aboutsummaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)AuthorFilesLines
2020-07-01riscv: Add Sipeed Maix supportSean Anderson1-0/+24
The Sipeed Maix series is a collection of boards built around the RISC-V Kendryte K210 processor. This processor contains several peripherals to accelerate neural network processing and other "ai" tasks. This includes a "KPU" neural network processor, an audio processor supporting beamforming reception, and a digital video port supporting capture and output at VGA resolution. Other peripherals include 8M of sram (accessible with and without caching); remappable pins, including 40 GPIOs; AES, FFT, and SHA256 accelerators; a DMA controller; and I2C, I2S, and SPI controllers. Maix peripherals vary, but include spi flash; on-board usb-serial bridges; ports for cameras, displays, and sd cards; and ESP32 chips. Currently, only the Sipeed Maix Bit V2.0 (bitm) is supported, but the boards are fairly similar. Documentation for Maix boards is located at <http://dl.sipeed.com/MAIX/HDK/>. Documentation for the Kendryte K210 is located at <https://kendryte.com/downloads/>. However, hardware details are rather lacking, so most technical reference has been taken from the standalone sdk located at <https://github.com/kendryte/kendryte-standalone-sdk>. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-06-30Merge tag 'mips-pull-2020-06-29' of ↵Tom Rini1-0/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next - net: pcnet: cleanup and add DM support - Makefile: add rule to build an endian-swapped U-Boot image used by MIPS Malta EL variants - CI: add Qemu tests for MIPS Malta
2020-06-30kconfig: mmc: move pxa_mmc_generic to kconfigMarcel Ziswiler1-7/+0
Move CONFIG_PXA_MMC_GENERIC to Kconfig. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-29net: pcnet: Add Kconfig entriesMarek Vasut1-1/+0
Add Kconfig entries for the pcnet driver and convert MIPS malta to use those. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29net: pcnet: Drop PCNET_HAS_PROMMarek Vasut1-1/+0
All of one PCNET users has this option set, make this default and drop this config option. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-06-29spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX)Lukasz Majewski3-15/+0
This patch moves the CONFIG_DM_SPI_FLASH and CONFIG_SPI_FLASH_DATAFLASH to be defined in Kconfig, not in board specific header file (include/configs/<board>.h). Before this change the CONFIG_DM_SPI_FLASH was not set in .config (so it was not possible to use CONFIG_IS_ENABLED(DM_SPI_FLASH) in SPI DM/DTS converted drivers), but it was set in u-boot.cfg file. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2020-06-29spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)Lukasz Majewski1-2/+0
This patch fixes issue with defining the DM_SPI_FLASH in the configs/include/<board.h> instead of enabling this option in Kconfig. The problem is that CONFIG_IS_ENABLED(DM_SPI_FLASH) shows false as there is no DM_SPI_FLASH=y in .config (but the define is set in u-boot.cfg). As a result conversion of DM_SPI_FLASH to using CONFIG_IS_ENABLED() is not working properly. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2020-06-29Convert CONFIG_CADENCE_QSPI to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_CADENCE_QSPI Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-27rk3399: Add BOOTENV_SF commandJagan Teki1-0/+1
Add missing BOOTENV_SF command in rk3399 config. Fix it. Fixes: f263b860acf8 ("rk3399: Enable SF distro bootcmd") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reported-by: Suniel Mahesh <sunil@amarulasolutions.com> Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-06-26Kconfig: Remove CONFIG_CLOCKS_IN_MHZTom Rini15-29/+0
This variable is unset anywhere and only unset on a number of platforms. Remove all relevant code. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTM_NETBSD to KconfigTom Rini2-6/+0
This converts the following to Kconfig: CONFIG_BOOTM_NETBSD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: imx: Finish migration of CONFIG_CSF_SIZE to KconfigTom Rini5-20/+0
While in most cases CSF_SIZE is handled via Kconfig we have some i.MX8M platforms that set the size based on the now-renamed CONFIG_SECURE_BOOT symbol. Update things so that CSF_SIZE itself depends on IMX_HAB being enabled and provide the default value for i.MX8M family of parts. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Ye Li <ye.li@nxp.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Fixes: d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-06-26nxp: Finish switch to CONFIG_NXP_ESBCTom Rini1-2/+2
There are two remaining users of the CONFIG_SECURE_BOOT symbol that have not been migrated to another symbol. In this case, they should be using CONFIG_NXP_ESBC as their guard. Cc: Vladimir Oltean <olteanv@gmail.com> Fixes: 5536c3c9d0d1 ("freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name") Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_CONSOLE_SCROLL_LINES to KconfigTom Rini6-11/+0
This converts the following to Kconfig: CONFIG_CONSOLE_SCROLL_LINES Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: toradex: Convert CONFIG_CONSOLE_MUX to KconfigTom Rini2-2/+0
This converts the following to Kconfig: CONFIG_CONSOLE_MUX Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-26Convert CONFIG_CONS_INDEX to KconfigTom Rini12-23/+0
This converts the following to Kconfig: CONFIG_CONS_INDEX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_CMDLINE_EDITING to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_CMDLINE_EDITING Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BUILD_TARGET to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_BUILD_TARGET Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOUNCE_BUFFER to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_BOUNCE_BUFFER Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTP_DNS2 to KconfigTom Rini16-20/+0
