aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2017-06-22x86: Remove CONFIG_USB_MAX_CONTROLLER_COUNTBin Meng4-10/+0
As all x86 boards have been switched over to use DM USB, remove CONFIG_USB_MAX_CONTROLLER_COUNT which is not used by DM USB. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2017-06-22x86: minnowmax: Configure GPIO pins to turn on USB ports VBUSBin Meng1-0/+1
GPIO bank E pin 8 & 9 are used to control the on-board two USB ports VBUS on/off. Let's configure them in the misc_init_r(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2017-06-21Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini1-5/+0
2017-06-20arm: zynq: Move CONFIG_SF_DUAL_FLASH to defconfigMike Looijmans2-3/+0
Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the associated topic_miamiplus.h header obsolete, so remove that as well. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Check pmufw versionMichal Simek1-0/+2
If PMUFW version is not v0.3 then panic. ZynqMP switch to CCF based clock driver which requires PMUFW to be present at certain version. This patch ensure that you use correct and tested PMUFW binary. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Decrease MALLOC size for SPLMichal Simek1-1/+1
Decrease malloc size to 1MB from 256MB. Huge malloc space is adding huge delay in mem_malloc_init() because we are enabling CONFIG_SYS_MALLOC_CLEAR_ON_INIT which clear the whole malloc space. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: Remove CPU_RELEASE_ADDR macroMichal Simek1-3/+0
CPU_RELEASE_ADDR is used only when CONFIG_ARMV8_MULTIENTRY is enabled. ZynqMP is running ATF which takes care about this that's why no need to have this macro. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19odroid: remove CONFIG_DM_I2C_COMPAT configJaehoon Chung1-5/+0
Remove the CONFIG_DM_I2C_COMPAT config. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-06-16powerpc, 5xx: remove some "5xx" remainsHeiko Schocher1-1/+0
we removed 5xx support. So delete some forgotten remains. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 82xx: remove some missed mpc82xx remainsHeiko Schocher2-3/+0
we removed 82xx support. Missed some 82xx remains, remove them now. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher39-8822/+5
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16arm: ti: Add missing guards to headersSemen Protsenko2-0/+10
To prevent possible double inclusions in future. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: refactor default environmentHannes Schmelzer1-30/+21
For better readability and setup-handling we refactor the default environment. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: cosmetic cleanup of config-headerHannes Schmelzer1-2/+0
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop obsolete CONFIG_LCD_NOSTDOUT from config-headerHannes Schmelzer1-1/+0
This define isn't used anymore in the u-boot source tree, so we drop it from the config header. We drop it also from the 'config_whitelist.txt' Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop bootlogo featureHannes Schmelzer1-11/+0
the BMP logo loading has become obsolete and is not used any more. So we drop the support for it. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: fix MMC bootHannes Schmelzer1-6/+6
since commit 'd5abcf94c7123167725fc22ace342f0d455093c1' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brxre1 board is broken, with this commit we make our board working again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada1-1/+1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-16include: nand: move endif to end of fileMugunthan V N1-2/+2
The terminator endif of ifdef _NAND_H_ should be at the end of file as a fail safe. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-06-14Merge git://git.denx.de/u-boot-mpc85xxTom Rini3-6/+6
2017-06-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini1-49/+0
2017-06-12ARM: tegra: remove Whistler supportStephen Warren1-49/+0
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-06-12powerpc: mpc8568mds: Update board configYork Sun1-3/+3
Enable DHCP command by default. Move environmental variable location to before U-Boot image. Enlarge reserved mem for malloc. Update maintainer. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8544ds: Fix environmental variable locationYork Sun1-2/+2
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8641hpcn: Enable DHCP command and DDR debugYork Sun1-1/+1
Enable DHCP command to make TFTP easier. Enable DDR interactive debug by default. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12arm: am57xx: Keep environment in eMMCSemen Protsenko1-5/+9
Use eMMC (instead of SD card) to store U-Boot environment. Use "reserved" partition for U-Boot environment. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com>
2017-06-12arm: dra7: Increase "bootloader" partition sizeSemen Protsenko1-1/+1
Increase the size of u-boot.img, so that it conforms with new DFU configuration (see commit [1]). [1] 7a53a1a8115b ARM: ti: Update layout for MMC and eMMC (env and dfu) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-12arm: am57xx: Increase "bootloader" partition sizeSemen Protsenko1-1/+1
Increase the size of u-boot.img, so that it conforms with new DFU configuration (see commit [1]). [1] 7a53a1a8115b ARM: ti: Update layout for MMC and eMMC (env and dfu) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-12powerpc, 5xx: remove support for 5xxHeiko Schocher5-437/+1
There was for long time no activity in the 5xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 5xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8260: remove support for mpc8260Heiko Schocher7-1411/+3
There was for long time no activity in the 8260 area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8260, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8xx: remove support for 8xxHeiko Schocher36-6503/+5
There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-10Merge git://git.denx.de/u-boot-dmTom Rini2-1/+3
2017-06-10dm: blk: Fix warning on !CONFIG_BLKTom Rini1-7/+7
