aboutsummaryrefslogtreecommitdiff
path: root/include/configs/socfpga_common.h
AgeCommit message (Collapse)AuthorFilesLines
2022-09-01Convert CONFIG_SYS_L2_PL310 to KconfigPhilip Oberfichtner1-1/+0
This converts CONFIG_SYS_L2_PL310 to Kconfig. For omap2 and mvebu the 'select SYS_L2_PL310' locations were determined using ./tools/moveconfig -i CONFIG_SYS_L2_PL310. For mx6 I manually chose ARCH_MX6 as 'select' location. The correctness has been verified using $ ./tools/moveconfig.py -f ARCH_MX6 ~SYS_L2_PL310 ~SYS_L2CACHE_OFF 0 matches That means whenever an ARCH_MX6 board had SYS_L2_PL310 disabled, this was correctly reflected in SYS_L2CACHE_OFF. Thus it's safe to insert the 'select' statement under ARCH_MX6. Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-07-05watchdog: designware: Make this depend on WDTTom Rini1-1/+0
As this driver can dynamically determine the values set in CONFIG_DW_WDT_BASE when using WDT, so make this depend on WDT rather than migrate CONFIG_DW_WDT_BASE to Kconfig. Cc: Chee Tien Fong <tien.fong.chee@intel.com> Cc: Chin-Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinh.nguyen@intel.com> Cc: Holger Brunck <holger.brunck@hitachienergy.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com> Cc: Stefan Roese <sr@denx.de> Cc: hee Hong Ang <chee.hong.ang@intel.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-05Convert CONFIG_DW_ALTDESCRIPTOR to KconfigTom Rini1-7/+0
This converts the following to Kconfig: CONFIG_DW_ALTDESCRIPTOR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28fpga: Remove CONFIG_FPGA_COUNTTom Rini1-7/+0
This define is only currently used in a single board, and always set to one. Define this within the board code and remove other references. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini1-5/+0
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini1-7/+0
This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_BARGSIZE to KconfigTom Rini1-2/+0
This converts the following to Kconfig: CONFIG_SYS_BARGSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_CBSIZE to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08spi: cadence_qspi: Migrate CONFIG_CQSPI_REF_CLK to KconfigTom Rini1-9/+0
This is a little tricky since SoCFPGA has code to determine this as runtime. Introduce a guard variable for platforms to select if they have a static value to use. Then for ARCH_SOCFPGA, call cm_get_qspi_controller_clk_hz() and otherwise continue the previous behavior. Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCKS to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_CLOCKS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21Convert CONFIG_TIMESTAMP to KconfigSimon Glass1-2/+0
This converts the following to Kconfig: CONFIG_TIMESTAMP Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to KconfigTom Rini1-7/+0
This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_LOCATIONS CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_ONFI_DETECTION to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_BAD_BLOCK_POS to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_NAND_BAD_BLOCK_POS In order to do this, introduce a choice for HAS_LARGE/SMALL_BADBLOCK_POS as those are the only valid values. Use LARGE as the default as no in-tree boards use SMALL, but it is possible. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-04mmc: Rename MMC_SUPPORT to MMCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-06-08usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and ↵WIP/2021-06-08-kconfig-migrationsAswath Govindraju1-1/+0
CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-01-15configs: socfpga: Add CONFIG_SPL_PAD_TOLey Foon Tan1-0/+2
Add CONFIG_SPL_PAD_TO for Gen5 and Arria 10. CONFIG_SPL_PAD_TO is set to size of OCRAM. This is preparation for image padding change in socfpgaimage. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28Convert CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to KconfigAdam Ford1-1/+0
This converts the following to Kconfig: CONFIG_SYS_MMCSD_FS_BOOT_PARTITION Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass1-0/+2
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-08treewide: mem: Move mtest related defines to KconfigAshok Reddy Soma1-2/+0
Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-03-31configs: socfpga: Change to use SOCFPGA_PHYS_OCRAM_SIZE macroLey Foon Tan1-2/+3
Change to use SOCFPGA_PHYS_OCRAM_SIZE macro for onchip RAM size. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-03-01ARM: socfpga: Add missing Denali NAND config optionsMarek Vasut1-0/+1
The Denali SPL shim won't build without these options set, set them accordingly to fix the build error and let the SPL shim to work correctly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-03-01ARM: socfpga: Permit overriding the default timer frequencyMarek Vasut1-1/+2
The default timer rate may be different than 25 MHz, permit overriding the default rate in board configuration file. Ultimatelly, this should be properly handled by a clock driver, however that is not available on Gen5 yet. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-03watchdog: designware: Migrate CONFIG_DESIGNWARE_WATCHDOG to KconfigMarek Vasut1-3/+0
Migrate CONFIG_DESIGNWARE_WATCHDOG to Kconfig and update the headers accordingly, no functional change. The S10 enables the WDT only in SPL, but does not enable it in U-Boot itself, hence disable it in the config again. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Philipp Tomisch <philipp.tomisch@theobroma-systems.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-11-20env: Finish migration of common ENV optionsTom Rini1-9/+1
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-10-25mtd: spi: Clean up usage of CONFIG_SPI_FLASH_MTDFrieder Schrempf1-4/+0
