aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-03-03include: configs: j721e_evm: Add env variables for mcu_r5fss0_core0 & ↵Keerthy1-0/+4
main_r5fss0_core0 Add env variables for mcu_r5fss0_core0 & main_r5fss0_core0 firmware loadaddr and name. Signed-off-by: Keerthy <j-keerthy@ti.com>
2020-03-03lib: elf: Move the generic elf loading/validating functions to libKeerthy1-0/+4
Move the generic elf loading/validating functions to lib/ so that they can be re-used and accessed by code existing outside cmd. While at it remove the duplicate static version of load_elf_image_phdr under arch/arm/mach-imx/imx_bootaux.c. Signed-off-by: Keerthy <j-keerthy@ti.com> Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-03configs: j721e_evm: Setup mtdparts for OSPIVignesh Raghavendra1-2/+12
Set up mtdparts cmdline argument to be passed to kernel Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-03-03configs: am65x_evm: Setup mtdparts for OSPIVignesh Raghavendra1-1/+20
Set up mtdparts cmdline argument to be passed to kernel Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-20Merge tag 'u-boot-rockchip-20200220' of ↵Tom Rini3-2/+32
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - rk3399: split roc-pc-rk3399 out of evb_rk3399 - sync dts from upstream kernel for rk3399,rk3288,px30 - boot_mode: find the saradc device name
2020-02-20mmc: add mmc_get_dma_dir() helperMasahiro Yamada1-0/+6
Copied from Linux kernel. include/linux/mmc/host.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20mmc: sdhci: reduce code duplication for aligned bufferMasahiro Yamada1-0/+2
The same code is run for both SDHCI_QUIRK_32BIT_DMA_ADDR and define(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER). Unify the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-20mmc: sdhci: put the aligned buffer pointer to struct sdhci_hostMasahiro Yamada1-0/+1
Using the global variable does not look nice. Add a new field sthci::align_buffer to point to the bounce buffer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-02-19dma-mapping: move dma_map_(un)single() to <linux/dma-mapping.h>Masahiro Yamada1-0/+63
The implementation of dma_map_single() and dma_unmap_single() is exactly the same for all the architectures that support them. Factor them out to <linux/dma-mapping.h>, and make all drivers to include <linux/dma-mapping.h> instead of <asm/dma-mapping.h>. If we need to differentiate them for some architectures, we can move the generic definitions to <asm-generic/dma-mapping.h>. Add some comments to the helpers. The concept is quite similar to the DMA-API of Linux kernel. Drivers are agnostic about what is going on behind the scene. Just call dma_map_single() before the DMA, and dma_unmap_single() after it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-02-19rockchip: rk3399: split roc-pc-rk3399 out of evb_rk3399Suniel Mahesh1-0/+22
roc-pc-rk3399 board has one user button & three user LED's. Currently we don't have any code support for these devices. Since button and LED's are specific to roc-pc-rk3399 board, split it into its own board file and add code support here. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rk3288: vyasa: Add console settingsJagan Teki1-1/+5
Add console settings like stdin, stdout and stderr as cros-ec-keyb and vidconsole respectively for Vyasa Rk3288 board. This would certainly help to detect the attached video devices (like HDMI) and print the console message on display. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19rk3288: tinker: Enable HDMI outputJagan Teki1-1/+5
Enable HDMI output for Tinker RK3288 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-14Merge tag 'u-boot-stm32-20200214' of ↵Tom Rini7-35/+56
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - add DH Electronics DHCOM SoM and PDK2 board - DT alignment with kernel v5.5-rc7 for stm32mp1 boards - fix STM32 image format for big endian hosts in mkimage - solve warnings in device tree and code for stm32mp1 boards - remove fdt_high and initrd_high for stm32 and stih boards - add support of STM32MP15x Rev.Z - update stm32mp1 readme
2020-02-14Merge tag 'ti-v2020.04-rc3' of ↵Tom Rini1-0/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-ti K3 J721E/AM65X: - UART boot fixes for J721E - Enabling debug uart for AM65x DRA7xx/AM57xx: - Preveinting boot from Invalid boot configuration for AM57xx Keysonte2: - Linux Boot fixes for K2 platforms. AM33/AM43/Davinci: - Ethernt boot fixes for AM43XX - USB Host boot fixes for AM43XX
