aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-12-23fdt: Drop #ifdefs with MULTI_DTB_FITSimon Glass1-0/+8
Refactor the code to drop the #ifdefs for this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23arm: rpi: Sync rpi dts files from LinuxSimon Glass1-0/+2
Sync these files, obtained from Linux v5.15. This adds a devicetree file for rpi_4 which was not there before. Testing shows no change so far as I can see: - boots to U-Boot prompt on rpi0, rpi2 - boots to distro on rpi3 - boots to distro on rpi4 I am assuming that syncing with Linux is safe, but the maintainer should know for sure. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-20Merge tag 'v2022.01-rc4' into nextWIP/20Dec2021-nextTom Rini12-11/+269
Prepare v2022.01-rc4
2021-12-19fdt_support: Add fdt_delete_disabled_nodes() and use in Turris MOXMarek Behún1-0/+2
Move Turris MOX specific remove_disabled_nodes() to fdt_support with name fdt_delete_disabled_nodes(), so that others can potentially use it. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-19fdt_support: Add some useful functionsMarek Behún1-0/+30
Add functions fdt_node_offset_by_pathf(), fdt_create_phandle_by_pathf(), fdt_set_status_by_pathf() to get node offset, get/create node phandle and set status for node given by path/alias formatted with sprintf. Add functions fdt_create_phandle_by_compatible(), fdt_set_status_by_compatible() to get/create node phandle and set status for first node given by compatible. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-19fdt_support: Remove FDT_STATUS_FAIL_ERROR_CODEMarek Behún1-10/+8
Since no one uses this feature and I am not aware of any parsers of this in Linux, remove it. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Michael Walle <michael@walle.cc> Cc: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-19fdt_support: Remove fdt_alloc_phandle() in favor of fdt_generate_phandle()Marek Behún1-1/+0
Commit f0921f5098d ("fdt: Sync up to the latest libfdt") introduced fdt_generate_phandle() in libfdt, making fdt_alloc_phandle() obsolete in fdt_support. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: "hui.song" <hui.song_1@nxp.com> Cc: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-19include/linux/byteorder: Fix compilation of __constant_cpu_to_be32()Pali Rohár1-0/+4
The macro __constant_cpu_to_be32() uses ___constant_swab32(), which for some reason is not defined and causes the following error during compilation: include/linux/byteorder/little_endian.h:28:52: warning: implicit declaration of function ‘___constant_swab32’; did you mean ‘__builtin_bswap32’? [-Wimplicit-function-declaration] #define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x))) Declare all ___constant_swabXX() macros. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-18dm: fix an 'undefined' error in some macrosAKASHI Takahiro1-4/+4
Due to a non-existing parameter name in macro's, use of those macro's will cause a compiler error of "undefined reference". Unfortunately, dm test doesn't fail because a wrong name ("&dev", hence it is accidentally a valid name in the context of a caller site) is passed on. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Fixes: f262d4ca4b2b ("dm: core: Add a way to read platdata for all child devices") Fixes: 903e83ee8464 ("dm: core: Add a way to iterate through children, probing each") Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-18blk: add a helper function, blk_probe_or_unbind()AKASHI Takahiro1-0/+12
This function will be commonly used in block device drivers in the succeeding patches. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-17fdtgrep: Handle an empty output treeSimon Glass1-0/+1
In strange cases it is possible for fdtgrep to find nothing to output. Typically this means that the resulting SPL device tree is not going to allow anything to boot, but at present the tree is actually invalid, since it only has an END tag in the struct region. The FDT spec requires at least a root node. So add a special case to include at least this, if the FDT_REG_SUPERNODES flag is set. This ensures that grepping an empty tree still produces a valid tree. Also add comments to the enum since it is not completely obvious from the names now. The typical symptom of this problem is a message from binman: pylibfdt error -11: FDT_ERR_BADSTRUCTURE Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17Convert CONFIG_PHYSMEM to KconfigSimon Glass3-7/+0
This converts the following to Kconfig: CONFIG_PHYSMEM Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Sean Anderson <seanga2@gmail.com>
2021-12-15Merge tag 'clk-2022.01-rc3' of ↵WIP/15Dec2021Tom Rini1-1/+2
https://source.denx.de/u-boot/custodians/u-boot-clk Clock patches for v2022.01-rc3 This adds better logging support for many CCF drivers, and clarifies some documentation regarding clk_get_rate.
