aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2019-01-18sunxi: usb: Switch to Generic host controllersJagan Teki97-0/+97
Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-18board: sun50i-h5: Add Emlid Neutis N5 supportAleksandr Aleksandrov1-0/+13
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC. - add neutis-devboard target to dtb makefile - add dtsi file for Neutis N5 needs - add config file for Neutis N5 Dev board Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: update proper commit head] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-17Merge tag 'mips-pull-2019-11-16' of git://git.denx.de/u-boot-mipsTom Rini31-49/+33
- MIPS: mscc: various enhancements for Luton and Ocelot platforms - MIPS: mscc: added support for Jaguar2 platform - MIPS: optimised SPL linker script - MIPS: bcm6368: fix restart flow issues - MIPS: fixed CONFIG_OF_EMBED warnings for all MIPS boards - MIPS: mt7688: small fixes and enhancements - mmc: compile-out write support if disabled
2019-01-16mips: mt7688: gardena-smart-gateway: Update mtdparts/mtdids for Kernel 4.19Stefan Roese2-4/+4
With the new SPI NOR framework in v4.19, we need to adapt the MTD parts so that the kernel cmdline parameter "mtdparts=" uses the correct naming for the devices. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MIPS: bmips: switch to CONFIG_OF_SEPARATEDaniel Schwierzeck11-11/+0
Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Based on https://patchwork.ozlabs.org/patch/1019791/ Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MIPS: xilfpga: switch to CONFIG_OF_SEPARATEDaniel Schwierzeck1-1/+0
Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MIPS: pic32mzdask: switch to CONFIG_OF_SEPARATEDaniel Schwierzeck1-1/+0
Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MIPS: malta: switch to CONFIG_OF_SEPARATEDaniel Schwierzeck4-4/+0
Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MIPS: boston: switch to CONFIG_OF_SEPARATEDaniel Schwierzeck8-8/+0
Fix the Kconfig warning to not use CONFIG_OF_EMBED in defconfigs. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MSCC: Add board support for Jaguar2 SOC familyHoratiu Vultur1-0/+59
Add board support and configuration for Jaguar2 SOC family. The detection of the board type in this family is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-01-16mips: mscc: DT: Update luton device tree to use fast SPI driverLars Povlsen1-1/+2
Thes patch change the luton base device tree to use the newly added SPI bitbang driver. It also updates the "mscc_luton_defconfig" to use the new driver. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2019-01-16MIPS: jz47xx: remove custom u-boot-spl.ldsDaniel Schwierzeck1-1/+0
There is no real difference between the generic variant and the custom variant except that the generic variant is more optimised. This also saves 24 Bytes in the SPL binary. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
2019-01-16mips: ocelot: Enable use of serial gpio for LEDLars Povlsen1-0/+3
This enables the use of the MSCC serial GPIO driver to control the LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: luton: Enable use of serial gpio for LEDLars Povlsen1-0/+3
This enables the use of the MSCC serial GPIO driver to control the LEDs on the MSCC VCoreIII 'luton' SoC. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-16mips: mscc: luton+ocelot: Remove board config options, do probingLars Povlsen3-65/+9
As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
2019-01-15configs: stm32: Remove CONFIG_OF_EMBEDPatrice Chotard5-5/+0
Building with CONFIG_OF_EMBED generates build warnings, as it should only be used for debugging purposes. Remove CONFIG_OF_EMBED from all stm32 config files which are using this flag. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-01-15am335x: igep003x: Add Device Tree Support and DM_MMC driverEnric Balletbo i Serra1-0/+3
This adds device tree and the DM_MMC driver for the AM335x IGEP based boards. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15am335x: sl50: Add Device Tree Support and DM_MMC driverEnric Balletbo i Serra1-0/+3
This adds device tree and the DM_MMC driver for the SL50 board. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15omap3: igep00x0: Add Device Tree Support and DM_MMC driverEnric Balletbo i Serra1-0/+3
This adds device tree for OMAP3 IGEP based boards and the DM_MMC driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-15omap3: igep00x0: Switch to simple malloc in SPLEnric Balletbo i Serra1-0/+1
To save more space, switch to simple malloc here. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15omap3: igep00x0: Switch to using TI_COMMON_CMD_OPTIONEnric Balletbo i Serra1-6/+1
Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15omap3: igep00x0: Remove USB support due DM_USB deadlineEnric Balletbo i Serra1-5/+0
The USB support for this board was never really tested, in fact, the presence of these options are more a copy & paste error from the Beagleboard than a feature that really was used. As doesn't work, remove for now. If someone at some point want to add this support he'll need to migrate the board to use CONFIG_DM_USB instead. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15omap3: igep00x0: Remove unmaintained IGEP0032 defconfigEnric Balletbo i Serra1-53/+0
The IGEP0032 board was never officially pushed upstream and actually I don't have access to this hardware, unless someone with the hardware wants to start working on this doesn't makes sense have this defconfig here. So remove it. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-01-15mmc: Convert HI6220 MMC driver to driver modelManivannan Sadhasivam2-0/+2
Convert HiSilicon HI6220 MMC driver based on DWMMC IP to driver model. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Enable this on poplar] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-14configs: MediaTek: use OF_SEPARATE instead of OF_EMBEDWeijie Gao2-2/+2