2020-02-13board: stm32: remove fdt_high and fdt_highinitrd_highPatrice Chotard5-10/+23
For stm32 f4, f7 and h7 boards, remove fdt_high and initrd_high as they shouldn't be used, this allows the fdt and initrd relocation. This implies to set CONFIG_SYS_BOOTMAPSZ to indicate the amount of memory available to contain kernel, device tree and initrd for relocation. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com>
2020-02-13board: stm32: fix extra env setings addressesPatrice Chotard5-20/+20
For stm32f4, f7 and h7 boards, reserve: - 4MB for kernel - 64KB for fdt, boot script, pxefile - the remaining memory for ramdisk Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com>
2020-02-13board: stih410-b2260: remove fdt_high and initrd_highPatrice Chotard1-2/+6
Remove fdt_high and initrd_high as they shouldn't be used, this allows the fdt and initrd relocation. This implies to set CONFIG_SYS_BOOTMAPSZ to indicate the amount of memory available to contain kernel, device tree and initrd for relocation. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com>
2020-02-13stm32mp1: remove fdt_high and initrd_high in environmentPatrick Delaunay1-3/+7
Remove fdt_high and initrd_high (set to 0xffffffff) in stm32mp1 board enviromnent, and U-Boot always relocate FDT and initrd in bootm command. This relocation is limited by CONFIG_SYS_BOOTMAPSZ which indicates the size of the memory region where it is safe to place data passed to the Linux kernel (DTB, initrd), it is a) Less than or equal to RAM size. b) not within the kernel's highmem region So 256M seems large enough in most circumstances and users can override this value via environment variable "bootm_mapsize" if needed. This modification increases the boot time but avoid assumption on aligned address for bootm command. A user can still define this variables themselves if the FDT or initrd is either left in-place or copied to a specific location. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-13ARM: keystone2: enable initrd fixup for LPAE addressingTero Kristo1-0/+1
Keystone2 u-boot loads the initrd image into non-LPAE addressed memory but linux kernel is running in LPAE. This causes a conflict as kernel detects that non-memory address is passed and kernel ignores initrd. There is an existing fixup logic to modify the address in the proper configuration, but this is disabled at the moment. Enable the fixup by setting the env variable for this so that initrd can be used properly. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-13pci: definition of pci_addr_t and pci_size_tHeinrich Schuchardt1-2/+2
Currently the size of pci_addr_t and pci_size_t depends on CONFIG_SYS_PCI_64BIT. For qemu_arm64_defconfig with 4 GiB RAM this leads to an error pci_hose_phys_to_bus: invalid physical address which is due to the truncation of the bus address in _dm_pci_phys_to_bus. Defining CONFIG_SYS_PCI_64BIT is not a solution as this results in an error PCI: Failed autoconfig bar 10 So let's use unsigned long for pci_addr_t and pci_size_t if CONFIG_SYS_PCI_64BIT is not defined. Considering that 32bit U-Boot is used to launch some 64bit x86 systems we cannot do without CONFIG_SYS_PCI_64BIT requiring u64 as type. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini28-286/+556
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
2020-02-10Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini5-0/+217
- Move P2SB from Apollo Lake to a more generic location - Add a function to find a device by drvdata in DM core - Enhancement of DM IRQ uclass driver - Add a clock driver for Intel devices - Add support for ACPI general-purpose events - Add a TPM driver for H1/Cr50 - Enable TPM on Google Chromebook Coral
2020-02-09board: ge: bx50v3, imx53ppd: configure CONFIG_SYS_BOOTMAPSZIan Ray2-2/+4
Configure `CONFIG_SYS_BOOTMAPSZ' per guidance on u-boot@lists.denx.de. Signed-off-by: Ian Ray <ian.ray@ge.com>
2020-02-09board: ge: bx50v3, mx53ppd: fix firstboot detectionRobert Beckett2-4/+3
Use `test' command to test for file existence instead of relying on the old functionality of the `ext2load' command (which now reports an error when attempting to load a zero length file). Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Ian Ray <ian.ray@ge.com>