2021-12-15clk: fix clk_get_rate() documentationGiulio Benetti1-1/+2
Improve clk_get_rate() @return documentation that otherwise is a bit ambiguous. At the moment I expect to return 0 as error since the return type is 'ulong', instead the function really returns negative value in case the corresponding function pointer is null and returns 0 if the clock is invalid. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-12-15Merge tag 'rpi-next-2022.01' of ↵Tom Rini1-1/+2
https://source.denx.de/u-boot/custodians/u-boot-raspberrypi - enable RPi Zero 2 W - fix MMC numbering issue - Update link to documentation
2021-12-13Merge tag 'u-boot-stm32-20211213' of ↵WIP/13Dec2021Tom Rini2-1/+22
https://source.denx.de/u-boot/custodians/u-boot-stm - enable KSZ90x1 PHY driver on DHCOR - DHSOM boards: - increase USB power-good delay - add update_sf script to install U-Boot into SF - increase PHY auto-negotiation timeout to 20 seconds - fix SoM and board coding strap GPIO handling # gpg verification failed.
2021-12-13ARM: stm32: Increase PHY auto-negotiation timeout to 20s on DHSOMMarek Vasut1-0/+3
The Micrel PHYs on known DHSOM based boards take a while to come out of reset, increase the auto-negotiation timeout to prevent it from timing out in case the ethernet is used right after the board was reset. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13ARM: stm32: Add update_sf script to install U-Boot into SF on DHSOMMarek Vasut1-1/+11
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. The script erases the entire SPI NOR, including U-Boot environment, to make sure the installation is clean. To retain environment from current running U-Boot, run 'saveenv' after running the 'update_sf' script. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-12-13ARM: stm32: Increase USB power-good delay on DHSOMMarek Vasut2-1/+9
The USB hub on STM32MP1 DHCOM boards needs to wait a bit longer until the USB Vbus is stable. Increase the USB power-good delay to 1 s. This adds default-undefined STM32MP_BOARD_EXTRA_ENV variable into stm32mp15_common.h to reduce duplication in board-specific config files adding custom environment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-12-13configs: beacon-rzg2m: Config to address new aliasesAdam Ford1-1/+1
The resync of the device trees from Linux 5.16-rc3 caused aliases to appear on the MMC devices which changed the numbering. This changed the default boot device and caused boot failure. Update the mmcdev variable to reflect the new aliases. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-12-09efi: Add a media/block driver for EFI block devicesSimon Glass1-0/+11
Add a block driver which handles read/write for EFI block devices. This driver actually already exists ('efi_block') but is not really suitable for use as a real U-Boot driver: - The operations do not provide a udevice - The code is designed for running as part of EFI loader, so uses EFI_PRINT() and EFI_CALL(). - The bind method probes the device, which is not permitted - It uses 'EFI' as its parent device The new driver is more 'normal', just requiring its platform data be set up in advance. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09efi: Add uclass for devices provided by UEFI firmwareSimon Glass2-0/+2
UCLASS_EFI_LOADER is used for devices created by applications and drivers loaded by U-Boots UEFI implementation. This patch provides a new uclass (UCLASS_EFI_MEDIA) to be used for devices that provided by a UEFI firmware calling U-Boot as an EFI application. If the two uclasses can be unified, is left to future redesign. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09efi: Rename UCLASS_EFI and IF_TYPE_EFISimon Glass2-2/+2
These names are better used for access to devices provided by an EFI layer. Use EFI_LOADER instead here, since these are only available in U-Boot's EFI_LOADER layer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09efi_loader: efi_tcg2_register returns appropriate errorMasahisa Kojima1-0/+2
This commit modify efi_tcg2_register() to return the appropriate error. With this fix, sandbox will not boot because efi_tcg2_register() fails due to some missing feature in GetCapabilities. So disable sandbox if EFI_TCG2_PROTOCOL is enabled. UEFI secure boot variable measurement is not directly related to TCG2 protocol installation, tcg2_measure_secure_boot_variable() is moved to the separate function. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-12-05ide: Drop unused CONFIG optionsSimon Glass2-3/+0
CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use ATA_PORT_ADDR() locally instead. Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also unused. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05sandbox: Drop CONFIG_SYS_TIMER_RATESimon Glass1-4/+0
This is not used by sandbox since it uses driver model for the timer. Drop it. Also update the tools_only build to avoid build errors, since it does actually build U-Boot too. Enable DM so we can use CONFIG_TIMER, disable EFI_LOADER to avoid an error about board_quiesce_devices() and disable NET to avoid having to define CONFIG_AVB_BUF_ADDR Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05Convert CONFIG_KEYBOARD to KconfigSimon Glass6-17/+0
This converts the following to Kconfig: CONFIG_KEYBOARD Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05Convert CONFIG_SYS_FDT_LOAD_ADDR to KconfigSimon Glass1-6/+0
This converts the following to Kconfig: CONFIG_SYS_FDT_LOAD_ADDR Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05sandbox: Drop CONFIG_HOST_MAX_DEVICESSimon Glass2-2/+3
This can go in the related header file. Drop the CONFIG option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-02Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net ↵WIP/02Dec2021Tom Rini1-0/+3
into next - New Broadcom NetXtreme driver - Support for socat for netconsole - Felix switch soft reset fix
2021-12-02riscv: dts: Split Microchip device treePadmarao Begari2-0/+213
The device tree split into .dtsi and .dts files, common device node for eMMC/SD, enable I2C1, UART1 for console instead of UART0, enable the DDR 2GB memory and in that 288MB memory is reserved for fabric buffer. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02board: ae350: Support autoboot from RAMLeo Yu-Chi Liang1-1/+12
Add boot command "bootcmd_ram" to support autoboot from RAM. This feature could be useful at the very initial state of chip design when there is only a minimal set of peripheral. (e.g. without mmc and mac ..etc) The kernel image is default to be loaded at 0x2000000 via debug port, and the following script serves as an example: spl() { cmd="riscv64-linux-gdb -q \ -ex \"target remote $host:$port\" \ -ex \"load\" \ -ex \"thread apply all set \\\$pc=&_start\" \ -ex \"thread apply all set \\\$a0=\\\$mhartid\" \ -ex \"thread apply all set \\\$a1=<dtb address>\" \ -ex \"restore u-boot.itb binary 0x200000\" \ -ex \"restore Image binary 0x2000000\" \ -ex \"c\" \ spl/u-boot-spl " echo $cmd eval $cmd } The address where the kernel is loaded can be altered by changing the value of KERNEL_IMAGE_ADDR. Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-12-02net: brcm: netXtreme driverBharat Gooty1-0/+3
Broadcom bnxt L2 driver support. Used by the Broadcom iproc platforms. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
2021-12-01pinctrl: change result for unsupported APIPatrick Delaunay1-2/+2
Use the return value ENOSYS for unsupported API - pinctrl_generic_set_state - pinctrl_select_state Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-01Convert CONFIG_FSL_DDR_BIST et al to KconfigWIP/2021-12-01-Kconfig-migrationsTom Rini1-2/+0
This converts the following to Kconfig: CONFIG_FSL_DDR_BIST CONFIG_FSL_DDR_INTERACTIVE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01Convert CONFIG_SYS_BR0_PRELIM et al to KconfigTom Rini9-151/+0
This converts the following to Kconfig: CONFIG_SYS_BR0_PRELIM CONFIG_SYS_OR1_PRELIM CONFIG_SYS_BR1_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR2_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR3_PRELIM CONFIG_SYS_OR3_PRELIM CONFIG_SYS_BR4_PRELIM CONFIG_SYS_OR4_PRELIM CONFIG_SYS_BR5_PRELIM CONFIG_SYS_OR5_PRELIM CONFIG_SYS_BR6_PRELIM CONFIG_SYS_OR6_PRELIM CONFIG_SYS_BR7_PRELIM CONFIG_SYS_OR7_PRELIM This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms that can set these values do so. Add the relevant SYS_BRx_PRELIM_BOOL to platforms that had not been previously migrated. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini199-1928/+2
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-30common: add fdt_simplefb_enable_and_mem_rsv functionPatrick Delaunay1-0/+1
