aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2022-02-08remoteproc: uclass: Add remoteproc resource handling helpersKeerthy1-1/+383
Add remoteproc resource handling helpers. These functions are primarily to parse the resource table and to handle different types of resources. Carveout, devmem, trace & vring resources are handled. Signed-off-by: Keerthy <j-keerthy@ti.com> [Amjad: fix redefinition of "struct resource_table" and compile warnings ] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-02-08linux: bitmap.h: Add find_next_zero_area functionKeerthy1-0/+26
Add find_next_zero_area to fetch the next zero area in the map. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
2022-02-08dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2Aswath Govindraju1-0/+3
Add pinctrl macros for J721S2 SoC. These macro definitions are similar to that of J721E, but adding new definitions to avoid any naming confusions in the soc dts files. checkpatch insists the following error exists: ERROR: Macros with complex values should be enclosed in parentheses However, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08dt-bindings: ti-serdes-mux: Add defines for J721S2 SoCAswath Govindraju1-0/+22
There are 4 lanes in the single instance of J721S2 SERDES. Each SERDES lane mux can select upto 4 different IPs. Define all the possible functions. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08power: domain: ti: Add support for J721S2 SoCDavid Huang1-0/+1
Add support for J721S2 SoC. Signed-off-by: David Huang <d-huang@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-02-08clk: clk-k3: Add support for J721S2 SoCDavid Huang1-0/+1
Add support for J721S2 SoC. Signed-off-by: David Huang <d-huang@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-02-08arm: K3: Add basic support for J721S2 SoC definitionDavid Huang1-0/+191
Add basic support for J721S2 SoC definition Signed-off-by: David Huang <d-huang@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
2022-02-07Merge tag 'u-boot-imx-20220207' of ↵WIP/07Feb2022Tom Rini14-18/+406
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211022 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/10887 - imx8 : Toradex Verdin MX8M Plus Kontron pitx-imx8m - imx8ulp: several fixes and improvements - imx6ull fixes - switching to binman
2022-02-07apalis/colibri_imx6: move setting bootcmd to defconfigOleksandr Suvorov2-8/+0
Move setting the default boot command to the apalis/colibri_imx6_defconfig. It allows replacing the command without code modification. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-02-07board: toradex: add verdin imx8m plus supportMarcel Ziswiler1-0/+131
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05efi_loader: add handle for UARTHeinrich Schuchardt1-0/+1
When loading an EFI binary via the UART we assign a UART device path to it. But we lack a handle with that device path. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-02-05ARM: imx6: dh-imx6: Add update_sf script to install U-Boot into SFMarek Vasut1-0/+4
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board supportHeiko Thiery1-0/+97
The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-05arm: dts: imx8mq kernel dts updatesAngus Ainslie1-0/+48
Update to the 5.16 imx8mq dts files and dt bindings Changes since v1: Dropped rfkill.h that is not in linux mainline yet. Signed-off-by: Angus Ainslie <angus@akkea.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phyRichard Zhu1-0/+14
Add binding for reference clock PAD modes of the i.MX8 PCIe PHY. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1638432158-4119-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> # Pick from Linux f6f787874aa5 ("dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phy")
2022-02-05imx: imx8qm_rm7720: adjust fdt_addrOliver Graute1-1/+1
The Linux Kernel Image size for arm64 is still growing. A Kernel with 54 MB at load address 0x80280000 overlaps with fdt_addr at 0x83000000. So let's increase it to 0x84000000 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-02-05imx: imx8qm_rom7720: Increase CONFIG_SYS_BOOTM_LEN to 64MBOliver Graute1-0/+2
Increase CONFIG_SYS_BOOTM_LEN to 64MB Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-02-05imx: ventana: correct splashimage load addressAndrey Zhizhikin1-1/+1
Commit 72d81360aabd ("global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR") dropped the usage of LOADADDR and replaced it with SYS_LOADADDR. Use the correct macro in environment by replacing CONFIG_LOADADDR with CONFIG_SYS_LOADADDR. Fixes: d75ebf3482c3 ("imx: ventana: fix splash logo drawing") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-By: Tim Harvey <tharvey@gateworks.com>
2022-02-05imx8mq_evk: configs: add/cleanup variables for distro bootAndrey Zhizhikin1-4/+4
Add fdt_addr_r fdtfile which used by distro boot, and cleanup legacy environment variables. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2022-02-05configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.binYing-Chun Liu (PaulLiu)1-2/+1
We changed to single flash.bin now. So dfu_alt_info should be modified to reflect this change. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 boardChristoph Niedermaier1-2/+2
