aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-25Link failure with CONFIG_SPL and CONFIG_I2C_MUX_PCA954xTrommel, Kees (Contractor)2-2/+2
Fix for the case of a U-Boot configuration with CONFIG_SPL, CONFIG_I2C_MUX, CONFIG_I2C_MUX_PCA954x, no CONFIG_SPL_DM and no CONFIG_SPL_I2C_MUX. Without this fix linking of pca954x fails because dm_write_i2c does not exist because CONFIG_SPL_DM is not defined. Signed-off-by: Kees Trommel <kees.trommel.contractor@draeger.com> Cc: Heiko Schocher <hs@denx.de>
2020-08-25i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 supportStefan Roese1-33/+26
This patch fixes a few issues noticed, when testing this new driver on ARM Octeon TX2 again. Here the details: - Remove "common.h" header inclusion - Use correct THP define on Octeon TX2 - Octeon TX2 uses the same compatible as Octeon TX. We can't distinguish both platforms this way. Remove the unused "cavium,thunder2-99xx-twsi" compatible and add a check to the Octeon TX2 specific "cavium,thunderx-i2c" so that the correct driver data is selected. - Removed "struct pci_device_id" definition and U_BOOT_PCI_DEVICE() as its not needed for the PCI based probing on Octeon TX2 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-08-22treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()Masahiro Yamada4-5/+5
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To help this tedious work, this commit converts devfdt_get_addr_ptr() to dev_read_addr_ptr() by coccinelle. I also removed redundant casts because dev_read_addr_ptr() returns an opaque pointer. To generate this commit, I ran the following semantic patch excluding include/dm/. <smpl> @@ type T; expression dev; @@ -(T *)devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) @@ expression dev; @@ -devfdt_get_addr_ptr(dev) +dev_read_addr_ptr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-22dm: core: Fix devfdt_get_addr_ptr return valueOvidiu Panait1-2/+2
According to the description of devfdt_get_addr_ptr, this function should return NULL on failure, but currently it returns (void *)FDT_ADDR_T_NONE. Fix this by making devfdt_get_addr_ptr return NULL on failure, as described in the function comments. Also, update the drivers currently checking (void *)FDT_ADDR_T_NONE to check for NULL. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-20xilinx: kconfig: Change Kconfig dependencies for Xilinx driversMichal Simek1-1/+1
Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-29i2c: add nexell driverStefan Bosch3-0/+636
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice". - several Bugfixes in nx_i2c.c. - the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working. - "probe_chip" added. - pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini1-68/+70
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27i2c: mxc: move i2c_early_init_f to common functionBiwen Li1-68/+70
Move i2c_early_init_f to common function to initialize baudrate of i2c Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-25treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada6-6/+6
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-25treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()Masahiro Yamada4-4/+4
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini10-10/+10
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-20treewide: convert devfdt_get_addr() to dev_read_addr()Masahiro Yamada6-6/+6
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-20treewide: convert (void *)devfdt_get_addr() to dev_read_addr_ptr()Masahiro Yamada4-4/+4
Use the _ptr suffixed variant instead of casting. Also, convert it to dev_read_addr_ptr(), which is safe to CONFIG_OF_LIVE. One curious part is an error check like follows in drivers/watchdog/omap_wdt.c: priv->regs = (struct wd_timer *)devfdt_get_addr(dev); if (!priv->regs) return -EINVAL; devfdt_get_addr() returns FDT_ADDR_T_NONE (i.e. -1) on error. So, this code does not catch any error in DT parsing. dev_read_addr_ptr() returns NULL on error, so this error check will work. I generated this commit by the following command: $ find . -name .git -prune -o -name '*.[ch]' -type f -print | \ xargs sed -i -e 's/([^*)]*\*)devfdt_get_addr(/dev_read_addr_ptr(/' I manually fixed drivers/usb/host/ehci-mx6.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-07-17i2c: designware_i2c: Support ACPI table generationSimon Glass3-1/+136
Update the PCI driver to generate ACPI information so that Linux has the full information about each I2C bus. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> [bmeng: Correct one typo in dw_i2c_gen_speed_config() comments] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17i2c: Add log_ret() on errorSimon Glass1-2/+2
Add a few of these calls to make it easier to see where an error occurs, if CONFIG_LOG_ERROR_RETURN is enabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-17i2c: designware_i2c: Add a little more debuggingSimon Glass1-5/+5
Add debugging for a few more values and also use log to show return values when something goes wrong. This makes it easier to see the root cause. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-17dm: acpi: Enhance acpi_get_name()Simon Glass1-10/+0
