aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-08-11Convert CONFIG_CMD_TCA642X to KconfigSimon Glass1-0/+9
This converts the following to Kconfig: CONFIG_CMD_TCA642X Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11gpio: Drop sx151x driverSimon Glass2-243/+0
This driver is not used in U-Boot. Drop it and its associated CONFIG options. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11Kconfig; Drop CONFIG_IDE_TI_CARDBUS and associated driverSimon Glass2-624/+0
This driver is not used by any board. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11Kconfig: Drop CONFIG_CMD_PCA953X_INFOSimon Glass1-8/+0
It does not seem worth having an option to enable another sub-command in this legacy driver. Drop this option so that the sub-command is always available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11Convert CONFIG_CMD_PCA953X to KconfigSimon Glass1-0/+9
This converts the following to Kconfig: CONFIG_CMD_PCA953X Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini3-4/+14
2017-08-10Merge git://git.denx.de/u-boot-i2cTom Rini4-4/+32
2017-08-10i2c: designware: Allow sending restart conditionsMarek Vasut1-1/+2
Allow sending restart conditions upon direction change as this is required by some chips. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denxx.de>
2017-08-10Convert CONFIG_SYS_I2C_OMAP24XX to KconfigAdam Ford1-0/+6
This converts the following to Kconfig: CONFIG_SYS_I2C_OMAP24XX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-08-10net: mvpp2x: Set BM poll size once during priv probeStefan Chulski1-4/+1
Set BM poll size once during priv probe and do not overwrite it during port probe procedure. Pool is common for all CP ports. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: remove TX drain from transmit routineStefan Chulski1-21/+0
TX drain in transmit procedure could cause issues due to race between drain procedure and transmition of descriptor between AGGR TXQ and physical TXQ. TXQ will be cleared before moving to Linux by stop procedure. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: Set BM pool high addressStefan Chulski1-0/+6
MVPP22 driver support 64 Bit arch and require BM pool high address configuration. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: Remove IRQ configuration from U-BootStefan Chulski1-45/+1
Remove IRQ configuration from U-Boot PP driver. U-Boot don't use interrupts and configuration of IRQ in U-Boot caused crashes in Linux shared interrupt mode. Also interrupt use is redundant in RX routine since a single RX queue is used. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: remove MBUS configurations from MvPP22 driverStefan Chulski1-5/+6
MBUS driver were replaced by AXI in PPv22 and relevant only for PPv21. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNKStefan Chulski1-2/+2
U-boot use single physical tx queue with size 16 descriptors. So aggregated tx queue size should be equal to physical tx queue and cpu descriptor chunk(number of descriptors delivered from physical tx queue to aggregated tx queue by one chunk) shouldn't be larger than physical tx queue. Fix: Set AGGR_TXQ and CPU_DESC_CHUNK to be 16 descriptors, same as physical TXQ. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: fix BM configuration overrun issueStefan Chulski1-8/+17
Issue: BM counters were overrun by probe that called per Network interface and caused release of wrong number of buffers during remove procedure. Fix: Use probe_done and num_ports to call init and remove procedure once per communication controller. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: Enable GoP packet padding in TXStefan Chulski1-12/+0
This patch enables padding of packets shorter than 64B in TX(set by default). Disabling of padding causes crashes on MACCIATO board. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: fix phy connected to wrong mdio issueStefan Chulski1-1/+25
A8K marvell SoC has two South Bridge communication controllers(CP0 and CP1). Each communication controller has packet processor ports and MDIO. On MACHIATOBin board ports from CP1 are connected to mdio on CP0. Issue: Wrong base address is assigned to MDIO interface during probe. Fix: Get MDIO address from PHY handler parent base address. This should be refined in the future when MDIO driver is implemented. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-10net: mvpp2x: Add GPIO configuration supportStefan Chulski1-0/+31
