aboutsummaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2021-12-28Merge tag 'efi-2022-01-rc4-4' of ↵WIP/28Dec2021Tom Rini1-3/+3
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc4-4 UEFI: * allow for more than 16 KiB UEFI variable size when using StMM Others: * make watchdog sysreset compatible with separate poweroff driver * avoid OpenSSL deprecation warnings
2021-12-27doc: Fix usage of CFG_RPMB_WRITE_KEYIlias Apalodimas1-3/+3
This is a 'y/n' selection, so fix it. While at it remove the duplicate usage of CFG_CORE_HEAP_SIZE Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-24doc: rockchip: puma: update build and flash instructionsQuentin Schulz1-19/+8
Long gone is the time a custom TF-A was needed for Puma, upstream TF-A works just fine now. The flashing instructions are updated to match how newer rkdeveloptool and rkbin work. Finally, rkbin provides a way to flash SPI via USB OTG interface so let's document that. Cc: Quentin Schulz <foss+u-boot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-12-18doc: board: Add Calxeda Highbank/Midway documentationAndre Przywara3-0/+88
The Calxeda servers are using U-Boot as the primary bootloader, which was shipped as part of a firmware upgrade package. Even though the machines are considered legacy at this point, the port still works, so deserves some documentation. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-09efi: Rename UCLASS_EFI and IF_TYPE_EFISimon Glass1-4/+4
These names are better used for access to devices provided by an EFI layer. Use EFI_LOADER instead here, since these are only available in U-Boot's EFI_LOADER layer. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09doc: usage: Fix command in fdt overlay apply sequenceAlexander Dahl1-1/+1
Literally adhering to the docs gave this wrong output: U-Boot> setenv fdtaddr 0x87f00000 U-Boot> fdtaddr $fdtaddr Unknown command 'fdtaddr' - try 'help' Fixes: d80162cfc559 ("doc: Document how to apply fdt overlays") Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-02riscv: Support booting SiFive Unmatched from SPI.Thomas Skibo1-0/+31
Configure SPI flash devices into SPL. Add SPI boot option to spl.c. Document how to format flash for booting. Signed-off-by: Thomas Skibo <thomas-git@skibo.net> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02doc: board: Update Microchip MPFS Icicle Kit docPadmarao Begari1-2/+5
UART1 use for U-Boot and Linux console instead of UART0 and UART0 is reserved for Hart Software Services(HSS). Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-30doc: qemu-arm peripherialsHeinrich Schuchardt1-2/+7
* add description how to add RNG device * for a disk specify format=raw to avoid a warning * fix a typo Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-29board: iot2050: update build documentation for OP-TEEIvan Mikhaylov1-1/+1
Set ta-target explicitly to correspond with OP-TEE recipe in siemens/meta-iot2050. Errors without explicit set of ta-target: aarch64-linux-gnu-gcc: error: unrecognized command-line option ‘-mthumb’ aarch64-linux-gnu-gcc: error: unrecognized command-line option ‘-mno-unaligned-access’ aarch64-linux-gnu-gcc: error: unrecognized command-line option ‘-mfloat-abi=hard’ make: *** [mk/compile.mk:159: out/arm-plat-k3/ta_arm32-lib/libdl/dlfcn.o] Error 1 Signed-off-by: Ivan Mikhaylov <ivan.mikhaylov@siemens.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-11-20doc: fix typos in trace.rstHeinrich Schuchardt1-8/+8
Fix obvious typos. Use US spelling consistently. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-20doc: add include/lmb.h to the HTML documentationHeinrich Schuchardt2-0/+8
Correct Sphinx style comments in include/lmb.h Add the logical memory block API to the HTML documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-15usb: doc: Fix spelling issues in README.usbAndy Shevchenko1-12/+11
Fix spelling issues in README.usb. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-11-13Merge tag 'efi-2022-01-rc2-2' of ↵Tom Rini1-0/+25
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc2-2 UEFI: * fix measurement of BootOrder variable for TCG2 protocol TPM: * TIS mmio driver. This driver supports QEMU's emulated TPM.