Add a new function to activate an existing simple frame buffer node and add the associated reserved memory, with no-map properties. This device tree update is only done when the video device is active and the video buffer is used. This patch uses '#if CONFIG_IS_ENABLED(DM_VIDEO)' because gd->video_bottom and gd->video_top are only defined when CONFIG_DM_VIDEO is activated. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30video: Add video_is_active functionPatrick Delaunay1-0/+7
Add the helper function video_is_active() to test if one video device is active. This function can be used in board code to execute operation only when the display is probed / really used. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30common: rename functions lcd_dt_simplefb to fdt_simplefbPatrick Delaunay1-2/+2
Rename the function named lcd_dt_simplefb* to fdt_simplefb* to be aligned with the associated file name fdt_simplefb.h/fdt_simplefb.c Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30Convert CONFIG_LCD_DT_SIMPLEFB to KconfigPatrick Delaunay1-1/+0
This converts the following to Kconfig: CONFIG_LCD_DT_SIMPLEFB This patch also renames this config to CONFIG_FDT_SIMPLEFB as the code in common/lcd_simplefb.c support CONFIG_LCD and CONFIG_VIDEO. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30ARM: stm32: Increase PHY auto-negotiation timeout to 20s on DHSOMMarek Vasut1-0/+3
The Micrel PHYs on known DHSOM based boards take a while to come out of reset, increase the auto-negotiation timeout to prevent it from timing out in case the ethernet is used right after the board was reset. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-30ARM: stm32: Add update_sf script to install U-Boot into SF on DHSOMMarek Vasut1-1/+11
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. The script erases the entire SPI NOR, including U-Boot environment, to make sure the installation is clean. To retain environment from current running U-Boot, run 'saveenv' after running the 'update_sf' script. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-30ARM: stm32: Increase USB power-good delay on DHSOMMarek Vasut2-1/+9
The USB hub on STM32MP1 DHCOM boards needs to wait a bit longer until the USB Vbus is stable. Increase the USB power-good delay to 1 s. This adds default-undefined STM32MP_BOARD_EXTRA_ENV variable into stm32mp15_common.h to reduce duplication in board-specific config files adding custom environment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30Fix MMC numbering issue for Raspberry Pi 3Mike Karels1-1/+2
Using mmc.dtbo from rpi-firmware to switch the controller for the SD card slot from sdhci to sdhost causes the numbering to change; the SD card is then not recognized at boot. Add to the range checked. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-11-30tpm: use more algorithms than sha256 on pcr_readRuchika Gupta1-1/+4
The current tpm2_pcr_read is hardcoded using SHA256. Make the actual command to TPM configurable to use wider range of algorithms. The current command line is kept as is i.e limited to SHA-256 only. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-30efi_loader: Add check for event log passed from firmwareRuchika Gupta1-0/+2
Platforms may have support to measure their initial firmware components and pass the event log to u-boot. The event log address can be passed in property tpm_event_log_addr and tpm_event_log_size of the tpm node. Platforms may choose their own specific mechanism to do so. A weak function is added to check if even log has been passed to u-boot from earlier firmware components. If available, the eventlog is parsed to check for its correctness and further event logs are appended to the passed log. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-29Merge tag 'v2022.01-rc3' into nextTom Rini7-73/+113
Prepare v2022.01-rc3 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-28dm: core: Add a way to count the devices in a uclassSimon Glass1-0/+8
Add a function that returns the number of devices in a uclass. This can be helpful in sizing an array that needs to hold a list of them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-28dm: core: Allow finding children / uclasses by partial nameSimon Glass2-0/+21
In some cases it is useful to search just by a partial name, such as when looking for a sibling device that has a common name substring. Add helper functions to handle these requirements. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-14 08:45:08 +0000