aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-uclass.c
AgeCommit message (Collapse)AuthorFilesLines
2020-07-17gpio: Add a method to convert a GPIO to ACPISimon Glass1-0/+22
When generating ACPI tables we need to convert GPIOs in U-Boot to the ACPI structures required by ACPI. This is a SoC-specific conversion and cannot be handled by generic code, so add a new GPIO method to do the conversion. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-07gpio: search for gpio label if gpio is not found through bank nameHeiko Schocher1-0/+46
dm_gpio_lookup_name() searches for a gpio through the bank name. But we have also gpio labels, and it makes sense to search for a gpio also in the labels we have defined, if no gpio is found through the bank name definition. This is useful for example if you have a wp pin on different gpios on different board versions. If dm_gpio_lookup_name() searches also for the gpio labels, you can give the gpio an unique label name and search for this label, and do not need to differ between board revisions. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Don't enable by default] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-05gpio-uclass.c: save the GPIOD flags also in the gpio descriptorHeiko Schocher1-4/+4
save the GPIOD_ flags also in the gpio descriptor. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Fixes: 788ea834124b ("gpio: add function _dm_gpio_set_dir_flags") Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Walter Lozano <walter.lozano@collabora.com>
2020-05-18common: Drop log.h from common headerSimon Glass1-1/+2
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-11gpio: emulate open drain & open source in dm_gpio_set_value()Neil Armstrong1-0/+15
Handle the GPIOD_OPEN_DRAIN & GPIOD_OPEN_SOURCE flags to emulate open drain and open source by setting the GPIO line as input depending on the requested value. The behaviour is taken from the Linux gpiolib. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add ops to set dir flagsPatrick Delaunay1-5/+12
Add the ops for GPIO driver set_dir_flags() to set the dir flags. The user can update the direction and configuration of each GPIO with a only call to dm_gpio_set_dir_flags() or dm_gpio_set_dir() and respecting the configuration provided by device tree (saved in desc->flags). When these optional ops are absent, the gpio uclass use the mandatory ops (direction_output, direction_input, get_value) and desc->flags to manage only the main dir flags: - GPIOD_IS_IN - GPIOD_IS_OUT - GPIOD_IS_OUT_ACTIVE - GPIOD_ACTIVE_LOW Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add ops to get dir flagsPatrick Delaunay1-6/+25
Add the ops for GPIO driver get_dir_flags(), allows to get dynamically the current gpio configuration; it is used by the API function dm_gpio_get_dir_flags(). When these optional ops are absent, the gpio uclass continues to use the mandatory ops (direction_output, direction_input, get_value) and value of desc->flags to manage only the main dir flags: - GPIOD_IS_IN - GPIOD_IS_OUT - GPIOD_IS_OUT_ACTIVE - GPIOD_ACTIVE_LOW Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add support of new GPIO direction flagPatrick Delaunay1-0/+30
This commit manages the new dir flags that can be used in gpio specifiers to indicate the pull-up or pull-down resistor configuration for output gpio (GPIO_PULL_UP, GPIO_PULL_DOWN) or the Open Drain/Open Source configuration for input gpio (GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE). These flags are already supported in Linux kernel in gpio lib. This patch only parse and save the direction flags in GPIO descriptor (desc->flags), it prepares the introduction of new ops to manage them. The GPIO uclass supports new GPIO flags from device-tree (GPIO_XXX define in include/dt-bindings/gpio/gpio.h) and translate them in the dir flags (GPIOD_XXX): - GPIO_PULL_UP => GPIOD_PULL_UP - GPIO_PULL_DOWN => GPIOD_PULL_DOWN - GPIO_OPEN_DRAIN => GPIOD_OPEN_DRAIN - GPIO_OPEN_SOURCE => GPIOD_OPEN_SOURCE This patch also adds protection in the check_dir_flags function for new invalid configuration of the dir flags. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: update dir_flags managementPatrick Delaunay1-2/+25
Update the flag management in GPIO uclass: the desc->flags is always combined with the requested flags and the GPIO descriptor is updated for further call. Add a function dm_gpio_get_dir_flags to get dynamically the current dir_flags (configuration and value). This patch prepare introduction of the dir flags support with new ops. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add helper GPIOD_FLAGS_OUTPUTPatrick Delaunay1-6/+3
Add a macro to provide the GPIO output value according the dir flags content. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add function check_dir_flagsPatrick Delaunay1-0/+25
Add a dir flags validity check with a new function check_dir_flags. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add function _dm_gpio_set_dir_flagsPatrick Delaunay1-13/+25
Introduce the function _dm_gpio_set_dir_flags to set dir flags without check if the GPIO is reserved. Separate the reserved check for "set_dir" and "set_dir_flags". This patch is a preliminary step to add new ops. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add function _gpio_get_valuePatrick Delaunay1-4/+10
Introduce the function _gpio_get_value to get the GPIO value without check if it is reserved. This patch prepare new ops introduction. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add gpio descriptor initialization helperPatrick Delaunay1-8/+19
Add a helper function gpio_desc_init() to initialize the gpio descriptor; with this function the flags will be always set to 0. It wasn't the case before this patch in dm_gpio_lookup_name. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16gpio: remove the open_drain API and opsPatrick Delaunay1-36/+0
