aboutsummaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2017-05-22Drop three-wire serial (TWS) supportSimon Glass2-102/+0
This subsystem has not been converted to driver model, there is only one driver and only one board that uses it. Drop it and its CONFIG option. Also drop the rtc4543 RTC driver since it uses TWS. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-08rtc: Add DM support to ds1307Chris Packham2-20/+196
Add an implementation of the ds1307 driver that uses the driver model i2c APIs. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-18drivers: remove Blackfin specific driversMasahiro Yamada2-122/+0
These drivers have no user since commit ea3310e8aafa ("Blackfin: Remove"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-04-10dm: rtc: Add 16-bit read/write supportBin Meng1-0/+30
At present there are only 8-bit and 32-bit read/write routines in the rtc uclass driver. This adds the 16-bit support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-14rtc: pcf2127: Update Kconfig and code styleMeng Yi2-21/+27
Unfortunately version 2 of this patch was applied which was missing some changes. Fix this. Signed-off-by: Meng Yi <meng.yi@nxp.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02rtc: Add RTC chip pcf2127 supportMeng Yi3-0/+114
This driver compatible with pcf2127 and pcf2129 Signed-off-by: Meng Yi <meng.yi@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11rtc: Use CONFIG_X86 instead of __I386__Simon Glass1-1/+1
For 64-bit x86, __I386__ should perhaps not be defined. It is not clear from the definition, but let's use CONFIG_X86 to be sure. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-09-23treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada1-1/+1
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23drivers: squash lines for immediate returnMasahiro Yamada1-3/+1
Remove unneeded variables and assignments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-14rtc: Tidy up the code styleSimon Glass1-39/+32
This code generates lots of checkpatch errors. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-04rtc: Add MCP79411 support to DS1307 rtc driverAndy Fleming2-1/+35
The code is from Adrian Cox, and is patterned after similar support in Linux (drivers/rtc/rtc-ds1307.c:1121-1135). This chip is used on the Cyrus board from Varisys. Signed-off-by: Andy Fleming <afleming@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-21dm: rtc: Correct rtc_read32() return valueSimon Glass1-1/+1
The current check is incorrect and will fail when any non-zero byte is read. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21rtc: mc146818: Use probe() to set up the deviceSimon Glass1-2/+2
At present this driver uses bind() to set up the device. The bind() method should not touch the hardware, so move the init code to probe(). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-21rtc: mc146818: Add a comment to the #endifSimon Glass1-1/+1
Add a comment to make it clear to which block the #endif relates. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-09-01rtc:ds3232/ds3231: Add support to generate 32KHz outputPriyanka Jain1-0/+10
RTC devices can generate 32KHz output if for -DS3232 device, EN32KHz bit and BB32KHz bit are set -DS3231 device, EN32KHz bit is set, BB32KHz bit is don't care Patch adds rtc_enable_32khz_output() which when called will enable 32KHz output on 32KHz pin Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-12drivers: hierarchize drivers Kconfig menuMasahiro Yamada1-0/+8
The menuconfig for drivers are getting more and more cluttered and unreadable because too many entries are displayed in a single flat menu. Use hierarchic menu for each category. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Update to apply again in a few places, drop USB hunk] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-14dm: rtc: Support mc146818 driver in driver modelBin Meng1-108/+204
Add driver model support to the mc146818 rtc driver. Also clean up the driver a little bit for coding convention issues. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05dm: rtc: sandbox: Enable real-time clock supportSimon Glass1-2/+0
Enable real-time-clock support in sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05dm: rtc: sandbox: Add a driver for the sandbox I2C RTCSimon Glass2-0/+109
Add a driver which communicates with the sandbox I2C emulation RTC device and permits it to be used in U-Boot. This driver is very simple - it just reads and writes selected I2C registers in the device. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05dm: rtc: sandbox: Add an emulated I2C RTC deviceSimon Glass2-0/+237
