aboutsummaryrefslogtreecommitdiff
path: root/doc/board/index.rst
AgeCommit message (Collapse)AuthorFilesLines
2024-03-13board: rockchip: add Theobroma-Systems RK3588 Jaguar SBCQuentin Schulz1-0/+1
JAGUAR is a Single-Board Computer (SBC) based around the rk3588 SoC and is targeting Autonomous Mobile Robots (AMR). It features: * LPDDR4X (up to 16GB) * 1Gbps Ethernet on RJ45 connector (KSZ9031 or KSZ9131) * PCIe 3.0 4-lane on M.2 M-key connector * PCIe 2.1 1-lane on M.2 E-key * USB 2.0 on M.2 E-key * 2x USB3 OTG type-c ports with DP Alt-Mode * USB2 host port * HDMI output * 2x camera connectors, each exposing: * 2-lane MIPI-CSI * 1v2, 1v8, 2v8 power rails * I2C bus * GPIOs * PPS input * CAN * RS485 UART * FAN connector * SD card slot * eMMC (up to 256GB) * RTC backup battery * Companion microcontroller * ISL1208 RTC emulation * AMC6821 PWM emulation * On/off buzzer control * Secure Element * 80-pin Mezzanine connector for daughterboards: * GPIOs * 1Gbps Ethernet * PCIe 2.1 1-lane * 2x 2-lane MIPI-CSI * ADC channel * I2C bus * PWM * UART * SPI * SDIO * CAN * I2S * 1v8, 3v3, 5v0, dc-in (12-24V) power rails The Device Tree comes from next-20240110 Linux kernel. Cc: Quentin Schulz <foss+uboot@0leil.net> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2024-02-19doc: board: Add minimal documentation for Sielaff i.MX6 Solo boardFrieder Schrempf1-0/+1
Describe how to build and boot for the Sielaff i.MX6 Solo board. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2024-01-31doc: sophgo: milkv_duo: document Milk-V Duo boardKongyang Liu1-0/+1
Add document for Milk-V Duo board which based on Sophgo's CV1800B SoC. Signed-off-by: Kongyang Liu <seashell11234455@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2023-11-30Merge branch 'staging' of ↵Tom Rini1-0/+1
https://source.denx.de/u-boot/custodians/u-boot-tegra into next Device tree improvents for Paz00 and DM PMIC convertion of recently merged Tegra boards.
2023-11-22doc: board: Move am62x_beagleplay to it's own vendorNishanth Menon1-0/+1
Move BeaglePlay documentation to beagle as a board vendor and update references accordingly. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Bryan Brattlof <bb@ti.com>
2023-11-20doc: add HiSilicon board documentation to HTML docsHeinrich Schuchardt1-0/+1
Add the README files for the HiSilicon boards to the HTML documentation. This required a bit of reformatting. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-09-04nokia_rx51: Remove platformWIP/04Sep2023Tom Rini1-1/+0
This platform is behind on migrations (it is the sole user of the oldest legacy version of the USB gadget stack and is long overdue for migration) and with Pali no longer being a maintainer, we remove this platform. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-08-18Merge tag 'tegra-for-2023.10-rc1' of ↵WIP/18Aug2023Tom Rini1-0/+3
https://source.denx.de/u-boot/custodians/u-boot-tegra ARM: tegra: Changes for v2023.10-rc1 This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.