This patch removes the ops get_open_drain/set_open_drain and the API dm_gpio_get_open_drain/dm_gpio_set_open_drain. The ops only provided in one driver (mpc8xxx gpio) and the associated API is never called in boards. This patch prepare a more generic set/get_dir_flags ops, including the open drain property. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-02-05gpio: Rename free() to rfree()Simon Glass1-4/+4
This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-08spl: Allow tiny printf() to be controlled in SPL and TPLSimon Glass1-2/+2
At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-29gpio: fixes for gpio-hog supportHeiko Schocher1-28/+75
recently added gpio hog patch was "in discussion" state with Simon Glass. This patch now adds most of comments from Simon Glass. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-13gpio: add gpio-hog supportHeiko Schocher1-16/+165
add gpio-hog support. GPIO hogging is a mechanism providing automatic GPIO request and configuration as part of the gpio-controller's driver probe function. for more infos see: doc/device-tree-bindings/gpio/gpio.txt Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Michal Simek <michal.simek@xilinx.com> (zcu102) Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-19gpio: dm: Support manual relocation for gpioMichal Simek1-0/+35
Relocate gpio ops as was done by: "dm: Add support for all targets which requires MANUAL_RELOC" (sha1: 484fdf5ba058b07be5ca82763aa2b72063540ef3) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-06gpio: uclass: Fix debug stringMario Six1-1/+1
A debug string still has the old name of a function being called; update it. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-06gpio: add static to get_function()Masahiro Yamada1-2/+2
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-01dm: gpio: Add live tree supportSimon Glass1-28/+23
Add support for requesting GPIOs with a live device tree. This involves adjusting the function signature for the legacy function gpio_request_by_name_nodev(), so fix up all callers. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes to stm32f746-disco.c: Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-01dm: gpio: Refactor to prepare for live tree supportSimon Glass1-21/+30
Move the main part of the GPIO request function into a separate function so that it can be used by the live tree function when added. Update the xlate method to use a node reference. Update all GPIO drivers to handle the modified xlate() method. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-12gpio-uclass.c: Fix comparison of unsigned expression warningTom Rini1-1/+1
We declare that gpio_base (which is the base for counting gpios, not an address) is unsigned. Therefore the comparison with >= 0 is always true. As the desire is to allow for this base number to be 0, we can just drop this check. Reported by clang-3.8. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-08dm: core: Replace of_offset with accessorSimon Glass1-3/+3
At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-06-03dm: gpio: Add methods for open drain settingmario.six@gdsys.cc1-0/+32
Certain GPIO devices have the capability to switch their GPIOs into open-drain mode, that is, instead of actively driving the output (Push-pull output), the pin is connected to the collector (for a NPN transistor) or the drain (for a MOSFET) of a transistor, respectively. The pin then either forms an open circuit or a connection to ground, depending on the state of the transistor. This patch adds functions to the GPIO uclass to switch GPIOs to open-drain mode on devices that support it. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2016-05-17dm: gpio: add a default gpio xlate routineEric Nelson1-7/+23
Many drivers use a common form of offset + flags for device tree nodes. e.g.: <&gpio1 2 GPIO_ACTIVE_LOW> This patch adds a common implementation of this type of parsing and calls it when a gpio driver doesn't supply its' own xlate routine. This will allow removal of the driver-specific versions in a handful of drivers and simplify the addition of new drivers. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-03-17gpio: Use const where possibleSimon Glass1-5/+5
Some functions do not change the struct gpio_desc parameter. Update these to use const so this is clear. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17gpio: Add a function to obtain a GPIO vector valueSimon Glass1-0/+18
We can use GPIOs as binary digits for reading 'strapping' values. Each GPIO is assigned a single bit and can be set high or low on the circuit board. We already have a legacy function for reading these values. Add one that supports driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-25bug.h: move BUILD_BUG_* defines to include/linux/bug.hMasahiro Yamada1-0/+1
BUILD_BUG_* macros have been defined in several headers. It would be nice to collect them in include/linux/bug.h like Linux. This commit is cherry-picking useful macros from include/linux/bug.h of Linux 4.4. I did not import BUILD_BUG_ON_MSG() because it would not work if it is used with include/common.h in U-Boot. I'd like to postpone it until the root cause (the "error()" macro in include/common.h causes the name conflict with "__attribute__((error()))") is fixed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-20dm: gpio: Allow the uclass to work without printf()Simon Glass1-0/+8
For SPL we don't really need sprintf() and with tiny-printf this is not available. Allow this to be dropped in SPL when using tiny-printf. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-05dm: gpio: Check a GPIO is valid before using itSimon Glass1-1/+5
Since a gpio_desc is allowed to be invalid we should return an error indicating that the operation cannot be completed. This can happen if the GPIO is optional - e.g. some devices may have a reset line and some may not. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21dm: gpio: Add dm_gpio_request() to manually request a GPIOSimon Glass1-1/+1
This function can be used for testing to manually request a GPIO for use, without resorting to the legacy GPIO API. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21dm: gpio: Add dm_gpio_lookup_name() to look up a GPIO nameSimon Glass1-8/+26
