SDHCI_SUPPORT_DDR50. Even if we clear the flags SDHCI_SUPPORT_XXX in mmc_of_parse(), these speed flags are getting set again in cfg->host_caps in sdhci_setup_cfg(). The reason for this is, SDHCI_SUPPORT_XXX flags are cleared only if controller is not capable of supporting MMC_VDD_165_195 volts. if (caps & SDHCI_CAN_VDD_180) cfg->voltages |= MMC_VDD_165_195; if (!(cfg->voltages & MMC_VDD_165_195)) caps_1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); It means "no-1-8-v", which is read from DT is not coming in to effect. So it is better we keep the host quirks(SDHCI_QUIRK_NO_1_8_V) to clear UHS speeds based on no-1-8-v from device tree. Hence revert the functionality related to no-1-8-v only, rest is fine in the patch. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-27xilinx: Remove additional newline in config filesMichal Simek3-3/+0
Trivial fix. Fixes: e519f03a1846 ("cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27xilinx: zynq: Change types from u32 to uint32_tMichal Simek1-1/+1
Change parameter type to avoid compilation error: In file included from ./tools/../lib/rsa/rsa-verify.c:23:0, from tools/lib/rsa/rsa-verify.c:1: include/u-boot/rsa-mod-exp.h:69:18: error: unknown type name ‘u32’; did you mean ‘__u32’? int zynq_pow_mod(u32 *keyptr, u32 *inout); ^~~ __u32 include/u-boot/rsa-mod-exp.h:69:31: error: unknown type name ‘u32’; did you mean ‘__u32’? int zynq_pow_mod(u32 *keyptr, u32 *inout); ^~~ __u32 Fixes: 37e3a36a5475 ("xilinx: zynq: Add support to secure images") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27dm: core: Add support for getting node from aliasesMichal Simek1-0/+22
Add support for getting a node/property from aliases. The similar functionality is provided for chosen node and this implemenatation is copy of it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-27dt-bindings: arm64: versal: Add clk and power headersMichal Simek2-0/+165
Add power and reset headers to be sources by Versal dtses. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27microblaze: Add support for distro bootT Karthik Reddy1-2/+47
Add distro boot support for microblaze and enable jtag, qspi, dhcp, pxe boot targets for distro boot. Enable DISTRO_DEFAULTS config in microblaze defconfig and also enable support for spi xilinx driver & spi vendors to access spi flash by distro boot. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27microblaze: trivial code fixesT Karthik Reddy1-9/+10
Set proper indentation for env variables in microblaze header file. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27microblaze: start.S: Use board_init_f_alloc/init in early initOvidiu Panait1-2/+1
Implement early init by calling generic board_init_f_alloc_reserve and board_init_f_init_reserve functions: * drop SYS_MALLOC_F_LEN related code, as allocation and gd->malloc_base assignment are taken care of by the generic functions * drop _gd logic Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-10-26eb_cpu5282: fix CONFIG_DM_VIDEO build warningsAnatolij Gustschin1-4/+0
Remove CONFIG_VIDEO dependency to fix board removal warnings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Jens Scharsig <esw@bus-elektronik.de>
2020-10-23power: regulator: add dummy helperPeng Fan1-0/+114
Add dummy helper to enabling the header could be included when DM REGULATOR not enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-10-23Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsungWIP/23Oct2020Tom Rini16-66/+6
2020-10-23Revert "xen: add definitions for console_io"Tom Rini1-6/+0
This reverts commit 16389a74c516470c8f0fd8c712e1638f80384b92. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-23board: kontron: add sl28 supportMichael Walle1-0/+108
Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux. For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant. In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23pci: add a few ARI related definesLaurentiu Tudor1-0/+6
Add a few defines related to PCI ARI configuration. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-22rtc: move pcf8563 to KconfigHeiko Schocher4-4/+0
add Kconfig option for pcf8563 driver and run tools/moveconfig.py Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22xen: add definitions for console_ioAKASHI Takahiro1-0/+6
Those definitions added are used with HYPERVISOR_console_io(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-10-22reset: ast2500: Use SCU for reset controlChia-Wei, Wang1-34/+39
The System Control Unit (SCU) controller of Aspeed SoCs provides the reset control for each peripheral. This patch refactors the reset method to leverage the SCU reset control. Thus the driver dependency on watchdog including dedicated WDT API and reset flag encoding can be eliminated. The Kconfig description is also updated accordingly. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2020-10-22gpio: fix gpio_request_by_name() descriptionDario Binacchi1-1/+1
Replace 'dev->dev' with '@desc->dev' in the gpio_request_by_name function desc parameter description. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22dm: core: improve uclass_get_device_by_phandle_id() descriptionDario Binacchi1-1/+2
Complete the devp parameter description. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22km/common: change ubicopy variableHolger Brunck1-2/+1
Instead having a hard coded value for "cramfsaddr" after compile time, we change it to take the variable "cramfsaddr" for the ubicopy variable. This makes sure that ubicopy uses the right address, even when the value for "cramfsaddr" has changed. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-10-22km: adapt defines and variables for new memory layoutHolger Brunck4-4/+8
Due to increasing kernel image sizes we get problems when decompressing the kernel image. To fix this we need to change the addresses where we load and where we extract the kernel. Also we need to adapt the address where to load the CRAMFS image and where to load the DTB file. While at it also harmonize all boards for PPC and ARM to have the same values. Also we add a new variable "env_version", so that the userspace is able to detect if this is a u-boot binary with updated values or not. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Remove old values from kmp204x.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-22lib: print_freq() should output kHz not KHzHeinrich Schuchardt1-1/+1
