aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2022-05-24Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiWIP/24May2022Tom Rini2-2/+1
The bulk of it is (finally!) some DT sync from the kernel. We refrained from syncing one incompatible change, as this would spoil booting Linux kernels before v5.13 with U-Boot's DT (via UEFI, for instance). I test booted Linux v5.18 and v5.4 with that new DT on some boards, and the headless peripherals (MMC, USB, Ethernet) seemed to work. The rest are fixes: - silencing missing clock warnings due to the new pinctrl driver - fixing "UART0 on PortF", allowing UART access through the SD card pins - add an F1C100s clock driver, to enable MMC support (SPI comes later) - some cleanups for CONS_INDEX_n in Kconfig Tested on BananaPi-M1, Pine64-LTS, Pine-H64, X96-Mate (H616) and OrangePi-Zero.
2022-05-23arm: socfpga: Add the terasic de10-standard boardHumberto Naves1-0/+66
Use the de10-nano files as templates for the de10-standard board. The files in qts directory are generated by quartus from the GHRD design. Signed-off-by: Humberto Naves <hsnaves@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2022-05-23configs: Resync with savedefconfigTom Rini32-41/+7
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-23ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2Marek Vasut1-0/+244
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-05-23ARM: imx: mx5: Convert MX53 Menlo board to DM I2C and DM RTCMarek Vasut1-6/+2
Convert the board to DM I2C and DM RTC. This leads to removal of board side iomuxc configuration, which is now done using pin control driver, and conversion of board side legacy I2C accessors to DM ones. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2022-05-23Revert "sunxi: f1c100s: Drop SYSRESET to enable reset functionality"Andre Przywara1-1/+0
The original Allwinner F1C100 .dtsi imported from the Linux kernel tree used the wrong compatible string for the watchdog timer, so the Allwinner DM reset driver was not working properly. We worked around this by disabling the SYSRESET driver, so the hardcoded SPL reset driver took over. Now the issue was fixed in the DTs in mainline Linux, and we synced the fixed .dtsi file into U-Boot, so drop the hack and use the normal U-Boot proper reset infrastructure. This reverts commit cfcf1952c11e6ffcbbf88eb63c49edca2acf1d5e. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-05-23ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1Samuel Holland1-1/+1
Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-05-20ARM: dts: imx: Migrate iMX6QDL picoITX DTs from LinuxPhilip Oberfichtner1-1/+1
Migrate DH picoITX device trees from Linux commit 42226c989789 (tag v5.18-rc7). No changes have been made, the DTs are exact copies. Furthermore add the DTB to dh_imx6_defconfig. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from LinuxPhilip Oberfichtner1-1/+1
Migrate DH DRC02 device trees from Linux commit 42226c989789 (tag v5.18-rc7). No changes have been made, the DTs are exact copies. Furthermore add the DTB to dh_imx6_defconfig. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20imx: imx8mp_rsb3720a1: convert to DM_SERIALPeng Fan2-0/+2
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx8mp_rsb3720a1: Enable cache in SPLFabio Estevam2-4/+0
There is no reason for disabling I-cache and D-cache in SPL. Remove the unneeded CONFIG_SPL_SYS_ICACHE_OFF and CONFIG_SPL_SYS_DCACHE_OFF options. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-05-20cgtqmx8: Enable cache in SPLFabio Estevam1-2/+0
There is no reason for disabling I-cache and D-cache in SPL. Remove the unneeded CONFIG_SPL_SYS_ICACHE_OFF and CONFIG_SPL_SYS_DCACHE_OFF options. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx8mm-cl-iot-gate: Enable cache in SPLFabio Estevam2-4/+0
There is no reason for disabling I-cache and D-cache in SPL. Remove the unneeded CONFIG_SPL_SYS_ICACHE_OFF and CONFIG_SPL_SYS_DCACHE_OFF options. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-05-20bosch: Add initial board support for ACCPhilip Oberfichtner1-0/+110
The Bosch ACC (Air Center Control) Board is based on the i.MX6D. The device tree is copied from Linux, see [1]. The only difference compared to the Linux DT is the removal of usbphynop properties. They are defined in the Linux version of imx6qdl.dtsi, but not in the u-boot version. [1] Commit 6192cf8ac082 from git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git Signed-off-by: Philip Oberfichtner <pro@denx.de>
2022-05-20kontron-sl-mx8mm: Select the CONFIG_CMD_UNZIP optionFabio Estevam1-1/+1
Select the CMD_UNZIP option so that the 'gzwrite' command can be used to flash wic.gz image into the eMMC. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-05-20imx: imx8mp_evk: enable pinctrl_wdog in SPLPeng Fan1-1/+0
