aboutsummaryrefslogtreecommitdiff
path: root/include/configs/P1010RDB.h
AgeCommit message (Collapse)AuthorFilesLines
2022-12-23global: Migrate CONFIG_RESET_VECTOR_ADDRESS to CFGTom Rini1-4/+4
Perform a simple rename of CONFIG_RESET_VECTOR_ADDRESS to CFG_RESET_VECTOR_ADDRESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFGTom Rini1-1/+1
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23global: Remove undef CONFIG_... for unused valuesTom Rini1-1/+0
We have a number of places that undef CONFIG_... while we never reference CONFIG_... in the first place. Remove these lines. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22ddr: fsl: Remove CONFIG_MEM_INIT_VALUETom Rini1-2/+0
The way all of the memory init code here works is that we pass 0xDEADBEEF around for the initial value (as it's a well known 'poison' value and so easily recognized in debuggers, etc). The only point of this CONFIG symbol was to pass in a different value for that purpose. Drop this symbol and cleanup the code slightly. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_L2_CACHE to KconfigTom Rini1-5/+0
This converts the following to Kconfig: CONFIG_L2_CACHE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22global: Remove unused CONFIG symbolsTom Rini1-1/+0
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_HOSTNAME et al to KconfigTom Rini1-4/+1
This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22Convert CONFIG_FLASH_SHOW_PROGRESS to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-07net: tsec: Remove non-DM_ETH support codeTom Rini1-31/+0
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Doing this removes some board support code which was also unused. Finally, this removes some CONFIG symbols that otherwise needed to be migrated to Kconfig, but were unused in code now. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05scripts/config_whitelist.txt: Remove more referenced symbolsTom Rini1-2/+0
Perform some deeper investigation on the remaining symbols listed in this file and remove more. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_RTC_DS1337 et al to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_RTC_DS1337 CONFIG_RTC_DS1337_NOOSC CONFIG_RTC_DS1338 CONFIG_RTC_DS1374 CONFIG_RTC_DS3231 CONFIG_RTC_MC13XXX CONFIG_RTC_MXS CONFIG_RTC_PT7C4338 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_HWCONFIG to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_HWCONFIG Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini1-73/+73
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini1-2/+2
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*Tom Rini1-12/+12
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*Tom Rini1-3/+3
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550 namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Convert CONFIG_SYS_NS16550_MEM32 et al to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_SPL_NS16550_MIN_FUNCTIONS CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE CONFIG_SYS_NS16550_SERIAL To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that platforms can enable the legacy driver here for SPL. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05powerpc: Rename CONFIG_NS16550_MIN_FUNCTIONSTom Rini1-3/+1
This symbol is specific to the PowerPC SPL implementation, so rename this to reflect that it's in SPL and used / tested there, so that we can then safely migrate it to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NOR_* to CFG_SYS_NOR_*Tom Rini1-21/+21
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NOR namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*Tom Rini1-39/+39
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05Remove unused symbolsTom Rini1-2/+0
This commit removes the following unused symbols: CONFIG_SYS_NAND_DDR_LAW CONFIG_SYS_NAND_ECCSTEPS CONFIG_SYS_NAND_ECCTOTAL CONFIG_SYS_NAND_ENABLE_PIN_SPL CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES CONFIG_SYS_NAND_U_BOOT_RELOC_SP Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespaceTom Rini1-1/+1
Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10global: Migrate CONFIG_SYS_MPC8* symbols to the CFG_SYS namespaceTom Rini1-1/+1
Migrate all of COFIG_SYS_MPC* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini1-2/+0
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_MAX_NAND_DEVICE to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_MAX_NAND_DEVICE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_SYS_LOADS_BAUD_CHANGE CONFIG_LOADS_ECHO As part of this, we move CMD_SAVES to be after CMD_LOADS as they are logically related (load or save an s-record format file) and this makes grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10powerpc: Migrate SYS_L2_SIZE to KconfigTom Rini1-3/+0
