aboutsummaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)AuthorFilesLines
2020-12-13dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass7-14/+14
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename dev_get_platdata() to dev_get_plat()Simon Glass2-6/+6
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass2-26/+26
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass18-19/+19
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-01watchdog: Hide WATCHDOG_RESET_DISABLEMichael Walle1-6/+7
This option is only supported by the IMX watchdog and seems to be similar to CONFIG_WATCHDOG. Move it below the IMX watchdog and make it dependent on IMX_WATCHDOG. Signed-off-by: Michael Walle <michael@walle.cc>
2020-10-16watchdog: octeontx_wdt: Add support for start and stopSuneel Garapati1-5/+83
This patch enhances the Octeon TX/TX2 watchdog driver to fully enable the WDT. With this changes, the "wdt" command is now also supported on these platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
2020-10-08wdt: designware: fix timeout calculation due to expecting KHzJack Mitchell1-1/+1
The timeout calculation is based on the clk being in KHz but the clk api returns the clk value in Hz. Convert this to KHz to calculate the correct timeout value. Signed-off-by: Jack Mitchell <ml@embed.me.uk>
2020-08-25watchdog: Add reset support for OcteonTX / TX2Suneel Garapati3-0/+77
Adds support for Core 0 watchdog poke on OcteonTX and OcteonTX2 platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()Masahiro Yamada1-1/+1
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To help this tedious work, this commit converts devfdt_get_addr_ptr() to dev_read_addr_ptr() by coccinelle. I also removed redundant casts because dev_read_addr_ptr() returns an opaque pointer. To generate this commit, I ran the following semantic patch excluding include/dm/. <smpl> @@ type T; expression dev; @@ -(T *)devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) @@ expression dev; @@ -devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22dm: core: Fix devfdt_get_addr_ptr return valueOvidiu Panait1-2/+2
According to the description of devfdt_get_addr_ptr, this function should return NULL on failure, but currently it returns (void *)FDT_ADDR_T_NONE. Fix this by making devfdt_get_addr_ptr return NULL on failure, as described in the function comments. Also, update the drivers currently checking (void *)FDT_ADDR_T_NONE to check for NULL. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-11watchdog: Add support for K3 RTI watchdogJan Kiszka3-0/+131
This is based on the Linux kernel driver for the RTI watchdog. To actually reset the system on an AM65x, it requires firmware running on the R5 that accepts the NMI and issues the actual system reset via TISCI. Kind of an iTCO, except that this watchdog hardware has support for no-way-out, and only for that. On the J721E, reset works without extra firmware help when routing the RTI interrupt via the ESM. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini3-0/+141
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27Watchdog: introduce ARM SBSA watchdog driverZhao Qiang3-0/+141
According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset. More details about the hardware specification of this device: ARM DEN0029B - Server Base System Architecture (SBSA) This driver can operate ARM SBSA Generic Watchdog as a single stage In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-25treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada1-1/+1
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()Masahiro Yamada1-1/+1
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini2-2/+2
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-20treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada1-1/+1
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()Masahiro Yamada1-1/+1
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-16watchdog: imx: Support set timeout by wdt commandMo, Yuezhang1-5/+13
After "4b969deac0 watchdog: imx: Add DM support", the imx watchdog can be started by wdt command. But the imx watchdog driver only support start with the default timeout. This commit adds the support for setting the timeout which pass from the wdt command into the imx watchdog. If the timeout out of the valid range(0.5~128s), start the watchdog with a timeout within the valid range and the timeout is the one which closest to the passed timeout. Signed-off-by: Yuezhang.Mo <yuezhang.mo@sony.com> Reviewed-by: Andy.Wu <Andy.Wu@sony.com> Reviewed-by: stefano Babic <sbabic@denx.de>
2020-07-09drivers: rename drivers to match compatible stringWalter Lozano1-2/+2
When using OF_PLATDATA, the bind process between devices and drivers is performed trying to match compatible string with driver names. However driver names are not strictly defined, and also there are different names used when declaring a driver with U_BOOT_DRIVER, the name of the symbol used in the linker list and the used in the struct driver_info. In order to make things a bit more clear, rename the drivers names. This will also help for further OF_PLATDATA improvements, such as checking for valid driver names. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Add a fix for sandbox of-platdata to avoid using an invalid ANSI colour: Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass5-0/+5
