aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/pcie_imx.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-25pci: Add defines for normal and subtractive PCI bridgesPali Rohár1-2/+2
Add following two new PCI class codes defines into pci_ids.h include file: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE And use these defines in all U-Boot code for describing PCI class codes for normal and subtractive PCI bridges. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-05pci: imx: Drop use of DM_PCISimon Glass1-81/+0
Now that DM_PCI is always enabled we don't need to check it. Drop this old code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-10pci: imx: use reset-gpios if defined by device-treeTim Harvey1-5/+24
If reset-gpio is defined by device-tree use that if CONFIG_PCIE_IMX_PERST_GPIO is not defined. Note that after this the following boards which define CONFIG_PCIE_IMX_PERST_GPIO in their board header file as well as their device-tree should be able to remove CONFIG_PCIE_IMX_PERST_GPIO without consequence: - mx6sabresd - mx6sxsabresd - novena - tbs2910 - vining_2000 Note that the ge_bx50v3 board uses CONFIG_PCIE_IMX_PERST_GPIO and does not have reset-gpios defined it it's pcie node in the dt thus removing CONFIG_PCIE_IMX_PERST_GPIO globally can't be done until that board adds reset-gpios. Cc: Ian Ray <ian.ray@ge.com> (maintainer:GE BX50V3 BOARD) Cc: Sebastian Reichel <sebastian.reichel@collabora.com> (maintainer:GE BX50V3 BOARD) Cc: Fabio Estevam <festevam@gmail.com> (maintainer:MX6SABRESD BOARD) Cc: Marek Vasut <marex@denx.de> (maintainer:NOVENA BOARD) Cc: Soeren Moch <smoch@web.de> (maintainer:TBS2910 BOARD) Cc: Silvio Fricke <open-source@softing.de> (maintainer:VINING_2000 BOARD) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-05-02pci: imx: disable imx6sdl LTSSM upon driver removeTim Harvey1-1/+1
commit 6ecbe1375671 ("drivers: pci: imx: add imx_pcie_remove function") attempted to resolve an issue caused by MX6QDL not having a proper intneral PCIe core reset and thus hanging during kernel init if the bootloader had enabled PCI. The issue exists for IMX6Q, IMX6D, IXM6S, and IMX6DL. Fix the case for IMX6S and IMX6DL getting missed. This fixes IMX6S and IMX6DL with PCI enabled in U-Boot booting for Linux v4.11+. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-12-13dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass1-2/+2
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass1-1/+1
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass1-0/+1
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass1-0/+1
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: pci: Update the PCI read_config() method to const dev *Simon Glass1-1/+1
At present this method uses a non-const udevice pointer, but the call should not modify the device. Use a const pointer. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07pci: imx: Add iMX6SX compatibleMarek Vasut1-0/+1
The driver works fine with iMX6SX, add the missing compatible string. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-12-02common: Move pci_init_board() out of common.hSimon Glass1-0/+1
This function can be dropped when all boards use driver model for PCI. For now, move it into init.h with a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-06-11pci: imx: Add DM and DT supportMarek Vasut1-6/+105
Add DM support and support for probing the iMX PCI driver from DT. The legacy non-DM support is retained, however shall be removed once DM PCI is the only option remaining. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-06-11pci: imx: Pass driver private data aroundMarek Vasut1-19/+25
Pass the driver private data around the driver as much as possible, instead of having it as a static global variable. This is done in preparation for the DM conversion, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-06-11pci: imx: Fix potential 64bit memory access clampingMarek Vasut1-9/+11
The driver limits the config space base to 32bit, however it can be 64bit on 64bit iMX hardware too. Remove that limitation. This patch has no impact on the iMX6, which is the only SoC currently supported by this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-06-11pci: imx: Factor out hard-coded register base addressesMarek Vasut1-31/+44
Pull out hard-coded register base addresses into driver private structure in preparation for DM conversion. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-12drivers: pci: imx: fix enumeration logic errorKoen Vandeputte1-0/+11
By default, the subordinate is set equally to the secondary bus (1) when the RC boots, and does not alter afterwards. This means that theoretically, the highest bus reachable downstream is bus 1. Force the PCIe RC subordinate to 0xff, otherwise no downstream devices will be detected behind bus 1 if the booting OS does not allow enumerating a higher busnr than the subordinate value of the primary bus. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-01-12pci: imx: request gpio before usePeng Fan1-0/+4
