aboutsummaryrefslogtreecommitdiff
path: root/drivers/ddr
AgeCommit message (Collapse)AuthorFilesLines
2020-01-07arm: socfpga: Move Stratix10 and Agilex system manager common codeLey Foon Tan1-1/+1
Move Stratix10 and Agilex system manager common code to system_manager_soc64.h. Changed macros to use SYSMGR_SOC64_*. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move firewall code to firewall fileLey Foon Tan1-1/+1
Move firewall related code to new firewall.c, to share code in Stratix 10 and Agilex. SDMMC will transfer data to OCRAM in SPL. So, enable privilege for SDMMC to allow DMA transfer to OCRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Convert system manager from struct to definesLey Foon Tan2-10/+8
Convert system manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get system manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07ddr: imx8m: Return error values from LPDDR4 trainingFrieder Schrempf3-8/+20
In cases when the same SPL should run on boards with i.MX8MM, that differ in DDR configuration, it is necessary to try different parameters and check if the training done by the firmware suceeds or not. Therefore we return the DDR training/initialization success to the upper layer in order to be able to retry with different settings if necessary. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2020-01-06Merge branch 'next'Tom Rini1-7/+6
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2019-12-27imx8m: ddr_init: Move ddr_init() messages to debug levelFabio Estevam1-3/+3
Currently inside ddr_init() there is a mix of printf() and debug() level messages. Since this type of information is useful for debug purposes, convert all of them to debug level for consistency. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-12-23mpc85xx: ddr: Always start DDR RAM in Self Refresh modeJoakim Tjernlund1-7/+6
Some of t1042 boards fails DDR init with an Automatic calibration error every now and then. Investigations revealed that true Warm boots never failed. Warm boots has some extra steps performed, one being to start DDRC in Self Refresh and then clearing SR right after. Applying this SR method unconditionally made all our boards stable again, regardless of Cold/Warm boot. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-02common: Move some cache and MMU functions out of common.hSimon Glass2-0/+2
These functions belong in cpu_func.h. Another option would be cache.h but that code uses driver model and we have not moved these cache functions to use driver model. Since they are CPU-related it seems reasonable to put them here. Move them over. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-11-20ddr: socfpga: gen5: constify altera_gen5_sdram_opsSimon Goldschmidt1-1/+1
Make the function pointer struct const, as it does not need to be writable. This doesn't really change anything other than moving this variable to a different section. No functional change. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-10-08ddr: imx8m: Fix the ddr init hang on imx8mqJacky Bai1-4/+4
On, i.MX8MQ, the PLL config must be done when ddrmix isolation is released. So move the dram pll init after iso config done. For other i.MX8M SOC, either init pll before or after isolation is ok. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08driver: ddr: Refine the ddr init driver on imx8mJacky Bai7-311/+184
Refine the ddr init driver to make it more reusable for different DDR type(LPDDR4, DDR4 & DDR3L). So we can reduce some redundant code. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8mq: Update the ddrc QoS setting for B1 chipBai Ping1-1/+4
Update the ddrc Qos setting for B1 to align with B0's setting. Correct the initial clock for dram_pll. This setting will be overwrite before ddr phy training. Although there is no impact on the dram init, we still need to correct it to eliminate confusion. Signed-off-by: Bai Ping <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Tested-by: Robby Cai <robby.cai@nxp.com>
2019-10-08ddr: imx8m: Fix ddr4 driver build issueYe Li1-2/+1
Since the parameter of dram_pll_init is changed, update to use new. Also remove non-existed header file. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08ddr: imx8m: fix ddr firmware location when enable SPL OFPeng Fan1-1/+11
With CONFIG_SPL_OF_CONTROL, the device tree will be padded to end of the u-boot-spl-nodtb.bin, however we also put the ddr firmware file to this location, so need to adapt the code with SPL OF and align to 4 bytes to ease copy firmware. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-26ddr, fsl: add DM_I2C supportHeiko Schocher1-43/+76
add DM_I2C support for this driver. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22boards: lx2160a: Add support of I2C driver modelChuanhua Han1-1/+35
DM_I2C_COMPAT is a compatibility layer that allows using the non-DM I2C API when DM_I2C is used. When DM_I2C_COMPAT is not enabled for compilation, a compilation error will be generated. This patch solves the problem that the i2c-related api of the lx2160a platform does not support dm. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-11env: Move env_get_f() to env.hSimon Glass3-0/+3
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-21dm: ddr: socfpga: fix gen5 ddr driver to not use bssSimon Goldschmidt2-642/+740
This driver uses bss from SPL board_init_f(). Change it to move all the data from bss to a common struct allocated on the stack (64 byte). In addition to saving 28 bytes of bss, the code even gets 264 bytes smaller. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-21mpc83xx: Get rid of CONFIG_SYS_DDR_SDRAM_BASEMario Six1-0/+4