When we don't have CONFIG_BLK defined we don't have a forward declaration of struct udevice, and thus get a warning about it on blk_get_from_parent(), which we only have when CONFIG_BLK is set. Move the declaration of blk_get_from_parent() to be with the other CONFIG_BLK parts. Fixes 9f103b9cb5f8 ("dm: blk: Add a way to obtain a block device from ...") Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-10Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini4-0/+21
2017-06-09armv8: Support loading 32-bit OS which is not in the form of FITAlison Wang1-1/+2
As only FIT image is supported now, this patch is to support loading 32-bit uImage, dtb and rootfs separately. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-09am33xx: Finish migration of CONFIG_AM33XX/AM43XXTom Rini3-5/+1
Almost all users of CONFIG_AM33XX/AM43XX have been migrated. Finish moving the last few over to Kconfig, and put all of the boards under the appropriate Kconfig chocie now. This board choice is non-optional, so remove that keyword on am33xx. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09rockchip: Enable the video display bannerSimon Glass1-0/+2
Show the U-Boot banner and board information on the video display during boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09tegra: Enable CP15 initSimon Glass1-1/+1
At present CP15 init is disabled on tegra. Use the correct option so that this init is performed on boot. This enables the instruction cache, for example, which is critical to the machine running at full speed. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-09davinci: omapl138_lcdk: fix tXSNR DDR2 timing valueSekhar Nori1-1/+1
As per the datasheet[1] available for DDR2 part on board the OMAP-L138 LCDK, the tXSNR (exit self refresh to a non-read command) is 137.5 ns. This corresponds to a value of 20 to be written to T_XSNR register field of OMAP-L138's DDR configuration. The DDR2 is at 150 MHz. Fix this. The correct value also appears on the initialization scripts (called CCS GEL files) available on TI's wiki pages[2] [1] http://www.samsung.com/global/business/semiconductor/file/product/ds_k4t1gxx4qf_rev12-0.pdf [2] http://processors.wiki.ti.com/index.php/L138/C6748_Development_Kit_(LCDK)#CCS_XML_.26_GEL_Files Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-09rtc: ds1337: drop "SYS" from config variablesChris Packham2-2/+2
There is some inconsistency between uses of CONFIG_RTC_DS13xx and CONFIG_SYS_RTC_DS13xx. Address this by dropping the "SYS" from these variables. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-09spl: stm32f7: configure for xip bootingVikas Manocha1-7/+5
With xip booting configuration, we don't need to copy the next image (U-Boot or linux xipimage) from flash to sdram area. Flash memory organization is like this: spl-U-Boot: u-boot-spl.bin : 0x0800_0000 U-Boot : u-boot-dtb.bin : 0x0800_8000 linux : xipImage : 0x0800_8000 It is also possible to have U-Boot binary & linux binaries configured at different addresses of flash memory like U-Boot at 0x0800_8000 & linux xipImage at 0x0800_4000. But in any case, spl-U-Boot needs to be compiled for U-Boot as next binary with SPL_OS_BOOT option disabled. By default, spl is configured to boot linux xipImage. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09spl: stm32f7: add kernel boot supportVikas Manocha1-0/+7
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09stm32: stm32f7: add spl build supportVikas Manocha1-1/+21
This commit supports booting from stm32 internal nor flash. spl U-Boot initializes the sdram memory, copies next image (e.g. standard U-Boot) to sdram & then jumps to entry point. Here are the flash memory addresses for U-Boot-spl & standard U-Boot: - spl U-Boot : 0x0800_0000 - standard U-Boot : 0x0800_8000 To compile u-boot without spl: Remove SUPPORT_SPL configuration (arch/arm/mach-stm32/Kconfig) Signed-off-by: Vikas Manocha <vikas.manocha@st.com> [trini: Rework Kconfig logic a bit] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09Fixup bug in PMIC TPS65217 register address definitionBrock Zheng Techyauld Ltd1-0/+1
The addresses of the registers in TI TPS65217 are not continuous. There is a gap between ENABLE(0x16) and DEFUVLO(0x18). No 0x17 register available. Fixup the enum values by adding a 'reserved' placeholder to correct the addresses higher than 0x17. Series-to: Heiko Schocher <hs@denx.de> Signed-off-by: Brock Zheng Techyauld Ltd <yzheng@techyauld.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-06-09power: pmic: lp87565: Add the basic pmic supportKeerthy1-0/+12
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-06-09dm: blk: Add a way to obtain a block device from its parentSimon Glass1-0/+7
Many devices support a child block device (e.g. MMC, USB). Add a convenient way to get this device given the parent device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-09board: ti: AM43XX: Add ddr voltage rail configurationKeerthy1-0/+1
Add ddr voltage rail (dcdc3) configuration. Set the dcdc3 DDR supply to 1.35V. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-07rockchip: board: puma_rk3399: enable BMP_16BPP, BMP_24BPP and BMP_32BPPPhilipp Tomsich1-0/+4
With video output support for the RK3399-Q7 (Puma) available, we want CMD_BMP enabled and the support for 16bit, 24bit and 32bit BMPs defined. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Version-changes: 2 - enable SYS_WHITE_ON_BLACK via defconfig Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07usb: dwc2-otg: make regs_otg (in platdata) a uintptr_tPhilipp Tomsich1-1/+1
The regs_otg field in uintptr_t of the platform data structure for dwc2-otg has thus far been an unsigned int, but will eventually be casted into a void*. This raises the following error with GCC 6.3 and buildman: ../drivers/usb/gadget/dwc2_udc_otg.c: In function 'dwc2_udc_probe': ../drivers/usb/gadget/dwc2_udc_otg.c:821:8: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] reg = (struct dwc2_usbotg_reg *)pdata->regs_otg; ^ This changes regs_otg to a uintptr_t to ensure that it is large enough to hold any valid pointer (and fix the associated warning). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-07rockchip: Add basic support for evb-rv1108 boardAndy Yan1-0/+26
Add basic support for rv1108 evb, whith this patch we can boot into u-boot console. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-08-13 05:13:10 +0000