Before use GPIO, we need to request gpio first. Free gpio after use. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <ssbabic@denx.de>
2017-10-12drivers: pci: imx: fix imx_pcie_remove functionSven-Ola Tuecke1-4/+4
We have at least a minor count of boards, that failed to re-initialize PCI express in the Linux kernel. Typical failure rate is 20% on affected boards. This is mitigated by commit 6ecbe1375671 ("drivers: pci: imx: add imx_pcie_remove function"). However, at least on some i.MX6 custom boards, when calling assert_core_reset() as part of the first-time PCIe init, read access to PCIE_PL_PFLR simply hangs. Surround this readl() with imx_pcie_fix_dabt_handler() does not help. For this reason, the forced LTSSM detection is only used on the second assert_core_reset() that is called shorly before starting the Linux kernel. Signed-off-by: Sven-Ola Tuecke <sven-ola.tuecke@numberfour.eu> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: David Müller <d.mueller@elsoft.ch>
2017-05-31drivers: pci: imx: add imx_pcie_remove functionTim Harvey1-0/+38
There is no dedicated reset signal wired up for the MX6QDL thus if the bootloader enables the link we need some special handling to get the core back into a state where it is safe to touch it for configuration. While there has been some special handling in the Linux kernel to do this, it was removed in 4.11 thus we need to do it properly in the bootloader and therefore without this if you enable PCI in the bootloader you will hang while booting the 4.11 kernel. This puts the PCIe controller back into a safe state for the kernel driver before launching the kernel. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>
2016-07-12pcie_imx: increment timeout for link upStefano Babic1-1/+1
On some boards, the current 20ms timeout is hit. Increase it to 40mS. Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-01-08pci: imx: Adjust the return value when imx_pcie_addr_valid() failsBin Meng1-1/+1
When trying to access non-existent/unsupported PCI devices in imx_pcie_read_config(), when imx_pcie_addr_valid() fails it returns error code and fills in the result with 0xffffffff manually. But it really should return zero to upper layer codes. Reported-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
2015-10-15pci: pcie_imx: Fix hang on mx6qpFabio Estevam1-0/+8
PCI driver currently hangs on mx6qp. Toggle the reset bit with the appropriate timings to fix the issue. Based on the FSL kernel driver implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2015-09-13pcie_imx: Use 'ms' for millisecondsFabio Estevam1-3/+3
milliseconds should be written as 'ms' instead of 'mS'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Marek Vasut <marex@denx.de>
2015-05-28pci: imx: display message if no pcie linkTim Harvey1-1/+3
If CONFIG_PCI_SCAN_SHOW enabled then lets print a message of no link was detected. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2014-09-09pcie_imx: Add mx6solox supportFabio Estevam1-4/+36
Let PCI on mx6solox also be supported. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
2014-08-20pci: mx6: fix occasional link failuresTim Harvey1-4/+4
According to the IMX6 reference manuals, REF_SSP_EN (Reference clock enable for SS function) must remain deasserted until the reference clock is running at the appropriate frequency. Without this patch we find a high link failure rate (>5%) on certain IMX6 boards at various temperatures. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-04-04Merge branch 'master' of git://git.denx.de/u-boot-arm into masterStefano Babic1-1/+1
Conflicts: arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
2014-03-31pci: mx6: Implement power callbackMarek Vasut1-1/+12
Implement a callback to toggle the slot power supply. The callback can be overriden in case some more complex power supply for the slot was implemented in hardware, yet for the usual case, one can define a GPIO which toggles the power to the slot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Liu Ying <Ying.Liu@freescale.com>
2014-03-04sizes.h - consolidate for all architecturesAlexey Brodkin1-1/+1
Copied from Linux sources "include/linux/sizes.h" commit 413541dd66d51f791a0b169d9b9014e4f56be13c Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Tom Rini <trini@ti.com> Cc: Stefan Roese <sr@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: Tom Rini <trini@ti.com> Acked-by: Stefan Roese <sr@denx.de> [trini: Add bcm Kona platforms to the patch] Signed-off-by: Tom Rini <trini@ti.com>
2014-02-11pci: mx6: Implement reset callbackMarek Vasut1-3/+44
Add a callback so that a board can implement it's own specific routine to toggle the port's #PERST line or #define a GPIO to do so. Signed-off-by: Marek Vasut <marex@denx.de>
2014-01-26ARM: mx6: Add PCI express driverMarek Vasut1-0/+565
Add PCIe driver for the Freescale i.MX6 SoC . This driver operates the PCIe block in RC mode only, the EP mode is NOT supported. The driver is tested with the Intel e1000 NIC driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-08-06 05:27:03 +0000