The PDK2 board is capable of running both 100M and 1G ethernet. However, the i.MX6 has only one ethernet MAC, so it is possible to configure either 100M or 1G Ethernet. In case of 100M option, the PHY is on the SoM and the signals are routed to a RJ45 port. For 1G the PHY is on the PDK2 board with another RJ45 port. 100M and 1G ethernet use different signal pins from the i.MX6, but share the MDIO bus. This SoM board combination is used to demonstrate how to enable 1G ethernet configuration. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de>
2022-02-05imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO boardAriel D'Alessandro1-0/+90
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for: - 1GiB DDR4 RAM - 16 GiB eMMC - SD card - Gigabit ethernet - USBOTG1 peripheral - fastboot Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05mx7ulp_com: add support for SPLRicardo Salveti1-0/+6
Add EA iMX7ULP COM board support for building SPL. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2022-02-05colibri-imx7: improve env badblock managementFrancesco Dolcini1-0/+5
Use the complete 512kb (4 blocks) nand partition reserved for u-boot environment instead of just the first block, this allows the module to have a working environment even if 3 blocks are bad. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-02-03Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini4-22/+164
This is the promised second part of the sunxi PR for 2022.04, albeit technially outside of the merge window. We were working on this full steam since the beginning of the year, and it deserves to be merged, I think. The main attraction is support for the F1C100s SoC, which sports a venerable ARM926 core. Support for this SoC and the LicheePi Nano board has been in Linux for years, and U-Boot patches were posted mid last year already. The new SoC using ARMv5 also means that the bulk of the new code should not touch any existing boards, although we did some refactorings first, of course, which actually cleans up some existing sunxi code. Compile tested for all 160 sunxi boards, and briefly tested on BananaPi M1, OrangePi Zero, Pine64 and Pine-H64. Tested by others on their boards, including F1C100s and F1C200s devices.
2022-02-04ARM: dts: suniv: Add device tree files and bindings for F1C100sIcenowy Zheng2-0/+108
Add device tree files for suniv and Lichee Pi Nano it is a board based on F1C100s. dt-bindings/dts are synced with 5.16.0 Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04configs: sunxi: Add common SUNIV headerIcenowy Zheng2-15/+56
Adds support for SUNIV and the F1C100s. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-04sunxi-common.h: remove pointless #ifdefsAndre Przywara1-7/+0
Remove some pointless #ifdefs from this file, as there are quite too many of them already. Some definitions don't really hurt to have in any case, so remove the pointless CONFIG_MMC guard around CONFIG_MMC_SUNXI_SLOT. The BOARD_SIZE_LIMIT applies regardless of ARM64 or not (now), so remove that guard as well. The maximum number of MMC devices does not depend on CONFIG_ENV_IS_IN_MMC, so move that out to simplify the file. Last but not least CONFIG_SPL_BOARD_LOAD_IMAGE serves no real purpose anymore: it's unconditionally defined for all sunxi boards, and protects nothing applicable outside of sunxi code anymore. Just remove it. Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-03efi: Use 16-bit unicode stringsSimon Glass2-3/+3
At present we use wide characters for unicode but this is not necessary. Change the code to use the 'u' literal instead. This helps to fix build warnings for sandbox on rpi. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2022-02-01km/ls102xa: add support for field fail-safe u-boot updateAleksandar Gerasimovski1-0/+2
Field fail-safe u-boot update procedure for pg-wcom boards is defined and implemented by patch: 59b3403. This patch invokes the update procedure for pg-wcom-ls102x designs during early misc_init_f execution. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-02-01board: traverse: add initial Ten64 supportMathew McBride1-0/+55
The Ten64 is a networking-oriented MiniITX board using the NXP LS1088A SoC. This patch provides the bare minimum to support Ten64 boards under U-Boot for distroboot. Some related drivers have not yet been submitted and this basic support lacks some of the opinionated defaults provided by our firmware distribution. Signed-off-by: Mathew McBride <matt@traverse.com.au> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2022-01-31arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for ↵Tony Dinh1-23/+9
Ethernet The GoFlex Home board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, use BIT macro, and cleanup comments. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31arm: kirkwood: Pogoplug-V4 : Add board implementation filesTony Dinh1-0/+56
Add board header, defconfig, and implementation files for Pogoplug V4. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2022-01-30Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiWIP/30Jan2022Tom Rini6-4/+13
a bit delayed, the first batch of the sunxi pull request for this cycle. This is mostly collecting some patches that were lying around for a while, plus some recent fixes. Nothing too exciting at this point, but of course they should be merged nevertheless. There is the much bigger F1C100s SoC support coming up, which I hope to be able to send in the next few days, along with the removal of sunxi's lowlevel_init usage. Compile tested for all 159 sunxi boards, plus briefly tested on BananaPi M1, OrangePi Zero, Pine64 and Pine-H64.
