aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2019-08-23Convert CONFIG_FSL_USDHC to KconfigAdam Ford116-115/+116
This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-23kconfig: Convert CONFIG_MXS_GPIO to KconfigLukasz Majewski12-0/+12
This converts the following to Kconfig: CONFIG_MXS_GPIO Travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/builds/571260789 Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-08-22configs: ls1088a: Enable DM support for pcf2127 rtcChuanhua Han3-3/+27
Enable related configs on all ls1088aqds boards to support pcf2127 rtc DM function. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22configs: ls2088a: Enable DM support for ds3231 rtcChuanhua Han3-5/+23
Enable related configs on all ls2088aqds boards to support ds3231 rtc DM function. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22configs: ls1028a: Enable DM support for pcf2127 rtcChuanhua Han4-4/+36
Enable related configs on all ls1028aqds boards to support pcf2127 rtc DM function. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Tested-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22configs: lx2160: enable DM support for pcf2127 rtcChuanhua Han4-0/+32
Enable related configs on all lx2160ardb boards to support pcf2127 rtc DM feature. Also remove SYS_I2C_MXC_I2Cx, where x is from 1 to 8 from Kconfig. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22configs: ls1043aqds: Move CONFIG_FSL_QSPI to defconfigAshish Kumar3-0/+6
Move CONFIG_FSL_QSPI from header file to defconfigs, consequently unset imply config(CONFIG_SPI_FLASH_BAR) which is not valid for LS series. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-20arm: omap2: am43xx: Enable CONFIG_BLKSuniel Mahesh5-5/+5
With DM_MMC enabled, enable CONFIG_BLK to remove this compile warning for am43xx based targets: ===================== WARNING ====================== This board does not use CONFIG_DM_MMC. Please update the board to use CONFIG_DM_MMC before the v2019.04 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Targets were compile tested, build was clean. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-20arm: baltos: switch to driver model for the watchdog timerYegor Yefremov1-0/+1
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-08-20Revert "ARM: da850-evm: Enable SPI Flash and NAND Flash when booting NOR"Adam Ford1-6/+2
Sorry for the noise, but there appears to be a regression with older hardware. Since it broke the direct_nor boot option, it should be reverted until a better solution is available. This reverts commit 51cd1e2373274dc3167dabba628dcfc25828d36d.
2019-08-20ARM: omapl138_lcdk: Enable USBAdam Ford1-0/+11
The OMAPL138-lcdk has two USB controllers which are currently disabled. This patch enables them. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-19configs: update rk3288 veyron defconfigsUrja Rannikko4-42/+62
Updates jerry, mickey, minnie and speedy defconfigs to: - fit the SPL in 32k - boot from SPI (only) - remove gadget support (these have no OTG port) Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Rebase on top of tree) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19configs: Move CONFIG_CMD_USB_MASS_STORAGE properly into KconfigUrja Rannikko11-10/+11
This affects RK3036, RK322X and RK3288 - the defconfig changes done by moveconfig.py for the veyrons were left out on purpose because they dont have an OTG port, and will get their config updated in the next commit. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19configs: Move CONFIG_SPI_FLASH_GIGADEVICE properly into KconfigUrja Rannikko6-0/+6
Affects rk3288 veyrons and rk3036, this was mostly done by moveconfig.py. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19rockchip: rk3399: Add ROC-RK3399-PC supportLevin Du1-0/+61
Add initial support for ROC-RK3399-PC board. Specification - Rockchip RK3399 - LPDDR4 4GiB - eMMC slot - SD card slot - RTL8211E 1Gbps - HDMI Out, DP, MIPI DSI/CSI, EDP - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-roc-pc.dts sync from Linux v5.2: "arm64: dts: rockchip: add support for ROC-RK3399-PC board" (sha1: 8bb878cf20ae10809c36db96993bfce7026d062b) Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-14configs: Resync with savedefconfigTom Rini143-400/+247
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini12-283/+25
- Various improvements to Keymile boards - mostly DT conversation (Pascal & Holger) - Removal of now unsupported Keymile boards (Pascal & Holger) - Small MVEBU PCI fix (Marek) - Turris Omnia defconfig update (Marek) - Misc Allied Telesis defconfig updates (Chris)
2019-08-12Merge tag 'u-boot-amlogic-20190812' of ↵Tom Rini1-0/+75
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - amlogic: add support for the SEI Robotic SEI510
2019-08-12Merge branch '2019-08-11-ti-imports'Tom Rini4-6/+131
- More DaVinci updates and fixes - PCIe support on am65x - Watchdog converted to DM - Assorted other bugfixes
2019-08-12ARM: da850-evm: Enable SPI Flash and NAND Flash when booting NORAdam Ford1-2/+6
Historically there have been various boot options, SPI flash, NAND or NOR. The NOR flash is mutually exclusive with MMC, but it isn't mutually exclusive with NAND or SPI Flash, so this patch enables both NAND flash and SPI Flash when booting from NOR. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12ARM: da850-evm: Enable filesystem commands when booting from NORAdam Ford1-4/+0
The configuration with NOR is mutually exclusive with MMC, and as such, the filesystem commands were disabled. With the USB host enabled, this patch enables the file system command which can be executed on storage devices attached to the USB. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12ARM: da850-evm: Increase environment NOR partition offsetAdam Ford1-2/+7