This patch add GPIO configuration support in mvpp2x driver. Driver will handle 10G SFP gpio reset and SFP TX disable. GPIO pins should be set in device tree. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-08-09driver: net: fsl-mc: fsl_mc_ldpaa_exit exit earlier if dpl appliedSantan Kumar1-2/+9
In fsl_mc_ldpaa_exit(), in case of mc is booted and dpl is applied, it should return earlier without executing dpbp_exit(). Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Acked-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-09mmc: fsl_esdhc: not always setting esdhc fdt status to okayYang Li1-2/+0
We shouldn't always change the status to okay. There could be situations that the esdhc is intentionally disabled in the device tree. Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-09PCI: layerscape: Fix assigning wrong address to LS2088A pcie cfg1 spaceHou Zhiqiang1-0/+3
This bug is brought by the commit 3d8553f0a3 (pci: layerscape: add LS2088A series SoC pcie support), which only updated cfg_res.start and did not update the .end field. This causes fdt_resource_size() getting wrong value when calculate the cfg1 space address. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [YS: Revise subject and commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-08-09driver: mmc: fsl_esdhc: Fix compiling warningYork Sun1-0/+2
Commit 4483b7eb added variable vqmmc_dev but only uses it under CONFIG_DM_REGULATOR. Add the same macro to variable declaration to get rid of compiling warning. Signed-off-by: York Sun <york.sun@nxp.com>
2017-08-09Configs: Migrate CONFIG_SYS_I2C_OMAP34XX to CONFIG_SYS_I2C_OMAP24XXAdam Ford1-1/+0
The driver is for all boards 24XX and up, so let's eliminate the extra option called CONFIG_SYS_I2C_OMAP34XX since the driver checks for CONFIG_OMAP34XX we don't need CONFIG_SYS_I2C_OMAP34XX. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-08-09i2c: at91: Add missing probe function to device driverWenyou.Yang@microchip.com1-2/+24
Add missing probe function to the device driver to active a device. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-08-07Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini11-319/+480
2017-08-07net: phy: micrel: add an option to disable gigabit for the KSZ9031Sebastien Bourdelin1-0/+28
The environment variable "disable_giga" can now be used to disable 1000baseTx on the Micrel's KSZ9031. Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07net: phy: Add AFE settings to the Broadcom Cygnus phyArun Parameswaran1-1/+63
Added the AFE (Analog Front End) settings for stability to the Broadcom Cygnus phy. This improves the time take to perform auto negotiation. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07net: move Broadcom SF2 driver to KconfigSuji Velupillai2-2/+24
move to Kconfig: CONFIG_BCM_SF2_ETH CONFIG_BCM_SF2_ETH_DEFAULT_PORT CONFIG_BCM_SF2_ETH_GMAC Also modified defconfigs of all platforms that use these configs. Signed-off-by: Suji Velupillai <suji.velupillai@broadcom.com> Tested-by: Suji Velupillai <suji.velupillai@broadcom.com> Reviewed-by: JD Zheng <jiandong.zheng@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Steve Rae <steve.rae@raedomain.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07net: phy: Hide Micrel KSZ9021 and KSZ9031 Kconfig optionsAlexandru Gagniuc1-22/+2
The correct option is PHY_MICREL_KSZ90X1, but some configs still select the 9021 and 9031 options, which are deprecated. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07net: phy: micrel: Remove ksz90x1 drivers from micrel_ksz8xxxAlexandru Gagniuc1-357/+1
There should be no longer be any ksz9000 users that pick up the PHY driver from ksz8xxx, so remove ksz9000 remnants from there. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 driversAlexandru Gagniuc5-7/+406
The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they share the same ID. Drivers for bothe PHYs cannot safely coexist, so the solution was to use #ifdefs to select between the two drivers. As a result KSZ9031, which has a unique ID, is now caught in the crossfire. Unless CONFIG_PHY_MICREL_KSZ9031 is defined, the KSZ9031 will not function properly, as some essential configuration code is ifdef'd-out. To prevent such situations, move the KSZ9000 drivers to a separate file, and place them under a separate Kconfig option. While it is possible to enable both KSZ8000 and KSZ9000 drivers at the same time, the assumption is that it is highly unlikely for a system to contain both a KSZ8000 and a KSZ9000 PHY, and that only one of the drivers will be enabled at any given time. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07net: phy: Remove duplicate Kconfig selection for Micrel KSZ9021Alexandru Gagniuc1-8/+0