In the International System of Units (SI) the prefix kilo is abbreviated as 'k' not 'K'. 'K' is the symbol for Kelvin. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22km: fix license string and compatible stringsHolger Brunck1-1/+1
As the ownership is now Hitachi Power Grids, change the license string and adapt the compatible string in DTS files. For kmeter1.dts we change it to "keymile,KMETER1" for now, as this is then compliant with what is submitted to the linux kernel. All other boards don't have a upstreamed version in linux mainline. Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Marek Vasut <marex@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-22timer: Return count from timer_ops.get_countSean Anderson1-3/+6
No timer drivers return an error from get_count. Instead of possibly returning an error, just return the count directly. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22doc: Document timer APISean Anderson1-22/+24
This adds kerneldocs for <timer.h>. I don't know who should maintain doc/api/timer.rst, since the timer subsystem seems to be maintained by SoC maintainers. MAINTAINERS is left un-updated for the moment. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22common: rename getc() to getchar()Heinrich Schuchardt2-2/+2
The sandbox is built with the SDL2 library with invokes the X11 library which in turn calls getc(). But getc() in glibc is defined as int getc(FILE *) This does not match our definition. int getc(void) The sandbox crashes when called with parameter -l. Rename our library symbol getc() to getchar(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22cosmetic: image: Fix comments and the order of definitionsNaoki Hayama1-0/+1
Fix some comments about functions. Move genimg_get_comp_name() above genimg_get_short_name() because genimg_get_comp_name() is related to get_table_entry_name(). Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22image: Add a function to modify category informationNaoki Hayama1-0/+9
Add a generic function which can check whether a category has an entry ID. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22log: Add missing category namesSimon Glass1-1/+3
Add some category names that were missed in recent changes. Update the comment as a reminder. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-21Merge tag 'efi-2021-01-rc1-2' of ↵WIP/21Oct2020Tom Rini1-0/+3
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc1 (2) A use after free in the UEFI network stack is fixed.
2020-10-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shWIP/20Oct2020Tom Rini2-0/+86
- Assorted R-Car Gen3 updates
2020-10-20arm: dts: r8a774c0: Import DTS from Linux 5.9Lad Prabhakar2-0/+86
Import R8A774C0 (RZ/G2E) SoC DTSI and headers from Linux 5.9 commit bbf5c979011a ("Linux 5.9"). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
2020-10-20usb: common: add define of usb_speed_string()Chunfeng Yun1-4/+0
There is only declaration of usb_speed_string(), but no definition, so add it to avoid build error when call it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-20usb: add USB_SPEED_SUPER_PLUSChunfeng Yun1-0/+1
Add enum USB_SPEED_SUPER_PLUS for USB3.1 Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-19net: add a define for the number of packets received as batchPatrick Wildt1-0/+3
With a define for the magic number of packets received as batch we can make sure that the EFI network stack caches the same amount of packets. Signed-off-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-19Merge tag 'u-boot-atmel-2021.01-b' of ↵Tom Rini1-1/+2
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features for 2021.01 cycle: This feature set brings the rework of the clock tree for sam9x60 SoC. This makes the clock tree fully compatible with Common Clock Framework and allows full clock configuration in U-Boot. This means that the sam9x60 boards can boot now using U-Boot. This also includes the definitions for sam9x60 SiPs and a divisor fix for the clock on sama7g5 SoC.
2020-10-19board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDRClaudiu Beznea1-1/+2
Heap base address is computed based on SYS_INIT_SP_ADDR by subtracting the SYS_MALLOC_F_LEN value in board_init_f_init_reserve(). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-18configs: migrate CONFIG_BMP_16/24/32BPP to defconfigsPatrick Delaunay37-60/+0
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay35-36/+0
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigsPatrick Delaunay7-7/+0
Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18video: dw-mipi-dsi: permit configuring the escape clock rateNeil Armstrong1-0/+1
The Amlogic D-PHY in the Amlogic AXG SoC Family does support a frequency higher than 10MHz for the TX Escape Clock, thus make the target rate configurable. This is based on the Linux commit [1] and adapted to the U-Boot driver. [1] a328ca7e4af3 ("drm/bridge: dw-mipi-dsi: permit configuring the escape clock rate") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-10-18video: dw-mipi-dsi: driver-specific configuration of phy timingsNeil Armstrong1-0/+16
The timing values for dw-dsi are often dependent on the used display and according to Philippe Cornu will most likely also depend on the used phy technology in the soc-specific implementation. To solve this and allow specific implementations to define them as needed add a new get_timing callback to phy_ops and call this from the dphy_timing function to retrieve the necessary values for the specific mode. This is based on the Linux commit [1] and adapted to the U-Boot driver. [1] 25ed8aeb9c39 ("drm/bridge/synopsys: dsi: driver-specific configuration of phy timings") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit v1.1 at 2024-07-09 19:42:32 +0000