This patch replace OF_EMBED with OF_SEPARATE of defconfig files of MediaTek boards because now OF_EMBED is only used for debugging purpose. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-14arm: MediaTek: add ethernet support for MT7629 boardsWeijie Gao1-0/+5
Enable ethernet related configs to mt7629_rfb_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
2019-01-14arm: MediaTek: add ethernet support for MT7623 boardsWeijie Gao1-0/+6
Enable ethernet related configs to mt7623n_bpir2_defconfig. Add default IP addresses. Enable noncached memory region required by ethernet driver. Signed-off-by: Mark Lee <Mark-MC.Lee@mediatek.com>
2019-01-14poplar_defconfig: enable fastboot supportShawn Guo1-0/+11
It enables fastboot support on Poplar board by using DWC2 OTG gadget driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2019-01-14am57xx_evm_defconfig: Enable YMODEM supportYan Liu1-0/+1
Enable CONFIG_SPL_YMODEM_SUPPORT to support UART boot Signed-off-by: Yan Liu <yan-liu@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-01-14test: bootcount: add bootcount-uclass testPhilipp Tomsich1-0/+5
Add a test for the bootcount uclass, which uses the RTC bootcount backend (i.e. drivers/bootcount/rtc.c is implictly also tested). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-14imx8mq_evk_defconfig: Move file system options to KconfigFabio Estevam1-0/+5
Chris Spencer reports that when enabling ext4 read support without also enabling write support the following error is seen: fs/fs.c:198:12: error: 'ext4_write_file' undeclared here (not in a function); did you mean 'ext4_read_file'? .write = ext4_write_file, ^~~~~~~~~~~~~~~ Fix this problem by moving these options to Kconfig. Reported-by: Chris Spencer <spencercw@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-01-11Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini34-16/+44
2019-01-10usb: Make compiling gadget support optionalJean-Jacques Hiblot18-0/+28
There is no need to compile and include this code if it is not used. CONFIG_USB_GADGET can be used for the purpose. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-10Kconfig: rename CONFIG_SPL_USB_GADGET_SUPPORT as CONFIG_SPL_USB_GADGETJean-Jacques Hiblot16-16/+16
The SPL option for USB gadget should be named after the option for u-boot (CONFIG_USB_GADGET) Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-01-09board: tbs2910: Remove FIT support in defconfig to reduce u-boot sizeSoeren Moch1-1/+0
The current defconfig build generates a u-boot.imx file that is too large for the available space on a eMMC/SD card. Installing this file overwrites the u-boot environment. So disable the unused FIT support to reduce the size of the u-boot binary. Signed-off-by: Soeren Moch <smoch@web.de>
2019-01-09arm: mx5: Enable WDT and bootcounter on M53MenloMarek Vasut1-0/+8
Enable watchdog and bootcounter support on the M53Menlo board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2019-01-09board: toradex: colibri_vf: unset NFS and LOADS/BStefan Agner1-0/+3
Safe some space by not selecting CMD_NFS and CMD_LOADS/B. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-01-07configs: Resync with savedefconfigTom Rini304-483/+140
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-03Merge tag 'for-v2019.01' of git://git.denx.de/u-boot-videoTom Rini1-1/+2
TrueType fixes and documentation
2019-01-02rockchip: rk3399-puma: enable full pinctrl driver in Puma defconfig.Christoph Muellner1-0/+1
This patch enables the full pinctrl driver in the defconfig for the RK3399-Q7. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-02rockchip: rk3399-puma: enable PWM regulator in Puma defconfig.Christoph Muellner1-0/+1
This patch enables the PWM regulator driver in the defconfig for the RK3399-Q7. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-01-01Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imxTom Rini7-2/+113
imx for 2019.01 - introduce support for i.MX8M - fix size limit for Vhybrid / pico boards - several board fixes - w1 driver for MX2x / MX5x
2019-01-01imx: add i.MX8MQ EVK supportPeng Fan1-0/+37
Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-01-01arm: imx7d: cl-som-imx7: migration to CONFIG_BLKYaniv Levinsky1-1/+5
Enable driver model for USB, MMC and REGULATOR drivers. Set run-time configuration via Device Tree. Signed-off-by: Yaniv Levinsky <yaniv.levinsky@compulab.co.il>
2019-01-01embestmx6boards: Add SPL supportFabien Lahoudere1-0/+48
In order to boot faster with falcon mode, we need to add SPL support to riotboard. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2019-01-01configs: mx23_olinuxino_defconfig: disable bootefi commandMichael Heimpold1-0/+1
CONFIG_CMD_BOOTEFI is enabled by Kconfig default, but rarely used on this board/platform. So let's disable it for the boards default config. This also saves around 16 KiB in the final u-boot.sb. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2019-01-01configs: mx23_olinuxino_defconfig: fix status led definitionMichael Heimpold1-1/+1
While migrating individual status led usages to Kconfig stuff, a (random) value was introduced for this board which does not work but produces the following error message during boot: __led_init: failed requesting GPIO59! Since Kconfig does not seem to accept a define as this point, but the mxs gpio driver requires not only a simple integer value, we need to use the plain value of MX23_PAD_SSP1_DETECT__GPIO_2_1. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Fixes: 2d8d190c8394 ("status_led: Kconfig migration")
2018-12-31Merge git://git.denx.de/u-boot-x86Tom Rini1-1/+0
This includes x86 edison defconfig file clean up, and coreboot file system (cbfs) fixes.
2018-12-31x86: edison: move CONFIG_CMD_PCI from header file to defconfigAndy Shevchenko1-1/+0
Use defconfig instead of header file for CONFIG_CMD_PCI. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-29ARM: uniphier: allow to source boot script before distro-bootMasahiro Yamada3-3/+3
Some users might need additional setups before booting the kernel. If there is found a file 'boot.scr', run it before invoking the distro boot command. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.1 at 2024-07-15 21:21:00 +0000