aboutsummaryrefslogtreecommitdiff
path: root/doc/board
AgeCommit message (Collapse)AuthorFilesLines
2023-09-21Merge tag 'xilinx-for-v2024.01-rc1-v2' of ↵WIP/21Sep2023-nextTom Rini2-3/+3
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2024.01-rc1 clk: - Dont return error when assigned-clocks is empty or missing dm: - Support reading a single indexed u64 value - Add support for reading bootscript address/flash address from DT cmd: - Fix flash_is_unlocked API fpga: - Define fpga_load() for debug build global: - U-Boot project name cleanup (next2) net: - zynq_gem: Use generic_phy_valid() helper - axienet: Convert to ofnode functions - gmii2rgmii: Read bridge address from DT pytest: - skip tpm2_startup when env__tpm_device_test_skip=True spi-nor: - Add mx25u25635f support - zynqmp_qspi: Tune cache behavior trace: - Fix flyrecord alignment issue xilinx: - Move scriptaddr to DT as bootscr-address - Pick script_offset_f/script_size_f from DT as bootscr-flash-offset/size - Do not generate distro boot variables if disabled versal: - Extend memory ranges to cover HBM - Enable TPM, sha1sum and KASLRSEED - Fix distroboot prioritization in connection to available devices - Clean mini targets bootcommand - Fix clock driver versal-net: - Enable TPM, sha1sum and KASLRSEED - Fix distroboot prioritization in connection to available devices zynqmp; - Allow AES to run from SPL - Enable CMD_KASLRSEED - Add proper dependencies for USB and remove ZYNQMP_USB - Fix user si570 default frequency for zcu* boards - Cover SOM rev2 revision - Various DT changes - Add firmware and pinctrl support for tristate configuration (high impedance/output enable) - Add output-enable pins to SOMs - Fix distroboot prioritization in connection to available devices - Read bootscript address/flash address from DT - Fix pcap_prog address
2023-09-21global: Use proper project name U-Boot (next2)Michal Simek2-3/+3
Use proper project name in README, rst and comment. Done in connection to commit bb922ca3eb4b ("global: Use proper project name U-Boot (next)"). Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexander Graf <graf@csgraf.de> (ppce500) Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/536af05e7061982f15b668e87f941cdabfa25392.1694157084.git.michal.simek@amd.com
2023-09-20riscv: dts: starfive: generate u-boot-spl.bin.normal.outHeinrich Schuchardt1-12/+2
The StarFive VisionFive 2 board cannot load spl/u-boot-spl.bin but needs a prefixed header. We have referring to a vendor tool (spl_tool) for this task. 'mkimage -T sfspl' can generate the prefixed file. Use binman to invoke mkimage for the generation of file spl/u-boot-spl.bin.normal.out. Update the documentation. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Tested-by: Milan P. Stanić <mps@arvanta.net>
2023-09-08doc: board: ti: Add BeaglePlay documentationNishanth Menon3-0/+1020
Add base documentation for BeaglePlay Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-09-04Merge tag 'v2023.10-rc4' into nextTom Rini12-134/+220
Prepare v2023.10-rc4
2023-09-02doc: board: ti: am64x: Fix build step numberingNishanth Menon1-2/+2
Fix up build step numbering. Fixes: 4bf49bade124 ("doc: board: ti: am64: Add boot flow diagram") Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-09-02doc: board: ti: am64x: provide image alt textNishanth Menon1-0/+3
Provide alternative text for image. Fixes: 4bf49bade124 ("doc: board: ti: am64: Add boot flow diagram") Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-09-02doc: board: toradex: verdin-am62: document update u-boot wrapperMarcel Ziswiler1-0/+14
Now with the update U-Boot wrappers having been sorted out, document their usage. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-09-02doc: board: toradex: minor documentation updateMarcel Ziswiler6-46/+71
- Update SPDX-License-Identifier from obsolete GPL-2.0+ to GPL-2.0-or-later. - Add links to product websites of SoM and carrier board where missing. - Add information about update U-Boot wrapper where missing. - Add sectionauthor where missing. - Update information about imx-seco from version 3.7.4 to 3.8.1. - Various minor grammatic and spelling fixes. - Improve whitespace by adding or removing new lines. - Change from code-block for output to just Output::. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-08-27doc: board: ti: k3: Convert to sphinx-promptNishanth Menon1-55/+57
Sphinx-prompt provides a handy scheme to provide documentation that renders nicely and yet provides a scheme to copy paste for users without having to hand-edit the copied text as is the result of code-block [1] https://lore.kernel.org/all/87fs48rgto.fsf@baylibre.com/ Reported-by: Simon Glass <sjg@chromium.org> Suggested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-27doc: board: sdm845: Explicitly add boot.img flashing commandSumit Garg1-3/+8
Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Use code-block. Fix length of two heading underlines. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-24doc: qemu: arm: Add a section on booting Linux distrosWIP/2023-08-24-enable-more-features-in-qemu-armAlper Nebi Yasak1-0/+68
Add an example qemu-system-aarch64 command that can make U-Boot on QEMU boot into the Debian Installer, along with resulting console messages from U-Boot, based on the existing documentation section for the x86 version. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-08-24arm: qemu: Enable usb keyboard as an input deviceAlper Nebi Yasak1-0/+4
Commit 02be57caf730 ("riscv: qemu: Enable usb keyboard as an input device") adds PCI xHCI support to QEMU RISC-V virtual machines and enables using a USB keyboard as one of the input devices. Similarly, enable those for ARM virtual machines as well. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng@tinylab.org>
2023-08-24arm: qemu: Enable Bochs video supportAlper Nebi Yasak1-0/+4
Commit 716161663ec49 ("riscv: qemu: Enable Bochs video support") enables a video console for QEMU RISC-V virtual machines using an emulated Bochs VGA card. Similarly, enable it for ARM virtual machines as well. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Bin Meng <bmeng@tinylab.org>
2023-08-23doc: board: ti: k3: Fix up OpenOCD references and debug infoJonathan Humphreys1-3/+3
Fix minor path and config macro name updates to sync with latest OpenOCD and U-Boot configurations. Fixes: effe50854a69 ("doc: board: ti: k3: Add a guide to debugging with OpenOCD") Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-23doc: board: ti: k3: Elaborate on various firmwareNishanth Menon1-1/+20
Add elaboration text for the various firmware involved for system management. Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-23doc: board: ti: j721e: Fix build step numberingNishanth Menon1-8/+8
Fix up build step numbering. Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions") Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-23doc: board: ti: j7200: Fix build step numberingNishanth Menon1-8/+8
Fix up build step numbering. Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions") Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-23doc: board: ti: am65x: Fix build step numberingNishanth Menon1-6/+6
Fix up build step numbering. Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions") Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-23doc: board: ti: am62x: Fix build step numberingNishanth Menon1-2/+2
Fix up build step numbering. Fixes: c727b81d6530 ("doc: board: ti: k3: Reuse build instructions") Signed-off-by: Nishanth Menon <nm@ti.com> Revieed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-23doc: board: ti: j721e: provide image alt textNishanth Menon1-0/+5
Provide alternative text for image. Fixes: 3b83dff183b5 ("doc: board: ti: j721e: Convert the image format to svg") Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-23doc: board: ti: j7200: provide image alt textNishanth Menon1-2/+5
Provide alternative text for image. Fixes: f4ade09a1e76 ("doc: board: ti: j7200: Convert the image format to svg") Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-23doc: board: ti: am65x: provide image alt textHeinrich Schuchardt1-0/+6
Provide alternative text for image. Fixes: fd358121bdb8 ("doc: board: ti: am65x: Update with boot flow diagram") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-23doc: board: ti: am62x: provide image alt textsHeinrich Schuchardt1-0/+3
Provide alternative texts for images. Fixes: 34f76921d801 ("doc: board: ti: am62x: Convert the image format to svg") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-23doc: board: ti: k3: Fixup alt text for openocd sequenceNishanth Menon1-0/+1
Fix up OpenOCD setup sequence Fixes: effe50854a69 ("doc: board: ti: k3: Add a guide to debugging with OpenOCD") Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-23doc: board: ti: k3: image alt textsHeinrich Schuchardt1-0/+3
Provide alternative texts for images. Fixes: 6e8fa0611f19 ("board: ti: k3: Convert boot flow ascii flow to svg") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-21Merge tag 'v2023.10-rc3' into nextTom Rini22-134/+1961
Prepare v2023.10-rc3 Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-18rockchip: rk3566-anbernic-rgxx3: Rename defconfig to include SoC nameJonas Karlman1-1/+1
Rename defconfig to include SoC name, use similar pattern as other RK356x boards: <soc>-<name>.dts -> <name>-<soc>_defconfig Suggested-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-18Merge tag 'tegra-for-2023.10-rc1' of ↵WIP/18Aug2023Tom Rini8-0/+423
https://source.denx.de/u-boot/custodians/u-boot-tegra ARM: tegra: Changes for v2023.10-rc1 This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.
