aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2020-01-20MAINTAINERS: Update ARM TI entryLokesh Vutla1-1/+2
Take over TI maintainership from Tom. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-15Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMAVignesh Raghavendra1-1/+1
Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-15efi_loader: document functions in efi_rng.cHeinrich Schuchardt1-0/+6
Add the missing Sphinx documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-10rtc: add support for DS3232 deviceHan Nandor1-0/+15
DS3232 is an i2c RTC with 236 bytes of battery-backed SRAM. Add an RTC driver for DS3232 device, which provides time and date support. Also read and write functions are provided, which can be used to access the SRAM memory. Signed-off-by: Nandor Han <nandor.han@vaisala.com>
2020-01-10drivers: fsl_mcdmafec: conversion to dmAngelo Durgehello1-0/+35
Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10drivers: mcffec: conversion to dmAngelo Durgehello1-0/+22
Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-09Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini1-2/+6
- DFU updates
2020-01-07doc: uefi.rst: Document launching UEFI binaries from FIT imagesCristian Ciocaltea1-0/+34
This patch adds a new section "Launching a UEFI binary from a FIT image" documenting the usage of the CONFIG_BOOTM_EFI extension to bootm command that offers a verified boot alternative for UEFI binaries such as GRUB2. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07doc: Add sample uefi.its image description fileCristian Ciocaltea1-0/+67
This patch adds an example FIT image description file demonstrating the usage of bootm command to securely launch UEFI binaries. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07dfu: Add optional timeout parameterAndy Shevchenko1-2/+6
When the `dfu` command is called from the U-Boot environment, it now accepts an optional parameter that specifies a timeout (in seconds). If a DFU connection is not made within that time the `dfu` command exits (as it would if Ctrl+C was pressed). If the timeout is left empty or being zero the `dfu` command behaves as it does now. This is useful for allowing U-Boot to check to see if anything wants to upload new firmware before continuing to boot. The patch is based on the commit https://github.com/01org/edison-u-boot/commit/5e966ccc3c65c18c9783741fa04e0c45e021780c by Sebastien Colleur, which has been heavily reworked due to U-Boot changes in the past. Signed-off-by: Brad Campbell <bradjc5@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-06Merge branch 'next'Tom Rini6-0/+366
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2019-12-27doc: rockchip: document packing second level loader with mkimageJeffy Chen1-0/+11
Add documentation about packing optional second level boot-loader with mkimage tool. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-27doc: rockchip: Fix reference the wrong defconfig name of ROC-CC-RK3308Andy Yan1-2/+2
The defconfig file for ROC-CC-RK3308 is roc-cc-rk3308_defconfig. Fixes: 7f08bfb74f04 ("doc: rockchip: Add documentation for rk3308 based boards") Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-15x86: Add chromebook_coralSimon Glass2-0/+242
Add support for coral which is a range of Apollo Lake-based Chromebook released in 2017. This also includes reef released in 2016, since it is based on the same SoC. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15x86: Add a generic Intel GPIO driverSimon Glass1-0/+55
Add a GPIO driver which uses the pinctrl driver to access the pad information. This driver relies on the GPIO nodes being subnodes to the pinctrl device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15x86: Add a generic Intel pinctrl driverSimon Glass1-0/+39
Recent Intel SoCs share a pinctrl mechanism with many common elements. Add an implementation of this core functionality, allowing SoC-specific drivers to avoid adding common code. As well as a pinctrl driver this provides a GPIO driver based on the same code. Once other SoCs use this driver we may consider moving more properties to the device tree (e.g. the community info and pad definitions). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15dm: doc: Add a note about of-platdata and header filesSimon Glass1-0/+6
We don't want to include dt-structs.h in header files, so add a note about that. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15dm: pci: Allow delaying auto-config until after relocationSimon Glass1-0/+24
At present PCI auto-configuration happens in U-Boot both before and after relocation. This is a waste of time and may mess up static addresses used in board_init_f(). Adjust the code to supporting doing auto-configuration once, after relocation, under control of a device-tree property. This is needed for Apollo Lake for debugging the silicon-init code. Once the UART is moved to a different MMIO address the debug UART does not work and any debug output in Apollo Lake's arch_fsp_init_r() causes a hang. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-13doc: fitImage: example of a signature nodeHeinrich Schuchardt1-0/+62
Describe that a signature node can be added to a binary device tree using the mkimage tool. Provide an example device tree node. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-13doc: really get rid of Documentation/ directoryRasmus Villemoes1-7/+48
Commit 656d8da9d2 (doc: Remove duplicated documentation directory) got rid of most of Documentation/. But there's still an obviously useless .gitignore left behind. Also, there's a copy of the linux kernel's net/ethernet.txt binding imported from v5.0, while the existing one in doc/ is from 4.0-rc1. So replace the latter by the former, and making Documentation/ finally empty. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-12-09Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini2-7/+207
- Increase stack size to avoid a stack overflow during distro boot. - Add hifive-unleashed-a00.dts for SIFIVE FU540. - Add OF_SEPARATE support for SIFIVE FU540. - Add SPL support for Andes AX25 AE350. - Improve U-Boot SPL / OpenSBI smp boot flow for RISC-V.