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass12-0/+12
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-01watchdog MediaTek add upstream compatibleMatthias Brugger1-0/+1
The upstream compatible is called mt6589-wdt. Add this compatible to the driver. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-04-30watchdog: kconfig: Enable designware for rk3399Jagan Teki1-0/+1
Enable designware watchdog driver for rk3399 if WDT defined. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-24watchdog: mpc8xx_wdt: Allow selection of watchdog mode through environmentCharles Frey1-1/+9
The mpc8xx watchdog can work either in 'reset mode' or 'NMI mode'. The selection can be done at startup only. It is desirable to select the mode without rebuilding U-boot. It is also desirable to disable the watchdog without rebuilding. At watchdog startup, check environment variable 'watchdog_mode'. If it is 'off', the watchdog is not started. If it is 'nmi', the watchdog is started in NMI mode. Otherwise, it is started in reset mode which is the default mode. Signed-off-by: Charles Frey <charles.frey@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2020-04-15watchdog: sp805_wdt: get platform clock from dt fileRayagonda Kokatanur1-2/+13
Get the watchdog platform clock from the DTS file using clk subsystem and use the same for calculating ticks in msec. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-15watchdog: honour hw_margin_ms DT propertyRasmus Villemoes1-1/+10
Some watchdog devices, e.g. external gpio-triggered ones, must be reset more often than once per second, which means that the current rate-limiting logic in watchdog_reset() fails to keep the board alive. gpio-wdt.txt in the linux source tree defines a "hw_margin_ms" property used to specifiy the maximum time allowed between resetting the device. Allow any watchdog device to specify such a property, and then use a reset period of one quarter of that. We keep the current default of resetting once every 1000ms. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-15watchdog: move initr_watchdog() to wdt-uclass.cRasmus Villemoes1-0/+33
This function is a bit large for an inline function, and for U-Boot proper, it is called via a function pointer anyway (in board_r.c), so cannot be inlined. It will shortly set a global variable to be used by the watchdog_reset() function in wdt-uclass.c, so this also allows making that variable local to wdt-uclass.c. The WATCHDOG_TIMEOUT_SECS define is not used elsewhere. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-06watchdog: versal: Add support for Xilinx window watchdogAshok Reddy Soma3-0/+189
Add support for Xilinx window watchdog, which can be found on Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-06watchdog: cadence: Remove DECLARE_GLOBAL_DATA_PTR from driverMichal Simek1-2/+0
gd is not used in the driver that's why declaration is not needed at all. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-03-16watchdog: Handle timer wrap aroundChris Packham1-1/+2
On some platforms/architectures the value from get_timer() can wrap. This is particularly problematic when long-running code needs to measure a time difference as is the case with watchdog_reset() which tries to avoid tickling the watchdog too frequently. Use time_after() from time.h instead of a plain > comparison to avoid any issues with the time wrapping on a system that has been sitting in u-boot for a long time. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-03-13watchdog: Align Kconfig propertiesMichal Simek1-28/+28
Just cleanup help indentation to be the same for all options. It means <tab><space><space> indentation. OMAP3 should be indented by tabs which is also fixed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-02-28watchdog: Don't select CONFIG_WATCHDOG and CONFIG_HW_WATCHDOG at the same timeChristophe Leroy1-0/+1
Commit 06985289d452 ("watchdog: Implement generic watchdog_reset() version") introduced an automatic selection of CONFIG_WATCHDOG by CONFIG_WDT. But for boards selecting CONFIG_HW_WATCHDOG, like boards have a powerpc 8xx, CONFIG_WATCHDOG shall not be selected as they are mutually exclusive. Make CONFIG_WATCHDOG dependent on !CONFIG_HW_WATCHDOG Fixes: 06985289d452 ("watchdog: Implement generic watchdog_reset() version") Cc: Stefan Roese <sr@denx.de> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-28watchdog: mpc8xx: Revert the 8xx watchdog back to CONFIG_HW_WATCHDOGChristophe Leroy2-2/+2
Commit f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") switched the watchdog to CONFIG_WATCHDOG. But this is not compatible with the 8xx because it starts the watchdog HW timer at reset and must be serviced from the very beginning including while U-boot is executed in the firmware before relocation in RAM. Select CONFIG_HW_WATCHDOG and make hw_watchdog_reset() visible. Meanwhile, finalise the cleanup of arch/powerpc/cpu/mpc8xx/Kconfig by removing the lines put in comment in that commit, and also remove again the selection of CONFIG_MPC8xx_WATCHDOG which was removed by that commit and brought back by mistake by commit b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Note that there was an 'imply WATCHDOG' in the original commit but it disappeared in the Kconfig alphabetical sorting, so no need to remove it here. Fixes: f3729ba6e7b2 ("watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup") Fixes: b3134ffbd944 ("watchdog: Kconfig: Sort entry alphabetically") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Stefan Roese <sr@denx.de> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini5-0/+6