2023-08-17doc: board: ti: am64: Add boot flow diagramRoger Quadros3-0/+1900
Add documenatation and boot flow diagram for AM64 EVM/SoC. Suggested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon <nm@ti.com> #SK-AM64B
2023-08-17doc: rockchip: Add supported RK3566/RK3568 boardsJonas Karlman1-8/+12
Update Rockchip documentation to include RK3566/RK3568 boards already supported. Also list Pine64 boards under RK3566 and drop defconfig to match other listed boards. Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2023-08-17CI: x86: coreboot: Update to latest corebootSimon Glass1-0/+20
Use a recent coreboot build for this test. The coreboot commit is: 6f5ead14b4 mb/google/nissa/var/joxer: Update eMMC DLL settings This is build with default settings, i.e. QEMU x86 i440fx/piix4 Add some documentation as to how to update it next time. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-08-12rockchip: rk3568: Add EmbedFire Lubancat 2 supportAndy Yan1-0/+1
LubanCat2 is a rk3568 based SBC from EmbedFire. Specification: - Rockchip rk3568 - LPDDR4/4X 1/2/4/8 GB - TF scard slot - eMMC 8/32/64/128 GB - Gigabit ethernet x 2 - HDMI out - USB 2.0 Host x 1 - USB 2.0 Type-C OTG x 1 - USB 3.0 Host x 1 - Mini PCIE interface for WIFI/BT module - M.2 key for 2280 NVME - 40 pin header The dts file is sync from linux mainline. Signed-off-by: Andy Yan <andyshrk@163.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-08-09Merge tag 'x86-pull-20230809' of ↵WIP/09Aug2023Tom Rini2-4/+118
https://source.denx.de/u-boot/custodians/u-boot-x86 - x86: Fixes for distro booting - x86: Move some boards to text environment
2023-08-09x86: Update qemu documentationSimon Glass1-4/+84
Add some hints and observations related to booting distros on QEMU on x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09x86: coreboot: Update doc for CBFS accessSimon Glass1-0/+34
Add an example to show how cbfs is used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [Removed CONFIG_CMD_CBFS from defconfig files] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2023-08-09doc: imx8mp_evk: Use in-tree build in the exampleFabio Estevam1-7/+9
To make it consistent with the instructions from other NXP imx8m boards, such as imx8mm-evk and imx8mn-evk, use U-Boot in-tree build in the examples. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-09doc: imx8mp_evk: Remove unneeded export ATF_LOAD_ADDR lineFabio Estevam1-1/+0
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has been used to generate the flash.bin, it is no longer needed to do such manual export. The ATF address is now passed via binman in imx8mp-u-boot.dtsi: atf { description = "ARM Trusted Firmware"; type = "firmware"; arch = "arm64"; compression = "none"; load = <0x970000>; entry = <0x970000>; atf_blob: atf-blob { filename = "bl31.bin"; type = "atf-bl31"; }; }; Remove the unneeded export ATF_LOAD_ADDR line. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-08-09doc: ti: Explain how the various gadget devices can be usedMiquel Raynal1-0/+62
Describe the current situation wrt the handling of USB devices on AM33xx based boards, taking the example of a common board (the Beagle Bone Black) and explaining how the different USB gadgets can be used. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-08-09doc: board: toradex: fix verdin module outputMarcel Ziswiler3-115/+127
Fix the Verdin module output which was missing white space for correct rendering. While at it also leave product links, add section author also for the Verdin iMX8M Mini and Plus, and add a missing CROSS_COMPILE export for the Verdin iMX8M Mini. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Nishanth Menon <nm@ti.com> #verdin-am62 Reviewed-by: Tom Rini <trini@konsulko.com>
2023-08-09doc: board: ti: k3: Add a guide to debugging with OpenOCDJason Kacines6-0/+1190
