aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2021-09-03Revert most of the series for adding vexpress_aemv8r supportWIP/03Sep2021-nextTom Rini5-70/+2
Per a request from Andre Przywara and agreed with by Peter Hoyes, the vexpress aemv8r support wasn't quite ready to be merged, but the discussion had moved off list. We should keep the first patch in the series for now, but revert the rest. This reverts the following commits: e0bd6f31ce41 doc: Add documentation for the Arm vexpress board configs 30e5a449e8c7 arm: Use armv8_switch_to_el1 env to switch to EL1 b53bbca63bf4 vexpress64: Add BASER_FVP vexpress board variant 2f5b7b74903f armv8: Add ARMv8 MPU configuration logic 37a757e227cc armv8: Ensure EL1&0 VMSA is enabled Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-02doc: Add documentation for the Arm vexpress board configsPeter Hoyes4-1/+69
Create a new documentation section for Arm Ltd boards with a sub-page for the vexpress board (FVP-A, FVP-R and Juno). Document how the armv8_switch_to_el1 environment variable can be used to switch between booting from S-EL2/S-EL1 at runtime on the BASER_FVP. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-02vexpress64: Add BASER_FVP vexpress board variantPeter Hoyes1-1/+1
The BASER_FVP board variant is implemented on top of the BASE_FVP board config (which, in turn, is based on the Juno Versatile Express board config). They all share a similar memory map - for BASER_FVP the map is inverted from the BASE_FVP (https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map) * Create new TARGET_VEXPRESS64_BASER_FVP target, which uses the same board config as BASE_FVP and JUNO * Adapt vexpress_aemv8a.h header file to support BASER_FVP (and rename to vexpress_aemv8.h) * Enable config to switch to EL1 for the BASER_FVP * Create vexpress_aemv8r defconfig * Provide an MPU memory map for the BASER_FVP For now, only single core boot is supported. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> [trini: Add MAINTAINERS, move BOOTCOMMAND to defconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-01board: stemmy: Update documentationStephan Gerhold3-0/+91
Over the time, the "stemmy" U-Boot board was tested on several other Samsung smartphones based on ST-Ericsson NovaThor Ux500. Convert the documentation to reStructuredText at doc/board/ste/stemmy.rst and make the device list complete. Also note that the board now boots into USB Fastboot instead of just ending up at the U-Boot prompt. The device table is mostly taken from the postmarketOS wiki article (https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500). All the newly added devices were tested by Linus Walleij. Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-09-01scripts/checkpatch.pl: Resync with v5.13Tom Rini2-0/+756
This resyncs us with the version found in v5.13 of the Linux kernel with the following exceptions: - Keep our u-boot specific tests / code area. - Change the location of checkpatch.rst (which we now import) - Drop the "use strscpy" test as we don't have that, but do have strlcpy and want that used now. - Keep debug/printf in the list for $logFunctions And note that we now also include the spdxcheck.py tool that checkpatch.pl supports calling out to, and include upstream's checkpatch.rst in our develop section of the documentation. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Merge branch 'next' of ↵WIP/31Aug2021-nextTom Rini1-0/+19
https://gitlab.denx.de/u-boot/custodians/u-boot-marvell into next - Handling all DM watchdogs in watchdog_reset() (Rasmus)
2021-08-31Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini1-2/+2
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31qfw: Switch to CONFIG_SYS_LOAD_ADDR from CONFIG_LOADADDRTom Rini1-1/+1
All platforms define CONFIG_SYS_LOAD_ADDR, but only some define CONFIG_LOADADDR. Very very rarely are these not the same address, and qemu-ppce500 is one such case. However, based on reading the history of the code, this mismatched value was simply a copy-paste from other PowerPC platforms where it is this unused currently. Switch the code to use CONFIG_SYS_LOAD_ADDR and update the documentation. Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-08-31watchdog: add gpio watchdog driverRasmus Villemoes1-0/+19
A rather common kind of external watchdog circuit is one that is kept alive by toggling a gpio. Add a driver for handling such a watchdog. The corresponding linux driver apparently has support for some watchdog circuits which can be disabled by tri-stating the gpio, but I have never actually encountered such a chip in the wild; the whole point of adding an external watchdog is usually that it is not in any way under software control. For forward-compatibility, and to make DT describe the hardware, the current driver only supports devices that have the always-running property. I went a little back and forth on whether I should fail ->probe or only ->start, and ended up deciding ->start was the right place. The compatible string is probably a little odd as it has nothing to do with linux per se - however, I chose that to make .dts snippets reusable between device trees used with U-Boot and linux, and this is the (only) compatible string that linux' corresponding driver and DT binding accepts. I have asked whether one should/could add "wdt-gpio" to that binding, but the answer was no: https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/ If someone feels strongly about this, I can certainly remove the "linux," part from the string - it probably wouldn't the only place where one can't reuse a DT snippet as-is between linux and U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-23Merge tag 'efi-2021-10-rc3' of ↵WIP/23Aug2021Tom Rini19-33/+5
