aboutsummaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-06-06Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini43-159/+0
This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_NAND_RAW_ONLY et al to KconfigTom Rini7-14/+0
This converts the following to Kconfig: CONFIG_SPL_NAND_RAW_ONLY CONFIG_SPL_NAND_SOFTECC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_INIT_MINIMAL et al to KconfigTom Rini7-24/+2
This converts the following to Kconfig: CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_FLUSH_IMAGE CONFIG_SPL_SKIP_RELOCATE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CFI_FLASH_STATUS_POLL to KconfigTom Rini2-5/+0
This converts the following to Kconfig: CONFIG_SYS_CFI_FLASH_STATUS_POLL Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_FLASH_CFI_WIDTH to KconfigTom Rini28-34/+0
This converts the following to Kconfig: CONFIG_SYS_FLASH_CFI_WIDTH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06spl: Remove CONFIG_SPL_SATA_BOOT_DEVICETom Rini1-1/+0
This is only referenced in non-SPL_DM cases, of which there are currently none. Remove this option and slightly re-organize the code is there is now never an if/else at the start of spl_sata_load_image() Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06fsl-layerscape: Remove CONFIG_SPL_PBL_PADTom Rini2-3/+0
This option is not referenced in code, remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06P1010RDB: Remove CONFIG_SPL_NAND_MINIMALTom Rini1-1/+0
This symbol is not used anywhere, remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06spl: Remove CONFIG_SPL_BOARD_LOAD_IMAGETom Rini2-4/+0
This symbol has been unused in code for some time now, remove the final references. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespaceTom Rini7-9/+0
This is always defined to 2, and referenced in two places. Move the define to <asm/omap_common.h> and make sure the code that uses this includes that file. Make <asm/arch-omap*/clock.h> not include that file, as we don't need to be doing so. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_BOOTPARAMS_LEN to KconfigTom Rini30-53/+0
This converts the following to Kconfig: CONFIG_SYS_BOOTPARAMS_LEN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_HUSH_INIT_VAR to KconfigTom Rini2-3/+0
This converts the following to Kconfig: CONFIG_HUSH_INIT_VAR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_BARGSIZE to KconfigTom Rini79-164/+6
This converts the following to Kconfig: CONFIG_SYS_BARGSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini156-280/+4
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini56-107/+0
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini113-156/+0
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini3-13/+17
2022-05-26riscv: qemu: Set kernel_comp_addr_r for compressed kernelBin Meng1-4/+6
Set kernel_comp_addr_r and kernel_comp_size for compressed kernel. Adjust existing addresses for ramdisk, so that kernel_comp_addr_r comes before the ramdisk image, since the decompressed kernel size is known to us. This way we can allow big ramdisk image to be loaded. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-26riscv: sifive: unleashed: Set kernel_comp_addr_r for compressed kernelBin Meng1-4/+6
Set kernel_comp_addr_r and kernel_comp_size for compressed kernel. Adjust existing addresses for ramdisk, so that kernel_comp_addr_r comes before the ramdisk image, since the decompressed kernel size is known to us. This way we can allow big ramdisk image to be loaded. Update unleashed.rst to remove the manual environment configuration for compressed kernel boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-26riscv: sifive: unmatched: Adjust for big ramdisk imageBin Meng1-5/+5
Move kernel_comp_addr_r to an address that comes before the ramdisk image, since the decompressed kernel size is known to us. This way we can allow big ramdisk image to be loaded. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2022-05-25Merge tag 'xilinx-for-v2022.07-rc4' of ↵WIP/25May2022Tom Rini1-2/+0
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.07-rc4 zynqmp: - Fix DP PLL configuration for zcu102/zcu106 and SOM - Fix split mode for starting R5s - DT fixes - Remove firmware node for mini configurations - Wire TEE for multi DTB fit image xilinx: - Handle board_get_usable_ram_top(0) properly phy: - Extend psgtr timeout mmc: - Fix mini configuration which misses zynqmp_pm_is_function_supported()
2022-05-23arm: socfpga: Add the terasic de10-standard boardHumberto Naves1-0/+18
Use the de10-nano files as templates for the de10-standard board. The files in qts directory are generated by quartus from the GHRD design. Signed-off-by: Humberto Naves <hsnaves@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2022-05-23ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2Marek Vasut1-0/+113
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-20ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH headerPhilip Oberfichtner1-3/+0
Use phy address from device tree instead of CONFIG_FEC_MXC_PHYADDR from board header. This is required, because the DH picoITX and DRC02 boards require different settings than PDK2. The corresponding 'phy-handle' device tree properties are already there. I tested this change on picoITX and DRC02, but on PDK2 it is untested. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20imx: imx8mp_rsb3720a1: convert to DM_SERIALPeng Fan1-2/+0
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20bosch: Add initial board support for ACCPhilip Oberfichtner1-0/+122
