aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2006-11-27Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be ableMarkus Klotzbuecher6-6/+6
to choose between the old and the generic OHCI drivers.
2006-11-27Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driverMarkus Klotzbuecher5-0/+16
and adapted board configs TQM5200 and yosemite accordingly. This commit also makes the maximum number of root hub ports configurable (CFG_USB_OHCI_MAX_ROOT_PORTS).
2006-08-07Merge with /home/wd/git/u-boot/masterWolfgang Denk31-2146/+4121
2006-08-07Merge with /home/tur/proj/usb_sticks/u-bootWolfgang Denk1-0/+1
2006-08-02Add rudimentary handling of alternate settings of USB interfaces - to fixBartlomiej Sieka1-0/+1
problems with some USB storage devices. Some code readability improvements.
2006-07-27Merge with /home/sr/git/u-boot/denxWolfgang Denk1-4/+12
2006-07-27AMCC bamboo (440EP) U-Boot image reduced to 384kbyteStefan Roese1-4/+12
Please see doc/README.bamboo for details. Patch by Stefan Roese, 27 Jul 2006
2006-07-26Fix preboot message on TQM5200 after switching to hush parser.Wolfgang Denk1-1/+1
2006-07-22Add support for 256 MB SDRAM on CPU87Wolfgang Denk1-3/+21
Patch by Josef Wagner, 25 Nov 2005
2006-07-22Add configuration for cam5200 board (based on TQM5200S).Wolfgang Denk1-6/+6
2006-07-21More code cleanupWolfgang Denk3-8/+14
2006-07-21Code cleanupWolfgang Denk2-38/+38
2006-07-21Enable initrd ATAG for xm250 board.Wolfgang Denk1-3/+3
Patch by Josef Wagner, 05 Sep 2005
2006-07-21Add support for friendly-arm SBC-2410X boardWolfgang Denk1-0/+239
Patch by JinHua Luo, 01 Sep 2005
2006-07-21Add support for KVME080 boardWolfgang Denk1-0/+262
Patch by Sangmoon Kim, 18 Aug 2005
2006-07-21* Cleanup TQM5200 board configurations:Wolfgang Denk4-91/+110
- make highboot configurations use environment at high end, too, to avoid flash fragmentation - always use redundand environment - don't enable video code for modules without graphics controller - provide useful (though different) mtdparts settings - get rid of CONFIG_CS_AUTOCONF which was always set anyway * Extend mkconfig tool to print more useful target name
2006-07-19Add support for high-boot on TQM5200 and TQM5200S boards.Wolfgang Denk1-5/+1
Hint: the CPLD on the TQM5200 must be programmed with a software version supporting the high boot option! The new TQM5200S is already supporting this option. On the TQM5200 this option will be supported in configurations with MPC5200 rev B processors. To actually "high boot", set jumper X30 on the STK52xx. Patch by Martin Krause, 12 Jul 2006
2006-07-19Add support for new TQM5200 revisionsWolfgang Denk2-9/+97
- Support for TQM5200S (short version without graphic controller) - Support for modules with 'N' type S29GL128N Spansion flashes (requires changes to flash layout) - Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19Fix support for PS/2 keyboard on TQM85xx boardsWolfgang Denk1-0/+2
The PS/2 keyobard driver for the TQM85xx modules only supports the internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't include a DUART, the TQM8560 modules can't be used with the PS/2 keyboard controller on the STK85xx board. The PS/2 keyboard driver should work with the modules TQM8540, TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet. Make sure the PS/2 controller on the STK85xx is programmed. Jumper settings: X66 1-2, 9-10; X61 2-3 Patch by Martin Krause, 21 Jun 2006
2006-07-19Adjust RTC century handling on STK52xx board to match Linux driver.Wolfgang Denk1-0/+2
Patch by Martin Krause, 12 Jun 2006
2006-07-19Enable buffered flash writes for TB5200 board.Wolfgang Denk1-1/+1