Bootloader debug usually tends to be a bit dicey prior to DDR and serial port getting active in the system. JTAG typically remains the only practical debug option during the initial bringup. OpenOCD is one of the most popular environment for providing debug capability via a GDB compatible interface for developers to work with. Debugging U-Boot and bootloaders on K3 platform does have a bit of tribal knowledge that is better documented in our common platform documentation. Signed-off-by: Jason Kacines <j-kacines@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-04board: toradex: add verdin am62 supportMarcel Ziswiler4-8/+140
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT V1.0A module and subsequent V1.1 launch configuration SKUs. They are strapped to boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, DFU support is disabled for now due to missing AM62x USB support. The device trees were taken straight from Linux v6.5-rc1. Boot sequence is: SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img) Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Nishanth Menon <nm@ti.com>
2023-08-03doc: describe QEMU virtio block deviceHeinrich Schuchardt1-2/+12
Enhance the description of QEMU block devices * Describe how to attach a virtio-blk device. * Sort the command lines for MMC to match the other devices. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-03doc: board: ti: Add SPDX License to svg imagesNishanth Menon16-0/+64
Add Licensing to svg images to clarify the terms. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-08-02riscv: qemu: Enable usb keyboard as an input deviceBin Meng1-0/+5
This brings PCI xHCI support to QEMU RISC-V and uses a usb keyboard as one of the input devices. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-02riscv: qemu: Enable Bochs video supportBin Meng1-0/+5
Enable video console using the emulated Bochs VGA card. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-07-31board: rockchip: Add Radxa E25 Carrier BoardJonas Karlman1-0/+1
Radxa E25 is a network application carrier board for the Radxa CM3I SoM with a RK3568 SoC. It features dual 2.5G ethernet, mini PCIe, M.2 B Key, USB3, eMMC, SD, nano SIM card slot and a 26-pin GPIO header. Features tested on a Radxa E25 v1.4: - SD-card boot - eMMC boot - USB host - PCIe/Ethernet adapters is detected - SATA Device tree is imported from linux next-20230728. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: FUKAUMI Naoki <naoki@radxa.com>
2023-07-31board: rockchip: add Radxa ROCK5A Rk3588 boardEugen Hristev1-0/+1
ROCK 5A is a Rockchip RK3588S based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specifications: Rockchip Rk3588S SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector 4-lane MIPI DSI connector Audio – 3.5mm earphone jack eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x micro HDMI 2.1 ports, one up to 8Kp60, the other up to 4Kp60 Gigabit Ethernet RJ45 with optional PoE support 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 56mm (Raspberry Pi 4 form factor) Kernel commits: d1824cf95799 ("arm64: dts: rockchip: Add rock-5a board") 991f136c9f8d ("arm64: dts: rockchip: Update sdhci alias for rock-5a") 304c8a759953 ("arm64: dts: rockchip: Remove empty line from rock-5a") cda0c2ea65a0 ("arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31doc: rockchip: Update SPI flashing instructionJonas Karlman1-21/+5
Update documentation on how to write a bootable u-boot-rockchip-spi.bin image into SPI flash. This removes the reference to a hardcoded and now obsolete 0x60000 payload offset. Also remove an obsolete reference to pad_cat. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <foss+u-boot@0leil.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-07-31board: rockchip: Add Pine64 SOQuartz on CM4-IOJonas Karlman1-0/+1
The Pine64 SOQuartz compute module is mostly pin-compatible with the RPi CM4 form factor. Therefore, it can slot into the official Raspberry Pi CM4 IO carrier board. Add this configuration to U-Boot. Features tested with a SOQuartz 4GB v1.1 2022-07-11: - SD-card boot - eMMC boot - USB host Device tree is imported from linux v6.4. Co-developed-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.1 at 2024-09-08 21:27:18 +0000