Provide a driver-model function to look up a GPIO name. Make the standard function use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-08dm: gpio: uclass: Add flag to control sequence numberingBhuvanchandra DV1-0/+1
Like SPI and I2C few GPIO controllers also have multiple chip instances. This patch adds the flag 'DM_UC_FLAG_SEQ_ALIAS' in gpio_uclass driver to control device sequence numbering. By defalut the dev->r_seq for gpio_uclass will alwalys returns -1, which leads the gpio driver probe failure when using the driver with device trees. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
2015-05-13dm: gpio: Add error handling and a function to claim vector GPIOsSimon Glass1-3/+35
gpio_get_values_as_int() should return an error if something goes wrong. Also provide gpio_claim_vector(), a function to request the GPIOs and set them to input mode. Otherwise callers have to do this themselves. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-04-18dm: gpio: Add an implementation for gpio_get_number()Simon Glass1-0/+12
This has a prototype but no implementation. It returns the global GPIO number given a gpio_desc. It is useful for debugging in some cases. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18dm: gpio: request list: return the count if requests max_count reachedPrzemyslaw Marczak1-5/+1
The function gpio_request_list_by_name_nodev() returned -ENOSPC error, when the loop count was greater than requested count. This was wrong, because function should return the requested gpio count, when meets the call request without errors. Now, the loop ends on requested max_count. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-16dm: core: Add dev_get_uclass_priv() to access uclass private dataSimon Glass1-11/+11
Add a convenience function to access the private data that a uclass stores for each of its devices. Convert over most existing uses for consistency and to provide an example for others. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29dm: gpio: Add better functions to request GPIOsSimon Glass1-2/+164
At present U-Boot sort-of supports the standard way of reading GPIOs from device tree nodes, but the support is incomplete, a bit clunky and only works for GPIO bindings where #gpio-cells is 2. Add new functions to request GPIOs, taking full account of the device tree binding. These permit requesting a GPIO with a simple call like: gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN); This will request the GPIO, looking at the device's node which might be this, for example: cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>; The GPIO will be set to input mode in this case and polarity will be honoured by the GPIO calls. It is also possible to request and free a list of GPIOs. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29dm: gpio: Add a driver GPIO translation methodSimon Glass1-0/+16
Only the GPIO driver knows about the full GPIO device tree binding used by a device. Add a method to allow the driver to provide this information to the uclass, including the GPIO offset within the device and flags such as the polarity. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29dm: gpio: Add a native driver model APISimon Glass1-71/+147
So far driver model's GPIO uclass just implements the existing GPIO API. This has some limitations: - it requires manual device tree munging to support GPIOs in device tree (fdtdec_get_gpio() and friends) - it does not understand polarity - it is somewhat slower since we must scan for the GPIO device each time - Global GPIO numbering can change if other GPIO drivers are probed - it requires extra steps to set the GPIO direction and value The new functions have a dm_ prefix where necessary to avoid name conflicts but we can remove that when it is no-longer needed. The new struct gpio_desc holds all required information about the GPIO. For now this is intended to be stored by the client requesting the GPIO, but in future it might be brought into the uclass in some way. With these changes the old GPIO API still works, and uses the driver model API underneath. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21dm: gpio: Add a function to read an ID from a list of GPIOsSimon Glass1-0/+19
For board IDs a common approach is to set aside several GPIOs for use in determining the board ID. This can provide information about board features and the revision. Add a function that turns a list of GPIOs into an integer by assigning each GPIO to a single bit. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: gpio: Add gpio_requestf() helper for printf() stringsSimon Glass1-0/+21
Add a helper which permits a printf()-style format string for the requester string. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: Move the function for getting GPIO status into the uclassSimon Glass1-0/+39
This function can be more easily tested if it is in the uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: gpio: Add gpio_get_function() and friendsSimon Glass1-0/+47
Add helpers to the uclass to allow finding out the pin function. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: gpio: Implement GPIO reservation in the uclassSimon Glass1-14/+78
We have several GPIO drivers now and all are doing similar things to record which GPIOs are reserved. Move this logic into the uclass to make the drivers similar. We retain the request()/free() methods since currently one driver does use these for setting up the pin. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: gpio: Support numbered GPIOsSimon Glass1-12/+25
At present banks must be named and it is not possible to refer to GPIOs by number in driver model. Some boards use numbering - e.g. OMAP. It is fairly easy to support by detecting the absense of a bank name (which starts with a letter). Add support for numbered GPIOs in addition to the existing bank support. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-07-15 01:36:58 +0000