CONFIG_SYS_DDR_SDRAM_BASE is set to the same value as CONFIG_SYS_SDRAM_BASE on all existing boards. Just use CONFIG_SYS_SDRAM_BASE instead. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-06arm: socfpga: Move Stratix 10 SDRAM driver to DMLey Foon Tan3-77/+360
Convert Stratix 10 SDRAM driver to device model. Get rid of call to socfpga_per_reset() and use reset framework. SPL is changed from calling function in SDRAM driver directly to just probing UCLASS_RAM. Move sdram_s10.h from arch to driver/ddr/altera directory. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-05-06ddr: altera: Compile ALTERA SDRAM in SPL onlyLey Foon Tan2-3/+4
Compile ALTERA_SDRAM driver in SPL only. Rename ALTERA_SDRAM to SPL_ALTERA_SDRAM. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-25ddr: imx8m: hide i.MX8M DDR options from device driver entryPeng Fan1-0/+4
Use one menu to hide the several i.MX8M DDR options from device driver entry. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-17ddr: altera: Stratix10: Add ECC memory scrubbingLey Foon Tan1-0/+81
Scrub memory content if ECC is enabled and it is not from warm reset boot. Enable icache and dcache before scrub memory and use "DC ZVA" instruction to clear memory to zeros. This instruction writes a cache line at a time and it can prevent false ECC error trigger if write cache line partially. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17ddr: altera: Stratix10: Add multi-banks DRAM size checkLey Foon Tan1-5/+41
Stratix 10 maps dram from 0 to 128GB. There is a 2GB hole in the memory for peripherals and other IO from 2GB to 4GB. However the dram controller ignores upper address bits for smaller dram configurations. Example: a 4GB dram maps to multiple locations, every 4GB on the address. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17ddr: altera: stratix10: Move SDRAM size check to SDRAM driverLey Foon Tan1-0/+15
Move SDRAM size check to SDRAM driver. sdram_calculate_size() is called in SDRAM initialization already, avoid calling twice in size check function. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-04-17arm: socfpga: move gen5 SDR driver to DMSimon Goldschmidt4-16/+173
To clean up reset handling for socfpga gen5, port the DDR driver to DM using UCLASS_RAM and implement proper reset handling. This gets us rid of one ad-hoc call to socfpga_per_reset(). The gen5 driver is implemented in 2 distinct files. One of it (containing the calibration training) is not touched much and is kept at using hard coded addresses since the code grows even more otherwise. SPL is changed from calling hard into the DDR driver code to just probing UCLASS_RESET and UCLASS_RAM. It is happy after finding a RAM driver after that. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-04-12arm: mvebu: Add Marvell's integrated CPUsChris Packham1-0/+4
Marvell's switch chips with integrated CPUs (collectively referred to as MSYS) share common ancestry with the Armada SoCs. Some of the IP blocks (e.g. xor) are located at different addresses and DFX server exists as a separate target on the MBUS (on Armada-38x it's just part of the core complex registers). Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19mv_ddr: ddr3: only use active chip-selects when tuning ODTChris Packham1-1/+2
Inactive chip-selects will give invalid values for read_sample so don't consider them when trying to determine the overall min/max read sample. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/18] Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-19mv_ddr: ddr3: fix tRAS timimg parameterChris Packham1-4/+4
Based on the JEDEC standard JESD79-3F. The tRAS timings should include the highest speed bins at a given frequency. This is similar to commit 683c67b ("mv_ddr: ddr3: fix tfaw timimg parameter") where the wrong comparison was used in the initial implementation. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/15] Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-03-09ddr: socfpga: Clean up ddr_setup()Marek Vasut1-28/+15
Replace the current rather convoluted code using ad-hoc polling mechanism with a more straightforward code. Use wait_for_bit_le32() to poll the DDRCALSTAT register instead of local reimplementation. It makes no sense to pull for 5 seconds before giving up and trying to restart the EMIF, so instead wait 500 mSec for the calibration to complete and if this fails, restart the EMIF and try again. Perform this 32 times instead of 3 times as the original code did. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ddr: socfpga: Clean up EMIF resetMarek Vasut1-26/+7
The EMIF reset code can well use wait_for_bit_le32() instead of all that convoluted polling code. Reduce the timeout from 100 seconds to 1 second, since if the EMIF fails to reset itself in 1 second, it's unlikely longer wait would help. Make sure to clear the EMIF reset request even if the SEQ2CORE_INT_RESP_BIT isn't asserted. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ddr: socfpga: Fix EMIF clear timeoutMarek Vasut1-14/+11
The current EMIF clear timeout handling code was applying bitwise operations to signed data types and as it was, was extremely hard to read. Replace it with simple wait_for_bit(). Expand the error handling to make it more readable too. This patch also changes the timeout for emif_clear() from 14 hours to 1 second. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ddr: socfpga: Fix newline in debug print on A10Marek Vasut1-1/+1
The debug print is missing a newline, add it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-09ddr: socfpga: Fix IO in Arria10 DDR driverMarek Vasut1-3/+3