The Bosch ACC (Air Center Control) Board is based on the i.MX6D. The device tree is copied from Linux, see [1]. The only difference compared to the Linux DT is the removal of usbphynop properties. They are defined in the Linux version of imx6qdl.dtsi, but not in the u-boot version. [1] Commit 6192cf8ac082 from git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20imx: imx8mm_edm_sbc: Enable SPL_DM_SERIALPeng Fan1-2/+0
Enable CONFIG_SPL_DM_SERIAL. uart and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx: imx8mm_mx8menlo: Enable DM_SERIALPeng Fan1-3/+0
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20configs: remove FEC_QUIRK_ENET_MAC from imx8m configsTim Harvey15-20/+0
FEC_QUIRK_ENET_MAC is defined in the imx-regs.h include file and thus does not need to be defined in the various board config includes. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20configs: imx8mp_venice: add FEC_QUIRK_ENET_MACTim Harvey1-0/+4
The IMX8MP SoC FEC needs to have the FEC_QUIRK_ENET_MAC defined. Fixes: commit 2395625209cc ("board: gateworks: venice: add imx8mp-venice-gw740x support") Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20configs: imx8m{m, n}_venice: remove unneeded CONFIG_FEC_MXC_PHYADDRTim Harvey2-2/+0
The IMX8M based Venice boards all have device-tree fec nodes that use proper dt with a phy-handle pointing to a phy with reg assigned to the proper phy address. There is no need to keep using the CONFIG_FEC_MXC_PHYADDR hack when a proper dt is used - remove it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-20ARM: imx: imx27: Introduce and use UART_BASE_ADDR(n)Marek Vasut1-1/+1
Introduce helper macro UART_BASE_ADDR(n), which returns Nth UART base address. Convert all board configurations to this new macro. This is the first step toward switching CONFIG_MXC_UART_BASE to Kconfig. This is a clean up, no functional change. The new macro contains compile-time test to verify N is in suitable range. The test works such that it multiplies constant N by constant double-negation of size of a non-empty structure, i.e. it multiplies constant N by constant 1 in each successful compilation case. The non-empty structure may contain C11 _Static_assert(), make use of this and place the kernel variant of static assert in there, so that it performs the compile-time check for N in the correct range. Note that it is not possible to directly use static_assert in compound statements, hence this convoluted construct. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-20ARM: imx: imx8m: Introduce and use UART_BASE_ADDR(n)Marek Vasut21-21/+21
Introduce helper macro UART_BASE_ADDR(n), which returns Nth UART base address. Convert all board configurations to this new macro. This is the first step toward switching CONFIG_MXC_UART_BASE to Kconfig. This is a clean up, no functional change. The new macro contains compile-time test to verify N is in suitable range. The test works such that it multiplies constant N by constant double-negation of size of a non-empty structure, i.e. it multiplies constant N by constant 1 in each successful compilation case. The non-empty structure may contain C11 _Static_assert(), make use of this and place the kernel variant of static assert in there, so that it performs the compile-time check for N in the correct range. Note that it is not possible to directly use static_assert in compound statements, hence this convoluted construct. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-18xilinx: zynqmp: Do not guard SPL_FS_LOAD_PAYLOAD_NAME by SDHCI driverMichal Simek1-2/+0
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME is used by set_dfu_alt_info() for string generation. It doesn't depend on SDHCI because the same file can be stored to other non volatile memories like qspi. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/97434e122c6f8f042330b60d3e8de4c31f3e3f93.1652192580.git.michal.simek@amd.com Link: https://lore.kernel.org/r/718de136c68c9a76fc7b4e536a727f401b05bfb9.1652702625.git.michal.simek@amd.com
2022-05-11Convert CONFIG_MTD_CONCAT to KconfigChris Packham2-2/+0
This converts the following to Kconfig: CONFIG_MTD_CONCAT Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-10Merge tag 'u-boot-stm32-20220510' of ↵WIP/10May2022Tom Rini2-1/+10
https://source.denx.de/u-boot/custodians/u-boot-stm Add new STM32 MCU boards and Documentation STM32 programmer improvements video: support several LTDC HW versions and fix data enable polarity board: fix stboard error message, consider USB cable connected when boot device is USB configs: stm32mp1: set console variable for extlinux.conf configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link ARM: stm32mp: Fix Silicon version handling and ft_system_setup() phy: stm32-usbphyc: Add DT phy tuning support arm: dts: stm32mp15: alignment with v5.18 ram: Conditionally enable ASR mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM pinctrl: stm32: rework GPIO holes management
2022-05-10configs: stm32f746-disco: use CONFIG_DEFAULT_DEVICE_TREE as fdtfilePatrice Chotard1-1/+1
As stm32f46-disco, stm32f769-disco and stm32746g-eval are very similar except their respective device tree file. These 3 boards uses the same TARGET_STM32F746_DISCO flag (so same include/configs/stm32f746-disco.h and same board file board/st/stm32f746-disco/stm32f746-disco.c) To be able to compile these 3 boards, replace the hard-coded device-tree name in include/configs/stm32f746-disco.h by CONFIG_DEFAULT_DEVICE_TREE which is set in each board defconfig file with the correct value. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32f746-disco: Concatenate spl and u-boot binariesPatrice Chotard1-0/+1