2023-07-13Merge tag 'u-boot-imx-20230713' of ↵Tom Rini1-0/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20230713 ------------------- Merge for 2023.10. CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16888
2023-07-13doc: board: phytec: add phycore_imx8mmYannic Moog1-0/+1
Add documentation on how to build a bootable U-Boot image for the PHYTEC phyCORE-i.MX 8M Mini. Signed-off-by: Yannic Moog <y.moog@phytec.de>
2023-07-12doc: t-head: lpi4a: document Lichee PI 4A boardYixun Lan1-0/+1
Reviewed-by: Wei Fu <wefu@redhat.com> Signed-off-by: Yixun Lan <dlan@gentoo.org>
2023-06-30board: htc: endeavoru: add One X supportSvyatoslav Ryhel1-0/+1
The HTC One X is a touchscreen-based, slate-sized smartphone designed and manufactured by HTC that runs the Android operating system. The One X features a 4.7" display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM and non-extendable 32 GB of internal storage. UART-A is default debug port. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> Tested-by: Ion Agorria <ion@agorria.com> Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-06-30board: lg: x3: add Optimus 4X HD and Optimus Vu supportSvyatoslav Ryhel1-0/+1
LG X3 is a development board based on Nvidia Tegra 3 SoC on base of which Optimus 4X HD and Optimus Vu were created. Both smartphones feature a 4.7" and 5" panels respectively, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM and 16/32 GB of internal storage. Optimux 4X HD additionally has a micro SD slot. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # LG P880 T30 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-06-30board: asus: transformer: add ASUS Transformer T30 family supportSvyatoslav Ryhel1-0/+1
The ASUS Transformer T30 family are 2-in-1 detachable tablets and AiO developed by ASUS that run the Android operating system (TF600T runs Windows RT and P1801-T runs Android and Windows). The T30 Transformers feature a 10.1-inch display (apart P1801-T), an Nvidia Tegra 3 quad-core chip, 1/2 GB of RAM, and 16/32 GB of storage. Transformers board derives from Nvidia Cardhu development board. This patch brings support for 7 known Transformer devices: - ASUS Transformer Prime TF201 - ASUS Transformer Pad TF300T/TF300TG/TF300TL - ASUS VivoTab RT TF600T (Windows RT based) - ASUS Transformer Infinity TF700T - ASUS Portable AiO P1801-T Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # all devices Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-05-13doc: renesas: add Renesas board docsRalph Siemsen1-0/+1
As a starting point, list all currently supported Renesas boards. For the RZ/N1 board, add details about booting and flashing. Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-05-06board: rockchip: add Anbernic RGXX3 Series DevicesChris Morgan1-0/+1
The Anbernic RGxx3 is a "pseudo-device" that encompasses the following devices: - Anbernic RG353M - Anbernic RG353P - Anbernic RG353V - Anbernic RG353VS - Anbernic RG503 The rk3566-anbernic-rgxx3.dtsi is synced with upstream Linux, but rk3566-anbernic-rgxx3.dts is a U-Boot specific devicetree that is used for all RGxx3 devices. Via the board.c file, the bootloader automatically sets the correct fdtfile, board, and board_name environment variables so that the correct devicetree can be passed to Linux. It is also possible to simply hard-code a single devicetree in the boot.scr file and use that to load Linux as well. The common specifications for each device are: - Rockchip RK3566 SoC - 2 external SDMMC slots - 1 USB-C host port, 1 USB-C peripheral port - 1 mini-HDMI output - MIPI-DSI based display panel - ADC controlled joysticks with a GPIO mux - GPIO buttons - A PWM controlled vibrator - An ADC controlled button All of the common features are defined in the devicetree synced from upstream Linux. TODO: DSI panel auto-detection for the RG353 devices (requires porting of DSI controller driver and DSI-DPHY driver to send DSI commands to the panel). Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-04-20board: starfive: add StarFive VisionFive v2 board supportYanhong Wang1-0/+1
Add board support for StarFive VisionFive v2. Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com> Tested-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-04arm64: imx: Add support for imx8mp-beacon-kitAdam Ford1-0/+1
Beacon Embedded has an i.MX8M Plus development kit which consists of a SOM + baseboard. The SOM includes Bluetooth, WiFi, QSPI, eMMC, and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet PHY. The device trees are already queued for inclusion in Linux 6.3. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-02-19board: gateworks: venice: move README to RSTTim Harvey1-0/+1
Move board/gateworks/venice/README to RST documentation. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2023-01-30imx8mm-phg: Add board supportFabio Estevam1-0/+1
Add the board support for the i.MX8MM Cloos PHG board. This board uses a imx8mm-tqma8mqml SoM from TQ-Group. imx8mm-phg.dts and imx8mm-tqma8mqml.dtsi are taken directly from Linux 6.2-rc3. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-09-18board: purism: add the Purism Librem5 phoneAngus Ainslie1-0/+1
Initial commit of Librem5 u-boot and SPL Signed-off-by: Angus Ainslie <angus@akkea.ca> Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-07-13doc: mediatek: add documentation for mt7621 reference boardsWeijie Gao1-0/+1