This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: abb secu1: Convert CONFIG_BOOTDELAY to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_BOOTDELAY Cc: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_BOOTCOUNT_ENV CONFIG_BOOTCOUNT_LIMIT Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOARD_TYPES to KconfigTom Rini2-3/+0
This converts the following to Kconfig: CONFIG_BOARD_TYPES Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BCH to KconfigTom Rini2-4/+0
This converts the following to Kconfig: CONFIG_BCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOOTARGS to KconfigTom Rini9-31/+0
This converts the following to Kconfig: CONFIG_BOOTARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BOARD_EARLY_INIT_F et al to KconfigTom Rini10-18/+0
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_EARLY_INIT_R Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_BAUDRATE to KconfigTom Rini26-45/+0
This converts the following to Kconfig: CONFIG_BAUDRATE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_STOP_STR Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_USART to KconfigTom Rini8-8/+0
This converts the following to Kconfig: CONFIG_ATMEL_USART Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_NAND_HW_PMECC et al to KconfigTom Rini1-7/+0
This converts the following to Kconfig: CONFIG_ATMEL_NAND_HW_PMECC CONFIG_ATMEL_NAND_HWECC CONFIG_NAND_ATMEL CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ATMEL_HLCD to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_ATMEL_HLCD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_AT91_GPIO to KconfigTom Rini9-15/+0
This converts the following to Kconfig: CONFIG_AT91_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ARM_PL180_MMCI to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_ARM_PL180_MMCI Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_ARCH_MISC_INIT to KconfigTom Rini2-3/+0
This converts the following to Kconfig: CONFIG_ARCH_MISC_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-26Convert CONFIG_AM335X_LCD to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_AM335X_LCD Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini13-150/+38
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24arm64: zynqmp: Reduce console buffer sizeT Karthik Reddy1-0/+2
Reduce console buffer size to 1kbyte to accommodate memory allocations in mini u-boot for zynqmp. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-24arm: versal: Fix xspi0 boot modeMichal Simek1-1/+1
Use proper number to be aligned with xspi0 boot mode. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-06-22arm: wandboard: move CONFIG_MXC_UART to defconfigHeinrich Schuchardt1-1/+0
For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in the .config file. To avoid duplicate definitions move the setting from include/configs/wandboard.h to configs/wandboard_defconfig. Document the debug UART settings in the README. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-06-22colibri_imx6: boot env configuration updatesIgor Opaniuk1-28/+1
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22colibri_imx7: boot env configuration updatesIgor Opaniuk1-23/+1
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22apalis_imx6: boot env configuration updatesIgor Opaniuk1-28/+1
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22apalis-tk1: enable distrobootIgor Opaniuk1-37/+14
1. Use distro_bootcmd as default boot command instead of legacy emmcboot wrapper. 2. Drop emmcboot and sdboot wrappers. 3. Provide proper boot order for Distro Boot. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-22configs/colibri_vf.h: drop sdboot in favour of distro_bootcmdMax Krummenacher1-17/+1
The distro bootscript uses kernel_image to get the file name of the kernel, so change that variable name. UBI boot has precedence in the default boot command. If one wants to boot from SD with a working NAND installation stop in U-Boot and enter: setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-06-22colibri-imx6ull/imx7: define bootubipart for distro bootStefan Agner2-0/+2
When using distro boot to boot from UBI volumes the boot partition has been hardcoded to "UBI" (capital letters). However, our default MTD layout uses "ubi" (lower case letter). Define "ubi" as the default UBI partition for distro boot for Toradex. This allows to use distro boot without having to redefine the MTD partition layout which is useful for TorizonCore. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2020-06-22colibri_imx7: add addresses required for distro bootStefan Agner1-1/+2
Define addresses required for full distro boot support. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2020-06-22colibri-imx8x: declare consoleargsOleksandr Suvorov1-4/+4
Store all console-related kernel parameters in dedicated variable. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-06-22mx6cuboxi: Convert to DM_ETHFabio Estevam1-6/+0
Migration to DM_ETH is mandatory, so convert mx6cuboxi to Ethernet Driver Model. This also brings the benefit of restoring Ethernet functionality. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Tom Rini <trini@konsulko.com>
2020-06-20Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini24-26/+0
into next - Convert pcnet and eepro100 ethernet drivers to DM
2020-06-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini1-0/+3
generated by cgit v1.1 at 2024-07-14 09:06:23 +0000