2019-12-10doc: update AX25-AE350 RISC-V documentationRick Chen1-3/+206
Add descriptions about U-Boot SPL feature and how to build and run. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
2019-12-10Use dts support from U-Boot via OF_SEPARATE instead of depending from opensbi.Rick Chen1-4/+1
This would help to make the necessary changes in drivers and device trees in U-Boot tree itself. This feature would also be helpful to not pass dtb during opensbi builds. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Rick Chen <rick@andestech.com>
2019-12-09doc: bindings: Aquantia PHY node bindingAlex Marginean1-0/+25
A couple of optional properties have been introduced for Aquantia PHY allowing the driver to set up wiring related configuration points that are otherwise driven by firmware. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09doc: bindings: add bindings document for PHY nodesAlex Marginean1-0/+24
It defines that PHY nodes must be children on MDIO bus nodes and defines the only required property in U-Boot, reg. This property along with the example provided are copied over from Linux. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09dt-bindings: phy: dp83867: Add documentation for disabling clock outputGrygorii Strashko1-2/+4
Based on commit 980066e6d964 ("dt-bindings: phy: dp83867: Add documentation for disabling clock output") of mainline linux kernel. The clock output is generally only used for testing and development and not used to daisy-chain PHYs. It's just a source of RF noise afterward. Add a mux value for "off". I've added it as another enumeration to the output property. In the actual PHY, the mux and the output enable are independently controllable. However, it doesn't seem useful to be able to describe the mux setting when the output is disabled. Document that PHY's default setting will be left as is if the property is omitted. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-12-09net: Always build the string_to_enetaddr() helperJoe Hershberger1-2/+2
Part of the env cleanup moved this out of the environment code and into the net code. However, this helper is sometimes needed even when the net stack isn't included. Move the helper to lib/net_utils.c like it's similarly-purposed string_to_ip(). Also rename the moved function to similar naming. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Ondrej Jirman <megous@megous.com>
2019-12-06doc: add README for asn1 compiler and decoderAKASHI Takahiro1-0/+40
This document gives a brief description about ASN1 compiler as well as ASN1 decoder. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-05doc: rockchip: Update build instruction for rk3308Andy Yan1-1/+0
After commit d8765e2422cd ("Enable building of u-boot.itb on Rockchip platform"), u-boot.itb will automatically generated by "make all" command, manually command "make u-boot.itb" is no longer needed. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-03bootm: vxworks: Support Linux compatible standard DTB for ARM and PPCLihua Zhao1-0/+13
Enhance do_bootm_vxworks() to support Linux compatible standard DTB for ARM and PPC, when the least significant bit of flags in VxWorks bootargs is set. Otherwise it falls back to the existing bootm flow which is now legacy. Signed-off-by: Lihua Zhao <lihua.zhao@windriver.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-03cosmetic: Fix spelling and whitespace errorsThomas Hebb3-3/+3
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-11-17doc: rockchip: Add documentation for rk3308 based boardsAndy Yan1-1/+91
Add build documentation for rk3308 based boards. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-11Merge tag 'u-boot-rockchip-20191110' of ↵Tom Rini1-0/+27
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 - Fix the u8 type comparision with '-1'. - Fix checkpatch warning for multi blank line and review signature.
