aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-07-05net: designware: Rename CONFIG_DW_GMAC_DEFAULT_DMA_PBL to GMAC_DEFAULT_DMA_PBLTom Rini1-5/+3
This value is always used at the default, rename it for now. This likely should come from the device tree if non-default, moving forward. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_DW_ALTDESCRIPTOR to KconfigTom Rini1-0/+5
This converts the following to Kconfig: CONFIG_DW_ALTDESCRIPTOR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_E1000_NO_NVM to KconfigTom Rini1-0/+4
This converts the following to Kconfig: CONFIG_E1000_NO_NVM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-27Merge tag 'xilinx-for-v2022.10' of ↵WIP/27Jun2022-nextTom Rini2-27/+54
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.10 cpu: - Add driver for microblaze cpu net: - Add support for DM_ETH_PHY to AXI emac and emaclite xilinx: - Switch platforms to DM_ETH_PHY - DT chagnes in ZynqMP and Zynq - Enable support for SquashFS zynqmp: - Add support for KR260 boards - Move BSS from address 0 - Move platform identification from board code to soc driver - Improve zynqmp_psu_init_minimize versal: - Enable loading app at EL1 serial: - Setup default address and clock rates for DEBUG uarts pinctrl: - Add support for tri state and output enable properties relocate-rela: - Clean relocate-rela implementation for ARM64 - Add support for Microblaze microblaze: - Add support for runtime relocation - Rework cache handling (wiring, Kconfig) based on cpuinfo - Remove interrupt support timer: - Extract axi timer driver from Microblaze to generic location
2022-06-24net: xilinx: axi_emaclite: Use shared MDIO bus support for axi emaclite driverT Karthik Reddy1-15/+28
CONFIG_DM_ETH_PHY enables support to utilize generic ethernet phy framework. Though if ethernet PHY node is in other ethernet node, it will use shared MDIO to access the PHY of other ethernet. Move ethernet print info statement from plat function to probe function, as phyaddr is not enumerated when CONFIG_DM_ETH_PHY is enabled. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/93e11ccca56b6e52b2dcc283d08d5042537f828f.1652181968.git.michal.simek@amd.com
2022-06-24net: xilinx: axi_emac: Use shared MDIO bus support for axi emac driverT Karthik Reddy1-12/+26
CONFIG_DM_ETH_PHY enables support to utilize generic ethernet phy framework. Though if ethernet PHY node is in other ethernet node, it will use shared MDIO to access the PHY of other ethernet. Move ethernet print info statement from plat function to probe function, as phyaddr is not enumerated when CONFIG_DM_ETH_PHY is enabled. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/ecfec78234233fefdc172c141c207b2d78ef70c5.1652181968.git.michal.simek@amd.com
2022-06-20Merge branch 'master' into nextTom Rini1-11/+53
Merge in v2022.07-rc5.
2022-06-17stm32mp1: fix reference for STMicroelectronicsPatrick Delaunay2-2/+2
Replace reference to the correct name STMicroelectronics Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-06-14phy: adin: add support for clock outputJosua Mayer1-0/+42
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as well as providing the reference clock on CLK25_REF. Add support for selecting the clock via device-tree properties. This patch is based on the Linux implementation for this feature, which has been added to netdev/net-next.git [1]. [2] https://patchwork.kernel.org/project/netdevbpf/cover/20220517085143.3749-1-josua@solid-run.com/ Signed-off-by: Josua Mayer <josua@solid-run.com>
2022-06-14phy: adin: fix broken support for adi, phy-mode-overrideNate Drude1-11/+11
Currently, the adin driver fails to compile. The original patch introducing the adin driver used the function phy_get_interface_by_name to support the adi,phy-mode-override property. Unfortunately, a few days before the adin patch was accepted, another patch removed support for phy_get_interface_by_name: https://github.com/u-boot/u-boot/commit/123ca114e07ecf28aa2538748d733e2b22d8b8b5 This patch refactors adin_get_phy_mode_override, implementing the logic in the new function, ofnode_read_phy_mode, from the patch above. Signed-off-by: Nate Drude <nate.d@variscite.com> Tested-by: Josua Mayer <josua@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com>
2022-06-08sandbox: net: Remove fake-host-hwaddrSean Anderson1-8/+2
Instead of reading a pseudo-rom mac address from the device tree, just use whatever we get from write_hwaddr. This has the effect of using the mac address from the environment (or from the device tree, if it is specified). Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ramon Fried <rfried.dev@gmail.com>
2022-06-06arm: pxa: Remove CONFIG_CPU_PXA25XTom Rini1-150/+2
There are no platforms that set this, remove the code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-03net: enetc: unregister mdiobusMichael Walle1-0/+3
If the device fails to probe - for example, when there is no ethaddr set - then the private data is automatically freed but the mdiobus remains registered. Fixes: 1e354cb39314 ("drivers: net: fsl_enetc: register internal MDIO bus") Signed-off-by: Michael Walle <michael@walle.cc>
2022-05-26net: e1000: Depend on CONFIG_PCIWIP/2022-05-26-assorted-fixesSean Anderson1-0/+1
This driver depends on PCI. Update the Kconfig accordingly. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-05-23spi: spi_flash_probe_bus_cs() rely on DT for spi speed and modePatrice Chotard3-21/+8
