aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2021-07-14board: stemmy: Parse atags to get available memoryStephan Gerhold1-1/+1
At the moment the "stemmy" board attempts to detect the RAM size with a simple memory test (get_ram_size()). Unfortunately, this does not work correctly for devices with 768 MiB RAM (e.g. Samsung Galaxy Ace 2 (GT-I8160), "codina"). Reading/writing memory after the 768 MiB RAM succeeds but actually overwrites some earlier parts of the memory. For U-Boot this does not result in any major problems, but on Linux this will eventually lead to strange crashes because of the memory corruption. Since the "stemmy" U-Boot port is designed to be chainloaded from the original Samsung bootloader, the most reliable way to get the available amount of RAM is to look at the ATAGS passed by the Samsung bootloader. Fortunately, the header used to generate ATAGS in U-Boot (asm/setup.h) can also be easily used to parse them. Also clarify and simplify stemmy.h a bit to make it more clear where some of the magic values in there are actually coming from. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14board: armltd: Remove bootargs from Total Compute configurationAnders Dellien1-2/+1
This information will be maintained in the device tree instead. Signed-off-by: Anders Dellien <anders.dellien@arm.com>
2021-07-10sunxi: h3: Add initial ZeroPi supportYu-Tung Chang1-0/+13
ZeroPi is a new board of high performance with low cost designed by FriendlyElec., using the Allwinner H3 SOC. ZeroPi features - Allwinner H3, Quad-core Cortex-A7@1.2GHz - 256MB/512MB DDR3 RAM - microsd slot - 10/100/1000Mbps Ethernet - Debug Serial Port - DC 5V/2A power-supply Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-10configs: OrangePi PC2: Update defaultsJernej Skrabec1-1/+3
OrangePi PC2 board has DRAM with ODT, so enable it. H5 SoC is also connected to voltage regulator. It's default value is reasonable at reset, but might be too low when rebooting with a lower voltage programmed. In order to avoid instability, enable driver for it and set it to appropriate voltage. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Tested-by: Andre Przywara <andre.przywara@arm.com> [Andre: remove original ZQ value change, adjust commit message] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-08configs: Resync with savedefconfigTom Rini17-114/+58
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Revert "arm: Remove nsa310s board"Tom Rini1-0/+46
While this platform has not yet been converted, there is active efforts to do so. Keep the platform for now. This reverts commit aa697e6904ba1b3144a46ec642d4695e7c0cdc3e. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove spear600 boards and the rest of SPEAr supportTom Rini5-222/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the last of the SPEAr platforms, so remove the rest of the remaining support as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove spear320 boardsTom Rini6-222/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is also the last SPEAR3XX platform, remove that symbol as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove spear310 boardsTom Rini6-222/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove spear300 boardsTom Rini4-144/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove nsa310s boardTom Rini1-46/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Gerald Kerma <dreagle@doukki.net> Cc: Tony Dinh <mibodhi@gmail.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove gplugd boardTom Rini1-28/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Ajay Bhargav <contact@8051projects.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove edb9315a boardTom Rini1-54/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last PL010_SERIAL using board, so remove those references. Cc: Sergey Kostanbaev <sergey.kostanbaev@fairwaves.ru> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07arm: Remove at91rm9200ek boardsTom Rini2-75/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Andreas Bießmann <andreas@biessmann.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07mx6memcal: Disable USB GADGET in SPLTom Rini1-9/+0
As this board does not use CONFIG_OF_CONTROL and the DM_USB migration deadline has passed, disable USB_GADGET support. Cc: Eric Nelson <eric@nelint.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Eric Nelson <eric@nelint.com>
2021-07-07dockstar: Perform base CONFIG_DM enablementTom Rini1-0/+2
As these boards support CONFIG_OF_CONTROL today, perform a basic CONFIG_DM migration. Cc: Eric Cooper <ecc@cmu.edu> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ib62x0: Perform base CONFIG_DM enablementTom Rini1-0/+2
As these boards support CONFIG_OF_CONTROL today, perform a basic CONFIG_DM migration. Cc: Luka Perkov <luka@openwrt.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07iconnect: Perform base CONFIG_DM enablementTom Rini1-0/+2
As these boards support CONFIG_OF_CONTROL today, perform a basic CONFIG_DM migration. Cc: Luka Perkov <luka@openwrt.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07pogo_e02: Perform base CONFIG_DM enablementTom Rini1-0/+2
As these boards support CONFIG_OF_CONTROL today, perform a basic CONFIG_DM migration. Cc: Dave Purdy <david.c.purdy@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07openrd: Perform base CONFIG_DM enablementTom Rini3-0/+6