2021-11-11Remove LYNX KDI remaindersThomas Huth1-57/+0
The last board that used to set CONFIG_LYNXKDI has been removed in commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support"), doc/README.lynxkdi only talks about a MPC8260 board being supported, and the mpc8260 support has been removed four years ago in commit 2eb48ff7a210d ("powerpc, 8260: remove support for mpc8260") already, and common/lynxkdi.c only consists of an "#error" statement these days, so it seems like the LYNX KDI code is dead code nowadays. Let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-11-11doc: Move distro boot doc to rSTSimon Glass2-98/+80
Move this over to the new rST format. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11Create a new boot/ directorySimon Glass1-1/+1
Quite a lot of the code in common/relates to booting and images. Before adding more it seems like a good time to move the code into its own directory. Most files with 'boot' or 'image' in them are moved, except: - autoboot.c which relates to U-Boot automatically running a script - bootstage.c which relates to U-Boot timing Drop the removal of boot* files from the output directory, since this interfers with the symlinks created by tools and there does not appear to be any such file from my brief testing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-10doc: qemu: Add instructions for swtpm usageIlias Apalodimas1-0/+25
A previous patch added support for an mmio based TPM. Add an example in QEMU on it's usage Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-09board: sl28: add update image documentationMichael Walle1-0/+15
Document the update image and how to use the EFI UpdateCapsule. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09doc: board: kontron: sl28: Reduce section levels and change titleFrieder Schrempf1-15/+15
In order to add other Kontron boards to the docs alongside the existing sl28 board, we need to reduce the levels of the sections and change the title. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-07efi: Add video support to the appSimon Glass1-1/+1
The current EFI video driver only works when running in the stub. In that case the stub calls boot services (before jumping to U-Boot proper) and copies the graphics info over to the efi table. This is necessary because the stub exits boot services before jumping to U-Boot. The app maintains access to boot services throughout its life, so does not need to do this. Update the driver to support calling boot services directly. Enable video output for the app. Note that this uses the EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa. A sample qemu command-line for this case is: qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd -drive id=disk,file=try.img,if=none,format=raw -nic none -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi: Create a 64-bit appSimon Glass1-3/+3
Most modern platforms use 64-bit EFI so it is useful to have a U-Boot app that runs under that. Add a (non-functional) build for this. Note that --whole-archive causes the gcc 9.2 linker to crash, so disable this for now. Once this is resolved, things should work. For now, avoid mentioning the documentation for the 64-bit app, since it does not work. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi: Add a script to build an image for testing on UEFISimon Glass1-0/+62
It is quite complicated to run U-Boot on QEMU since we have four different builds and they must use different versions of qemu and the UEFI binaries. Add a script to help. It requires U-Boot itself to be built. Once that is done you can use this script to build an image for use with qemu and optionally run it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-11-07doc: mmc rescan speed modeHeinrich Schuchardt1-16/+20
Provide human readable descriptions of the speed nodes instead of the name of constants from the code. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-07doc: Remove the obsolete README.AMCC-eval-boards-cleanup fileThomas Huth1-31/+0
The related boards have been removed four years ago already, in commit 98f705c9cefd ("powerpc: remove 4xx support"), so this README file is not required anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-07doc: Remove obsolete doc/README.nand-boot-ppc440Stefan Roese1-60/+0
The PPC440 support has been removed in commit 98f705c9ce ("powerpc: remove 4xx support"). This patch removes this obsolete file as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2021-11-01docs: uefi: Update stale U-Boot on EFI docBin Meng1-5/+7
The existing intructions in the U-Boot on EFI doc do not work with the latest QEMU. Update the doc with the correct instructions, as well as using the new OVMF URL link. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-10-31board: samsung: add support for Galaxy A series of 2017 (a5y17lte)Dzmitry Sankouski3-0/+104
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones. U-boot can be used as chain-loaded bootloader to gain control on booting vanilla linux(and possibly others) kernels Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) boardDzmitry Sankouski2-0/+39
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31serial: qcom: add support for GENI serial driverDzmitry Sankouski1-0/+6
Generic Interface (GENI) Serial Engine (SE) based uart can be found on newer qualcomm SOCs, starting from SDM845. Tested on Samsung SM-G9600(starqltechn) by chain-loading u-boot with stock bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31doc: board: apple: Add Apple M1 documentationMark Kettenis3-0/+69
Provide preliminary instructions on how to get U-Boot to run on Apple Silicon Macs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31iommu: Add IOMMU uclassMark Kettenis1-0/+206