Introduce two options, one for each observed L2 cache size, and have the size select'd as needed. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_INIT_RAM_LOCK to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_INIT_RAM_LOCK Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-01Convert CONFIG_SYS_I2C_EEPROM_CCID et al to KconfigTom Rini1-4/+0
This converts the following to Kconfig: CONFIG_SYS_I2C_EEPROM_CCID CONFIG_SYS_I2C_EEPROM_NXID CONFIG_SYS_EEPROM_BUS_NUM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_QUIET_TEST to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_FLASH_QUIET_TEST Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_MAX_FLASH_SECT to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_MAX_FLASH_SECT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_ERASE_TOUT et al to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_SYS_FLASH_ERASE_TOUT CONFIG_SYS_FLASH_LOCK_TOUT CONFIG_SYS_FLASH_UNLOCK_TOUT CONFIG_SYS_FLASH_WRITE_TOUT In practice, for two m68k platforms we move to hard-coding with a comment the timeout values, rather than try and make convoluted Kconfig logic. We add options for the write and erase options to the pic32 flash driver, as this driver does make use of them. Everywhere else these are unreferenced values. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_CHECKSUM to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_FLASH_CHECKSUM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04P1010RDB: Drop support for not-CONFIG_SYS_DDR_RAW_TIMINGTom Rini1-37/+0
All platforms today define CONFIG_SYS_DDR_RAW_TIMING, so drop the code for this option being unset. Cc: Qiang Zhao <qiang.zhao@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-04Convert CONFIG_SYS_FLASH_EMPTY_INFO to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_FLASH_EMPTY_INFO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-08powerpc: Use the poison value of 0xdeadbeef directly in DDR initTom Rini1-1/+0
On p1_p2_rdb_pc platforms, we set ddr_data_init to the "poison" value of 0xdeadbeef rather than a real calculated / derived value. Do this directly and comment rather than via CONFIG. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_BOOTM_LEN to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_SYS_RAMBOOT to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_SYS_RAMBOOT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_SCAN_SHOW to KconfigTom Rini1-2/+0
This converts the following to Kconfig: CONFIG_PCI_SCAN_SHOW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCIE1 et al to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_PCIE1 CONFIG_PCIE2 CONFIG_PCIE3 CONFIG_PCIE4 CONFIG_PCI1 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to KconfigTom Rini1-3/+1
This converts the following to Kconfig: CONFIG_FSL_FIXED_MMC_LOCATION CONFIG_ESDHC_HC_BLK_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05powerpc: Clean up CHAIN_OF_TRUST related optionsTom Rini1-3/+1
As things stand currently, there is only one PowerPC platform that enables the options for CHAIN_OF_TRUST. From the board header files, remove a number of never-set options. Remove board specific values from arch/powerpc/include/asm/fsl_secure_boot.h as well. Rework include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for constructing CHAIN_BOOT_CMD. Migrate all of the configurable addresses to Kconfig. If any platforms are re-introduced with secure boot support, everything required should still be here, but now in Kconfig, or requires migration of an option to Kconfig. Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_DDR_RAW_TIMING to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_DDR_RAW_TIMING Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_SPD_BUS_NUM to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_SYS_SPD_BUS_NUM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_ENABLE_36BIT_PHYS to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_ENABLE_36BIT_PHYS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_ENV_RANGE to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_ENV_RANGE Now that this is in Kconfig we can enforce a minimum size and so remove the check in C code to ensure range is larger than size. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to KconfigTom Rini1-7/+0
This converts the following to Kconfig: CONFIG_SYS_MPC85XX_NO_RESETVEC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini1-6/+0
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_FSL_SATA_V2 to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_FSL_SATA_V2 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28ata: fsl_sata: Remove legacy non-BLK codeTom Rini1-7/+0
The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-09-16 04:32:39 +0000