As these boards support CONFIG_OF_CONTROL today, perform a basic CONFIG_DM migration. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07snapper9260/snapper9g20: Disable USBTom Rini2-6/+0
These boards have not converted to DM_USB by the deadline, disable USB support as they do not enable CONFIG_OF_CONTROL. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07configs: Remove unnecessary CONFIG_DM_PCI_COMPAT=yTom Rini139-139/+0
The following boards no longer need CONFIG_DM_PCI_COMPAT enabled, so remove that. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove T4160RDB boardTom Rini1-57/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_T4160 platform, remove that support as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove MPC832XEMDS boardsTom Rini5-761/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove MPC8323ERDB boardTom Rini1-115/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove MPC8315ERDB boardTom Rini1-156/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_MPC8315 platform, remove that support as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove sbc8641d boardTom Rini1-39/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-07ppc: Remove xpedite boardsTom Rini4-222/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this includes the last ARCH_MPC8572 platform, remove that as well. Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peter Tyser <ptyser@xes-inc.com>
2021-07-07ppc: Remove kmcoge4 boardTom Rini1-72/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Cc: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove MPC8568MDS boardTom Rini1-42/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_MPC8568 platform, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOTTom Rini5-370/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_T1023 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove MPC8555CDS boardsTom Rini2-81/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_MPC8555 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove MPC8541CDS boardTom Rini2-81/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the only MPC8541 target left, remove that architecture support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove TQM834x boardTom Rini1-166/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove sbc8548 boardsTom Rini5-209/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and are also missing conversion to CONFIG_DM. Remove them. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove caddy2 / vme8349 boardsTom Rini2-257/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove MPC8313ERDB boardsTom Rini4-692/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline. Remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove ve8313 boardTom Rini1-160/+0
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2021-07-07ppc: Remove mpc8308_p1m boardTom Rini1-133/+0
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove many T104x boardsTom Rini14-1012/+0
These boards have not been converted to CONFIG_DM_PCI, CONFIG_DM_USB or in some cases CONFIG_DM itself by the deadline. Remove them. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Remove sbc8349 boardTom Rini3-347/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07m68k: Remove M5475x boardsTom Rini7-224/+0
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is the last of the mcf547x_8x family of boards, remove that support as well. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07m68k: Remove M5485 boardsTom Rini8-256/+0
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is all of the CONFIG_M548x platforms as well, remove that code. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07ppc: Drop MPC837XERDB_SLAVE for nowTom Rini1-140/+0
Drop the MPC837XERDB_SLAVE configuration. Cc: Sinan Akman <sinan@writeme.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Merge tag 'dm-pull-6jul21' of https://source.denx.de/u-boot/custodians/u-boot-dmWIP/07Jul2021Tom Rini5-0/+5
various minor sandbox improvements
2021-07-06Merge branch '2021-07-06-platform-updates'Tom Rini9-25/+170
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
2021-07-06lpc32xx: ea-lpc3250devkitv2: enable i2c (DM)Trevor Woerner1-0/+3
Enable a DMed i2c driver for the ea-lpc3250devkitv2 board. Include some sample commands/output for testing. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06Kconfig: convert CONFIG_SYS_I2C_LPC32XXTrevor Woerner2-0/+2
Convert the CONFIG_SYS_I2C_LPC32XX configuration symbol from an include directive to a Kconfig value. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06arm: lpc32xx: add EA LPC3250 DevKitv2 board supportTrevor Woerner1-0/+23
Add basic support for running U-Boot on the Embedded Artists LPC3250 Developer's Kit v2 board by launching U-Boot from the board's s1l loader (which comes pre-installed on the board). Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06lpc32xx: Kconfig: switch to CONFIG_CONS_INDEXTrevor Woerner2-0/+4
There's nothing special or unique to the lpc32xx that requires its own config parameter for specifying the console uart index. Therefore instead of using the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the already-available CONFIG_CONS_INDEX from Kconfig. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-09 04:15:09 +0000