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code, The set_wdog_reset() function is not necessary as this is handled by the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property being set. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-20imx: imx8mq-phanbell: enable CONFIG_DM_SERIALPeng Fan1-0/+1
Marked related nodes as u-boot,dm-spl for serial driver model Enable CONFIG_DM_SERIAL Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx: imx8mq-pico: enable CONFIG_DM_SERIALPeng Fan1-0/+1
Marked related nodes as u-boot,dm-spl for serial driver model Enable CONFIG_DM_SERIAL Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx: imx8mq-cm: enable CONFIG_DM_SERIALPeng Fan1-0/+1
Marked related nodes as u-boot,dm-spl for serial driver model Enable CONFIG_DM_SERIAL Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx: imx8mm_edm_sbc: Enable SPL_DM_SERIALPeng Fan1-1/+0
Enable CONFIG_SPL_DM_SERIAL. uart and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20imx: imx8mm_mx8menlo: Enable DM_SERIALPeng Fan1-0/+1
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-05-20board: gateworks: venice: enable SPL_DM_SERIALTim Harvey3-3/+0
The uart2 and its pinmux are already marked with u-boot,dm-spl but we need to move the call to preloader_console_init() after spl_early_init() to avoid a board hang as dm can't be used until after spl_early_init() due to the uart driver not enabling the uart clock. Remove the manual config of the UART pinmux now that it is no longer needed. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2022-05-19mx6sllevk: Remove duplicated "mmc dev" commandFabio Estevam2-2/+2
The "mmc dev ${mmcdev}" command is done twice. Remove one ocurrence to avoid the duplication. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-05-19mx6slevk: Remove duplicated "mmc dev" commandFabio Estevam3-3/+3
The "mmc dev ${mmcdev}" command is done twice. Remove one ocurrence to avoid the duplication. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-05-19imx8mn_ddr4_evk: Add USB Mass Storage supportFabio Estevam1-0/+12
Add USB Mass Storage support, which is a convenient way to flash the eMMC card, for example. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-05-17mvebu: uDPU: include fixed-phy supportRobert Marko1-0/+1
uDPU relies on using fixed-phy for the SFP support, and since the fixed-phy parsing was moved to the generic driver instead of mvneta networking stopped working on uDPU with: uDPU>> dhcp dm_eth_phy_connect failed This is due to the conversion commit not enabling fixed-phy support in defconfig like it did for other boards. Fixes: 77fcf3cf1251 ("net: mvneta: Convert to use PHY_FIXED for fixed-link") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-17arm: mvebu: turris_{omnia,mox}: Enable CONFIG_NETCONSOLEPali Rohár2-0/+2
This allows to use U-Boot console on Turris devices via network. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-17arm: mvebu: Fix DEBUG_UART_BASE for all 32-bit boardsPali Rohár10-10/+20
UART base address is located in internal registers. Internal registers for 32-bit mvebu boards in SPL are at address 0xd0000000 and in proper U-Boot at address 0xf1000000. Fix DEBUG_UART_BASE option for all 32-bit mvebu boards. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-17arm: mvebu: turris_omnia: Fix DEBUG_UART_BASEPali Rohár1-1/+2
Internal registers in SPL are at address 0xd0000000 and in proper U-Boot at address 0xf1000000. UART base address is located in internal registers. Fix DEBUG_UART_BASE option to correct value for both SPL and proper U-Boot. This change fixes hangup of proper U-Boot when it is trying to print something via debug UART. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-11Convert CONFIG_MTD_CONCAT to KconfigChris Packham1-0/+1
This converts the following to Kconfig: CONFIG_MTD_CONCAT Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-11spl: Rename Kconfig SPL_LEGACY_IMAGE_SUPPORT to SPL_LEGACY_IMAGE_FORMATAndrew Davis10-10/+10
This matches what this support is called in the non-SPL case. The postfix _SUPPORT is redundant as enabling Kconfig options implies support. With this we can use CONFIG_IS_ENABLED() as needed. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-05-10Merge tag 'u-boot-stm32-20220510' of ↵WIP/10May2022Tom Rini11-16/+332
https://source.denx.de/u-boot/custodians/u-boot-stm Add new STM32 MCU boards and Documentation STM32 programmer improvements video: support several LTDC HW versions and fix data enable polarity board: fix stboard error message, consider USB cable connected when boot device is USB configs: stm32mp1: set console variable for extlinux.conf configs: stm32mp1: add support for baudrate higher than 115200 for ST-Link ARM: stm32mp: Fix Silicon version handling and ft_system_setup() phy: stm32-usbphyc: Add DT phy tuning support arm: dts: stm32mp15: alignment with v5.18 ram: Conditionally enable ASR mach-stm32mp: psci: retain MCUDIVR, PLL3CR, PLL4CR, MSSCKSELR across suspend configs: Use TFTP_TSIZE on DHSOM and STMicroelectronics boards ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOM pinctrl: stm32: rework GPIO holes management