Add a sandbox I2C emulation device which emulates a real-time clock. The clock works off an offset from the current system time, and supports setting and getting the clock, as well as access to byte-width regisers in the RTC. It does not support changing the system time. This device can be used for testing the 'date' command on sandbox, as well as the RTC uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05dm: rtc: Add a uclass for real-time clocksSimon Glass3-0/+106
Add a uclass for real-time clocks which support getting the current time, setting it and resetting the chip to a known-working state. Some RTCs have additional registers which can be used to store settings, so also provide an interface to these. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05dm: rtc: Rename mktime() and reduce the number of parametersSimon Glass12-34/+23
Most callers unpack the structure and pass each member. It seems better to pass the whole structure instead, as with the C library. Also add an rtc_ prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-05dm: rtc: Rename to_tm() to rtc_to_tm() and add error codeSimon Glass12-13/+17
Rename this function so that it is clear that it is provided by the RTC. Also return an error when it cannot function as expected. This is unlikely to occur since it works for dates since 1752 and many RTCs do not support such old dates. Still it is better to be accurate. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-05dm: rtc: Rename gregorian day functionSimon Glass2-3/+8
Change this function name to something more descriptive. Also return a failure code if it cannot calculate a correct value. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-03-24remove unnecessary version.h includesRob Herring1-1/+0
Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
2015-01-24x86: rtc: mc146818: Add helpers to read/write CMOS RAMSimon Glass1-48/+73
On x86 we use CMOS RAM to read and write some settings. Add basic support for this, including access to registers 128-255. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-05mpc8260: remove atc board supportMasahiro Yamada2-218/+0
These boards are still non-generic boards. drivers/rtc/ds12887.c should also be removed because it can not be built without CONFIG_ATC. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
2014-12-08Replace <compiler.h> with <linux/compiler.h>Masahiro Yamada1-1/+1
Including <linux/compiler.h> is enough for general use. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-25rtc: mc146818: Set up RTC at start of daySimon Glass2-5/+40
Provide a function to set up the RTC ready for use. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-10-23arm: marvell: Move arch/kirkwood.h to arch/soc.hStefan Roese1-1/+1
This move makes is possible to use this header not only from kirkwood platforms but from all Marvell mvebu platforms. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Luka Perkov <luka@openwrt.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-09-24kconfig: add blank Kconfig filesMasahiro Yamada1-0/+0
This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2014-08-14RTC: add support for DS1339 (using DS1307 driver)Markus Niebel2-1/+2
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
2014-02-19kbuild: use Linux Kernel build scriptsMasahiro Yamada1-1/+1
Now we are ready to switch over to real Kbuild. This commit disables temporary scripts: scripts/{Makefile.build.tmp, Makefile.host.tmp} and enables real Kbuild scripts: scripts/{Makefile.build,Makefile.host,Makefile.lib}. This switch is triggered by the line in scripts/Kbuild.include -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj We need to adjust some build scripts for U-Boot. But smaller amount of modification is preferable. Additionally, we need to fix compiler flags which are locally added or removed. In Kbuild, it is not allowed to change CFLAGS locally. Instead, ccflags-y, asflags-y, cppflags-y, CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o are prepared for that purpose. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
2013-11-11Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini1-1/+1
2013-11-09Merge branch 'iu-boot/master' into 'u-boot-arm/master'Albert ARIBAUD1-4/+4
Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile board/compulab/cm_t35/Makefile board/corscience/tricorder/Makefile board/ppcag/bg0900/Makefile drivers/bootcount/Makefile include/configs/omap4_common.h include/configs/pdnb3.h Makefile conflicts are due to additions/removals of object files on the ARM branch vs KBuild introduction on the main branch. Resolution consists in adjusting the list of object files in the main branch version. This also applies to two files which are not listed as conflicting but had to be modified: board/compulab/common/Makefile board/udoo/Makefile include/configs/omap4_common.h conflicts are due to the OMAP4 conversion to ti_armv7_common.h on the ARM side, and CONFIG_SYS_HZ removal on the main side. Resolution is to convert as this icludes removal of CONFIG_SYS_HZ. include/configs/pdnb3.h is due to a removal on ARM side. Trivial resolution is to remove the file. Note: 'git show' will also list two files just because they are new: include/configs/am335x_igep0033.h include/configs/omap3_igep00x0.h