The MT7621 requires external binary blob being executed during u-boot's boot-up flow. It's necessary to provide a guide here for users to correctly build the u-boot. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-04-12bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boardsAriel D'Alessandro1-0/+1
Introduce BSH SystemMaster (SMM) S2 board family, which consists of: iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards. Add support for iMX8MN BSH SMM S2 board: - 256 MiB DDR3 RAM - 512MiB Nand - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Add support for iMX8MN BSH SMM S2 PRO board: - 512 MiB DDR3 RAM - 8 GiB eMMC - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-03-20doc: board: raspberrypi: Add documentationMatthias Brugger1-0/+1
Add documentation about the different configuration files for the RaspberryPi board family. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-02-05imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO boardAriel D'Alessandro1-0/+1
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for: - 1GiB DDR4 RAM - 16 GiB eMMC - SD card - Gigabit ethernet - USBOTG1 peripheral - fastboot Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-01-29Nokia RX-51: Convert documentation to rst formatPali Rohár1-0/+1
Convert documentation to rst format Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-04doc: Add documentation for the Arm VExpress64 board configsPeter Hoyes1-0/+1
Create a new documentation section for Arm Ltd boards with a sub-page for the VExpress64 boards (FVP-A and Juno). Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2021-12-31sunxi: add board documentationAndre Przywara1-0/+1
Add some long overdue instructions for building and installing U-Boot on Allwinner SoC based boards. This describes the building process, including TF-A and crust, plus installation to SD card, eMMC and SPI flash, both from Linux and U-Boot itself. Also describe FEL booting. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-18doc: board: Add Calxeda Highbank/Midway documentationAndre Przywara1-0/+1
The Calxeda servers are using U-Boot as the primary bootloader, which was shipped as part of a firmware upgrade package. Even though the machines are considered legacy at this point, the port still works, so deserves some documentation. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31board: samsung: add support for Galaxy A series of 2017 (a5y17lte)Dzmitry Sankouski1-0/+1
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones. U-boot can be used as chain-loaded bootloader to gain control on booting vanilla linux(and possibly others) kernels Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31doc: board: apple: Add Apple M1 documentationMark Kettenis1-0/+1
Provide preliminary instructions on how to get U-Boot to run on Apple Silicon Macs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-03board: siemens: Add support for SIMATIC IOT2050 devicesJan Kiszka1-0/+1
This adds support for the IOT2050 Basic and Advanced devices. The Basic used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS quad-core version. Both variants are booted via a Siemens-provided FSBL that runs on the R5 cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot SPL, ATF and TEE have to reside in SPI flash. Full integration into a bootable image can be found on https://github.com/siemens/meta-iot2050 Based on original board support by Le Jin, Gao Nian and Chao Zeng. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-09-03Revert most of the series for adding vexpress_aemv8r supportWIP/03Sep2021-nextTom Rini1-1/+0
Per a request from Andre Przywara and agreed with by Peter Hoyes, the vexpress aemv8r support wasn't quite ready to be merged, but the discussion had moved off list. We should keep the first patch in the series for now, but revert the rest. This reverts the following commits: e0bd6f31ce41 doc: Add documentation for the Arm vexpress board configs 30e5a449e8c7 arm: Use armv8_switch_to_el1 env to switch to EL1 b53bbca63bf4 vexpress64: Add BASER_FVP vexpress board variant 2f5b7b74903f armv8: Add ARMv8 MPU configuration logic 37a757e227cc armv8: Ensure EL1&0 VMSA is enabled Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-02doc: Add documentation for the Arm vexpress board configsPeter Hoyes1-0/+1
Create a new documentation section for Arm Ltd boards with a sub-page for the vexpress board (FVP-A, FVP-R and Juno). Document how the armv8_switch_to_el1 environment variable can be used to switch between booting from S-EL2/S-EL1 at runtime on the BASER_FVP. Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2021-09-01board: stemmy: Update documentationStephan Gerhold1-0/+1
Over the time, the "stemmy" U-Boot board was tested on several other Samsung smartphones based on ST-Ericsson NovaThor Ux500. Convert the documentation to reStructuredText at doc/board/ste/stemmy.rst and make the device list complete. Also note that the board now boots into USB Fastboot instead of just ending up at the U-Boot prompt. The device table is mostly taken from the postmarketOS wiki article (https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500). All the newly added devices were tested by Linus Walleij. Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-08-17doc: rename Freescale to NXPHeinrich Schuchardt1-1/+1
Freescale Semiconductor, Inc. was merged into NXP Semiconductors in 2015. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-27doc: board: Move j721e document to doc/board/ti/ directoryKishon Vijay Abraham I1-0/+1