2006-07-19Fix some bugs in TRAB board flash driver.Wolfgang Denk1-1/+1
- increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT - remove "Unlock Bypass" mode, because macronix flashes do not support this mode officially - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified for Intel compatible flashes, not for AMD compatible. Patch by Martin Krause, 15 Feb 2006
2006-07-19Add support for TB5200 boardWolfgang Denk4-64/+534
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup
2006-07-18Enable buffered flash writes for TQM5200 board.Wolfgang Denk1-1/+1
2006-07-13Merge with /home/mk/11-cmb1920/u-bootWolfgang Denk4-5/+866
2006-07-13Cleanup duplicate definitions in MCC200 config file.Wolfgang Denk1-5/+0
2006-07-12Add support for TQM885D board.Markus Klotzbuecher3-5/+504
Patch by Martin Krause, 20 Mar 2006 Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12Support for spc1920 board.Markus Klotzbuecher1-0/+362
Patch by Markus Klotzbuecher, 12 Jul 2006
2006-07-11MCC200 board: support console on any one of the Quad UART ports.Wolfgang Denk1-0/+62
2006-07-10Major PCMCIA Cleanup to make code better readable and maintainable.Wolfgang Denk1-0/+10
Notes: - Board-dependend code for RPXLITE and RPXCLASSIC-based boards placed to the drivers/rpx_pmcia.c file to avoid duplication. Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c). - drivers/i82365.c has been split into two parts located at board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are the only boards using CONFIG_82365). - Changes were tested for clean build and *very* *few* boards.
2006-07-06MCC200: map the 2nd Quad UART into the processor's address space.Wolfgang Denk1-0/+5
2006-07-06Fix timer problems on AMCC yucca board.Marian Balakowicz1-1/+1
Set Timer Clock Select to use CPU clock as a timer input source.
2006-07-05Bring yucca config more in line with other AMCC boards.Wolfgang Denk1-29/+33
2006-07-05Merge with /home/m8/git/u-bootWolfgang Denk2-6/+10
2006-07-04Add system memory to the PCI region list for AMCC PPC44x CPUs.Marian Balakowicz1-0/+5
Enabled it for Yucca board.
2006-07-03Cleanup config file and bootup output for Yucca board.Marian Balakowicz2-6/+5
2006-06-30Merge with /home/m8/git/u-bootWolfgang Denk8-1961/+1884
2006-06-30Fix CONFIG_440_GX define usage.Marian Balakowicz1-6/+3
2006-06-30Remove autogenerated bmp_logo.h file.Marian Balakowicz1-1948/+0
2006-06-30Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz7-14/+1888
2006-06-30Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz7-14/+1888
2006-06-26Merge with /home/wd/git/u-boot/masterWolfgang Denk1-17/+17
2006-06-26Cleanup trab board for GCC-4.xWolfgang Denk1-17/+17
2006-06-26Merge with /home/wd/git/u-boot/masterWolfgang Denk11-91/+691
2006-06-20Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk1-24/+32
2006-06-19Add support for wrPPMC7xx/74xx boardsHeiko Schocher2-0/+441
Patch from Richard Danter, 12 Aug 2005
2006-06-19Merge with ssh://fifi/home/wd/git/u-boot/masterWolfgang Denk8-67/+218
2006-06-16Add support for gth2 boardWolfgang Denk2-0/+200
Patch by Thomas Lange, Aug 11 2005
2006-06-16Add support for CONFIG_SERIAL_MULTI on MPC5xxxWolfgang Denk1-1/+1
Patch by Martin Krause, 8 Jun 2006 This patch supports two serial consoles on boards with a MPC5xxx CPU. The console can be switched at runtime by setting stdin, stdout and stderr to the desired serial interface (serial0 or serial1). The PSCs to be used as console port are definded by CONFIG_PSC_CONSOLE and CONFIG_PSC_CONSOLE2. See README.serial_multi for details.
2006-06-16Update configuration for CMC-PU2 boardWolfgang Denk1-10/+1
Patch by Martin Krause, 17 Nov 2005
generated by cgit v1.1 at 2024-07-15 23:19:02 +0000