2019-11-10dm: regulator: support regulator more stateJoseph Chen1-0/+27
support parse regulator standard property: regulator-off-in-suspend; regulator-init-microvolt; regulator-suspend-microvolt: regulator_get_suspend_enable regulator_set_suspend_enable regulator_get_suspend_value regulator_set_suspend_value Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-08freescale/powerpc: Rename the config CONFIG_SECURE_BOOT nameUdit Agarwal1-4/+4
Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid conflicts with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-06Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini1-0/+270
- DFU updates - USB Storage updates
2019-11-03dm: doc: Correct of-platdata driver nameSimon Glass1-1/+1
Add a note about the driver name in the of-platdata documentation since the naming must follow the compatible string. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-31cmd: avb: Support A/B slotsSam Protsenko1-0/+4
Add optional parameter to 'avb verify' sub-command, so that user is able to specify which slot to use, in case when user's partitions are slotted. If that parameter is omitted, the behavior of 'avb verify' will be the same as before, so user API is content. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com> Acked-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-10-31dfu: add callback for flush and initiated operationPatrick Delaunay1-0/+8
Add weak callback to allow board specific behavior - flush - initiated This patch prepare usage of DFU back end for communication with STM32CubeProgrammer on stm32mp1 platform with stm32prog command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31dfu: add DFU virtual backendPatrick Delaunay1-1/+31
Add a virtual DFU backend to allow board specific read and write (for OTP update for example). Acked-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31dfu: add partition support for MTD backendPatrick Delaunay1-0/+21
Add the support of MTD partition for the MTD backend. The expected dfu_alt_info for one alternate on the mtd device : <name> part <part_id> <name> partubi <part_id> "partubi" also erase up to the end of the partition after write operation. For example: dfu_alt_info = "spl part 1;u-boot part 2; UBI partubi 3" U-Boot> dfu 0 mtd nand0 Acked-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31dfu: add backend for MTD devicePatrick Delaunay1-0/+10
Add DFU backend for MTD device: allow to read and write on all MTD device (NAND, SPI-NOR, SPI-NAND,...) For example : > set dfu_alt_info "nand_raw raw 0x0 0x100000" > dfu 0 mtd nand0 This MTD backend provides the same level than dfu nand backend for NAND and dfu sf backend for SPI-NOR; So it can replace booth of them but it also add support of spi-nand. > set dfu_alt_info "nand_raw raw 0x0 0x100000" > dfu 0 mtd spi-nand0 The backend code is based on the "mtd" command introduced by commit 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31dfu: allow to manage DFU on several devicesPatrick Delaunay1-3/+55
Add support of DFU for several interface/device with one command. The format for "dfu_alt_info" in this case is : - <interface> <dev>'='alternate list (';' separated) - each interface is separated by '&' The previous behavior is always supported. One example for NOR (bootloaders) + NAND (rootfs in UBI): U-Boot> env set dfu_alt_info \ "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \ u-boot-env part 0 3&nand 0=UBI partubi 0,3" U-Boot> dfu 0 list DFU alt settings list: dev: SF alt: 0 name: spl layout: RAW_ADDR dev: SF alt: 1 name: ssbl layout: RAW_ADDR dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR dev: NAND alt: 3 name: UBI layout: RAW_ADDR U-Boot> dfu 0 $> dfu-util -l Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=3, name="UBI", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=1, name="u-boot", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=0, name="spl", serial="002700333338511934383330" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31dfu: sf: add partition support for nor backendPatrick Delaunay1-0/+5
Copy the partition support from NAND backend to SF, support part and partubi option. In case of ubi partition, erase the rest of the partition as it is mandatory for UBI. The added code is under compilation flag CONFIG_DFU_SF_PART activated by default. for example: U-Boot> env set dfu_alt_info "spl part 0 1;\ u-boot part 0 2;u-boot-env part 0 3;UBI partubi 0 4" U-Boot> dfu 0 sf 0:0:10000000:0 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-31doc: dfu: Add dfu documentationPatrick Delaunay1-0/+144
Add documentation for dfu stack and "dfu" command. Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-10-30Merge branch '2019-10-28-azure-ci-support'Tom Rini3-0/+67
- Clean up Travis-CI slightly and then add support for Microsoft Azure pipelines, all from Bin Meng.
2019-10-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini1-4/+4
- H6 dts(i) sync (Clément) - H6 PIO (Icenowy) - Fix pll1 clock calculation (Stefan) - H6 dram, half DQ (Jernej) - A64 OLinuXino eMMC (Sunil)
2019-10-28doc: Add documentation for how to build U-Boot host toolsBin Meng3-0/+67
This adds a reST document for how to build U-Boot host tools, including information for both Linux and Windows. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-25dt-bindings: memory-controller: Introduce J721E DDRSS bindingsLokesh Vutla1-0/+2241
Add DT binding documentation for DDR sub system present on J721E device. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-25dm: spi: Change cs_info op to return -EINVAL for invalid cs numBin Meng1-2/+2
We need distinguish the following two situations in various SPI APIs: - given chip select num is invalid - given chip select num is valid, but no device is attached Currently -ENODEV is returned for both cases. For the first case, it's more reasonable to return -EINVAL instead of -ENODEV for invalid chip select numbers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # SoPine Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.1 at 2024-11-10 16:33:40 +0000