aboutsummaryrefslogtreecommitdiff
path: root/env
AgeCommit message (Collapse)AuthorFilesLines
2019-12-04mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selectedMiquel Raynal1-0/+2
UBI must be enabled when the environment is in UBI. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-12-02common: Move old EEPROM functions into a new headerSimon Glass1-0/+1
These functions do not use driver model but are still used. Move them to a new eeprom.h header file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move sorting functions to their own header fileSimon Glass1-0/+1
These don't need to be in common.h so move them out into a new header. Also add some missing comments. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02crc32: Use the crc.h header for crc functionsSimon Glass7-0/+7
Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-20env: Finish migration of common ENV optionsTom Rini5-18/+30
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-20env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND checkTom Rini5-23/+1
We have CONFIG_ENV_SIZE_IS_REDUND but don't really use it. We have one board where we can simply multiple CONFIG_ENV_SIZE by two for the same result. The other place where we could but were not previously using this is for where env_internal.h checks for if we should set ENV_IS_EMBEDDED. This seems like the most likely use, historically, of the variable, but it was not used. Add logic to check for this now. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini1-0/+6
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-12defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENTTom Rini1-7/+11
Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-16ubi: env: fix redundand managementPhilippe Reynes1-0/+6
We check (with a #if defined()) the config ENV_UBI_VOLUME_REDUND to know if there is a redundant env. But this config is a string and is always defined with env is in ubi, so we always consider that a redundand env is used. To fix this issue, I've added a hidden flag ENV_UBI_IS_VOLUME_REDUND that is true when ENV_UBI_VOLUME_REDUND is not "". Then, I check this flag in the code, instead of the string ENV_UBI_VOLUME_REDUND. hs: fixed typo s/condider/consider Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-10-08env: Kconfig: Add environment default offset in versalT Karthik Reddy1-2/+3
This patch adds default offset & sector size values for environment variables to save in qspi/ospi flash for versal. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-04Revert "env: solve compilation error in SPL"Tom Rini1-6/+1
This reverts commit 7d4776545b0f8a8827e5d061206faf61c9ba6ea9. The changes here break environment validation and furthermore do not seem to be required. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Rename environment.h to env_internal.hSimon Glass18-18/+18
This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-11env: Drop the ACTION typedefSimon Glass2-2/+2
Avoid using a typedef here which is unnecessary. Add an 'env_' prefix to both the enum and its members to make it clear that these are related to the environment. Add an ENV prefix to these two flags so that it is clear what they relate to. Also move them to env.h since they are part of the public API. Use an enum rather than a #define to tie them together. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Rename the redundancy flagsSimon Glass3-16/+18
Add an ENV prefix to these two flags so that it is clear what they relate to. Also move them to env.h since they are part of the public API. Use an enum rather than a #define to tie them together. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Drop the ENTRY typedefSimon Glass3-9/+9
U-Boot is not supposed to use typedef for structs anymore. Also this name is the same as the ENTRY() macro used in assembler files, and 'entry' itself is widely used in U-Boot (>8k matches). Drop the typedef and rename the struct to env_entry to reduce confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_valid to env.hSimon Glass2-0/+2
This enum is somewhat widely used to determine if the environment is valid or not. Move it to the common environment header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Rename environment to embedded_environmentSimon Glass1-1/+1
The name 'environment' is widely used in U-Boot so is not a very useful name of a variable. Rename it to better indicate its purpose. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11env: Move get/set_default_env() to env.hSimon Glass8-23/+30
Move these functions to the new header file and rename set_default_env() to env_set_default() so that it has a consistent env_ prefix. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move set_default_vars to env.hSimon Glass1-1/+1
Move this function to the new header file and rename it so it has an env_ prefix. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get() to env.hSimon Glass3-0/+3
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass1-0/+1
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_relocate() to env.hSimon Glass1-0/+1
Move env_relocate() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_init() to env.hSimon Glass1-0/+1
Move env_init() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-18env: mmc: add erase-functionFrank Wunderlich1-0/+51
this adds erase environment for mmc storage squashed fixes: - add CONFIG_CMD_ERASEENV - env: erase redundant offset if defined - changes mentioned by Simon - fix whitespaces around errmsg Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-18env: register erase commandFrank Wunderlich1-0/+30
this patch adds basic changes for adding a erase-subcommand to env with this command the environment stored on non-volatile storage written by saveenv can be cleared. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> squashed fixes - start message with "Erasing" - mark erase-function as optional - env: separate eraseenv from saveenv Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-07-12stm32mp1: move CONFIG_ENV in KconfigPatrick Delaunay1-3/+2
