aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-08-31Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to KconfigTom Rini2-2/+0
This converts the following to Kconfig: CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31nxp: Migrate a number of DDR related symbols to KconfigTom Rini31-80/+0
- Guard most of the options in drivers/ddr/fsl/Kconfig with SYS_FSL_DDR || SYS_FSL_MMDC. - Migrate FSL_DMA, DDR_ECC, DDR_ECC_CMD, and ECC_INIT_VIA_DDRCONTROLLER to Kconfig. - Clean up the logic for including the DDR_ECC_CMD code. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31nxp: Migrate CONFIG_DDR_CLK_FREQ to KconfigTom Rini28-44/+11
As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZETom Rini2-2/+6
We have a number of CONFIG symbols to express the fixed size of system memory. For now, rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE and adjust usage to match that CONFIG_SYS_SDRAM_SIZE expects the entire size rather than MiB. Cc: Marek Behún <marek.behun@nic.cz> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <marek.behun@nic.cz>
2021-08-31mvebu: Migrate CONFIG_DDR_32BIT/64BIT to KconfigTom Rini1-3/+0
Move CONFIG_DDR_32BIT/64BIT to Kconfig as a choice for Armada XP platforms. Make 64bit the default as this mirrors the current code. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-30global: Remove unused or unnecessary CONFIG symbols related to DDRTom Rini6-91/+0
These symbols are now either unused or were only used within the config file to determine other logic, which could be done in a way that doesn't further pollute the CONFIG namespace. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30astro_mcf5373l: Rework ASTRO_ID logicTom Rini1-7/+7
Rather than using CONFIG namespace for logic internal to include/configs/astro_mcf5373l.h to select ASTRO_ID (and populate the default environment), strip CONFIG from the various options used and set. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30mpc83xx: Update commentTom Rini1-1/+1
Update the comment here to refer to PCI_CONFIG_ADDRESS rather than CONFIG_ADDRESS. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-08-30video: Remove ati_radeon_fbTom Rini1-1988/+0
This driver is currently unused. Remove. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-08-30global: Remove dead code that starts with CONFIG_[0-9A]Tom Rini9-25/+0
This removes a number of spots of dead code based on symbols that start with CONFIG_[0-9] or CONFIG_A. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i8042: Do not abuse CONFIG namespaceTom Rini1-6/+6
This driver uses the CONFIG namespace to set the chips internal CONFIG namespace related bits. However, CONFIG is reserved for the top-level Kconfig based configuration system. Use CFG as the namespace here instead to avoid pollution. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-08-30ppc: Rework some hard-coded BOOTCOMMANDSTom Rini23-76/+76
There are an assortment of hard-coded CONFIG_BOOTCOMMAND options in some board headers. Rework these so that they do not add to the CONFIG namespace. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30arm: Migrate GICV2 / GICV3 to KconfigTom Rini12-25/+4
Migrate CONFIG_GICV2 and CONFIG_GICV3 to Kconfig. We still have the GIC related registers that need to be handled more cleanly but start by moving this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_I2C_SET_DEFAULT_BUS_NUM et al to KconfigTom Rini16-69/+0
This converts the following to Kconfig: CONFIG_I2C_SET_DEFAULT_BUS_NUM CONFIG_I2C_DEFAULT_BUS_NUMBER Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30tegra: Cleanup I2C supportTom Rini1-5/+0
Remove the irrelevant section from the README and remove the non-functional SPL-undef section. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: fsl_i2c: Migrate to KconfigTom Rini27-187/+7
- As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30rcar: i2c: Migrate SYS_I2C_SH to KconfigTom Rini1-18/+0
- Migrate SYS_I2C_SH and related defines to Kconfig - Remove currently unused SYS_I2C_SH related defines - Cleanup related README section. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini44-213/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_SPEED et al to KconfigTom Rini66-144/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30ti: i2c: Convert CONFIG_SYS_OMAP24_I2C to CONFIG_SYS_I2C namespaceTom Rini1-1/+1
