aboutsummaryrefslogtreecommitdiff
path: root/drivers/ddr
AgeCommit message (Collapse)AuthorFilesLines
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass5-0/+5
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-23imx: ddr: imx8m: Move selfref_en after DDR scrubYe Li1-2/+3
When doing DDR scrub, the DDR may enter into self refresh if the selfref_en is enabled before DDR scrub. This will cause scrub can't complete that SBRSTAT.scrub_done won't be set. Since the selfref_en can be programmed during the course of normal operation, move it after DDR scrub Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-05Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextWIP/05Jan2021-nextTom Rini4-5/+5
Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
2021-01-05Merge tag 'v2021.01-rc5' into nextTom Rini1-0/+1
Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05dm: Use access methods for dev/uclass private dataSimon Glass4-5/+5
Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
2020-12-13dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass5-23/+23
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass2-4/+4
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass4-7/+7
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass2-4/+4
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-10armv8: lx2162a: Add Soc changes to support LX2162AMeenakshi Aggarwal1-0/+1
LX2162 is LX2160 based SoC, it has same die as of LX2160 with different packaging. LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module, microSD card, eMMC support, serial console, qspi nor flash, qsgmii, sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes interface to support three PCIe gen3 interface. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Fixed whitespace errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-22ARM: mvebu: a38x: Fix comment typoNaoki Hayama1-1/+1
%s/occured/occurred/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22common: rename getc() to getchar()Heinrich Schuchardt1-1/+1
The sandbox is built with the SDL2 library with invokes the X11 library which in turn calls getc(). But getc() in glibc is defined as int getc(FILE *) This does not match our definition. int getc(void) The sandbox crashes when called with parameter -l. Rename our library symbol getc() to getchar(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-27imx8m: ddrphy_utils: Improve coding styleFabio Estevam1-14/+15
Currently checkpatch is not happy about this file: total: 14 errors, 2 warnings, 7 checks, 359 lines checked Improve the coding style so that it can now report: total: 0 errors, 0 warnings, 6 checks, 360 lines checked Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada4-6/+6
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-14drivers: ddr: imx Workaround for i.MX8M DDRPHY rank to rank issueOliver Chen3-0/+174
Add logic to automatically update umctl2's setting based on phy training CDD value for rank to rank space issue Acked-by: Ye Li <ye.li@nxp.com> Signed-off-by: Oliver Chen <Oliver.Chen@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14drivers: ddr: imx8mp: Add inline ECC feature supportSherry Sun2-0/+79
the DRAM Controller in i.MX8MP will support a feature called "Inline ECC". This is supported for all 3 supported DRAM technologies (LPDDR4, DDR4 and DDR3L). When this feature is enabled by software, the DRAM Controller reserves 12.5% of DRAM capacity for ECC information, and presents only the non-ECC portion (lower 87.5% of the installed capacity of DRAM) to the rest of the SoC. The DRAM memory can be divided into 8 regions so that if a use case only requires ECC protection on a subset of memory, then only that subset of memory need support inline ECC. If this occurs, then there is no performance penalty accessing the non-ECC-protected memory (no need to access ECC for this portion of the memory map). This is all configured with the DRAM Controller. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14driver: ddr: imx: correct the pwrctl setting of selfref_en on imx8mJacky Bai1-1/+1
The 'selfref_en' should be bit'0', so correct the setting to enable the auto self-refresh. Reviewed-by: Jian Li <jian.li@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14driver: ddr: imx: skip ddr_ss_gpr config on imx8mnJacky Bai1-1/+1
There is no DDR_SS_GPR0 exits on i.MX8MN, so skip setting this register on i.MX8MN. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-09mv_ddr: ddr3: Update {min,max}_read_sample calculationChris Packham1-2/+2
Measurements on actual hardware shown that the read ODT is early by 3 clocks. Adjust the calculation to avoid this. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [upstream https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/22] Signed-off-by: Chris Packham <judge.packham@gmail.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09mv_ddr: ddr3: Use correct bitmask for read sample delayChris Packham1-1/+1
In the Armada 385 functional spec (MV-S109094-00 Rev. C) the read sample delay fields are 5 bits wide. Use the correct bitmask of 0x1f when extracting the value. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [upstream https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/22] Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-04ddr: Rework errata A008109, A008378, 009942 workaroundJaiprakash Singh3-65/+107
Move errata A008109, A008378, 009942 workaround implementation from compute_fsl_memctl_config_regs() to fsl_ddr_set_memctl_regs() and add register write after each workaround implementation. Signed-off-by: Jaiprakash Singh <Jaiprakash.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04ddr: fsl: Impl. Erratum A008109Joakim Tjernlund2-0/+9