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07net: ag7xxx: Propagate errors on phy accessJoe Hershberger1-5/+24
Don't wait forever. Pass errors back to the caller. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Marek Vasut <marex@denx.de>
2017-08-07net: ag7xxx: Comment register namesJoe Hershberger1-0/+16
The register constants don't use the exact names that are used in the TRM, so add comments that use the exact names so that it is clear what register is being referred to. https://www.atheros-drivers.com/qualcomm-atheros-datasheets-for-AR9331.html Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Marek Vasut <marex@denx.de>
2017-08-07net: usb: r8152: fix "duplicate 'const' declaration specifier"Philipp Tomsich1-2/+2
After upgrading to GCC 7.1, the duplicate const specifies in the r8152 driver trigger the following build warnings with buildman (observed on a 'buildman rockchip' test):: ../drivers/usb/eth/r8152.c:62:35: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] static const struct r8152_version const r8152_versions[] = { ^~~~~ This commit fixes these by removing the duplicate 'const' specifier from the declarations. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07drivers/net/phy/fixed: do not overwrite addrChristian Gmeiner1-1/+0
phy_device_create(..) sets the addr of phy_device with a sane value. There is no need overwrite it. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07rockchip: video: Makefile: Add soc specific driver for rk3288 mipi dsieric.gao@rock-chips.com1-0/+1
Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07rockchip: video: mipi: Add rk3288 soc specific driver for mipi dsieric.gao@rock-chips.com2-1/+192
Add rk3288 soc specific driver for mipi dsi. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07rockchop: video: mipi: Makefile: Add soc specfic driver for rk3399 mipi dsieric.gao@rock-chips.com1-1/+2
Add Makefile item for soc specific driver for rk3399 mipi dsi. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-07rockchip: video: mipi: Split mipi driver into common and specific partseric.gao@rock-chips.com3-164/+220
To compatible with different rockchip soc, we split the mipi dirver into common and soc specific parts, and all the soc share the common functions from common driver part. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [agust: fix build breakage and warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-07video: Drop the ct69000 driverBin Meng4-1208/+2
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07video: Drop the sm501 driverBin Meng2-226/+0
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07video: Drop the sed156x driverBin Meng2-547/+0
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-07video: Drop the l5f31188 driverBin Meng2-193/+0
This is not used in U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-04Merge tag 'xilinx-for-v2017.09' of git://www.denx.de/git/u-boot-microblazeTom Rini2-162/+556
Xilinx changes for v2017.09 Zynq: - Add Z-Turn board support fpga: - Remove intermediate buffer from code Zynqmp: - dts cleanup - change psu_init handling - Add options to get silicon version - Fix time handling - Map OCM/TCM via MMU - Add new clock driver
2017-08-03ahci-pci: Update call to ahci_probe_scsi_pci()Bin Meng1-1/+1
ahci_probe_scsi() now takes a 'base' argument, and there is an API that prepares base address for us: ahci_probe_scsi_pci(). Reported-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-02Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini8-7/+1046
2017-08-03net: ravb: Add clock handling supportMarek Vasut1-2/+19
Add support for enabling and disabling the clock using the clock framework based on the content of OF instead of doing it manually in the board file. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-03net: ravb: Detect PHY correctlyMarek Vasut1-3/+4
The order of parameters passed to the phy_connect() was wrong. Moreover, only PHY address 0 was used. Replace this with code capable of detecting the PHY address. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v1.1 at 2024-07-10 02:31:52 +0000