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode and logically calls spi_get_bus_and_cs(). In case spi mode and speed are not read from DT, make usage of spi_flash_probe() instead. To sum-up: - Previous call tree was: spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs() - Current call tree is: spi_flash_probe() -> _spi_get_bus_and_cs() spi_flash_probe_bus_cs() -> spi_get_bus_and_cs() This patch impacts the following : - cmd/sf.c: if spi mode and/or speed is passed in argument of do_spi_flash_probe(), call spi_flash_probe() otherwise call spi_flash_probe_bus_cs(). - drivers/net/fm/fm.c: as by default spi speed and mode was set to 0 and a comment indicates that speed and mode are read from DT, use spi_flash_probe_bus_cs(). - drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read from DT by all platforms using this driver, so keep legacy and replace spi_flash_probe_bus_cs() by spi_flash_probe(); - drivers/net/sni_netsec.c : spi speed and mode are not read from DT, so replace spi_flash_probe_bus_cs() by spi_flash_probe(). - drivers/usb/gadget/max3420_udc.c: Can't find any platform which make usage of this driver, nevertheless, keep legacy and replace spi_get_bus_and_cs() by _spi_get_bus_and_cs(). - env/sf.c: a comment indicates that speed and mode are read from DT. So use spi_flash_probe_bus_cs(). Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: "Pali Rohár" <pali@kernel.org> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Anji J <anji.jagarlmudi@nxp.com> Cc: Biwen Li <biwen.li@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-04net: mvneta: Drop unneeded macroMarek Behún1-3/+1
Macro MVNETA_GMAC_FORCE_LINK_UP can be dropped from value assignment in fixed link case, since it's value is written into the register later in the function for link-down-to-link-up case. The value is written as MVNETA_GMAC_FORCE_LINK_DOWN | MVNETA_GMAC_FORCE_LINK_PASS, and so the macro definition can also be dropped. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Disable fixed PHY code if PHY_FIXED is not compiled inMarek Behún1-2/+4
Guard the code handling the fixed PHY case by CONFIG_IS_ENABLED(PHY_FIXED). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Drop fixed_link member from private structMarek Behún1-5/+2
Since this member is checked only at two places drop it and inline it's usage. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Write PHY address just before enabling HW pollingMarek Behún1-4/+2
Write PHY address just before enabling HW polling of the PHY. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Convert to use PHY_FIXED for fixed-linkMarek Behún1-61/+37
Stop parsing fixed-link in the MAC driver. Instead support only PHY mode and let the fixed PHY driver handle the fixed-link case. Enable CONFIG_PHY_FIXED for mvneta boards that need it: Turris Omnia and ESPRESSObin. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Rename CONFIG_NR_CPUS to MVNETA_NR_CPUSMarek Behún1-2/+2
The CONFIG_* macros are reserved for Kconfig. This was probably done when this driver was being imported from Linux. Rename the macro. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Don't check for CONFIG_PHYLIBMarek Behún1-4/+0
Drop checking for CONFIG_PHYLIB in mvneta, this is already done in Kconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Drop unnecessary spaceMarek Behún1-1/+1
Drop unnecessary space in mvneta_adjust_link(). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Use bool instead of int for boolean variableMarek Behún1-2/+2
Use the bool type instead of int for status_change variable. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Drop one indentation level in mvneta_adjust_link()Marek Behún1-20/+18
Drop one indentation level in the mvneta_adjust_link() function. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Fix unused variable warning if DM_GPIO is disabledMarek Behún1-3/+2
The `ret` variable in mvneta_probe() is unused if DM_GPIO is disabled. Since the variable is used only once after assigning value, we can inline the usage and drop the variable. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Don't register MDIO busMarek Behún1-141/+2
This MDIO bus is now handled by a proper mvmdio DM driver. Remove it from mvneta. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Remember fixed link instead of PHY address in priv dataMarek Behún1-18/+5
We don't need to remember PHY address anymore, because since using DM MDIO for connecting PHY, the address is parsed by mdio-uclass from the ofnode. But the driver uses a special value of the address to signal fixed link usage. Drop phyaddr add fixed_link in driver private structure. This simplifies code a little. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Use DM MDIO API for connecting PHYMarek Behún2-6/+6
Use the modern DM MDIO API for connecting PHY in the mvneta driver. This requires enabling MVMDIO driver in several config files. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Fix 10Mbps speedMarek Behún1-1/+1
In mvneta_adjust_link() we need to set MII_SPEED bit only if PHY reports the speed at 100Mbps. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: mvneta: Get rid of platdataMarek Behún1-20/+4
Drop .of_to_plat() from the mvneta driver and parse the two properties in .probe(). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-04net: Add ethernet support for MIPS OcteonStefan Roese5-0/+1300