The current size allocated to U-Boot is 384k, but U-Boot has grown to 436K which means that saving the environmental variables wipes out part of the U-Boot source and the board ceases to function. Due to the sector and erase size for the NOR part and a desire to not have to change partition sizes often, this patch moves the U-Boot environmental variables to an offset of 1M so saveenv does not brick the board. This patch also sets up MTDIDS and MTDPARTS to clearly show where U-Boot and U-Boot's environmental variables are located. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12configs: am65x_evm_a53: enable support for PCIe ethernet cardsSekhar Nori1-1/+3
Enable support for Intel E1000 based PCIe ethernet cards that can be used to test PCIe RC functionality on AM65x EVM. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12configs: am65x_evm_a53: enable PCIe supportSekhar Nori1-0/+6
Enable support for PCIe and related configurations on AM654 EVM platform. Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12board/BuR/brsmarc1: initial commitHannes Schmelzer1-0/+109
This commit adds support for the B&R brsmarc1 SoM. The SoM is based on TI's AM335x SoC. Mainly vxWorks 6.9.4.x is running on the board, doing some PLC stuff on various carrier boards. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2019-08-12watchdog: omap_wdt: Disable DM watchdog support in SPLSuniel Mahesh1-0/+1
This patch disables DM watchdog support for SPL builds and uses the legacy omap watchdog driver on TI AM335x chipsets. The following build error is reported if DM watchdog support was enabled in SPL: CC spl/drivers/usb/gadget/rndis.o LD spl/drivers/usb/gadget/built-in.o LD spl/drivers/usb/musb-new/built-in.o LD spl/drivers/built-in.o LD spl/u-boot-spl arm-linux-ld.bfd: u-boot-spl section .u_boot_list will not fit in region .sram arm-linux-ld.bfd: region .sram overflowed by 440 bytes make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 Adjusted WATCHDOG_RESET macro accordingly. Earlier it was pointing to hw_watchdog_reset. Since CONFIG_WATCHDOG replaces CONFIG_HW_WATCHDOG, now WATCHDOG_RESET macro points to watchdog_reset. This watchdog_reset is not defined anywhere for am33xx/omap2 and needs to be defined. Fixed this by simply calling hw_watchdog_reset in watchdog_reset. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx/omap2 based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org> [trini: Fix watchdog.h logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12watchdog: omap_wdt: Convert watchdog driver to use DT and DMSuniel Mahesh1-0/+2
This patch adds device tree and driver model watchdog support, converts the legacy omap watchdog driver to driver model for TI AM335x chipsets. The following compile warning is removed: ===================== WARNING ====================== This board does not use CONFIG_WDT (DM watchdog support). Please update the board to use CONFIG_WDT before the v2019.10 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== CONFIG_HW_WATCHDOG is no more a default option for AM33XX devices after DT/DM conversion, adjusted kconfig accordingly. DM watchdog support is enabled by default in SPL. The SPL image doesn't fit into SRAM because of size constraints and build breaks with an overflow. For this reason DM watchdog support should be disabled in SPL, driver code should be adjusted accordingly to serve this purpose. Built and tested on AM335x device (BeagleboneBlack), compile tested for all other AM33xx based boards. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-12configs: sei510: disable PSCI_RESET to support fastboot reboot_flagNeil Armstrong1-0/+1
Disable the PSCI_RESET reboot handler to permit handling the reboot flag and calling the PSCI handler with the flag in parameter. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12boards: meson: add g12a sei510Jerome Brunet1-0/+74
The SEI510 board is based on the Amlogic S905X2 SoC from the Amlogic G12A SoC family. The board has the following specifications : - Amlogic S905X2 ARM Cortex-A53 quad-core SoC - XGB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - eMMC - SDcard - Infrared receiver - SDIO WiFi Module The board default behaviour is for booting Android and triggers fastboot on recovery or reboot mode. USB vendor ID (used by fastboot) is 0x18d1 (Google) for default udev rules for existing android users work out of the box. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-08-12arm: mvebu: turris_omnia: update defconfigMarek Behún1-0/+3
Add Macronis SPI flash support - some Omnia routers are shipped with this SPI flash chip. Also add the memtest command to defconfig. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-12ARM: configs: Enable DM_ETH for SBx81LIFKW and SBx81LIFXCATChris Packham2-0/+6
The mvgbe driver supports DM_ETH so switch these boards to using it. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-12powerpc/km: remove unmaintained board KMLION1Holger Brunck1-57/+0
This board is unmaintained and can be removed. This also allows us to remove kmp204x-common.h and integrate it in kmp204x.h. Signed-off-by: Valentin Longchamp <valentin.longchamp@ch.abb.com> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-12powerpc/km: remove unmaintained target KMVECT1Holger Brunck1-181/+0
Signed-off-by: Valentin Longchamp <valentin.longchamp@ch.abb.com> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-12km/arm: remove unmaintained target PORTL2Pascal Linder1-47/+0
