aboutsummaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2021-04-20Add support for stack-protectorJoel Peshkin1-0/+2
Add support for stack protector for UBOOT, SPL, and TPL as well as new pytest for stackprotector Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com> Adjust UEFI build flags. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20arm: highbank: Do DRAM init from DTAndre Przywara1-1/+1
So far U-Boot was hard coding a (surely sufficient) memory size of 512 MB, even though all machines out there have at least 4GB of DRAM. Since U-Boot uses its memory knowledge to populate the EFI memory map, we are missing out here, at best losing everything beyond 4GB on Midway boxes (which typically come with 8GB of DRAM). Since the management processor populated the DT memory node already with the detected DRAM size and configuration, we use that to populate U-Boot's memory bank information, which is the base for the UEFI memory map. This finally allows us to get rid of the NR_DRAM_BANKS=0 hack, that we had in place to avoid U-Boot messing up the DT memory node before loading the kernel. Also, to cover the whole of memory, we need to enable PHYS_64BIT. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20net: calxedagmac: Convert to DM_ETHAndre Przywara1-0/+1
To squash that nasty warning message and make better use of the newly gained OF_CONTROL feature, let's convert the calxedagmac driver to the "new" driver model. The conversion is pretty straight forward, mostly just adjusting the use of the involved data structures. The only actual change is the required split of the receive routine into a receive and free_pkt part. Also this allows us to get rid of the hardcoded platform information and explicit init calls. This also uses the opportunity to wrap the code decoding the MMIO register base address, to make it safe for using PHYS_64BIT later. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-20arm: highbank: Enable OF_CONTROLAndre Przywara1-0/+1
All Calxeda machines are actually a poster book example of device tree usage: the DT is loaded from flash by the management processor into DRAM, the memory node is populated with the detected DRAM size and this DT is then handed over to the kernel. So it's a shame that U-Boot didn't participate in this chain, but fortunately this is easy to fix: Define CONFIG_OF_CONTROL and CONFIG_OF_BOARD, and provide a trivial function to tell U-Boot about the (fixed) location of the DTB in DRAM. Then enable DM_SERIAL, to let the PL011 driver pick up the UART platform data from the DT. Also define AHCI, to bring this driver into the driver model world as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-20arm: octeontx: enable WDT_SBSATim Harvey1-0/+1
The OcteonTX uses ARM's SBSA Watchdog device Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-20arm: octeontx: move CONFIG_SUPPORT_RAW_INITRD to configsTim Harvey2-0/+2
Move CONFIG_SUPPORT_RAW_INITRD out of the octeontx_common header and into the defconfig files. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-20sandbox: enable IRQ using select for sandbox architectureWasim Khan4-4/+0
Enable IRQ using select for sandbox architecture. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-20configs: khadas-vim3: enable PCIe and NVMeNeil Armstrong2-0/+10
Now we have PCIe, let's also enable NVMe to access an eventual NVMe SSDs connected on the M.2 slot. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-18Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini1-1/+7
This is a patchset which makes away with the .bind() controller indexing workaround which was broken since before v2021.04, and then adds PHY support and MX8M support on top of that. Better add it into the release early to get as much testing as possible done, because this really does a lot of changes to the ehci-mx6 driver.
2021-04-18Merge tag 'ti-v2021.07-rc1' of ↵Tom Rini3-0/+3
https://source.denx.de/u-boot/custodians/u-boot-ti - Support for pinmux status command on beaglebone - Updates for MMC speed modes for J721e-evm - Fix MMC booting on omap35_logic_somlv board
2021-04-18ARM: imx8m: verdin-imx8mm: Enable USB Host supportMarek Vasut1-1/+7
Enable USB host support on MX8MM Verdin. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-15configs: T1042D4RDB: enable DM_ETHCamelia Groza5-2/+18
Enable DM_ETH and DM_MDIO for the T1042D4RDB. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15configs: T4240RDB: enable DM_ETHCamelia Groza2-0/+6
Enable DM_ETH and DM_MDIO for the T4240RDB. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15configs: T2080RDB: enable DM_ETHCamelia Groza4-0/+12
Enable DM_ETH and DM_MDIO for the T2080RDB. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15board: sl28: move DM_* configs to KconfigMichael Walle1-17/+0
Move the CONFIG_DM_* from the defconfig to the TARGET_SL28 config. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15ppc: qemu: Enable eTSEC supportBin Meng1-0/+4
QEMU ppce500 target can dynamically instantiate an eTSEC device if "-device eTSEC" is given to QEMU. This commit enables eTSEC driver and the required fixed PHY driver to create a usable network configuration using eTSEC. Unlike a real world 85xx board that usually stores the eTSEC MAC address in an EEPROM, CONFIG_NET_RANDOM_ETHADDR is required for QEMU otherwise U-Boot ethernet initialization complains no valid ethernet address is set. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15ppc: qemu: Create a virtual memory mapping of the platform busBin Meng1-0/+1
QEMU ppce500 target can dynamically instantiate an eTSEC device on a platform bus if "-device eTSEC" is given to QEMU. It is presented as a "simple-bus" in the device tree, with an additional compatible string "qemu,platform". Let's create a virtual memory mapping for it in misc_init_r(), in preparation to adding eTSEC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15board/km: add support for seli8 design based on nxp ls102xAleksandar Gerasimovski1-0/+70
