aboutsummaryrefslogtreecommitdiff
path: root/drivers/ram
AgeCommit message (Collapse)AuthorFilesLines
2019-05-20mpc83xx: Introduce ARCH_MPC837XMario Six1-4/+4
Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC836*Mario Six1-4/+4
Replace CONFIG_MPC836* with proper CONFIG_ARCH_MPC836* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC831*Mario Six1-2/+2
Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC830*Mario Six1-2/+2
Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-08rockchip: ram: rk3399: update for TPLKever Yang1-5/+10
Init the ddr sdram in TPL instead of SPL, update the code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2019-05-08rockchip: dmc: rk3368: update rank number for evb-px5Kever Yang1-0/+4
evb-px5 has only 1 CS, update for it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Andy Yan <andy.yan@rock-chips.com>
2019-05-08Revert "rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL"Kever Yang1-6/+6
This reverts commit f338cca1d2bce906b049722d2fdbf527a4963b61. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-01rockchip: use 'arch-rockchip' as header file pathKever Yang7-40/+40
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-12stm32mp1: add trusted boot with TF-APatrick Delaunay1-1/+2
Add support of trusted boot, using TF-A as first stage bootloader, The boot sequence is BootRom >=> TF-A.stm32 (clock & DDR) >=> U-Boot.stm32 The TF-A monitor provides secure monitor with support of SMC - proprietary to manage secure devices (BSEC for example) - PSCI for power The same device tree is used for STMicroelectronics boards with basic boot and with trusted boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-01-02rockchip: ram: update license for sdram driverKever Yang6-6/+6
Rockchip may use this sdram copy of source code for both open source and internal project, update the license to use both GPL2.0+ and BSD-3 Clause. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-12-10rockchip: rk322x: ram: enable DRAM init in SPL instead of TPLKever Yang1-6/+6
Patch for rk322x TPL is not merged, and only SPL is available now, enable the sdram driver in SPL first. We should update back to TPL after TPL is enabled for rk322x. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-11-28ram: MediaTek: add DDR3 driver for MT7629 SoCRyder Lee3-0/+774
This patch adds a DDR3 driver for MT7629 SoC. Signed-off-by: Wu Zou <wu.zou@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-16ram: Introduce K3 AM654 DDR Sub System driverLokesh Vutla4-0/+2027
K3 based AM654 devices has DDR memory subsystem that comprises Synopys DDR controller, Synopsis DDR phy and wrapper logic to intergrate these blocks into the device. This DDR subsystem provides an interface to external SDRAM devices. Adding support for the initialization of the external SDRAM devices by configuring the DDRSS registers and using the buitin PHY routines. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Signed-off-by: James Doublesin <doublesin@ti.com>
2018-11-14ram: bmips: Remove DM_FLAG_PRE_RELOC flagBin Meng1-1/+0
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-28drivers: cosmetic: Convert SPDX license tags to Linux Kernel stylePatrick Delaunay2-4/+2
Complete in the drivers directory the work started with commit 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style"). Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-09-18ram: Add driver for MPC83xxMario Six3-0/+1106
Add a RAM driver for the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-08-08bmips: ram: add an option to force the size of the ramPhilippe Reynes1-1/+7
This adds an option to force the size of the ram, and avoid the detection of ram size. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-06-01ram: bmips: convert to use live dtÁlvaro Fernández Rojas1-5/+2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-05-26ram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at bootingRadoslaw Pietrzyk1-13/+24
- adds reading FMC swap setting from DTB to SDRAM driver - sets FMC swap for stm32f429-disco board - changes ram start address to 0x90000000 Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietrzyk@gmail.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-07regmap: change regmap_init_mem() to take ofnode instead udeviceMasahiro Yamada6-6/+6
Currently, regmap_init_mem() takes a udevice. This requires the node has already been associated with a device. It prevents syscon/regmap from behaving like those in Linux. Change the first argumenet to take a device node. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our multiple license tags to Linux Kernel styleTom Rini5-10/+5
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini11-22/+11
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini8-13/+0
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28driver: ram: rockchip: rk3399: missing counter incrementHeinrich Schuchardt1-0/+1
If we want to check the duration we need to increment the counter. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-19ram: stm32mp1: add driverPatrick Delaunay8-0/+1291
Add driver and binding for stm32mp1 ddr controller and phy Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-01-26dm: ram: bmips: add BCM6318 supportÁlvaro Fernández Rojas1-0/+19
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-01-10ram: stm32: add memory mapping selection supportPatrice Chotard1-0/+25
This allows to controls the memory internal mapping at address 0x0000 0000. We can either map at 0x0000 0000 : _ main flash memory _ system flash memory _ FMC bank1 (NOR/PSRAM 1 and 2) _ embedded SRAM _ FMC/SDRAM bank1 This is needed for future STM32F469-disco board Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-30rockchip: rk3128: add sdram driverKever Yang2-0/+60
RK3128 support up to 2GB DDR3 sdram, one channel, 32bit data width. This patch is only used for U-Boot, but not for SPL which will comes later, maybe after we merge all the common code into a common file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-06stm32: fix STMicroelectronics copyrightPatrice Chotard1-2/+2
Uniformize STMicroelectronics copyrights headers for STM32 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-04treewide: replace with error() with pr_err()Masahiro Yamada3-12/+12