2013-11-09malta: enable RTC supportPaul Burton1-1/+1
This is actually required in order for a Linux kernel to boot successfully on a physical Malta board. Without enabling the RTC, a Malta Linux kernel will get stuck in its estimate_frequencies function on boot. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-11-01am33xx, davinci: Create and use <asm/davinci_rtc.h>Tom Rini1-1/+1
Create a common header file for the RTC IP block that is shared between davinci and am33xx. Signed-off-by: Tom Rini <trini@ti.com>
2013-11-01drivers/rtc/davinci.c: Reference DAVINCI_RTC_BASE more directlyTom Rini1-3/+3
We shouldn't rely on a define to hide this cast for us. Signed-off-by: Tom Rini <trini@ti.com>
2013-10-31drivers: convert makefiles to Kbuild styleMasahiro Yamada1-65/+43
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-14Coding Style cleanup: replace leading SPACEs by TABsWolfgang Denk2-2/+2
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: Tom Rini <trini@ti.com>
2013-10-14Coding Style cleanup: remove trailing white spaceWolfgang Denk1-1/+1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-09-19drivers: s3c44b0_rtc: delete an unused driverMasahiro Yamada2-85/+0
Since commit 5dc5f36 removed B2 board support, there are no boards enabling s3c44b0_rtc. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Andrea Scian <andrea.scian@dave-tech.it>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk41-666/+41
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-04-01Consolidate bool typeYork Sun1-19/+10
'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
2013-03-11ppc: Remove PCIPPC2 and PCIPPC6 boardsStefan Roese1-14/+0
These boards seem to be unmaintained for quite some time. So lets remove support for them completely. This also cleans up some common drivers/files. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Guillaume Alexandre <guillaume.alexandre@gespac.ch> Acked-by: Wolfgang Denk <wd@denx.de>
2012-11-14pmic: Extend PMIC framework to support multiple instances of PMIC devicesŁukasz Majewski1-3/+7
The PMIC framework has been extended to support multiple instances of the variety of devices responsible for power management. This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB Interface Circuit). Power related includes have been moved to ./include/power directory. This is a first of a series of patches - in the future "pmic" will be replaced with "power". Two important issues: 1. The PMIC needs to be initialized just after malloc is configured 2. It uses list to hold information about available PMIC devices Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
2012-09-02rtc: pcf8563: Make century compatible with LinuxBenoît Thébaudeau1-2/+2
This driver uses the century bit of this RTC in the opposite way Linux does. From Linux's rtc-pcf8563.c: /* * The meaning of MO_C bit varies by the chip type. * From PCF8563 datasheet: this bit is toggled when the years * register overflows from 99 to 00 * 0 indicates the century is 20xx * 1 indicates the century is 19xx * From RTC8564 datasheet: this bit indicates change of * century. When the year digit data overflows from 99 to 00, * this bit is set. By presetting it to 0 while still in the * 20th century, it will be set in year 2000, ... * There seems no reliable way to know how the system use this * bit. So let's do it heuristically, assuming we are live in * 1970...2069. */ As U-Boot's PCF8563 driver does not say it is supposed to support the RTC8564, make this driver compatible with Linux's by giving the opposite meaning to the century bit. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
2012-09-01rtc: add support of mx27 rtctrem2-0/+84
This driver has been tested on board armadeus apf27. Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Acked-by: Stefano Babic <sbabic@denx.de>
2012-09-01mxs: Convert sys_proto.h prefixes to 'mxs'Otavio Salvador1-2/+2
The sys_proto.h functions (except the boot modes) are compatible with i.MX233 and i.MX28 so we use 'mxs' prefix for its methods. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-09-01rtc: imxdi: Initial supportBenoît Thébaudeau2-0/+245
Add support for Freescale's i.MX DryIce RTC, present on i.MX25. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-08-12 05:49:47 +0000