Most boards currently use SPI_FLASH_MTD only in U-Boot proper, not in SPL. They often rely on hacks in the board header files to include this option conditionally. To be able to fix this, we previously introduced a separate option SPL_SPI_FLASH_MTD. Therefore we can now adjust the Makefile and change the code in sf_probe.c and sf_internal.h to use CONFIG_IS_ENABLED(SPI_FLASH_MTD). We also need to move all occurences of CONFIG_SPI_FLASH_MTD from the header files to the according defconfigs. The affected boards are socfpga, aristainetos, cm_fx6, display5, ventana, rcar-gen2, dh_imx6 and da850evm. We do this all in one patch to guarantee bisectibility. This change was tested with buildman to make sure it does not introduce any regressions by comparing the resulting binary sizes. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-10-08watchdog: move WATCHDOG_TIMEOUT_MSECS to KconfigHeiko Schocher1-1/+0
move WATCHDOG_TIMEOUT_MSECS to Kconfig and fix all board defconfigs. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-25Convert CONFIG_SYS_SPI_U_BOOT_OFFS to KconfigHannes Schmelzer1-7/+0
This converts the following to Kconfig: CONFIG_SYS_SPI_U_BOOT_OFFS Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> [trini: Expose this for SPL_SPI_SUNXI for now] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-25moveconfig: prepare moving CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig step 2Hannes Schmelzer1-2/+2
some boards have common headers for several individual build-targets where CONFIG_SYS_SPI_U_BOOT_OFFS is defined even it is not needed (only needed if CONFIG_SPL_SPI_LOAD is defined also). Take this define here under '#ifdef CONFIG_SPL_SPI_LOAD' for having a clean run of moveconfig.py Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-15ARM: socfpga: update CONFIG_SPL_FS_LOAD_PAYLOAD_NAME to u-boot.imgDalon Westergreen1-1/+1
Bring cyclone5 / arria5 / arria10 in line with convention and use u-boot.img as CONFIG_SPL_FS_LOAD_PAYLOAD_NAME. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
2019-04-29configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt1-1/+0
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-25arm: socfpga: remove CONFIG_SYS_BOOTMAPSZSimon Goldschmidt1-2/+0
socfpga_common.h defines CONFIG_SYS_BOOTMAPSZ to 64 MiB. Since having this define overrides the 'bootm_size' env variable for the whole socfpga platform, let's remove this define from socfpga_common.h and instead rely on the 'bootm_size' env variable (which is initialized to 160 MiB in the same file's default env). This gives users the chance to override it in their own environment. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Series-to: Marek Vasut <marex@denx.de> Series-to: u-boot@lists.denx.de Cover-letter: arm: socfpga: clean up socfpga_common.h This series cleans up the include/configs/socfpga_common.h file a bit. It removes some defines that are used nowhere and cleans up some leftovers after various subsystems have been converted to use DM. END
2019-04-25arm: socfpga: clean up socfpga_common.hSimon Goldschmidt1-40/+0
Remove outdated macros and comments (not used any more, outdated due to DM conversion) from socfpga_common.h. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Series-changes: 3 - changed commit message: s/defines/macros and comments/ Series-changes: 2 - remove even more outdated things
2019-04-25arm: socfpga: move vining_fpga to DM_I2CSimon Goldschmidt1-26/+0
All socfpga boards except for vining_fpga use DM_I2C. Enable DM_I2C for this board and set the EEPROM defines via Kconfig (enabling CONFIG_I2C_EEPROM from MISC). Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Series-changes: 2 - added (this) patch to move socfpga_vining to DM_I2C
2019-04-25arm: socfpga: put initial U-Boot stack into DDRSimon Goldschmidt1-22/+20
If SPL post-reloc stage puts the stack into DDR, U-Boot should be able to do that, too. The reason to do so is that this way, U-Boot initial stack can be larger than SPL initial stack. In situations where we want to save the SPL in SRAM for next boot without reloading, this prevents overwriting the SPL DTB in SRAM if U-Boot stack usage gets too high. To achieve this, the malloc definition for a10 is moved up and sligthly changed to ensure CONFIG_SYS_INIT_RAM_SIZE is the remaining available size. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2019-04-25arm: socfpga: fix comment about SPL memory layoutSimon Goldschmidt1-3/+3
The comment about SPL memory layout for socfpga gen5 is outdated: the initial malloc memory is now at the end of the SRAM, gd is below it (see board_init_f_alloc_reserve). Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2019-04-17arm: socfpga: gen5: deassert peripheral reset by defaultSimon Goldschmidt1-0/+1
To keep the current behaviour of taking all peripherals out of reset before booting the OS before removing that code from socfpga gen5 SPL, this enables the new behaviour by default for all gen5 boards by adding the environment variable "socfpga_legacy_reset_compat=1" to the default environment. This can be overridden in board config files or by saving an environment without this variable enabled. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-03-25Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay1-1/+0
This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-16arm: socfpga: make SPL_TEXT_BASE overridableSimon Goldschmidt1-0/+2
To boot from fpga on socfpga gen5, we need to set CONFIG_SPL_TEXT_BASE to 0xC0000000 (hps2fpgaslaves base address). Since converting CONFIG_SPL_TEXT_BASE to Kconfig hasn't been successful so far, let's make this value overridable in socfpga_common.h, so that we can have different board configs override this in socfpga_common.h. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-03-09ARM: socfpga: Fix Arria10 SPI and NAND U-Boot offsetMarek Vasut1-0/+8
The SPL size on Gen5 is 4*64kiB, but on A10 it is 4*256kiB. Handle the difference. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ARM: socfpga: Drop CONFIG_SYS_NAND_BAD_BLOCK_POSMarek Vasut1-1/+0
This is not used anywhere, so drop it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-02-02Kconfig: Migrate CONFIG_BUILD_TARGETJagan Teki1-3/+0
Migrate CONFIG_BUILD_TARGET into Kconfig. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-02-01spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4Tien Fong Chee1-1/+1
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-07-14 13:37:03 +0000