The omap24xx I2C driver uses its own CONFIG namespace for common I2C variables. Rather than convert more of them to Kconfig, rename these to the common I2C ones and remove the entirely unused functionality. As part of this, we make the am335x_shc platforms consistent with their intended speed values. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_EARLY_INIT to KconfigTom Rini6-14/+4
Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on SPL_SYS_I2C_LEGACY. Remove the weak implementation as it's either something that needs to exist for real, or shouldn't be called. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini88-106/+4
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_MVTWSI to KconfigTom Rini8-8/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_MVTWSI Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_SOFT et al to KconfigTom Rini4-14/+1
This converts the following to Kconfig: CONFIG_SYS_I2C_SOFT CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SOFT_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to KconfigTom Rini59-187/+2
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30eeprom: Drop CONFIG_ENV_EEPROM_IS_ON_I2C usageTom Rini11-11/+0
At this point in time, there's no systems with "U-Boot environment exists on an EEPROM which is accessed over the I2C bus" that sets this option. Drop it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30i2c: S3C24X0: Finish Kconfig migrationTom Rini1-5/+0
Finish moving this driver to Kconfig. - Update the dependency logic for Exynos5 too - Remove the unused CONFIG_SYS_I2C_S3C24X0_SPEED variable - Drop CONFIG_SYS_I2C_S3C24X0_SLAVE as it's always set to 0. - Move the internal SYS_I2C_S3C24X0_SLAVE define closer to the only user. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-30Convert CONFIG_ID_EEPROM to KconfigTom Rini28-29/+0
This converts the following to Kconfig: CONFIG_ID_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30siemens: Move CONFIG_SYS_I2C_EEPROM_ADDR usage out of CONFIG namespaceTom Rini1-4/+0
The instances of CONFIG_SYS_I2C_EEPROM_ADDR on these platforms doesn't match up with the rest of the EERPOM related defines in U-Boot. Move these out of the CONFIG namespace rather than make complex Kconfig logic. Cc: Samuel Egli <samuel.egli@siemens.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2021-08-30keymile: Use CONFIG_SYS_IVM_EEPROM_ADRTom Rini1-1/+0
As the code reads now, making this code path use CONFIG_SYS_IVM_EEPROM_ADR rather than CONFIG_SYS_I2C_EEPROM_ADDR seems to make sense as the rest of the EEPROM infrastructure isn't used on these platforms. Cc: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
2021-08-30arm: shc: Change CONFIG_SYS_I2C_EEPROM_ADDR to EEPROM_ADDRTom Rini1-1/+0
The shc platforms do not make use of the rest of the EEPROM infrastructure. Rather than make more elaborate Kconfig logic, remove this setting from the CONFIG namespace. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-08-30kp_imx53: Switch to using a local namespace for ID EEPROMTom Rini1-3/+0
This platform does not use any of the standard EEPROM functionality and instead provides its own. Use a local namespace for the I2C related defines to access the EEPROM. Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-08-30powerpc: Remove unused FCC ethernet codeTom Rini1-46/+1
This code is no longer used, remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30exynos: Update environment macros a bitTom Rini4-25/+14
Rework the default environment a bit to not use non-standard CONFIG_ENV_... names and similar one-off CONFIG names. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-30arm: keystone2: Rename CONFIG_ENV_KS2_BOARD_SETTINGSTom Rini5-5/+5
Rename CONFIG_ENV_KS2_BOARD_SETTINGS to ENV_KS2_BOARD_SETTINGS so that it better fits with the rest of the environment addition macros. Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30aristainetos2: Rename CONFIG_EXTRA_ENV_BOARD_SETTINGSTom Rini1-3/+3
Rename CONFIG_EXTRA_ENV_BOARD_SETTINGS to EXTRA_ENV_BOARD_SETTINGS in order to not further add to the CONFIG namespace. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-08-30usb: dwc2: Rename CONFIG_DWC2 namespace to DWC2Tom Rini1-4/+0
There are a number of DWC2 configuration options that are set in dwc2.h and referenced in dwc2.c only. Move these out of the CONFIG_DWC2 namespace and in to the DWC2 namespace. Note that hikey was defining an option that was already always enabled, so we can remove that hunk. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-27Merge tag 'xilinx-for-v2021.10-rc3' of ↵WIP/27Aug2021Tom Rini3-66/+308