Remove the PORTL2 board and all its dependencies as it is no longer supported by the company. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-12km: add Kconfig menus for KM boardsPascal Linder8-0/+18
To execute the conversion away from board specific header files, Kconfig menus have been implemented for all KM boards and additionally for those having an ARM architecture. For the moment, the preprocessor definitions stay in the headers. The boolean types, however, needed a modification (#define CONFIG_* 1). The default configuration files of some boards required an update in order to not change the currently defined values of the configurations. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-08-11board: hisilicon: Add support for Hikey960 boardManivannan Sadhasivam1-0/+30
This commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC. More information about this board can be found in 96Boards website: https://www.96boards.org/product/hikey960/ The initial supported/tested devices include: - Debug serial - SD With these support, it's good enough for loading Linux Kernel from SD. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-10Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini1-0/+69
- R8A77980 V3H support
2019-08-10Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini3-0/+15
- DaVinci USB updates - Various OHCI fixes - Gadget fixes
2019-08-09Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini4-0/+25
- Enable SD slot on Intel Edison - Populate CSRT ACPI table for shared DMA controller on Intel Tangier - Convert Intel ICH-SPI driver to use new spi-mem ops - Enable config_distro_bootcmd for QEMU x86 - Support U-Boot as a payload for Intel Slim Bootloader - Avoid writing temporary asl files into the source tree which fixes the parallel build issue occasionally seen
2019-08-09ARM: renesas: Add R8A77980 V3H Condor board codeMarek Vasut1-0/+69
Add board code for the R8A77980 V3H Condor board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09apalis-tk1: support v1.2 hardware revisionMarcel Ziswiler1-1/+1
Support the V1.2 hardware revision with the following pin muxing changes: Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4 are now used as DDC pins. Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are now used as USB power enable signals. Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power enable signals are now used as GPIO3 and GPIO4. Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is loaded on V1.2 and later modules and resp. USB power enable signals activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: provide proper USB vendor idIgor Opaniuk1-1/+1
Use unified values for USB Product/Vendor numbers when the config block is missing Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09colibri/apalis tegra: drop DFU supportIgor Opaniuk4-12/+0
We never really added a sensible DFU configuration for platforms based on eMMC. Most of the things one might want to do can also be done with UMS or fastboot, so drop the DFU configuration. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09board: intel: Add new slimbootloader boardPark, Aiden1-0/+22
Add slimbootloader board to run U-boot as a Slim Bootloader payload - Add new board/intel/slimbootloader directory with minimum codes - Add slimbootloader configuration files - Add doc/board/intel/slimbootloader.rst Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: add slimbootloader board MAINTAINERS file] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09qemu-x86: Use config_distro_bootcmdJoshua Watt2-0/+2
Converts qemu x86 machines to boot using distro_config. The intent is to allow u-boot in qemu to be maximally compatible with many boot methods without having to change the config. Previously, u-boot would only boot in a very limited set of circumstances where there was a /boot/vmlinuz on scsi 0:3 with no ramdisk. Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: convert doc updates to reST] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09x86: edison: Enable SD slotAndy Shevchenko1-0/+1
Enable SD slot on Intel Edison platform. By default firmware doesn't put device on active state. Thus, we have to do this explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09Merge tag 'u-boot-rockchip-20190809' of ↵Tom Rini5-2/+228
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add rk3399 boards Khadas Edge/-V/-Captain - Add fully souce code support for rk3328 including TPL/DRAM init - Enable boot from eMMC for rk3399 rock960/ficus boards - turn on the IO supply for dw_mmc
2019-08-08ARM: da850-evm: Enable the USB PHY and MUSB DriverAdam Ford3-0/+15
This patch will enable the MUSB driver to support mass storage devices connected to the OTG port in host mode. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-05configs: rk3328: enable TPL for rock64-rk3328_defconfigMatwey V. Kornilov1-0/+14
Until now, binary TPL by Rockchip has been required for booting procedure. Starting from this commit we may use only u-boot to boot the device. Note, that using binary TPL instead of U-boot TPL is still working. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-05rockchip: evb-rk3328: enable defconfig options for TPL/SPLKever Yang1-2/+35
Enable driver options for TPL/SPL in evb-rk3328_defconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from commit https://github.com/rockchip-linux/u-boot/commit/df4f40acb449815384e397dcaf5b618bbc6cd855 with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit v1.1 at 2024-08-04 10:34:53 +0000