Impl. erratum as descibed in errata doc. Enable A008109 for T1040 and T1024 Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass8-0/+8
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass18-0/+18
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bug.h from common headerSimon Glass1-0/+1
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass33-0/+33
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass1-0/+1
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass3-0/+3
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass2-0/+2
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-14arm: mvebu: drivers/ddr: remove redundant assignmentHeinrich Schuchardt1-4/+0
The value of local variable ecc is immediately overwritten. So we can remove the first assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-14ddr: marvell: a38x: Allow boards to specify CK_DELAY parameterChris Packham4-0/+19
For some layouts it is necessary to adjust the CK_DELAY parameter to successfully complete DDR training. Add the ability to specify the CK_DELAY in the mv_ddr_topology_map. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2020-04-10Revert "mpc85xx: ddr: Always start DDR RAM in Self Refresh mode"Biwen Li1-6/+7
This reverts commit 2a5d5d27edfbdb0e02a7fcf05569f92c02ae44ee. The commit breaks uboot boot (hang in ddr init) on many PowerPC boards like P3041DS, P4080DS Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-02-11Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini2-0/+2
sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass2-0/+2
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05ddr: altera: Add DDR2 support to Gen5 driverMarek Vasut3-38/+163
Add DDR2 support to Gen5 DRAM driver. As the DDR2 macro names generated by Quartus are named differently than the DDR3 ones, use anon unions to store them in the same structures, without growing their size. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-26arm: mvebu: fix A38x breakage from commit bb872dd930ccJoel Johnson1-1/+1
This function parameter usage of load_addr was incorrectly caught in the clarifying renames of commit bb872dd930cc, which results in boot failures on Marvell A38x. Signed-off-by: Joel Johnson <mrjoel@lixil.net> Patch-to: Simon Glass <sjg@chromium.org>
2020-01-21ddr: marvell: a38x: allow board specific clock out setupBaruch Siach2-2/+11
DDR clock out might be unrelated to the number of active chip-select. For example, the board might have two DDR components, but only one chip-select. The clk_enable mask allows the board to enable DDR clocks regardless of active chip-selects. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-17common: Move hang() to the same header as panic()Simon Glass3-0/+3
At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-17common: Move RAM-sizing functions to init.hSimon Glass2-0/+2
These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17common: Move the image globals into image.hSimon Glass1-0/+1
These three globals relate to image handling. Move them to the image header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17image: Rename load_addr, save_addr, save_sizeSimon Glass1-3/+3
These global variables are quite short and generic. In fact the same name is more often used locally for struct members and function arguments. Add a image_ prefix to make them easier to distinguish. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini1-0/+4
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini8-458/+691
2020-01-08ddr: imx8m: Add DRAM PLL to generate 1000Mhz outputPeng Fan1-0/+4
We will generate DRAM 4000MT/s as default for i.MX8MP. So need DRAM PLL to generate 1000Mhz clock to DDR PHY and controller. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-07Merge tag 'u-boot-imx-20200107' of ↵Tom Rini3-8/+20
https://gitlab.denx.de/u-boot/custodians/u-boot-imx New for 2020.04 --------------- - New boards Embedded Artists COM board Xea Board - Switch to DM: Aristainetos boards Toradex colibri (DM_ETH) iCubox GE bx50v3 mx7dsabre (DM_ETH) cx9020 - New features: Bootaux with elf files Default SYS_THUMB_BUILD for i.MX6/7 - Fixes: DHCOM i.MX6 PDK Engicam i.MX8M tools (imx8m_image) Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07ddr: socfpga: Enable ARM64 Non-Secure SDRAM ECC AccessThor Thayer2-6/+6
The ECC registers in the SDRAM HMC Adapter should always be accessible (both when ECC is enabled and disabled). Currently, the registers are accessible only when ECC is enabled. The ECC Enabled bit is used to determine the status of ECC by later OSes so always allow access. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-01-07arm: socfpga: stratix10: Enable SMMU accessThor Thayer1-0/+14
Enable TCU access through the Stratix10 CCU so that the SMMU can access the SDRAM. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-01-07ddr: altera: agilex: Add SDRAM driver for AgilexLey Foon Tan5-3/+174
Add SDRAM driver for Agilex SoC. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07ddr: altera: Restructure Stratix 10 SDRAM driverLey Foon Tan5-443/+493
Restructure Stratix 10 SDRAM driver. Move common code to separate file, in preparation to support SDRAM driver for Agilex. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: Move Stratix10 and Agilex system manager common codeLey Foon Tan1-1/+1
Move Stratix10 and Agilex system manager common code to system_manager_soc64.h. Changed macros to use SYSMGR_SOC64_*. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
generated by cgit v1.1 at 2024-09-11 17:25:21 +0000