This allows to concatenate spl and u-boot binaries together. Previously, both binaries has to be flashed separately at the correct offset (spl at offset 0 and u-boot at offset 0x8000). With this patch, only one binary is generated (u-boot-with-spl.bin) and has to be copied in flash at offset 0 using openocd for example or simply copied in exported mass storage. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32mp1: Add support for baudrates higher than 115200 for st-linkPatrick Delaunay1-0/+5
On STMicroelectronics boards, the UART can reliably go up to 2000000 bauds when connected to the on-board ST-LINK-V2 for STM32MP15 Unfortunately U-Boot will fall back to 115200 unless higher rates are declared via CONFIG_SYS_BAUDRATE_TABLE. This patch add the support of higher baudrates on STMicroelectronics boards with ST-LINK. Cc: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10configs: stm32mp1: set the console variable for extlinux.confPatrick Delaunay1-0/+3
Set the environment variable "console", used in extlinux.conf file when it is generated by YOCTO distribution with: UBOOT_EXTLINUX_CONSOLE ??= "console=${console},${baudrate}" With these 2 variables, U-Boot give dynamically the used console and baudrate in the Linux kernel bootargs. For the STMicroelectronics boards, the used console is ttySTM0. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-09Nokia RX-51: Convert to CONFIG_DM_SERIALPali Rohár1-1/+0
For CONFIG_DM_SERIAL it is required to increase CONFIG_SYS_MALLOC_F_LEN as default value is not enough for memory hungry CONFIG_DM_SERIAL code. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Merlijn Wajer <merlijn@wizzup.org>
2022-05-05include: configs: am**x/j721e/j721s2_evm.h: Move the stack pointer init ↵Aswath Govindraju4-8/+4
address in arm64 Currently, in case of arm64 bootloader and U-Boot the stack pointer is initialized at an offset of NON_SECURE_MSRAM_SIZE from arm64 SPL's text base address. After jumping to arm64, execution is done out of DDR. Therefore, having an offset corresponding to the size of MSRAM does not have any significance. Instead, initialize the stack pointer after an offset of 4MB from the SPL text base address. This helps in allocating larger memory for stack. ┌────────────────────┐0x80080000 │ │ │ arm64 SPL │ ├────────────────────┤ │ ▲ │ │ │ │ │ STACK │ ├────────────────────┤0x80480000 │ Memory for Load │ │ Buffer Allocation │ ├────────────────────┤0x80800000 │ │ │ U-Boot Image │ │ │ └────────────────────┘ Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-05-05arm: nuvoton: Add support for Nuvoton NPCM750 BMCJim Liu1-0/+44
Add basic support for the Nuvoton NPCM750 EVB (Poleg). Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2022-05-04mips: octeon: ebb7304: Enable ethernet supportStefan Roese1-0/+2
This patch enables the Kconfig symbols needed for full ethernet support on the EBB7304. Also the PHY autonegotiation timeout is increased, as the default 5 seconds are sometime a bit short. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big ethernet-mac-nexus@11800e0000000 Waiting for PHY auto negotiation to complete....... done Using ethernet-mac-nexus@11800e0000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.243 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 13.2 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-05-04mips: octeon: octeon_common.h: Move init SP because of increased image sizeStefan Roese1-1/+1
This patch moves CONFIG_SYS_INIT_SP_OFFSET to a higher address so that it does not interfere with larger U-Boot images. This was noticed, while adding network support to the EBB7304 board. Signed-off-by: Stefan Roese <sr@denx.de>
2022-05-02arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM EthernetTony Dinh1-8/+3
The Zyxel NSA310s board has the network chip Marvell Alaska 88E1318S. Use uclass mvgbe and the compatible driver M88E1310 driver to bring up Ethernet. - Use uclass mvgbe to bring up the network. And remove ad-hoc code. - Remove CONFIG_RESET_PHY_R. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Add phy mode RGMII to kirkwood-nsa310s.dts - Miscellaneous changes: Move constants to .c file and remove header file board/zyxel/nsa310s/nsa310s.h, add support for large USB and SATA HDDs, use BIT macro, add/cleanup comments, and cosmetic changes. Note that this patch is depended on the following patch: https://patchwork.ozlabs.org/project/uboot/patch/20220412201820.10291-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-05-02arm: mvebu: turris_mox: Add NVMe and SCSI to boot targetsPali Rohár1-0/+2
U-Boot for Turris Mox has already enabled NVMe and SCSI support. So add NVMe and SCSI to boot targets. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02arm: mvebu: turris_omnia: Add NVMe to boot targetsPali Rohár1-0/+1
U-Boot for Turris Omnia has already enabled NVMe support. So add NVMe to boot targets. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targetsPali Rohár1-21/+3
U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support, so always enable macros for booting from these devices. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENVPali Rohár1-1/+0
CONFIG_ETHPRIME defines primary ethernet device and env variable $ethact stores currently active ethernet device. So there is no point to set ethact= in default environment. Instead set CONFIG_ETHPRIME properly. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
generated by cgit v1.1 at 2024-07-13 19:51:41 +0000