Move 2 ENV configuration flags in board Kconfig - CONFIG_ENV_SECT_SIZE - CONFIG_ENV_OFFSET Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-09env: ubi: support configurable VID offsetHamish Guthrie2-4/+20
Introduce KConfig CONFIG_ENV_UBI_VID_OFFSET to allow providing custom VID header offsets for the environment on UBI. Signed-off-by: Hamish Guthrie <hamish.guthrie@kistler.com> Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-07-09at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigsMarkus Klotzbuecher1-4/+7
Enable the extended ENV options for AT91 and OMAP2PLUS in order to be able to use CONFIG_ENV_UBI_* on these architectures. As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE, ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to KConfig. This migration was run using an extended moveconfig.py which evaluates expressions such as "(512 << 10)". See patch ("moveconfig: expand simple expressions"). All modified boards were built with SOURCE_DATE_EPOCH=0 before and after the change and successfully confirmed that the identical binary is generated (the only exception was igep00x0, which does not define CONFIG_ENV_IS_IN_UBI in the original board header. Once that is defined, the test passes too). hs: rebased patch to: 68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT" Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
2019-07-09env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUNDMarkus Klotzbuecher1-0/+6
Introduce the KConfig option CONFIG_ENV_UBI_VOLUME_REDUND for defining the name of the UBI volume used to store the redundant environment. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> hs: get rid of stm32mp1* build errors
2019-06-17Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini1-1/+1
- Drop zipitz2 board (Tom) - Add DEPRECATED option (Tom) - Mark legacy or non-dm drivers as DEPRECATED (Jagan)
2019-06-13Kconfig: Add SPI / SPI_FLASH as dependenciesTom Rini1-1/+1
In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this in the Kconfigs. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-06env: allow ENV_IS_NOWHERE with other storage targetPatrice Chotard1-12/+6
Allow U-Boot to get default environment for some boot mode (USB for example), and to select storage location when it is booting from flash device; ENVL_NOWHERE is present in env_locations with other one. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-06env: ext4: Allow overriding interface, device and partitionPatrice Chotard1-13/+21
For platform which can boot on different device, this allows to override interface, device and partition from board code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-05-23env: solve compilation error in SPLPatrick Delaunay1-1/+6
Solve compilation issue when cli_simple.o is used in SPL and CONFIG_SPL_ENV_SUPPORT is not defined. env/built-in.o:(.data.env_htab+0xc): undefined reference to `env_flags_validate' u-boot/scripts/Makefile.spl:384: recipe for target 'spl/u-boot-spl' failed make[2]: *** [spl/u-boot-spl] Error 1 u-boot/Makefile:1649: recipe for target 'spl/u-boot-spl' failed make[1]: *** [spl/u-boot-spl] Error 2 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: Move ENV_SIZE and ENV_OFFSET to KconfigPatrick Delaunay1-1/+1
Add arch stm32mp for ENV migration step and drop more items from include/configs/xxx.h. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-09env: spi: Fix incorrect entry descriptionMarek Vasut1-2/+2
Fix the max frequency entry description, it's incorrect. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Rini <trini@konsulko.com>
2019-04-12env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL buildMartyn Welch1-1/+1
When booting using an SPL on am335x, if we want to support booting with the boot ROM loader via USB (which uses RNDIS, making bootp and tftp calls) we need to enable gadget eth in the SPL to load the main U-Boot image. To enable CONFIG_SPL_ETH_SUPPORT, we must enable CONFIG_SPL_ENV_SUPPORT as the environment is used by the eth support, but we don't actually need to have environment variables saved in the SPL environment. We do however have environment variables saved in the main U-Boot image and enable CONFIG_ENV_OFFSET_REDUND (we are storing in raw NAND). In such instances, even with the build config enabling both CONFIG_CMD_SAVEENV and CONFIG_CMD_NAND, these options aren't set when building the SPL, but CONFIG_ENV_OFFSET_REDUND still is. Don't check this configuration option for SPL builds to enable the above configuration. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-04-09fs: ext4: Add support for the creation of symbolic linksJean-Jacques Hiblot1-1/+1
Re-use the functions used to write/create a file, to support creation of a symbolic link. The difference with a regular file are small: - The inode mode is flagged with S_IFLNK instead of S_IFREG - The ext2_dirent's filetype is FILETYPE_SYMLINK instead of FILETYPE_REG - Instead of storing the content of a file in allocated blocks, the path to the target is stored. And if the target's path is short enough, no block is allocated and the target's path is stored in ext2_inode.b.symlink As with regulars files, if a file/symlink with the same name exits, it is unlinked first and then re-created. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix ext4 env code] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-03-25Convert CONFIG_ENV_SPI_* to KconfigPatrick Delaunay2-20/+46
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-13Revert "env: add spi_flash_read_env function"Heiko Schocher1-45/+11