This uclass is intended to manage IOMMUs on systems where the IOMMUs are not in bypass mode by default. In that case U-Boot cannot ignore the IOMMUs if it wants to use devices that need to do DMA and sit behind such an IOMMU. This initial IOMMU uclass implementation does not implement and device ops and is intended for IOMMUs that have a bypass mode that does not require address translation. Support for IOMMUs that do require address translation is planned and device ops will be defined when support for such IOMMUs will be added. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-27sandbox: Remove OF_HOSTFILEWIP/27Oct2021Ilias Apalodimas1-4/+3
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-25Revert "Revert "doc: Update CapsuleUpdate READMEs""AKASHI Takahiro1-0/+124
This reverts commit a7e4f905d206d5895dab4bd38a8316e4f2fe15fe. The description originally written by Sughosh is still valid even after the commit 47a25e81d35c ("Revert "efi_capsule: Move signature from DTB to .rodata"") was applied. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2021-10-25doc: Remove the obsolete README.mpc74xx fileThomas Huth1-22/+0
Support for the PPC74xx processors has been removed in commit d928664f41 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support") more than 6 years ago already. So the corresponding README file can now be removed, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-25doc: remove AMCC PPC405 processor referencesHeinrich Schuchardt1-22/+0
Support for PPC4XX processors has been removed. So we should not mention it in the documentation. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2021-10-25Merge tag 'u-boot-imx-20211022' of ↵Tom Rini3-32/+40
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211022 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561 - i.MX8: - Toradex Verdin (switch to binman, cleanup, etc.) - Phytec phycore_imx8mm (fixes, boot from SPI-NOR) - fixes for imx8mp_evk - doc (i.MX): MX8MM with Fast boot - i.MX6: - Toradex : colibri-imx6ull with eMMC, fixes - i.MX7ULP : - preparation for OPTEE + Serial Number - generic: - imx8m_image: Support ddr3 firmware
2021-10-22Merge tag 'efi-2022-01-rc1' of ↵Tom Rini5-94/+12
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1 Documentation: Use Sphinx 3.43. Move system reset documentation to HTML UEFI: Fix linking EFI apps with LLVM Fix alignment of loaded image Correct simple network protocol test Code cleanup
2021-10-21Merge branch 'master' of git://git.denx.de/u-bootStefano Babic10-72/+446
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21doc: Remove obsolete README.440-DDR-performance fileThomas Huth1-90/+0
The PPC 440 support has been removed in commit 98f705c9cefd ("powerpc: remove 4xx support") already, so this file is certainly not required anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21doc: add python3-pkg-resources to build dependenciesHeinrich Schuchardt1-3/+3
tools/binman/control.py imports Python package pkg_resources. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21doc: add system reset to API documentationHeinrich Schuchardt2-0/+8
Complete the Sphinx documentation in include/sysreset.h Add the include to the generated HTML documentation of the U-Boot API. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-21doc: require Sphinx 3.4.3Heinrich Schuchardt1-1/+1
For enums documented according to the requirements in chapter "Structure, union, and enumeration documentation" of https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html errors occur with Sphinx 2.4.4 which disappear with Sphinx 3.4.3, e.g. /builds/u-boot/custodians/u-boot-efi/doc/api/sysreset:6: ./include/sysreset.h:60:Unknown interpreted text role "enum". Sphinx 3.4.3 is the version used by Debian in the current release. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-10-20Merge tag 'u-boot-imx-20211020' of ↵WIP/20Oct2021Tom Rini4-1/+130
https://source.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211020 ------------------- First PR from u-boot-imx for 2022.01 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535 - new board: kontron-sl-mx8mm - imx8m: - fix secure boot - imx ESDHC: fixes - i.MX53: Support thum2, bmode and fixes for Menlo board usbarmory switch to Ethernet driver model - imx6 : - DDR calibration for Toradex boards - imx7: - Fixes - Updated gateworks boards (ventana / venice) # gpg verification failed.
2021-10-20doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blownMarek Vasut1-7/+9
On iMX8MM with Fast Boot fuse blown, the SIT and A-copy image are placed at different offset than on iMX8MM with Fast Boot fuse NOT blown. List both options and both offsets to avoid confusion. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10Marek Vasut1-1/+1
The PERSIST_SECONDARY_BOOT is in GPR10 address 0x30390098, adjust the text which currently says it is in GPR0 while using the correct address of GPR10. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20imx8mm-evk: Generate a single bootable flash.bin againFabio Estevam1-1/+0
After the conversion to binman in commit 8996e6b7c6a1 ("imx8mm_evk: switch to use binman to pack images"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed. Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required. Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior. After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes). Also update imx8mm_evk.rst to remove the u-boot.itb copy step. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-20verdin-imx8mm: switch to use binman to pack imagesMarcel Ziswiler1-23/+30
Use binman to pack images. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-19drivers/gpio: add support for MAX7320 i2c i/o expanderHannes Schmelzer1-0/+36
This commit adds support for the MAX7320 (and clones) gpio expander. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2021-10-19Makefile: Only build dtc if neededSimon Glass1-0/+21
At present U-Boot always builds dtc if CONFIG_OF_CONTROL is defined, even when DTC is provided. The built dtc is not actually used, so this is a waste of time. Update the Makefile logic to build dtc only if one is not provided to the build with the DTC variable. Add documentation to explain this. This saves about 3.5 seconds of elapsed time on a clean build of sandbox_spl for me. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-13 14:09:54 +0000