Move j721e document from board/ti/j721e/README to doc/board/ti/j721e_evm.rst after converting it to RST format. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-20-kishon@ti.com
2021-07-23board: dragonboard410c: Load U-Boot directly without LKStephan Gerhold1-0/+1
At the moment the U-Boot port for the DragonBoard 410c is designed to be loaded as an Android boot image after Qualcomm's Little Kernel (LK) bootloader. This is simple to set up but LK is redundant in this case, since everything done by LK can be also done directly by U-Boot. Dropping LK entirely has at least the following advantages: - Easier installation/board code (no need for Android boot images) - (Slightly) faster boot - Boot directly in 64-bit without a round trip to 32-bit for LK So far this was not possible yet because of unsolved problems: 1. Signing tool: The firmware expects a "signed" ELF image with extra (Qualcomm-specific) ELF headers, usually used for secure boot. The DragonBoard 410c does not have secure boot by default but the extra ELF headers are still required. 2. PSCI bug: There seems to be a bug in the PSCI implementation (part of the TrustZone/tz firmware) that causes all other CPU cores to be started in 32-bit mode if LK is missing in the boot chain. This causes Linux to hang early during boot. There is a solution for both problems now: 1. qtestsign (https://github.com/msm8916-mainline/qtestsign) can be used as a "signing" tool for U-Boot and other firmware. 2. A workaround for the "PSCI bug" is to execute the TZ syscall when entering U-Boot. That way PSCI is made aware of the 64-bit switch and starts all other CPU cores in 64-bit mode as well. Simplify the dragonboard410c board by removing all the extra code that is only used to build an Android boot image that can be loaded by LK. This allows dropping the custom linker script, special image magic, as well as most of the special build/installation instructions. CONFIG_REMAKE_ELF is used to build a new ELF image that has both U-Boot and the appended DTB combined. The resulting u-boot.elf can then be passed to the "signing" tool (e.g. qtestsign). The PSCI workaround is placed in the "boot0" hook that is enabled with CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK. The extra check for EL1 allows compatibility with custom firmware that enters U-Boot in EL2 or EL3, e.g. qhypstub (https://github.com/msm8916-mainline/qhypstub). As a first step these changes apply only to DragonBoard410c. Similar changes could likely also work for the DragonBoard 820c. Note that removing LK wouldn't be possible that easily without a lot of work already done three years ago by Ramon Fried. A lot of missing initialization, pinctrl etc was already added back then even though it was not strictly needed yet. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
2021-07-06Merge branch '2021-07-06-platform-updates'Tom Rini1-0/+1
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
2021-07-06board: synquacer: Add DeveloperBox 96boards EE supportMasami Hiramatsu1-0/+1
Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/ Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-07-06board: riscv: add openpiton-riscv64 SoC supportTianrui Wei1-0/+1
This patch adds openpiton-riscv64 SOC support. In particular, this board supports a standard bootflow through zsbl->u-boot SPL-> opensbi->u-boot proper->Linux. There are separate defconfigs for building u-boot SPL and u-boot proper Signed-off-by: Tianrui Wei <tianrui-wei@outlook.com> Signed-off-by: Jonathan Balkind <jbalkind@ucsb.edu> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-06-09imx: support for conga-QMX8 boardOliver Graute1-0/+1
Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-02-15sh: Remove sh7753evb boardTom Rini1-1/+0
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-18doc: board: Add Microchip MPFS Icicle Kit docPadmarao Begari1-0/+1
This doc describes the procedure to build, flash and boot Linux using U-boot on Microchip MPFS Icicle Kit. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-12-07doc: board: imx8qm-rom7720-a1.rst: convert readme to reSTOliver Graute1-0/+1
Convert README to reStructuredText format. Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-10-23board: kontron: add sl28 supportMichael Walle1-0/+1
Add basic support for the Kontron SMARC-sAL28 board. This includes just the bare minimum to be able to bring up the board and boot linux. For now, the Single and Dual PHY variant is supported. Other variants will fall back to the basic variant. In particular, there is no watchdog support for now. This means that you have to disable the default watchdog, otherwise you'll end up in the recovery bootloader. See the board README for details. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-08-14doc: xen: Add Xen guest ARM64 board documentationAnastasiia Lukianenko1-0/+1
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
2020-07-01doc: riscv: Add documentation for Sipeed Maix BitSean Anderson1-0/+1
This patch adds documentation for the Sipeed Maix bit, and more generally for the Kendryte K210 processor. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini1-0/+1
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-18board: amlogic: move boards doc into doc/board/amlogicNeil Armstrong1-0/+1
Move the natural text Amlogic board README files to doc/board/amlogic into reStructuredText and : - add reStructuredText markup for bash code - fix secondary titles markup - move board support into global support matrix Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit v1.1 at 2024-10-20 07:09:45 +0000