2022-05-10configs: stm32746g-eval: Add stm32746g-eval_spl_defconfigPatrice Chotard1-0/+86
Add stm32746g-eval_spl_defconfig for stm32746g evaluation board to build SPL. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32746g-eval: Add stm32746g-eval_defconfigPatrice Chotard1-0/+64
Add stm32746g-eval_defconfig for stm32746g evaluation board to build U-Boot proper. Full board description can be found here : https://www.st.com/en/evaluation-tools/stm32746g-eval.html Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32f746-disco: Migrate SPL flags to defconfigPatrice Chotard1-4/+20
Migrate SPL flags to stm32f746-disco_spl_defconfig Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32f769-disco: Migrate SPL flags to defconfigPatrice Chotard1-4/+21
Migrate SPL flags to stm32f769-disco_spl_defconfig Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32f769-disco: Add stm32f769-disco_defconfigPatrice Chotard1-0/+65
Add stm32f769-disco_defconfig for stm32f769 discovery board to build U-Boot proper. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32f769-disco: Rename stm32f769-disco_defconfig to ↵Patrice Chotard1-0/+0
stm32f769-disco_spl_defconfig The current stm32f769-disco_defconfig file supports SPL, rename it to stm32f769-disco_spl_defconfig to reflect the supported configuration. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32f746-disco: Add stm32f746-disco_defconfigPatrice Chotard1-0/+64
Add stm32f746-disco_defconfig for stm32f746 discovery board to build U-Boot proper. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32f746-disco: Rename stm32f746-disco_defconfig to ↵Patrice Chotard1-0/+0
stm32f746-disco_spl_defconfig The current stm32f746-disco_defconfig file supports SPL, rename it to stm32f746-disco_spl_defconfig to reflect the supported configuration. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10configs: stm32f746-disco: Concatenate spl and u-boot binariesPatrice Chotard1-0/+1
This allows to concatenate spl and u-boot binaries together. Previously, both binaries has to be flashed separately at the correct offset (spl at offset 0 and u-boot at offset 0x8000). With this patch, only one binary is generated (u-boot-with-spl.bin) and has to be copied in flash at offset 0 using openocd for example or simply copied in exported mass storage. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-05-10ARM: stm32: Use CONFIG_TFTP_TSIZE on STMicroelectronics boardsPatrick Delaunay3-0/+3
Long TFTP transfers lead to a wall of # characters on UART, which in the end may slow down the transfer itself. Use CONFIG_TFTP_TSIZE to print progress in fewer # characters. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10ARM: stm32: Use CONFIG_TFTP_TSIZE on DHSOMMarek Vasut2-0/+2
Long TFTP transfers lead to a wall of # characters on UART, which in the end may slow down the transfer itself. Use CONFIG_TFTP_TSIZE to print progress in fewer # characters. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-10ARM: stm32: Use default CONFIG_TFTP_BLOCKSIZE on DHSOMMarek Vasut2-2/+0
The DHCOM does ship with KS8851 with 1.5 kiB packet buffer. The DHSOM may be extended with other MAC options connected to FMC2 bus, like the DM9000, wih similar limitations. Use default CONFIG_TFTP_BLOCKSIZE of 1468 Bytes instead of 1536 Bytes, which always avoids overflowing the packet buffers of such limited MACs, which leads to e.g. TFTP timeouts. This also avoids receiving a short packet fragment at the end of each TFTP block, which led to reduced performance. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-05-09config: enable TPS65219 for am64x_evm_a53 boardsNeil Armstrong1-0/+6
The E4 revision of the AM64 SKEVM embeds a TPS65219 PMIC, this enables the necessary options to load and control the PMIC regulators. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2022-05-09Nokia RX-51: Convert to CONFIG_DM_SERIALPali Rohár1-3/+2
For CONFIG_DM_SERIAL it is required to increase CONFIG_SYS_MALLOC_F_LEN as default value is not enough for memory hungry CONFIG_DM_SERIAL code. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Merlijn Wajer <merlijn@wizzup.org>
2022-05-09Nokia RX-51: Enable CONFIG_SUPPORT_RAW_INITRDPali Rohár1-0/+1
This enable booting of Debian systems which use raw initrd image (instead of uInitrd created by mkimage). This change increase size of u-boot.bin binary by just 64 bytes. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-09configs: am335x_guardian: Enable DM_I2CGireesh Hiremath1-2/+2
Move from I2C legacy to the DM I2C version Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-05-05configs: Resync with savedefconfigTom Rini47-93/+49
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-05arm: nuvoton: Add support for Nuvoton NPCM750 BMCJim Liu1-0/+40
Add basic support for the Nuvoton NPCM750 EVB (Poleg). Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
generated by cgit v1.1 at 2024-07-15 12:09:30 +0000