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids XMC and FOX product lines. It is based on NXP LS1021 SoC and it provides following interfaces: - IFC interface for NOR, NAND and external FPGA's - 1 x RGMII ETH for debug purposes - 2 x SGMII ETH for management communication via back-plane - 1 x uQE HDLC for management communication via back-plane - 1 x I2C for peripheral devices - 1 x SPI for peripheral devices - 1 x UART for debug logging It is foreseen that the design will be later re-used for another XMC and FOX service cards with similar SoC requirements. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-12test: qemu: add qfw sandbox driver, dm tests, qemu testsAsherah Connor2-2/+0
A sandbox driver and test are added for the qfw uclass, and a test in QEMU added for qfw functionality to confirm it doesn't break in real world use. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12firmware: scmi: sandbox test for voltage regulatorEtienne Carriere1-0/+1
Implement sandbox regulator devices for SCMI voltage domains and test them in DM scmi tests. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-12cmd: xtrace: Convert to boolSean Anderson2-2/+2
This variable is a boolean, not a string. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-12Tegra: remove e2220-1170 boardPeter Robinson1-48/+0
It's an old bringup board with out upstream Linux or L4T support Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2021-04-12test: pinmux: add test for 'pinctrl-single' driverDario Binacchi2-0/+2
The test adds two pinmux nodes to the device tree, one to test when a register changes only one pin's mux (pinctrl-single,pins), and the other to test when more than one pin's mux is changed (pinctrl-single,bits). This required replacing the controller's register access functions when the driver is used on sandbox. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12configs: omap35_logic_somlv: Fix MMC bootingAdam Ford1-0/+1
A previous patch had removed the GPIO nodes from being built into the SPL Device tree, but CONFIG_SPL_GPIO_SUPPORT remained which makes the MMC card detect fail and the board does not boot. Fix this by disabling CONFIG_SPL_GPIO_SUPPORT. Fixes: 6f1efe81aa84 ("configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL size") Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-10ppc: Remove MPC837XEMDS boardTom Rini3-499/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10ppc: Remove Cyrus_P5020 and P5040 boardsTom Rini2-96/+0
These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. As the P5020 is the last ARCH_P5020 platform, remove that support as well. Cc: Andy Fleming <afleming@gmail.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-10ppc: Remove controlcenterd boardsTom Rini4-210/+0
These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. Cc: Mario Six <mario.six@gdsys.cc> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10ppc: Remove gdsys hrcon boardsTom Rini2-292/+0
These boards have not been converted to CONFIG_DM_MMC, along with other DM conversions, by the deadline. Remove them. Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10ppc: Remove gdsys strider boardsTom Rini4-584/+0
These boards have not been converted to CONFIG_DM_MMC, along with other DM conversions, by the deadline. Remove them. Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10ppc: Remove MPC8308RDB boardTom Rini1-152/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10ppc: Remove T2081QDS board and ARCH_T2081 supportTom Rini5-346/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. It is also the only ARCH_T2081 board so remove that support as well. Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com> Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove tqma6s_wru4_mmc configTom Rini1-82/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove mx6dlarm2 boardTom Rini4-164/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jason Liu <jason.hui.liu@nxp.com> Cc: Ye Li <ye.li@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove cgtqmx6eval boardTom Rini1-99/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove titanium boardTom Rini1-55/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove ts4800 boardTom Rini1-30/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Lucile Quirion <lucile.quirion@savoirfairelinux.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove mx53evk boardTom Rini1-25/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove pfla02 boardTom Rini1-75/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove zc5202 and zc5601 boardsTom Rini2-122/+0
These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove xpress boardTom Rini2-103/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove kc1 boardTom Rini1-40/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove am3517_crane boardTom Rini1-43/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Nagendra T S <nagendra@mistralsolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove omap3_ha boardTom Rini2-94/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese <sr@denx.de> Cc: Tapani Utriainen <linuxfae@technexion.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove tricorder boardTom Rini2-108/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Thomas Weber <weber@corscience.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove platinum_picon boardTom Rini2-136/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove Broadcom Cygnus boardsTom Rini7-209/+0
These boards have not been converted to CONFIG_DM by the deadline. Remove them. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove bcm23550_w1d boardTom Rini1-47/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove bcm28155_ap boardTom Rini4-165/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Steve Rae <steve.rae@raedomain.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove picosam9g45 boardTom Rini1-48/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Erik van Luijk <evanluijk@interact.nl> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10arm: Remove wb50n boardTom Rini1-53/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Ben Whitten <ben.whitten@lairdtech.com> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-11-17 15:47:26 +0000