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.10-rc3 xilinx: - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY - Print information about cpu via soc drivers and enable DISPLAY_CPUINFO - Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT zynq: - Wire single QSPI - Use power-source instead of io-standard properties - Enable nor on zc770-xm012 zynqmp: - Change handling around multi_boot() - Setup offset for u-boot.itb in spi - Generate run time dfu_alt_info for capsule update - Use explicit values for enums (zynqmp_firmware.h) - Enable RTC/SHA1/BUTTON/BUTTON_GPIO command - Disable WDT driver by default - Bind usb/scsi via preboot because of EFI - DT updates/fixes - Add soc driver - Fix SPL SPI boot mode versal: - Add soc driver sdhci: - Update tap delay programming for zynq_sdhci driver cmd: - Fix RTC uclass handling in date command - Update pwm help message - Update reset help message watchdog: - Fix wwdt compilation rtc: - Deal with seq alias in rtc uclass - Add zynqmp RTC driver fdt: - Add kernel-doc for fdt_fixup_memory_banks()
2021-08-26mmc: zynq_sdhci: Move setting tapdelay code to driverAshok Reddy Soma1-34/+0
Move tapdelay function calls to zynq_sdhci.c and make them static inline. zynqmp_tap_delay.h has function prototypes for the functions defined in tap_delays.c, which will not be needed anymore. Remove tap_delays.c and zynqmp_tap_delay.h files. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-26mmc: zynq_sdhci: Add xilinx_pm_request() method to set tapdelaysAshok Reddy Soma1-6/+19
Currently xilinx sdhci driver is using zynqmp_mmio_write() to set tapdelay values and DLL resets. Continue to use this for SPL and mini U-Boot where U-Boot will be executed at EL3 level. Use firmware call xilinx_pm_request() using appropriate arguments to set input/output tapdelays and also for DLL resets in regular flow(EL2). Host driver should explicitly request DLL reset before ITAP (assert DLL) and after OTAP (release DLL) to avoid issues in some cases. Also handle error return where possible. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-08-25Merge branch 'next-socfpga' of https://github.com/tienfong/uboot_mainlineTom Rini3-2/+117
2021-08-25include: configs: Add Intel N5X device CONFIGsSiew Chin Lim1-0/+45
Add CONFIGs for N5X. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-25drivers: clk: Add clock driver for Intel N5X deviceSiew Chin Lim1-0/+71
Add clock manager driver for N5X. Provides clock initialization and get_rate functions. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-24arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.hSiew Chin Lim1-1/+1
Rename to common file name to used by all SOC64 devices and change "_S10_" to "_SOC64_" in base_addr_soc64.h. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-08-23Merge tag 'efi-2021-10-rc3' of ↵WIP/23Aug2021Tom Rini4-15/+89
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc3 Documentation: * Rename Freescale to NXP * Document structures used for the UEFI TCG2 protocol UEFI: * Device paths must use EfiBootServicesData
2021-08-23Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini4-19/+3
fsl-qoriq: Fixes related to env, spi, usb, crypto, configs, distro-boot for Layerscape Boards like lx2, sl28, ls2088ardb. powerpc: Fixes for t208xrdb revd board and cortina related configs update for T208xRDB, T4240RDB.
2021-08-22i2c: add dm_i2c_reg_clrsetSebastian Reichel1-0/+14
Add function to apply a bitmask to an i2c register, so that specific bits can be cleared and/or set. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-20configs: lx2160a: load device-tree in RAM for distro bootPriyanka Jain1-0/+3
Update boot-commands to load device-tree from boot-device at 'fdt_addr_r' address in DDR during distro-boot. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18configs: Migrate CORTINA_FW_ADDR and CORTINA_FW_LENGTH to KconfigKuldeep Singh3-18/+0
Use moveconfig.py script to convert below defines to Kconfig and move these entries to defconfigs. CONFIG_CORTINA_FW_ADDR CONFIG_CORTINA_FW_LENGTH Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18arm: Finish migration of HAS_FSL_XHCI_USBTom Rini1-1/+0
This symbol was largely migrated, except for one case. Update it. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.1 at 2024-08-13 07:15:07 +0000