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc3 Documentation: * Rename Freescale to NXP * Document structures used for the UEFI TCG2 protocol UEFI: * Device paths must use EfiBootServicesData
2021-08-22bootcount: add a new driver with syscon as backendNandor Han1-0/+24
The driver will use a syscon regmap as backend and supports both 16 and 32 size value. The value will be stored in the CPU's endianness. Signed-off-by: Nandor Han <nandor.han@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-17doc: move doc/board/st/st.rstHeinrich Schuchardt2-1/+1
'make htmldocs' does not use file doc/board/st/st.rst because the name matches the directory name. Let's rename it to st-dt.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-17doc: rename Freescale to NXPHeinrich Schuchardt14-3/+3
Freescale Semiconductor, Inc. was merged into NXP Semiconductors in 2015. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-17doc: move i.MX7D/i.MX8MM A/B booting to board specificHeinrich Schuchardt5-29/+1
Having "i.MX7D/i.MX8MM SRC_GPR10 PERSIST_SECONDARY_BOOT for bootloader A/B switching" at the top level of the documentation tree does not make sense. Move it to board specific information. Fixes: 59e3d1bd4992 ("doc: imx: psb: Document usage of SRC_GPR10 PERSIST_SECONDARY_BOOT for A/B switching") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-16doc: st: stm32mp1: Add FIP support for trusted bootPatrick Delaunay1-96/+232
TF-A for STM32MP15 now supports the FIP: it is a packaging format which includes the secure monitor, u-boot-nodtb.bin and u-boot.dtb This FIP file is loaded by FSBL = TF-A BL2. This patch updates the board documentation to use this FIP file and no more u-boot.stm32 (with STM32 image header) which is no more generated. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-08-14doc: stm32mp1: add page for device tree bindingsPatrick Delaunay13-893/+69
With device tree binding migration to yaml it is difficult to synchronize the binding from Linux kernel to U-Boot. Instead of maintaining the same dt bindings, this patch adds in the U-Boot documentation the path to the device tree bindings in Linux kernel for STMicroelectronics devices, when they are used without modification. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Add links for referenced text files. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: Add a note about why devicetree is usedSimon Glass2-0/+42
This question comes up every now and then with people coming from Linux. Add some notes about it so we can point to it in the mailing list. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: Update devicedocs including how to add tweaksSimon Glass1-81/+100
This file is about 10 years old and the updates have not covered everything that has changed, particularly in the last few years. Update the information and add mention of the u-boot.dtsi files. Signed-off-by: Simon Glass <sjg@chromium.org> Fix typos. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: Move devicetree control doc to rSTSimon Glass4-25/+43
Move this to rST format, largely unchanged to start with. Add an index for this topic, as well as an empty intro. Note this patch does not include updates! Is it just a conversion to the new format. See the next patch. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchart <xypron.glpk@gmx.de>
2021-08-14doc: fix Latex marginsHeinrich Schuchardt1-12/+19
Adjust the Latex formatting to match Linux v5.13.1: * add Latex margins * reformat the code in doc/conf.py to match Linux Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: require Sphinx 2.4.4Heinrich Schuchardt2-98/+5
Require Sphinx 2.44 to build the documentation. Remove all code related to earlier versions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-14doc: add pkg-config to the build dependenciesHeinrich Schuchardt1-2/+2
tools/Makefile uses pkg-config. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-13doc: x86: Update SeaBIOS build instructionsBin Meng1-13/+8
Update SeaBIOS build instructions using exact command that involves "make olddefconfig", and mention SeaBIOS release 1.14.0 has been used for testing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-09Merge tag 'u-boot-imx-20210809' of ↵WIP/09Aug2021Tom Rini1-19/+8
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210809 - new SOC: add support for imx8ulp - Toradex fixes for colibri (vf / imx6 / imx7 / imx8x) - convert to DM for mx28evk - Fixes for Gateworks ventana boards CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8639
2021-08-09board: colibri-imx8x: update building documentationOleksandr Suvorov1-19/+8
Update the documentation on how to build the u-boot image for Colibri iMX8QXP, adding support of V1.0D revision of the module. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-08-06pci: Drop migration methodSimon Glass1-9/+0
Migration is complete. Drop the message. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-06ppc: Drop t4qds and b4860qds referencesSimon Glass2-454/+0
These boards have been removed. Drop the config file and other references. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-04doc: Add basic information about running CI testsTom Rini2-0/+71
Start out by documenting general expectations on when CI is run, how anyone can run Azure pipelines, and how GitLab CI pipelines can be run. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-02Merge https://source.denx.de/u-boot/custodians/u-boot-x86WIP/02Aug2021Tom Rini1-11/+2
- Fixed broken ICH SPI driver in software sequencer mode - Added "m25p,fast-read" to SPI flash node for x86 boards - Drop ROM_NEEDS_BLOBS and BUILD_ROM for x86 ROM builds - Define a default TSC timer frequency for all x86 boards - x86 MTRR MSR programming codes bug fixes - x86 "hob" command bug fixes - Don't program MTRR for DRAM for FSP1 - Move INIT_PHASE_END_FIRMWARE to FSP2 - Use external graphics card by default on Intel Crown Bay - tangier: Fix DMA controller IRQ polarity in CSRT