The Altera Arria10 DDR driver was using constants in a few places instead of reading registers associated with those constants, fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-03-03configs: fsl: move DDR specific defines to KconfigRajesh Bhagat1-0/+12
Moves below DDR specific defines to Kconfig: CONFIG_FSL_DDR_BIST CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE CONFIG_FSL_DDR_INTERACTIVE CONFIG_FSL_DDR_SYNC_REFRESH Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19drivers/ddr/fsl: Update fsl_ddr_board_options as weak functionPriyanka Jain1-3/+6
fsl_ddr_board_options is generally defined in board board's ddr.c, but some boards like lx2160ardb board does not need this function. Defining fsl_ddr_board_options as weak function to resolve compilation errors for such boards. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [PK: Fix checkpatch warnings] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-01-01drivers: ddr: introduce DDR driver for i.MX8MPeng Fan10-0/+1510
Introduce DDR driver for i.MX8M. The driver will be used by SPL to initialze DDR PHY and DDR Controller. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-12-10Merge tag 'fsl-qoriq-for-v2019.01-rc2' of git://git.denx.de/u-boot-fsl-qoriqTom Rini1-0/+1
Add TFA boot flow for some Layerscape platforms Add support for lx2160a SoC [trini: Add a bunch of missing MAINTAINERS entries] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-09ARM: mvebu: restore license information in mv_ddr_plat.{c,h}Chris Packham2-0/+9
This was unintentionally removed when syncing with upstream. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2018-12-08ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-18.09.02Chris Packham31-1254/+1156
This syncs drivers/ddr/marvell/a38x/ with the mv_ddr-armada-18.09 branch of https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. Specifically this syncs with commit 99d772547314 ("Bump mv_ddr to release armada-18.09.2"). The complete log of changes is best obtained from the mv-ddr-marvell.git repository but some relevant highlights are: ddr3: add missing txsdll parameter ddr3: fix tfaw timimg parameter ddr3: fix trrd timimg parameter merge ddr3 topology header file with mv_ddr_topology one mv_ddr: a38x: fix zero memory size scrubbing issue The upstream code is incorporated omitting the portions not relevant to Armada-38x and DDR3. After that a semi-automated step is used to drop unused features with unifdef find drivers/ddr/marvell/a38x/ -name '*.[ch]' | \ xargs unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 \ -UCONFIG_APN806 -UCONFIG_MC_STATIC \ -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_64BIT -UCONFIG_A3700 -UA3900 -UA80X0 \ -UA70X0 Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-12-06armv8: lx2160a: Add LX2160A SoC SupportPriyanka Jain1-0/+1
LX2160A Soc is based on Layerscape Chassis Generation 3.2 architecture with features: 16 ARM v8 Cortex-A72 cores in 8 cluster, CCN508, SEC, 2 64-bit DDR4 memory controller, RGMII, 8 I2C controllers, 3 serdes modules, USB 3.0, SATA, 4 PL011 SBSA UARTs, 4 TZASC instances, etc. SoC personalites: LX2120A is SoC with Twelve 64-bit ARM v8 Cortex-A72 CPUs LX2080A is SoC with Eight 64-bit ARM v8 Cortex-A72 CPUs Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-15socfpga: stratix10: fix sdram_calculate_sizeDalon Westergreen1-2/+2
Incorrect type of size variable results in 0 being returned for sdram sizes greater than or equal to 4GB. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2018-07-26drivers/ddr/fsl: fix '__hwconfig without a buffer' messagesJeremy Gebben1-8/+6
Pass an empty buffer instead of NULL if the hwconfig environment variable isn't set. Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com> Cc: Stefano Babic <sbabic@denx.de> Cc: York Sun <york.sun@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-12ddr: altera: Add ECC DRAM scrubbing support for Arria10Marek Vasut1-0/+27
The SDRAM must first be rewritten by zeroes if ECC is used to initialize the ECC metadata. Make the CPU overwrite the DRAM with zeroes in such a case. This scrubbing implementation turns the caches on temporarily, then overwrites the whole RAM with zeroes, flushes the caches and turns them off again. This provides satisfactory performance. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-07-12ddr: altera: Drop custom dram_bank_mmu_setup() on Arria10Marek Vasut1-25/+0
This function was never used in SPL and the default implementation of dram_bank_mmu_setup() does the same thing. The only difference is the part which configures OCRAM as cachable, which doesn't really work as it covers more than the OCRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-07-12ddr: altera: stratix10: Add DDR support for Stratix10 SoCLey Foon Tan2-0/+389
Add DDR support for Stratix SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-05-20SPDX: Fixup SPDX tags in a few new filesTom Rini1-2/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-18configs: Add DDR Kconfig support for Arria 10Tien Fong Chee1-1/+1
This patch enables DDR Kconfig support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Add DDR driver for Arria 10Tien Fong Chee2-0/+742
Add DDR driver support for Arria 10. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2018-05-18ARM: socfpga: Rename the gen5 sdram driver to more specific nameTien Fong Chee2-1/+1
Current sdram driver is only applied to gen5 device, hence it is better to rename sdram driver to more specific name which is related to gen5 device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
generated by cgit v1.1 at 2024-09-16 22:30:58 +0000