2020-02-09board: ge: mx53ppd: use DM for uartIan Ray1-8/+1
Drop PPD_UART_PAD_CTRL since it matches defaults. Enable DM serial and MXC uart. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: bx50v3: use DM for uartRobert Beckett1-8/+2
Remove legacy uart pad and iomux code Enable DM serial and mxc uart Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: mx53ppd: Use DM for ethernetRobert Beckett1-8/+0
Remove legacy iomux setup for fec. Enable phylib and DM fec. Use Kconfig for enabling fec. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: bx50v3: Enable DM PWM for backlightRobert Beckett1-1/+1
Add backlight and panel devicetree definitions Use UCLASS_PANEL to enable backlight via display enable handler Remove old explicit gpio code for handling backlight Use cls command to initiate display in HW agnostic manner Enable DM regulator and pwm Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: mx53ppd: enable DM_VIDEOIan Ray1-7/+6
Enable DM_VIDEO for mx53ppd. Enable DM_REGULATOR_FIXED and DM_PWM for the backlight. Remove unused MX53PPD_LCD_POWER. Remove old (incorrect) setup_iomux_lcd. Enable backlight via display enable handler. Use cls command to initiate display in HW agnostic manner. Modify `failbootcmd' to use lcdputs. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: mx53ppd: add i2c eeprom bootcount storageRobert Beckett1-3/+1
Add bootcount node, linking to i2c eeprom "bootcount" partitions for storage. Enable i2c eeprom bootcount backend storage. Enable bootcount command and use it for failbootcmd. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: bx50v3: add i2c eeprom bootcount storageRobert Beckett1-3/+1
Add bootcount node, linking to i2c eeprom "bootcount" partitions for storage. Enable i2c eeprom bootcount backend storage. Enable bootcount command and use it for failbootcmd. Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-02-09board: ge: bx50v3, imx53ppd: use DM I2CRobert Beckett2-62/+0
Remove old (pre-DM) i2c setup code. Enable DM i2c. Convert common code to use DM rtc. Convert common code to read VPD from eeprom partition. Convert the generic i2c PMIC init code to use the new da9063 driver. mx53ppd only: Correct RTC compatible in device tree. Enable MXC DM i2c driver. Define CONFIG_SYS_MALLOC_F_LEN so that DM is available in pre-reloc. Make GPIO banks available during preloc, since initialisation is done in board_early_init_f(). Add gpio_request() calls to satisfy the DM_GPIO compatibility API. Remove unused power configuration. Signed-off-by: Robert Beckett <bob.beckett@collabora.com> Signed-off-by: Ian Ray <ian.ray@ge.com>
2020-02-09mx6sabre_common: Remove FEC related settingsFabio Estevam3-8/+17
In preparation for converting to DM_ETH and moving the FEC symbols to Kconfig we need to move the FEC definitions to mx6sabreauto.h and mx6sabresd.h to avoid build breakage during the conversion. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-02-09ARM: imx: novena: Enable DM ethernetMarek Vasut1-7/+2
Convert to DM ethernet to prevent board removal. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Vagrant Cascadian <vagrant@debian.org>
2020-02-09warp7: remove unused usb configsJoris Offouga1-4/+0
With commit 6b503f9e6549("warp7: Switch to DM USB"). These configs are not necessary Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-02-09mx7ulp_com: Remove unneeded SoC definitionsFabio Estevam1-4/+0
Since commit 9c27310ac23c ("mx7ulp: Move SoC base address to a common file") we no longer need to have these SoC definitions in the board file, so remove them. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-02-09mx6ul_14x14_evk: Move CONFIG_DM_74X164 to defconfigFabio Estevam1-5/+0
The CONFIG_DM_74X164 symbols should be moved to the defconfig file, as indicated in the comments. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-02-09board: toradex: Add Verdin iMX8M Mini supportIgor Opaniuk1-0/+128