For many device types it is possible to figure out the name just by looking at its uclass or parent. Add a function to handle this, since it allows us to cover the vast majority of cases automatically. However it is sometimes impossible to figure out an ACPI name for a device just by looking at its uclass. For example a touch device may have a vendor-specific name. Add a new "acpi,name" property to allow a custom name to be created. With this new feature we can drop the get_name() methods in the sandbox I2C and SPI drivers. They were only added for testing purposes. Update the tests to use the new values. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17acpi: Support generation of I2C descriptorSimon Glass1-0/+11
Add a function to write a GPIO descriptor to the generated ACPI code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-09core: add support for U_BOOT_DRIVER_ALIASWalter Lozano1-0/+2
Currently when using OF_PLATDATA the binding between devices and drivers is done trying to match the compatible string in the node with a driver name. However, usually a single driver supports multiple compatible strings which causes that only devices which its compatible string matches a driver name get bound. To overcome this issue, this patch adds the U_BOOT_DRIVER_ALIAS macro, which generates no code at all, but allows an easy way to declare driver name aliases. Thanks to this, dtoc could be improve to look for the driver name based on its alias when it populates the U_BOOT_DEVICE entry. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-09drivers: rename drivers to match compatible stringWalter Lozano1-2/+2
When using OF_PLATDATA, the bind process between devices and drivers is performed trying to match compatible string with driver names. However driver names are not strictly defined, and also there are different names used when declaring a driver with U_BOOT_DRIVER, the name of the symbol used in the linker list and the used in the struct driver_info. In order to make things a bit more clear, rename the drivers names. This will also help for further OF_PLATDATA improvements, such as checking for valid driver names. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org> Add a fix for sandbox of-platdata to avoid using an invalid ANSI colour: Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7Patrick Delaunay1-1/+73
Read SYSCFG bindings to set Fast Mode Plus bits if Fast Mode Plus speed is selected. Handle the stm32mp15 specific compatible to handle FastMode+ registers handling which is different on the stm32mp15 compared to the stm32f7 or stm32h7. Indeed, on the stm32mp15, the FastMode+ set and clear registers are separated while on the other platforms (F7 or H7) the control is done in a unique register. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-09i2c: stm32f7: add stm32mp15 compatiblePatrick Delaunay1-0/+1
Add a new compatible "st,stm32mp15-i2c" introduced in Linux kernel v5.8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-07-09i2c: imx_lpi2c: Improve the codes to use private dataYe Li1-11/+11
Current driver calls the devfdt_get_addr to get the base address of lpi2c controller in each sub-functions. Since the devfdt_get_addr accesses the DTB and translate the address, it introduces much overhead. Improve the codes to use private variable which has recorded the base address from probe. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-09i2c: i2c-cortina: added CAxxxx I2C supportArthur Li4-0/+443
Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> hs: fixed build error, add include log.h
2020-07-09i2c: octeon_i2c: Add I2C controller driver for OcteonSuneel Garapati3-0/+858
Add support for I2C controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
2020-05-28i2c: observe scl_count in i2c_deblock_gpio_loop()Heinrich Schuchardt1-1/+1
When compiling with -Wtype-limits we see this error: drivers/i2c/i2c-uclass.c: In function ‘i2c_deblock_gpio_loop’: drivers/i2c/i2c-uclass.c:517:21: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits] 517 | while (scl_count-- >= 0) { | Don't loop forever. Fixes: 1f746a2c82b1 ("i2c: Make deblock delay and SCL clock configurable") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-28i2c: designware_i2c: Check if the device is poweredRaul E Rangel1-0/+17
If the device doesn't return a version that means the device is non-functional. The dw_i2c_regs had invalid offsets for the version field. I got the correct value from the DesignWare databook. It also matches what the Picasso PPR says. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Tested on chromebook_coral: Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-28i2c: designware_i2c: Tidy up use of NULL privSimon Glass1-11/+23
At present we still have pre-driver-model code in this driver and it makes things a bit confusing. In particular calc_bus_speed() is called with priv as NULL if not using driver model. This results in spk_cnt and comp_param1 being read from an invalid address if not using driver model. For comp_param1 this may not cause problems if reading from addresses close to 0 happens to be allowed, as high speed is only supported by DM code. But spk_cnt is subsequently used to calculate the bus periods and so this may cause problems (e.g. on spear600 board which has not been migrated yet). Add a new parameter regs parameter to calc_bus_speed() and add more comments to this function and to _dw_i2c_set_bus_speed(), which calls it. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass10-0/+10