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
2020-02-07watchdog: cortina_wdt: add support for HW WDT on CAxxxx SoCsJason Li3-0/+148
Add support for hardware watchdog timer on all Cortina Access CAxxxx family of SoCs. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Jason Li <jason.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
2020-02-06Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2-24/+133
- Gen 5 and Watchdog fixes
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass2-0/+2
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass4-0/+4
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05watchdog: designware: Optionally fetch clock and reset from DTMarek Vasut1-7/+33
Add optional support for fetching watchdog clock rate from DT and ungating reset via reset framework. This is optional as not all platforms using DW WDT support the clock and reset frameworks yet. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Philipp Tomisch <philipp.tomisch@theobroma-systems.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc
2020-02-05watchdog: designware: Convert to DM and DT probingMarek Vasut2-24/+100
Convert the designware watchdog timer driver to DM and add DT probing support. Perform minor coding style clean up, like drop superfluous braces. These ought to be no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Philipp Tomisch <philipp.tomisch@theobroma-systems.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # roc-rk3399-pc
2020-02-04watchdog: omap_wdt: Fix WDT coding styleMarek Vasut1-22/+22
Fix obvious coding style problems, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04watchdog: omap_wdt: Fix WDT reloadingMarek Vasut1-0/+10
The watchdog timer value was never updated in the hardware by this driver, so the watchdog triggered on some random stale value that was left in the hardware. The TI SPRUH37C says, quote: 20.4.3.9 Modifying Timer Count/Load Values and Prescaler Setting ... After a write access, the load register value and prescaler ratio registers are updated immediately, but new values are considered only after the next consecutive counter overflow or after a new trigger command (the WDT_WTGR register). This means at least one trigger must happen. The driver probably depended on someone calling it's .reset() callback, however that is not guaranteed e.g. if the WDT operates without servicing. Add this missing trigger. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-04watchdog: omap_wdt: Fix WDT timeout configurationMarek Vasut1-1/+1
The timeout parameter of omap3_wdt_start() is in miliseconds, while GET_WLDR_VAL() expects parameter in seconds. Fix this so the WDT driver is actually usable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Suniel Mahesh <sunil.m@techveda.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-02-03watchdog: designware: Migrate CONFIG_DESIGNWARE_WATCHDOG to KconfigMarek Vasut1-0/+7
Migrate CONFIG_DESIGNWARE_WATCHDOG to Kconfig and update the headers accordingly, no functional change. The S10 enables the WDT only in SPL, but does not enable it in U-Boot itself, hence disable it in the config again. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Philipp Tomisch <philipp.tomisch@theobroma-systems.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2020-01-23watchdog: bcm6345: allow to use this driver on arm bcm68360Philippe Reynes1-1/+2
This IP is also used on some arm SoC, so we allow to use it on arm bcm68360 too. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-01-17common: Move hang() to the same header as panic()Simon Glass3-0/+3
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move reset_cpu() to the CPU headerSimon Glass2-0/+2
Move this function out of common.h and into a relevant header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-11-03watchdog: imx: Use immediate reset bits for expire_nowRobert Hancock1-7/+15
The expire_now function was previously setting the watchdog timeout to minimum and waiting for the watchdog to expire. However, this watchdog also has bits to trigger immediate reset. Use those instead, like the Linux imx2_wdt driver does. Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
2019-11-03watchdog: imx: Add DT ext-reset handlingRobert Hancock1-6/+13
The Linux imx2_wdt driver uses a fsl,ext-reset-output boolean in the device tree to specify whether the board design should use the external reset instead of the internal reset. Use this boolean to determine which mode to use rather than using external reset unconditionally. For the legacy non-DM mode, the external reset is always used in order to maintain the previous behavior. Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
generated by cgit v1.1 at 2024-07-14 05:26:08 +0000