This adds initial minimal support for the Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Mini USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) Normal Boot Trying to boot from MMC1 NOTICE: Configuring TZASC380 NOTICE: RDC off NOTICE: BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty NOTICE: BL31: Built : 01:11:41, Jan 25 2020 NOTICE: sip svc init U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100) CPU: Freescale i.MX8MMQ rev1.0 at 0 MHz Reset cause: POR DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Mini Quad 2GB Wi-Fi / BT IT V1.0A, Serial# 06535149 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-02-07board: presidio-asic: Add basic G3 engr. development board supportAlex Nemirovsky1-0/+75
Add basic Presidio G3 engineering board support Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-07tpm: Add more TPM2 definitionsSimon Glass1-0/+31
Add definitions for access and status. Need to drop the mixed case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: irq: Add support for requesting interruptsSimon Glass1-0/+115
At present driver model supports the IRQ uclass but there is no way to request a particular interrupt for a driver. Add a mechanism, similar to clock and reset, to read the interrupts required by a device from the device tree and to request those interrupts. U-Boot itself does not have interrupt-driven handlers, so just provide a means to read and clear an interrupt. This can be useful to handle peripherals which must use an interrupt to determine when data is available, for example. Bring over the basic binding file as well, from Linux v5.4. Note that the older binding is not supported in U-Boot; the newer 'special form' must be used. Add a simple test of the new functionality. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: irq: Add support for interrupt controller typesSimon Glass1-0/+23
There can be different types of interrupt controllers in a system and some drivers may need to distinguish between these. In general this can be handled using the device tree by adding the interrupt information to device nodes. However on x86 devices we have interrupt controllers which are not tied to any particular device and not really used in U-Boot. These still need to be inited, so a convenient method is to give each controller a type and allow a particular controller type to be probed. Add support for this in sandbox along with a test. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove the new bland line at EOF of test/dm/irq.c] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07x86: Add a clock driver for Intel devicesSimon Glass1-0/+15
So far we have avoided adding a clock driver for Intel devices. But the Designware I2C driver needs a different clock (133MHz) on Intel devices than on others (166MHz). Add a simple driver that provides this information. This driver can be expanded later as needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: core: Add a function to find a device by drvdataSimon Glass2-0/+16
It is sometimes useful to find a device in a uclass using only its driver data. The driver data often indicates the 'subtype' of the device, e,g, via its compatible string. Add a function to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07dm: core: Allow iterating devices without uclass_get()Simon Glass1-0/+17
At present we have uclass_foreach_dev() which requires that uclass_get() be called beforehand to find the uclass. This is good if we suspect that that function might fail, but often we know that the uclass is available. Add a new helper which does this uclass_get() automatically, so that only the uclass ID is needed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-06Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2-7/+4
- Gen 5 and Watchdog fixes
2020-02-05dm: core: Drop the inclusion of linux/compat.h in dm.hSimon Glass3-1/+4
Most files don't need this header and it pulls in quite of lots of stuff, malloc() in particular. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass3-71/+87
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass2-2/+4
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05sound: Add a new stop_play() methodSimon Glass1-0/+12
At present there is no positive indication that U-Boot has finished sending sound data. This means that it is not possible to power down an audio codec, for example. Add a new method that is called once all sound data has been sent. Add a new method for this, called when the sound_play() call is done. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-09 23:16:05 +0000