This reverts commit 9a9d66f5eff0f443de4c2c6ca3e27771ed14b1b4. because it breaks fw_setenv and U-Boot interworking, if U-Boot environment is stored in a SPI-NOR. Reproduce it with: boot linux with empty Environment and store a variable with fw_setenv into it, the Environment is now filled with 0xff: root@ckey5e:10:8e:~# hexdump -C /dev/mtd4 00000000 e9 e8 07 fa 01 62 6f 6f 74 63 6d 64 3d 72 75 6e |.....bootcmd=run| [...] 00000f30 7d 00 75 62 69 62 6f 6f 74 76 6f 6c 3d 32 00 00 |}.ubibootvol=2..| 00000f40 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| Boot now U-Boot prints: Loading Environment from SPI Flash... SF: Detected s25fl128l with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment Reason is the above commit, as it only reads until \0\0 is found, and assumes the rest of the Environment space is filled with 0x00, which is not the case when saving an Environment under linux with fw_setenv. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2019-01-26Merge branch '2019-01-25-master-imports'Tom Rini2-8/+21
- snapdragon 820c improvements - poplar updates - DFU + SPL cleanups - Improve the mediatek mmc driver - Other minor cleanups / improvements
2019-01-26env: Fix saving environment to "bad CRC" locationSam Protsenko1-6/+19
In case when the environment on some location is malformed (CRC isn't matching), there is a chance we won't be able to save the environment to that location. For example, consider the case when we only have the environment on eMMC, but it's zeroed out. In that case, we won't be able to "env save" to it, because of "bad CRC" error. That's happening because in env_load() function we consider malformed environment as incorrect one, and defaulting to the location with highest (0) priority, which can be different from one we are dealing with right now (e.g., highest priority can be ENV_FAT on SD card, which is not inserted, but we want to use ENV_MMC on eMMC, where we were booted from). This issue began to reproduce after commit d30ba2315ae3 ("u-boot: remove driver lookup loop from env_save()") on BeagleBone Black, but that commit didn't introduce the wrong logic, it just changed the behavior for default location to use, merely revealing this issue. To fix that, let's implement next logic in env_load(): 1. Try to find out correct environment; if found -- use it 2. If working environment wasn't found, but we found malformed one (with bad CRC), let's use it for further "env save". But make sure to use malformed environment location with highest priority. 3. If neither correct nor malformed environment was found, let's default to environment location with highest priority (0) Steps to reproduce mentioned issue on BeagleBone Black (fixed in this patch): 1. Boot from SD card and erase eMMC in U-Boot shell: => mmc dev 1 => mmc erase 0 100000 => gpt write mmc 1 $partitions 2. Write new SPL and U-Boot to eMMC; the rest of eMMC will stay filled with zeroes 3. Boot from eMMC; try to do: => env save 4. Observe the error (incorrect behavior). Correct behavior: environment should be stored correctly on eMMC, in spite of it has "bad CRC" Fixes: d30ba2315ae3 ("u-boot: remove driver lookup loop from env_save()") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-26env: common: Return specific error code on bad CRCSam Protsenko1-2/+2
Callers of env_import*() functions might want to check the case when we have incorrect environment (with bad CRC). For example, when environment location is being defined in env_load(), call chain may look like this: env_load() -> drv->load() = env_mmc_load() -> env_import() Return code will be passed from env_import() all way up to env_load(). Right now both env_mmc_load() and env_import() return -EIO error code, so env_load() can't differentiate between two cases: 1. Driver reports the error, because device is not accessible 2. Device is actually accessible, but environment is broken Let's return -ENOMSG in env_import(), so we can distinguish two cases mentioned above. It will make it possible to continue working with "bad CRC" environment (like doing "env save"), instead of considering it not functional (implemented in subsequent patch). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-01-25ARC: Move ENV_SIZE and ENV_OFFSET to KconfigAlexey Brodkin1-1/+3
Join the party of some ARM boards and drop more items from include/configs/xxx.h. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-21Revert "env: sf: fix environment in SPI NOR"Tom Rini1-1/+1
Per Heiko the original changes were correct and something is misbehaving on his hardware. This reverts commit 3d5931e5986a49c44cdab845c6751d845812e8d8. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-18env: sf: fix environment in SPI NORHeiko Schocher1-1/+1
commit 9a9d66f5eff0 ("env: add spi_flash_read_env function") breaks Environment functionality, as it reads only until 2 \0 are found, but fills the buffer with 0x0 instead 0xff which leads in an incorrect crc sum. Fix: init the read buffer with 0xff instead 0x00 Signed-off-by: Heiko Schocher <hs@denx.de>
2019-01-16env: add spi_flash_read_env functionHoratiu Vultur1-11/+45
The spi_flash_read_env function is a wrapper over spi_flash_read, which enables the env to read multiple flash page size from flash until '\0\0' is read or the end of env partition is reached. Instead of reading the entire env size. When it reads '\0\0', it stops reading further the env and assumes that the rest of env is '\0'. This is an optimization for large environments that contain few bytes environment variables. In this case it doesn't need to read the entire environment and only few pages. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-15common: command: Add support for $ auto-completionBoris Brezillon1-4/+48
Add the dollar_complete() function to auto-complete arguments starting with a '$' and use it in the cmd_auto_complete() path such that all args starting with a $ can be auto-completed based on the available env vars. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Fix some linking problems] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-09env: sata: Fix saveenv issueYe Li1-1/+1
Wrong env buffer was passed into sata write function, cause the saveenv not work. Signed-off-by: Ye Li <ye.li@nxp.com>
2019-01-09env: sata: Add missed env location for SATA bootYe Li1-0/+3
The env location label ENVL_ESATA is missed in location tables, so when we configure the ENV in SATA, u-boot fails to get correct env location and cause boot hang in board_f. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>