This patchs adds the ethernet & MDIO driver for the MIPS Octeon II / III SoC platform. Please note that these drivers are based on the 2013 U-Boot version from Marvell and make use of the platform supported helper functions for the ethernet functionality, including stuff like SFP handling. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2022-05-03pci: Add mask parameter to dm_pci_map_bar()Andrew Scull13-16/+20
Add a mask parameter to control the lookup of the PCI region from which the mapping can be made. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03pci: Map bars with offset and lengthAndrew Scull13-16/+16
Evolve dm_pci_map_bar() to include an offset and length parameter. These allow a portion of the memory to be mapped and range checks to be applied. Passing both the offset and length as zero results in the previous behaviour and this is used to migrate the previous callers. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-02net: marvell: mvgbe: Set PHY page 0 before phy_connectTony Dinh1-0/+4
For most Kirkwood boards, the PHY page is already set to page 0 (in register 22) before phy_connect is invoked. But some board like the Zyxel NSA310S (which uses the network chip MV88E1318S), the PHY page is not set to page 0. There seems to be some bad data remained in register 22 when the uclass MVGBE about to invoke phy_connect(). This patch enables the uclass MVGBE to always set the PHY page to 0 before phy_connect. For reference, please see this discussion: [RFC PATCH v2] arm: kirkwood: nsa310s: Use Marvell uclass mvgbe and PHY driver for DM Ethernet. https://lists.denx.de/pipermail/u-boot/2022-April/480946.html This patch has been tested with the following Kirkwood boards: NSA310S (88F6702, network chip MV88E1318S) Sheevaplug (88F6281, network chip MV88E1318) Pogo V4 (88F6192, network chip 88E1116R) GF Home(88F6281, network chip 88E1116R) Dreamplug (88F6281, network chip MV88E1318) Dell Kace M300 (88F6282, network chip MV88E1318) - out of tree u-boot Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2022-04-21net: mvneta: add SFP TX disable handlingRobert Marko1-0/+12
Add support for handling SFP TX disable for MVNETA in the same fashion as to what MVPP2 is doing in order to enable using SFP-s. This allows using ethernet on SFP only boards. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-15Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-netTom Rini68-946/+1015
- DM9000 DM support - tftp server bug fix - mdio ofnode support functions - Various phy fixes and improvements. [trini: Fixup merge conflicts in drivers/net/phy/ethernet_id.c drivers/net/phy/phy.c include/phy.h]
2022-04-13net: dm9000: Add Kconfig entryMarek Vasut1-0/+5
Add Kconfig entry for the DM9000 MAC. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Add DM supportMarek Vasut1-0/+118
Add support for U-Boot DM and DT probing. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Receive one packet per recv callMarek Vasut1-52/+50
Instead of reading out the entire FIFO and possibly overwriting U-Boot memory, read out one packet per recv call, pass it to U-Boot network stack, and repeat. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Split non-DM specific bits from common codeMarek Vasut1-18/+40
Split network handling functions into non-DM specific parts and common code in preparation for conversion to DM. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Pass private data around for IOMarek Vasut1-111/+119
Pass private data into IO accessors and use the base addresses of IO and DATA window from the private data instead of using the hard coded macros DM9000_IO/DM9000_DATA. Currently both the DM9000_IO and DM9000_DATA are assigned to the respecive private data fields for the non-DM case backward compatibility. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Drop dm9000.h and staticize SROM accessMarek Vasut1-12/+1
Dispose of dm9000.h because none of the function prototypes declared in it are called anywhere in the codebase. Staticize dm9000_read_srom_word() because it is now called only from within the dm9000 driver. Drop dm9000_write_srom_word() because it is no longer used. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Drop static device private dataMarek Vasut1-11/+17
Allocate driver private data dynamically in its init function and drop the static driver private data variable. Pass the dynamic private data throughout the driver. This is done in preparation for DM conversion. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Rename board_info to dm9000_privMarek Vasut1-5/+5
Rename board_info structure to dm9000_priv to make it clear what this structure really contains, the driver private data. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Reorder and staticizeMarek Vasut1-67/+55
Reorder the driver functions to get rid of forward declarations. Staticize whatever is possible. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Checkpatch cleanupMarek Vasut1-125/+126
Fix checkpatch errors and warnings. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Drop volatilesMarek Vasut1-10/+10
Remove volatile keyword usage from arrays, they are not really volatile in any way, so this keyword is misused here. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Turn DM9000_DMP_PACKET() into a functionMarek Vasut1-21/+21
Rework DM9000_DMP_PACKET() into dm9000_dump_packet() function, this brings better type checking. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
2022-04-13net: dm9000: Drop unused dump_regs()Marek Vasut1-17/+0
Drop unused function dump_regs() because it is unused. No functional change. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com>
generated by cgit v1.1 at 2024-07-12 09:27:16 +0000