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass24-0/+24
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass32-0/+32
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-15rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRATrevor Woerner1-1/+1
Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOODTrevor Woerner1-2/+2
Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5XTrevor Woerner1-1/+1
Have this symbol follow the pattern of all other such symbols. This patch removes a TODO from the code. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-10i2c: mxc: add fuse checkPeng Fan1-0/+17
Add fuse check for I2C. If the fuse indicates the module will not work in the SoC, let's fail the initialization. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-04-21Merge tag 'for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2cTom Rini6-2/+1065
i2c changes for 2020.07 - add new i2c driver for Broadcom iproc-based socs - fix cmd: eeprom: Staticize eeprom_i2c_bus - i2c: muxes: pca954x: add PCA9546 variant
2020-04-20drivers: i2c: add brcm iproc I2C driver supportRayagonda Kokatanur4-0/+1057
Add I2C driver support for Broadcom iproc-based socs. Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-20i2c: muxes: pca954x: add PCA9546 variantChris Packham2-2/+8
This adds the PCA9546 4-channel i2c bus switch. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-04-17doc: fix references to driver-modelHeinrich Schuchardt4-4/+4
Fix some errors pointed out by 'make refcheckdocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-03-24i2c: stm32f7_i2c: allows for any bus frequencyAlain Volmat1-46/+59
Do not limit to 3 (100KHz, 400KHz, 1MHz) bus frequencies, but instead allow for any frequency. Depending on the requested frequency (via the clock-frequency DT entry), use the spec data from either Standard, Fast or Fast Plus mode. In order to do so, the driver do not use anymore spec identifier by directly handle the requested frequency and from it retrieve the corresponding spec data to be used for the computation of the timing register. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-16i2c: designware_i2c: add 'hs_hcnt' and 'hs_lcnt' for high speedJun Chen2-0/+7
Add support for high speed if scl_sda_cfg exist. Signed-off-by: Jun Chen <ptchentw@gmail.com> Signed-off-by: Jun Chen <jun.chen@vatics.com>
2020-03-16i2c: designware_i2c: remove 'has_high_speed'Jun Chen2-4/+1
Remove 'has_high_speed' config since we can check high speed support from IC_COMP_PARAM_1 register. Signed-off-by: Jun Chen <ptchentw@gmail.com> Signed-off-by: Jun Chen <jun.chen@vatics.com>
2020-03-16i2c: designware_i2c: check is high speed possible supportJun Chen2-0/+13
To read IC_COMP_PARAM_1[3:2] to check is high speed possible, and fall back to fast mode if not. Signed-off-by: Jun Chen <ptchentw@gmail.com> Signed-off-by: Jun Chen <jun.chen@vatics.com>
2020-03-16i2c: designware_i2c: Fix IC_CON register setting for high speed modeJun Chen1-1/+1
IC_CON[2:1] should be 3 for high speed mode Signed-off-by: Jun Chen <ptchentw@gmail.com> Signed-off-by: Jun Chen <jun.chen@vatics.com>
2020-03-16dm: i2c-gpio: add support for clock stretchingHeiko Schocher1-1/+22
This adds support for clock stretching to the i2c-gpio driver. This is accomplished by switching the GPIO used for the SCL line to an input when it should be driven high, and polling on the SCL line value until it goes high (indicating that the I2C slave is no longer pulling it low). This is enabled by default; for gpios which cannot be configured as inputs, the i2c-gpio,scl-output-only property can be used to fall back to the previous behavior. Signed-off-by: Michael Auchter <michael.auchter@ni.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-03-16dm: i2c-gpio: rework gpio get/set functionsMichael Auchter1-69/+64
This patch reworks i2c-gpio to make it easier to switch out the implementation of the sda/scl get/set functions. This is in preparation for a patch to conditionally implement clock stretching support. Signed-off-by: Michael Auchter <michael.auchter@ni.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-03-16i2c: gpio: Run deblock sequence on probeMarek Vasut1-0/+16
Add deblock dequence for the I2C bus, needed on some devices. This sequence is issued once, when probing the driver, and is controlled by DT property, "i2c-gpio,deblock". Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-03-16i2c: Add option to send start condition after deblockingMarek Vasut1-3/+20
Add option to send start condition after deblocking SDA. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-03-16i2c: Export i2c_deblock_gpio_loop()Marek Vasut1-4/+4
Export the i2c_deblock_gpio_loop() so it can be used in other places in U-Boot. In particular, this is useful in the GPIO I2C driver, which claims the SDA/SCL GPIOs and thus prevents the i2c_deblock() implementation from claiming the pins as GPIOs again. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
generated by cgit v1.1 at 2024-08-12 21:31:09 +0000