U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-01rockchip: rk3188: ram: add support for 16bit row addressKever Yang1-2/+9
RK3188 using the same ddr_conf for both 15 bit and 16 bit row address. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> [Fixed compile-error by declaring 'row':] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk322x: add sdram driverKever Yang2-0/+856
Add driver for rk322x to support sdram initialize in SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3328: move sdram driver to driver/ramKever Yang2-0/+61
Since we have CONFIG_RAM framwork and its driver folder, move the driver into it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3288: move sdram driver to driver/ramKever Yang2-0/+1126
Since we have CONFIG_RAM framwork and its driver folder, move the driver into it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3188: move sdram driver to driver/ramKever Yang2-0/+954
Since we have CONFIG_RAM framwork and its driver folder, move the driver into it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-01rockchip: rk3399: move sdram driver to driver/ramKever Yang2-0/+1239
Since we have CONFIG_RAM framwork and its driver folder, move the driver into it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-18rockchip: rk3368: adjust DMC driver for 32/64bit-aware OF_PLATDATAPhilipp Tomsich1-9/+2
With the new 32/64bit-aware dtoc, the type of reg is fdt64_t and the OF_PLATDATA structure layout changes. This adjusts the DMC driver for the RK3368 to track these changes. For the time being (i.e. until regmap_init_mem_platdata works for the 64bit case), we won't use regmap_init_mem_platdata here and simply access of_plat.reg[] directly. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-26ram: kconfig: s/SPL/TPL/ in TPL_RAM help textJagan Teki1-1/+1
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-13rockchip: rk3368: add DRAM controller driver with DRAM initialisationPhilipp Tomsich3-0/+1016
This adds a DRAM controller driver for the RK3368 and places it in drivers/ram/rockchip (where the other DM-enabled DRAM controller drivers for rockchip devices should also be moved eventually). At this stage, only the following feature-set is supported: - DDR3 - 32-bit configuration (i.e. fully populated) - dual-rank (i.e. no auto-detection of ranks) - DDR3-1600K speed-bin This driver expects to run from a TPL stage that will later return to the RK3368 BROM. It communicates with later stages through the os_reg2 in the pmugrf (i.e. using the same mechanism as Rockchip's DDR init code). Unlike other DMC drivers for RK32xx and RK33xx parts, the required timings are calculated within the driver based on a target frequency and a DDR3 speed-bin (only the DDR3-1600K speed-bin is support at this time). The RK3368 also has the DDRC0_CON0 (DDR ch. 0, control-register 0) register for controlling the operation of its (single-channel) DRAM controller in the GRF block. This provides for selecting DDR3, mobile DDR modes, and control low-power operation. As part of this change, DDRC0_CON0 is also added to the GRF structure definition (at offset 0x600). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-13spl: dm: Kconfig: introduce TPL_RAM (in analogy to SPL_RAM)Philipp Tomsich1-0/+9
To allow finer grained selection of features for TPL, we introduce TPL_RAM (in analogy to SPL_RAM). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-13spl: dm: Kconfig: SPL_RAM depends on SPL_DMPhilipp Tomsich1-1/+1
This commit models the dependency from SPL_RAM to SPL_DM in Kconfig. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-26ram: stm32: add stm32h7 supportPatrice Chotard1-1/+24
STM32F7 and H7 shared the same SDRAM control block. On STM32H7 few control bits has been added. The current driver need some minor adaptation as FMC block enable/disable for H7. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-07-26ram: stm32: add second SDRAM bank managementPatrice Chotard1-73/+142
FMC is able to manage 2 SDRAM banks, but the current driver implementation is only able to manage the first SDRAM bank. Even if only bank2 is used, some bank1 registers must be configured. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-26ram: stm32: replace fdtdec_get by ofnode callsPatrice Chotard1-36/+47
Replace all fdtdec_get..() calls by ofnode_read...() or dev_read..(). This will allow drivers to support a live device tree. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-26ram: stm32: get base address from DTPatrice Chotard1-28/+64
Retrieve RAM base address from DT instead of using STM32_SDRAM_FMC For STM32F7, FMC block base address is 0xA0000000, but SDRAM registers are located at offset 0x140 inside FMC block. Update the stm32_fmc_regs fields with all FMC registers to map SDRAM registers at the right address. These additionals registers will be used later. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-07-26ram: stm32: migrate fmc defines in driver filePatrice Chotard1-1/+58
Migrate all FMC defines from arch/arm/include/asm/arch-stm32f7/fmc.h to drivers/ram/stm32_sdram.c This will avoid to add an additionnal arch-stm32xx/fmc.h file when a new stm32 family soc will be introduced. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-05drivers: ram: stm32: fix compilation issuePatrice Chotard1-1/+1
If CONFIG_CLK flag is not set, compilation raises the following error message: drivers/ram/stm32_sdram.c: In function 'stm32_fmc_probe': drivers/ram/stm32_sdram.c:154:2: error: 'ret' undeclared (first use in this function) ret = stm32_sdram_init(dev); Signed-off-by: Patrice Chotard <patrice.chotard@st.com> cc: Vikas Manocha <vikas.manocha@st.com>
2017-06-01dm: core: Replace of_offset with accessor (part 2)Simon Glass1-1/+1
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: Rename dev_addr..() functionsSimon Glass1-1/+1
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: Use dm.h header when driver mode is usedSimon Glass1-1/+1
This header includes things that are needed to make driver build. Adjust existing users to include that always, even if other dm/ includes are present Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-09-17 01:38:49 +0000