aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-mxc.c
AgeCommit message (Collapse)AuthorFilesLines
2022-06-28usb: ehci-mxc: RemoveTom Rini1-148/+0
There are no platforms enabling this driver, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01arm: Remove zmx25 board and ARCH_MX25Tom Rini1-50/+1
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last ARCH_MX25 platform, remove those references as well. Cc: Matthias Weisser <weisserm@arcor.de> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-01arm: Remove flea3 boardTom Rini1-53/+0
This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last mx35 platform, remove that support as well. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-01usb: Rename ehci-fsl.h to ehci-ci.hMateusz Kulikowski1-1/+1
Most of ehci-fsl header describe USB controller designed by Chipidea and used by various SoC vendors. This patch renames it to a generic header: ehci-ci.h Contents of file are not changed (so it contains several references to freescale SoCs). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
2013-10-20usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.Troy Kisky1-1/+2
This paramter will later be used to initialize OTG ports in host or device mode. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk1-13/+1
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2012-11-19ehci-mxc: Fix host power mask bit for i.MX25Benoît Thébaudeau1-1/+1
The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance selection bit. This issue has been reported by Eric Bénard <eric@eukrea.com> and fixed by Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s had been copied. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de>
2012-11-19ehci-mxc: Fix host power mask bit for i.MX35Benoît Thébaudeau1-1/+1
The correct bit for H1_PM is 16, not 8, which is the DP pull-up impedance selection bit. This issue has been reported by Michael Burkey <mdburkey@gmail.com> and fixed by Christoph Fritz <chf.fritz@googlemail.com> on Linux, from which these #define-s had been copied. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2012-11-16ehci-mxc: Add support for i.MX35Benoît Thébaudeau1-0/+69
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-11-16ehci-mxc: Define host offsetsBenoît Thébaudeau1-1/+1
Some MXC SoCs like the i.MX35 have hosts located at unusual offsets, so prepare to the introduction of i.MX35 support by defining the ehci-mxc hosts offsets at SoC level. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-11-16ehci-mxc: Make i.MX25 EHCI configurableBenoît Thébaudeau1-8/+64
Use EHCI MXC configuration options for i.MX25. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Matthias Weisser <weisserm@arcor.de>
2012-11-16ehci-mxc: Clean upBenoît Thébaudeau1-46/+40
Clean up ehci-mxc: - Remove useless #if's. - Fix identation. - Issue a #error if used with an unsupported platform. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2012-10-15usb: ehci: rework to take advantage of new lowlevel interfaceLucas Stach1-6/+5
Kill off ehci-core.h It was used to specify some static controller data. To support more than one controller being active at any time we have to carry the controller data ourselfes. Change the ehci interface accordingly. NOTE: OMAP implemented the ehci stuff a bit backwards and should be fixed to do the same thing as other platforms. But the change for now is at least compile clean. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de>
2012-05-15imx: usb: There is no such registerTimo Ketola1-2/+0
The reference manual of i.MX25 (nor i.MX31) does not define such register. This seems to access read only UH2_CAPLENGTH register (if CONFIG_MXC_USB_PORT is zero). Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15i.MX25: usb: Set PORTSCx registerTimo Ketola1-2/+0
The USB controller in i.MX25 has a PORTSCx registers which should be set. In this regard it is similar to the controller in i.MX31. As this file is compiled only with i.MX25 and -31, #ifdef check can be removed. Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
2011-12-09drivers/usb/host/ehci-mxc.c: Fix GCC 4.6 warningAnatolij Gustschin1-2/+1
Fix: ehci-mxc.c: In function 'ehci_hcd_init': ehci-mxc.c:113:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-04ehci-mxc: remove incorrect commentWolfgang Grandegger1-1/+0
The USB port to be used is determined by CONFIG_MXC_USB_PORT. So, it appears that the comment is not correct. Remove it. Signed-off-by: Wolfgang Grandegger <wg@denx.de>
2011-07-14imx: Add support for USB EHCI on imx25Matthias Weisser1-8/+25
Adding support for USB host on imx25 using the internal PHY. Changing the name of base address define for imx31 to get some unification. Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2011-04-27IMX: MX31: Cleanup include files and drop nasty #ifdef in driversStefano Babic1-1/+1
As exception among the i.MX processors, the i.MX31 has headers without general names (mx31-regs.h, mx31.h instead of imx-regs.h and clock.h). This requires several nasty #ifdef in the drivers to include the correct header. The patch cleans up the driver and renames the header files as for the other i.MX processors. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-18MX31: add delay between USB port setup and resetStefano Babic1-0/+2
Sometimes a usb tree is not popolated after a system reset. It seems a delay is required after setting the USB ports for the MX.31 before resetting the ehci controller. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-10-13MX31: Add support for MXC EHCI controllerStefano Babic1-0/+130
The patch adds the EHCI controller for the i.MX31 Soc. Signed-off-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-07-21 00:39:53 +0000