2022-01-30pmic: axp: define ALDO_IN startup bitAndre Przywara6-4/+13
Most AXP PMICs feature a "startup source" register, which keeps information about how the PMIC started operation. Bit 0 in there means it has been started by "plugging in the power cable". Define a symbol in each PMIC's header file to be able to use that register and bit later on. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-01-29Merge tag 'efi-2022-04-rc1-3' of ↵WIP/29Jan2022Tom Rini3-1/+44
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-04-rc1-3 Documentation: * update Nokia RX-51 documentation and move it to rst * describe boot switch settings for HiFive Unmatched board UEFI: * fix the checking of images hashes and signatures * provide the RISCV_EFI_BOOT_PROTOCOL
2022-01-29efi_loader: correctly handle mixed hashes and signatures in dbIlias Apalodimas2-1/+14
A mix of signatures and hashes in db doesn't always work as intended. Currently if the digest algorithm is not explicitly set to sha256 we stop walking the security database and reject the image. That's problematic in case we find and try to check a signature before inspecting the sha256 hash. If the image is unsigned we will reject it even if the digest matches. Since we no longer reject the image on unknown algorithms add an explicit check and reject the image if any other hash algorithm apart from sha256 is detected on dbx. Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-29efi_loader: Enable RISCV_EFI_BOOT_PROTOCOL supportSunil V L3-0/+30
This adds support for new RISCV_EFI_BOOT_PROTOCOL to communicate the boot hart ID to bootloader/kernel on RISC-V UEFI platforms. The specification of the protocol is hosted at: https://github.com/riscv-non-isa/riscv-uefi Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-28configs: am64xx_evm: Increase BSS max size to 16KVignesh Raghavendra1-1/+1
With Ethboot support in SPL, network stack requires more BSS area, so increase BSS max size to 16K Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2022-01-28rsa: adds rsa3072 algorithmJamin Lin1-0/+1
Add to support rsa 3072 bits algorithm in tools for image sign at host side and adds rsa 3072 bits verification in the image binary. Add test case in vboot for sha384 with rsa3072 algorithm testing. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-28spl: add support for custom boot method namesHeiko Thiery1-1/+14
Currently the names MMC1, MMC2 and MMC2_2 are output in the SPL. To achieve more userbility here the name of the boot source can be returned. E.g. for "MMC1" -> "eMMC" or "MMC2" -> "SD card". Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc>
2022-01-27Merge tag 'dm-pull-26jan22' of ↵Tom Rini7-23/+396
https://source.denx.de/u-boot/custodians/u-boot-dm acpi refactoring to allow non-x86 use binman support for bintools (binary tools) minor tools improvements in preparation for FDT signing various minor fixes and improvements
2022-01-26usb: gadget: Add CDC ACM functionLoic Poulain1-0/+1
Add support for CDC ACM using the new UDC and gadget API. This protocol can be used for serial over USB data transfer and is widely supported by various OS (GNU/Linux, MS-Windows, OSX...). The usual purpose of such link is to access device debug console and can be useful for products not exposing regular UART to the user. A default stdio device named 'usbacm' is created, and can be used to redirect console to USB link over CDC ACM: > setenv stdin usbacm; setenv stdout usbacm Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2022-01-26tools: mkimage: Show where signatures/keys are writtenSimon Glass1-1/+22
At present mkimage displays the node information but it is not clear what signing action was taken. Add a message that shows it. For now it only supports showing a single signing action, since that is the common case. Sample: Signature written to 'sha1-basic/test.fit', node '/configurations/conf-1/signature' Public key written to 'sha1-basic/sandbox-u-boot.dtb', node '/signature/key-dev' Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-26image: Return destination node for add_verify_data() methodSimon Glass3-5/+8
It is useful to know where the verification data was written. Update the API to return this. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-26tools: Pass the key blob aroundSimon Glass1-5/+18
At present we rely on the key blob being in the global_data fdt_blob pointer. This is true in U-Boot but not with tools. For clarity, pass the parameter around. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-26tools: Improve comments in signing functionsSimon Glass1-1/+1
Add some more comments to explain what is going on in the signing functions. Fix two repeated typos. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25dm: Fix OF_BAD_ADDR definitionPatrice Chotard1-1/+4
When OF_LIVE flag is enabled on a 64 bits platform, there is an issue when dev_read_addr() is called and need to perform an address translation using __of_translate_address(). In case of error, __of_translate_address() return's value is OF_BAD_ADDR (wich is defined in include/dm/of.h to ((u64)-1) = 0xffffffffffffffff). The return value of dev_read_addr() is often compared to FDT_ADDR_T_NONE which is defined as (-1U) = 0xffffffff. In this case the comparison is always false. To fix this issue, define FDT_ADDR_T_NONE to (ulong)(-1) in case of AARCH64. Update accordingly related tests. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-25acpi: Add some tables needed by ARM devicesSimon Glass1-0/+205
Add some tables needed for ARM devices, including more MADT subtables, a CSRT descriptor, GTDT and PPTT. WIP: This needs comments added. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-25acpi: Collect tables in the acpi_item listSimon Glass1-0/+14
At present this list is used to collect items within the DSDT and SSDT tables. It is useful for it to collect the whole tables as well, so there is a list of what was created and which write created each one. Refactor the code accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-14 19:40:31 +0000