2021-08-02lib: Allow using 0x when a decimal value is requestedSimon Glass1-0/+6
U-Boot mostly uses hex for value input, largely because addresses are much easier to understand in hex. But in some cases a decimal value is requested, such as where the value is small or hex does not make sense in the context. In these cases it is sometimes useful to be able to provide a hex value in any case, if only to resolve any ambiguity. Add this functionality, for increased flexibility. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02doc: Add a note about number representationSimon Glass1-0/+31
Mention the default base of U-Boot in the command-line section. Add examples for decimal and octal. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02doc: Convert command-line info to rSTSimon Glass2-0/+57
Take this part of the README and put it into rST format. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02Merge tag 'efi-2021-10-rc2' of ↵Tom Rini5-29/+38
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc2 Documentation: * handle 'make htmldocs' warnings as errors * add missing board/ti/index.rst Bug fixes: * avoid buffer overrun in TrueType console * lib: disable CONFIG_SPL_HEXDUMP by default
2021-08-02x86: kconfig: Drop ROM_NEEDS_BLOBS and BUILD_ROMBin Meng1-11/+2
These 2 options are no longer needed as now binman is used to build u-boot.rom. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-01doc: add graphviz imagemagick as build dependenciesHeinrich Schuchardt1-3/+3
'make htmldocs' requires graphviz and imagemagick (at least with Sphinx 3.5.4). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-01doc: handle 'make htmldocs' warnings as errorsHeinrich Schuchardt1-1/+1
Parameter -W for sphinx-build turns build warnings into errors. This helps us to avoid bad patches passing Gitlab CI. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-01doc: add missing board/ti/index.rstHeinrich Schuchardt1-0/+9
Commit 8baeeecbe305 ("doc: board: Move j721e document to doc/board/ti/ directory") introduced 'make htmldocs' build errors due to a missing file board/ti/index.rst. Fixes: 8baeeecbe305 ("doc: board: Move j721e document to doc/board/ti/ directory") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-01doc: Fix up outdated moveconfig docsSimon Glass1-36/+22
The examples here are a bit messed up since the command does not match the documentation. Use a different example instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01doc: Add docs for the moveconfig toolSimon Glass2-0/+297
Move these docs into htmldocs so they can be read there. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01doc: Move coccinelle into its own sectionSimon Glass1-1/+8
This tool has nothing to do with testing. It is for refactoring code automatically using a 'semantic patch' tool. Create a new section for 'refactoring' and move it into there. It is likely that other topics may fall under the same heading, such as using moveconfig and search/replace tools. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-01doc: Create an intro section for testingSimon Glass2-3/+5
At present this information is hidden away. Make it more visible by putting it first, in an intro section. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-08-01doc: riscv: flashing SiFive boardsHeinrich Schuchardt2-25/+25
We should not use /dev/sda and /dev/sdb in our examples. Users might inadvertently mess up their workstation. Use /dev/sdX instead. Remove console output like '# ' and '> ' which makes copying hard. Set example language to bash for correct syntax-highlighting. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> iewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-31arm64: a37xx: pinctrl: Correct PWM pins definitionsMarek Behún1-4/+4
The PWM pins on North Bridge on Armada 37xx can be configured into PWM or GPIO functions. When in PWM function, each pin can also be configured to drive low on 0 and tri-state on 1 (LED mode). The current definitions handle this by declaring two pin groups for each pin: - group "pwmN" with functions "pwm" and "gpio" - group "ledN_od" ("od" for open drain) with functions "led" and "gpio" This is semantically incorrect. The correct definition for each pin should be one group with three functions: "pwm", "led" and "gpio". Change the "pwmN" groups to support "led" function. Remove "ledN_od" groups. This cannot break backwards compatibility with older device trees: no device tree uses it since there is no PWM driver for this SOC yet. Also "ledN_od" groups are not even documented. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-29Merge branch '2021-07-28-assorted-fixes'Tom Rini3-9/+7
- Assorted bugfixes
2021-07-29Merge tag 'ti-v2021.10-rc2' of ↵WIP/29Jul2021Tom Rini2-0/+332
https://source.denx.de/u-boot/custodians/u-boot-ti - Add MMC High speed modes for AM64 and J7200 - Add Sierra/Torrent SERDES driver - Minor clean-ups for R5F boot from SPL
2021-07-28mkimage: use environment variable MKIMAGE_SIGN_PIN to set pin for OpenSSL EngineMarc Kleine-Budde1-2/+2
This patch adds the possibility to pass the PIN the OpenSSL Engine used during signing via the environment variable MKIMAGE_SIGN_PIN. This follows the approach used during kernel module signing ("KBUILD_SIGN_PIN") or UBIFS image signing ("MKIMAGE_SIGN_PIN"). Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-07-28doc: sandbox: Fix up dependenciesSimon Glass2-7/+5
These are out of date. Update them and point to the existing build instructions to avoid duplication. Add a few that are missing. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass1-1/+1
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-13 02:37:33 +0000